Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Arc Terminator - Corporate Logo
T#:26471609
Part#: AT231F22BLA40MN5
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less
Bosch - Corporate Logo
T#:639283
Part#: 30757534
In Stock
$ 88.99

This product was last offered at the strikethrough price on
05-07-2026

$ 75.99 USD
Free Shipping on orders $49 and up
$ 75.99 USD
Free Shipping on orders $49 and up
**Requires plug adapters EV6 / EV14 / USCAR to EV1**
DeatschWerks - Corporate Logo
T#:6091446
Part#: 9-651-1030
In Stock at Vendor
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. The DW65c was the industry's first compact fitment high flow pump. The compact fitment offers easy installation into many modern fuel pump modules where standard sized pumps (such as DW100, DW200, and DW300) cannot be fitted. This pump comes with the proper installation kit for the E30 325i and M3 for model years 1988-1991. The DW65c flows 265lph at 40psi and features a quiet and reliable turbine impeller which is compatible with pulse width modulated pump drivers. The pump also features an encapsulated armature for compatibility with ethanol based fuels. All DW fuel pumps are backed by a 3-yr no fault warranty. Features: Weight 10.1 oz (285grams) 7.77mm ID/11mm OD inlet fitting Outlet 5/16" Hose Clamp Single Scroll Composite Turbine All instructions are also provided on DeatschWerks' website.
Show More Show Less

DeatschWerks - Corporate Logo
T#:6106371
Part#: 9-401-1052
In Stock at Vendor
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
Take the complexity out of fuel system plumbing with the DeatschWerks 9-401-1052 Fuel Pump Install Kit.

Fuel Pump
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:384686
Part#: 16146752368
Ships in 1 Business Day
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
Does not include level sensor or sending unit.
Genuine BMW - Corporate Logo
T#:213944
Part#: 13538643665
In Stock
9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping
9% off MSRP
$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping


Genuine BMW Sensor, High-Pressure
This item fits the following BMW Chassis:
i8


Genuine BMW - Corporate Logo
T#:43840
Part#: 13907838439
Ships in 1-2 days
4% off MSRP $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD
Free Shipping on orders $49 and up
This hose connects to the fuel breather, aiding in directing excess fuel pressure out of the tank.
Genuine BMW - Corporate Logo
T#:15067
Part#: 16147163296
Ships in 1-2 days
8% off MSRP $ 268.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 246.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 268.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 246.99 USD
Free Shipping on orders $49 and up
This Genuine BMW fuel filter/fuel pressure regulator is located in the fuel tank on the left hand side. BMW officially claims these are "lifetime"units, but in practice We recommend preventative replacement of the fuel filter at 60-80,000 mile intervals.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Often a clogged fuel filter can cause any number of driveability issues including stalling and cold start problems. br>
This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2007-2010 E90 BMW 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:43911
Part#: 16111177346
Ships in 1-2 days
$ 21.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket Left

This item fits the following BMW Chassis:
E30 M3,E30

Fits BMW Engines including:
M10,M20,M42,S14


Genuine BMW - Corporate Logo
T#:45440
Part#: 16146752371
Ships in 1-2 days
3% off MSRP $ 666.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.99 USD
Free Shipping
3% off MSRP
$ 666.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.99 USD
Free Shipping


Genuine BMW Right Fuel Level Sensor
This item fits the following BMW Chassis:
E39 M5,E39

Fits BMW Engines including:
S62

Genuine BMW - Corporate Logo
T#:42038
Part#: 13531717073
Ships on Nov 3, 2026
2% off MSRP $ 188.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 188.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD
Free Shipping on orders $49 and up


Genuine BMW Injection Tube -
This item fits the following BMW Chassis:
E30

Fits BMW Engines including:
M20

Precision Raceworks - Corporate Logo
T#:38161679
Part#: 201-0410
Ships in 4 Business Days
$ 49.00 USD
Free Shipping on orders $49 and up
Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.


