BMW Motor Mounts

Increase drivetrain rigidity and put that power to the ground! This industry-leading encapsulated design reduces NVH and prevents heat transfer.

From the factory, all BMW models are equipped with soft rubber or fluid-filled engine mounts. While these mounts perform well at isolating drivetrain vibrations, they are prone to degradation and allow for significant drivetrain movement. This often results in a loose-feeling driveline, missed shifts, and a generally disconnected driving feel.

To address these issues, We have developed a performance alternative. Constructed from 6061 Billet Aluminum, these mounts are built to last. While most performance drivetrain mounts feature solid or polyurethane-bonded aluminum construction, the engineers at Turner designed a unique four-piece design that disburses NVH (noise, vibration, and harshness). This multi-piece design offers the added benefit of serviceability. Additionally, encapsulating the polyurethane and adding a TecaPeek isolator prevents heat transfer to the insert, increasing the lifespan and durability of the mount.

Features & Benefits:

High-strength 6061 billet aluminum construction
80A Polyurethane provides a considerable increase over stock rubber durometer, eliminating excess deflection and ensuring drivetrain stiffness.
Instead of the typical polyurethane-bonded aluminum construction, this mount is encapsulated to reduce NVH (noise, vibration, and harshness).
Finished in black hard-coat anodized for a clean, durable, and corrosion-resistant finish.
TecaPeek isolator reduces heat transfer from the engine to the mount insert, increasing the lifespan of the mount.
A simple bolt-on design makes for an easy install
Replace your worn-out factory engine mounts and experience increased drivetrain rigidity, reduced deflection, and more precise shifting. Our Turner Performance Polyurethane Engine Mount Set is designed for maximum durability and strength while maintaining the perfect balance between stiffness and comfort—the perfect choice for your high-horsepower BMW!

If allowed in the rules these solid aluminum engine and transmission mounts offer many advantages over urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. These are machined from solid aluminum and have zero deflection, engine torque will cause a rubber or urethane mount to flex or deflect allowing more torque to passed through the drive line (instead of being wasted winding up the mount). When paired with our flex-free solid transmission mounts you'll get smoother, crisper shifts since the transmission is no longer dancing on the pliable mount. This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of motor and transmission mounts you will ever need. We very strongly recommend using the solid transmission and engine mounts together as a complete kit, mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid engine mount unless a corresponding solid transmission mount is also used.

These are a no-compromise design for all-out racing use, full solid aluminum mounts should not be used on street-driven cars since there is no material to absorb vibration making these quite harsh for regular street use (track cars don't care about noise).

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• Precision machined billet 6061-T6 aluminum housing
• Black anodized for durability and corrosion resistance
• Grade 10.9 stud - fear not, big turbo owners
• Engineered in-house and made in America

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335i - Sedan
2007-2011 E91 BMW 325i 328i - Touring Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rubber engine and transmission mounts for a street car and solid aluminum for the track, right? Well, it's not that straightforward anymore.

Stock rubber fluid-filled mounts are designed to be soft and comfortable, limiting the NVH (noise, vibration, and harshness) felt by the driver. The drawback inherent with a conventional design is driveline deflection, making it more difficult to put the power to the wheels, as well as making a money-shift or miss-shift more likely as they age. Solid mounts are exactly the opposite of this - they permit tons of NVH while offering zero deflection, making these a must have for track-driven vehicles looking to capitalize on every ounce of performance available. Enthusiasts looking to find the best of both worlds often look to polyurethane engine mounts - and many are disappointed with other designs on the market. Seeking a mount that offers a positive connection yet doesn't deform, fail, or rattle the fillings out of their mouths is frequently a lost cause.

Until now. 

We engineered these mounts with these very concerns in mind. We know if a soft mount offers a sloppy connection it doesn't work on the track, and a solid mount isn't acceptable as a daily driver (for most!) and set out to engineer a mount that would meet the needs for both. At the core of our enclosed design is a partially-constrained, multi-piece polyurethane bushing with precisely-set preload. This architecture absorbs and disperses resonant engine frequencies as opposed to amplifying them (like some other designs do), which results in a positive-connection, enthusiast-feel mount with the vibration. Understanding that heat is a concern for the passenger side mount's close proximity to the exhaust, we utilize a PEEK thermal insulation plate to greatly reduce heat transfer to the polyurethane, making heat a non-issue for these mounts. 