Precision Raceworks - Corporate Logo
T#:8169508
Part#: 601-0116
Ships in 5 Business Days
$ 594.99 USD
Free Shipping
$ 594.99 USD
Free Shipping
The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No
Show More Show Less
High-Pressure Fuel Pump Replacement Kit - N55
10X Entries Into Our F80 M3 Sweepstakes
First time replacement will require T#199513 Adapter for vehicles with production date up to 12/2013
Packaged by Turner - Corporate Logo
T#:3165724
Part#: 13518604231KT2
In Stock
$ 388.99

This product was last offered at the strikethrough price on
09-22-2026

$ 374.99 USD
Free Shipping
$ 374.99 USD
Free Shipping
This kit includes new HPFP gaskets needed for a complete and easy install. The fuel pump is the heart of your car, pumping fuel to the engine and making your car run. If your fuel pump is broken, replace it with this original BMW part. If your fuel filter is clogged, you must replace the entire fuel pump assembly.
Show More Show Less
Walbro - Corporate Logo
T#:23020149
Part#: F90000295
In Stock
$ 203.99 USD
Free Shipping on orders $49 and up

New DCSS 39/50 High-Performance Pump – F90000295

  • Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
  • No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
  • Featuring award-winning DCSS technology
  • E85 compatible
  • High-pressure relief setting - supports supercharger and turbo applications
  • Capable of supporting 900+HP at 60PSI naturally aspirated applications
  • Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less

OES MINI - Corporate Logo
T#:402698
Part#: 13517588879
In Stock
$ 832.99 USD
Free Shipping
$ 832.99 USD
Free Shipping

This Original Equipment Supplier MINI Cooper metal pump located in the engine bay boost pressure for the direct inject system.

Includes sealing o ring.

Connects from fuel feed to the fuel rail pressure line.

Show More Show Less

Bavarian Autosport - Corporate Logo
T#:639835
Part#: 13537537319
In Stock
Sale - Save 15% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Located at the rear of the high-pressure fuel rail, this pressure sensor relays fuel pressure information to the vehicle's DME/ECS and is a common source of fault codes. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Genuine BMW - Corporate Logo
T#:12511
Part#: 13907557924
In Stock
3% off MSRP $ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 35.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 35.99 USD
Free Shipping on orders $49 and up


Genuine BMW Fuel Tank Breather Line -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E85

Fits BMW Engines including:
M54


Genuine BMW - Corporate Logo
T#:367877
Part#: 16116750564
In Stock
3% off MSRP $ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
Replace your damaged or missing non-locking fuel tank cap with this direct replacement cap.
Motiv Motorsports - Corporate Logo
T#:49648341
Part#: 910.1027
In Stock
$ 1,344.00 USD
Free Shipping on orders $49 and up
NOTE: Select PT-CAN2 for all MHD+ and EcuTek cars with automatic transmissions. For BM3 and all manual transmission cars select PT-CAN.

Bosch - Corporate Logo
T#:50031893
Part#: BB58AFIRKT
In Stock
$ 546.99

This product was last offered at the strikethrough price on
08-07-2026

$ 536.99 USD
Free Shipping on orders $49 and up
$ 536.99 USD
Free Shipping on orders $49 and up
This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

URO Fuel Pump O-Ring - 16117188567
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:28271184
Part#: 16117188567
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up

Key Features:

Ensures a perfect fit for your vehicle Instantly restores proper sealing and fuel delivery by replacing the failed fuel pump o-ring Features a direct-fit OE-style design for easy installation and extended durability Crafted from high-quality elastomer material capable of withstanding exposure to corrosive hydrocarbon fuel and intense vehicle heat

Show More Show Less
High Pressure Fuel Pressure Sensor V7540439
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:23449739
Part#: 13537568050
In Stock
Sale - Save 5% $ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 53.19 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 53.19 USD
Free Shipping on orders $49 and up

For your Mini's fuel system, the fuel injection pressure sensor is crucial. However, it may occasionally malfunction. This component plays a key role in determining fuel pressure within the system. If it fails, it can affect engine performance and fuel efficiency. Replacing this sensor is essential to maintain optimal fuel delivery and engine functionality.

  • Crucial for fuel system functionality
  • Determines fuel injection pressure
  • Malfunction can impact engine performance
  • Ensures optimal fuel delivery and efficiency
Show More Show Less
Genuine BMW - Corporate Logo
T#:538308
Part#: 16137464301
Ships in 1-2 days
9% off MSRP $ 526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 481.99 USD
Free Shipping
9% off MSRP
$ 526.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 481.99 USD
Free Shipping
Genuine BMW replacement charcoal filter. If your getting evap codes or having trouble at the gas pump with the pump stopping often. The problem could be found with a blocked charcoal filter.


Genuine BMW - Corporate Logo
T#:41698
Part#: 13411247782
Ships Today
3% off MSRP $ 28.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 28.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping on orders $49 and up


Genuine BMW Air Hose - Nbr
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44

Vitesco Technologies - Corporate Logo
T#:38351604
Part#: 13517592429
In Stock
$ 896.99

This product was last offered at the strikethrough price on
06-16-2026

$ 844.99 USD
Free Shipping on orders $49 and up
$ 844.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:360719
Part#: 13321407299
Ships in 1-2 days
3% off MSRP $ 117.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
3% off MSRP
$ 117.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping

This OEM fuel filter is a must during any major service or tune-up. With a clogged or dirty filter, you are starving your engine of gasoline which can result in dangerous cutting out, rough running, or even a no-start situation. Bosch filters are premium grade filters that will keep your fuel system in top shape the same as, or better than, Genuine filters, without having to spend the Genuine BMW price. We recommend changing the fuel filter as part of a regular 30,000 mile tune-up. But you may want to replace it more often if your regular fuel quality is low.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. â All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Genuine BMW - Corporate Logo
T#:44348
Part#: 16117193372
In Stock
3% off MSRP $ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up


Genuine BMW Filler Cap -
This item fits the following BMW Chassis:
E39,F01,F02

Fits BMW Engines including:
M52,M62,N54,N55,N63N


Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
In Stock
$ 95.00 USD
Free Shipping on orders $49 and up
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less
Precision Raceworks - Corporate Logo
T#:40004858
Part#: 201-0261
Back Ordered
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!
Show More Show Less

Genuine BMW - Corporate Logo
T#:367889
Part#: 16146766942
In Stock
9% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD
Limited Qty Sale
Free Shipping
9% off MSRP
$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD
Limited Qty Sale
Free Shipping
Pierburg - Corporate Logo
T#:379853
Part#: 16146752369
Ships on Feb 16, 2027
$ 196.99 USD
Free Shipping
$ 196.99 USD
Free Shipping
Replaces just the part that failed - the pump.

Genuine BMW - Corporate Logo
T#:537209
Part#: 16117934453
In Stock
2% off MSRP $ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 128.99 USD
Free Shipping
2% off MSRP
$ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 128.99 USD
Free Shipping
If your gas gauge no longer reads, or if your fuel pump has failed, this is the replacement you will need!

Genuine BMW - Corporate Logo
T#:44620
Part#: 16121179682
In Stock
3% off MSRP $ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD
3% off MSRP
$ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD


Genuine BMW Fuel Return Line - L=1912mm
This item fits the following BMW Chassis:
E30

Fits BMW Engines including:
M20,M42

Bremmen Fuel Injector - BMW N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:640544
Part#: 13537531634
Ships in 3 Business Days
Sale - Save 10% $ 50.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.89 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 50.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.89 USD
Free Shipping on orders $49 and up
A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide-open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.
Show More Show Less
Spool Performance - Corporate Logo
T#:1241393
Part#: SP-54HX-1
In Stock
$ 849.00 USD
Free Shipping
$ 849.00 USD
Free Shipping
Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The N54/early n55 high-pressure pump is a very capable and over-engineered piece of hardware. They do a good job supplying fuel at high pressures at stock power levels. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in N54/early N55 fuel systems without the complexity of a secondary port injection system.
Show More Show Less


Genuine BMW - Corporate Logo
T#:11977
Part#: 16146752369
In Stock
6% off MSRP $ 757.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 713.99 USD
Free Shipping
6% off MSRP
$ 757.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 713.99 USD
Free Shipping
This is the in-tank fuel pump with rubber seal ring for E39 M5 with S62 engine. The level sensor is sold separately.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2000-2003 E39 BMW M5
Show More Show Less
Genuine BMW - Corporate Logo
T#:20704
Part#: 16111177925
Ships in 1-2 days
2% off MSRP $ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping
2% off MSRP
$ 200.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 195.99 USD
Free Shipping