We offer two durometers, with both densities offering similar "positive connection" feeling. 60A is slightly softer and offers more of a stock feel, while 80A delivers a little more engine "feel" while under acceleration. 

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• High quality polyurethane offered in both 60A & 80A durometers (rebuildable, too)
• Resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber.
• Precision machined billet 6061-T6 aluminum housing, black anodized for durability and corrosion resistance. Grade 10.9 stud - fear not, big turbo owners.
• Thermal isolation spacer on the hot side to resist heat transfer into the poly
• Engineered in-house and made in America

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

MINI R56 N14 N18 Upper Engine Mount Insert is crafted from high-quality Yellow 70A durometer material, offering a perfect balance of strength and compliance. This insert enhances performance by reducing engine movement while minimizing noise, vibration, and harshness (NVH) inside the cabin. Ideal for both gas models and high-torque tuned diesel models, it ensures a smoother and more responsive driving experience.

• Improved Performance: Provides enhanced engine stability and reduced movement.
• Reduced NVH: Limits noise, vibration, and harshness transmission into the cabin.
• High-Quality Material: Made from Yellow 70A durometer material for strength and compliance.
• Versatile Application: Suitable for both gas models and high-torque tuned diesel models.
• Direct Replacement: Matches OEM part numbers for easy fitment.

OEM Part Numbers: 22114050886 / 22 11 4 050 886, 22116782374 / 22 11 6 782 374, 4050886 / 6782374.

MINI Gen 1 Upper Engine Mount Bushing - Supplement improves engine stability by reducing excessive movement. OEM rubber bushings prioritize comfort, which can lead to suboptimal engine retention and increased engine movement. Powerflex polyurethane engine mount bushings offer a firmer alternative that minimizes slop and maximizes performance.

• Reduced Engine Movement: Firmer than factory rubber bushings, enhancing engine stability.
• Improved Performance: Polyurethane bushings provide a more precise fit and function.
• Durable Construction: Built to last longer than OEM rubber bushings.
• Enhanced Driving Experience: Allows for better handling and engine response.
• Recommended Maintenance: Use Powerflex Copper Grease PCG1 for easier installation and extend bushings' squeak-free life.
• Versatile Use: Ideal for street-driven vehicles, occasional autocross, or track time; Powerflex Black Series is recommended for dedicated track cars.
• Lifetime Warranty: Powerflex offers a lifetime warranty to the original purchaser.

MINI F54 to F57 Race Polyurethane Engine Support Bushing - Large is designed to improve engine stability and performance by reducing engine movement. Unlike OEM rubber bushings that prioritize comfort, these Powerflex polyurethane bushings are firmer and more durable, ensuring optimal engine retention and reduced engine slop.

Powerflex, Europe's top-selling suspension bushing manufacturer, utilizes state-of-the-art techniques to produce these exact-fit, premium performance bushings. Built to last longer than OEM rubber bushings, they enhance performance and provide a more engaging driving experience.

• Reduces engine movement for improved stability
• Firmer and more durable than OEM rubber bushings
• Ensures optimal engine retention
• Enhances performance and driving experience
• Exact-fit manufacturing for easy installation
• Recommended use of Powerflex Copper Grease PCG1 for installation
• Suitable for both track and street-driven vehicles
• Backed by Powerflex Lifetime Warranty

MINI R50 to R53 Performance Polyurethane Gearbox Bushing Set is designed to enhance engine stability and performance by reducing unnecessary movement. Unlike OEM rubber bushings, which prioritize comfort over function, these Powerflex polyurethane bushings offer increased firmness and durability. This set minimizes engine and transmission movement, ensuring more precise and controlled driving dynamics. Powerflex, Europe's leading manufacturer of suspension bushings, uses advanced polyurethane material and precision manufacturing to create bushings that outperform and outlast factory options. Ideal for both daily driving and occasional track use, these bushings contribute to a more engaging driving experience. For optimal performance, it is recommended to use Powerflex Copper Grease PCG1 during installation and to periodically reapply it to maintain a squeak-free operation.

• Enhanced Stability: Reduces engine and transmission movement for better control.
• Improved Performance: Firmer than OEM rubber bushings, offering a more engaging driving experience.
• Durable Construction: Powerflex's advanced polyurethane material ensures longevity and reliability.
• Precision Engineering: Exact-fit standards for superior performance.
• Versatile Use: Suitable for street driving with occasional track time; for dedicated track cars, consider Powerflex Black Series bushings.
• Lifetime Warranty: Offered by Powerflex to the original purchaser.