Genuine BMW Connection Pipe

This item fits the following BMW Chassis:
E30 M3,E30

Fits BMW Engines including:
M10,M20,M42,S14

Genuine BMW - Corporate Logo
T#:348152
Part#: 13327831089
Ships Today
4% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:13141
Part#: 13641703819
In Stock
Sale - Save 8% $ 285.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 263.12 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 285.99

This product was last offered at the strikethrough price on
05-14-2026

$ 263.12 USD
Free Shipping on orders $49 and up
E36 328/M3 STOCK 21.5LB INJECTOR (PINK TOP)
Fits BMW Engines including:
M52,S52

Sold individually

DeatschWerks Performance Fuel Injector Set - 50lb/hr(550cc)
For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!
DeatschWerks - Corporate Logo
T#:6151339
Part#: 16U-00-0050-6
Ships in 6 Business Days
$ 403.99 USD
Free Shipping
$ 403.99 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 50lb/hr 550cc injectors. All relevant tuning data available on DeatschWerks website.
Show More Show Less
NRW Design - Corporate Logo
T#:40951290
Part#: S65PFF
Ships in 3 Business Days
$ 310.00 USD
Free Shipping on orders $49 and up
Perfect for preventative maintenance or performance upgrades, the E9X M3 S65 Inline Fuel Filter Kit - Gas Paper Filter is a smart addition to any BMW M3 owner's toolkit.

E90 / E92 / E93 EKP PNP Cooler Kit - (3 Series)
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26271821
Part#: E9X-EKP-PNP
Ships in 1 Business Day
Starting at $ 44.99 USD
Free Shipping on orders $49 and up
Starting at $ 44.99 USD
Free Shipping on orders $49 and up
This fully plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E9X BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. If you have an M3, you must choose an EKPM2 style cooler since the EKP Module has the same physical dimensions as an EKPM2. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8 (2007+ E9X), which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature. Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse
Show More Show Less
Race German - Corporate Logo
T#:6827872
Part#: RGBSCHM62NT
Ships in 2 Business Days
$ 41.99 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M62 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.
Show More Show Less

Arc Terminator - Corporate Logo
T#:26404814
Part#: SILENT-E90-EKP
Ships in 1 Business Day
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E9X BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8 (2007+ E9X), which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS, or PETG. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine Noctua 60mm or 40mm Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less

Race German - Corporate Logo
T#:6827857
Part#: RGBSCHEV1-4NT
Ships in 1 Business Day
$ 23.00 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Have low fuel pressure or rough running engine? Have leaks or broken pintle caps? It may be time to rebuild your fuel injectors. This is an easy refresh kit with all the necessary parts to rebuild your M42 fuel injectors. This kit includes all filters, spacers, o-rings, and caps needed for your type of injector. *Does not include fuel injector removal tool.
Show More Show Less
DeatschWerks - Corporate Logo
T#:6091471
Part#: 9-1031
Ships in 6 Business Days
$ 21.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's fuel pump with confidence using the DeatschWerks 9-1031 Installation Kit.
URO Fuel Pressure Regulator - 94411019803
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:28271166
Part#: 94411019803
Ships in 1 Business Day
$ 79.99 USD
Free Shipping on orders $49 and up

Features & Benefits:

Ensures Guaranteed Fitment Engineered to OEM Specifications for Consistent Fuel Supply Optimizes Gas Mileage Internal Diaphragm and Springs Prevent Lean or Rich Fuel Burns Over Time Ideal Replacement for Clogged Regulators, Improving Air-to-Fuel Ratio

Show More Show Less


E60 / E61 EKPM2 EKPM3 PNP Cooler Kit - (5 Series)
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26305056
Part#: E60-EKP-PNPC
Ships in 1 Business Day
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E60 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. There are two versions of the kit, one with a relay and one without a relay. The relay kit is for those who would prefer to not put an additional load on their 12v outlet circuit due to using that circuit for something with a high load already. The non-relay kit will work perfectly for any normal use of the 12v outlet circuit and only adds up to 0.30 amps onto that circuit, which is very minimal. For all M5s, you will need to use an EKPM2 kit as the EKP module is physically the same size as an EKPM2. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan and Fused Relay 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 2x 2 Amp Standard Blade Fuses Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less
Fuel Tank Level Sending Unit
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:18468287
Part#: 16146752370
In Stock
$ 124.99 USD
Free Shipping on orders $49 and up