Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

BC Racing - Corporate Logo
T#:568090
Part#: I-27E-BR
Ships on Nov 18, 2026
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:36811805
Part#: I-80-DS
Ships in 5 Business Days
$ 1,395.00 USD
Free Shipping
$ 1,395.00 USD
Free Shipping
BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
Show More Show Less
BC Racing - Corporate Logo
T#:588755
Part#: I-26-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
Show More Show Less

BC Racing - Corporate Logo
T#:51320833
Part#: I-114-DS
Ships in 5 Business Days
New Item
$ 1,415.00 USD
Free Shipping
$ 1,415.00 USD
Free Shipping
For the F31 Touring enthusiast who demands superior feedback and body control, the BC Racing DS Series utilizes a proprietary digressive piston design. This architecture provides increased damping force at low piston velocities—perfect for controlling body roll, dive, and squat during quick weight transitions—while transitioning to a linear curve at higher speeds to maintain compliance over bumps. Finished in a premium satin chrome, the DS Series is built for those who prioritize handling precision on technical roads and autocross courses. Like the BR series, it maintains full adjustability but offers a more sophisticated damping profile for the "Ultimate Driver Feel." Key Features: Digressive Piston Design: Enhanced low-speed damping to eliminate "wallow" and improve steering response and turn-in. Satin Chrome Finish: Premium aesthetic and improved corrosion resistance for the shock bodies. 30-Click Adjustment: Unified compression and rebound adjustment for simple, effective trackside tuning. Fixed Spring Seat: Ride height is adjusted via the bottom mount to preserve full stroke and prevent "bottoming out." Camber Plates Included: High-quality front pillow-ball camber plates for aggressive alignment specs. Specifications: Vehicle Fitment: 2012–2019 BMW 3-Series (F31) Touring Wagon (Models with 3-bolt front top mounts). Spring Rates (Default): Front: 6 kg/mm | Rear: 10 kg/mm. Optional Rates: Available with custom Front (up to 18kg) and Rear (up to 18kg) standard or Swift springs. Design: Mono-tube shock with digressive damping curve. Warranty: 2-Year limited manufacturer's warranty.
Show More Show Less

BC Racing - Corporate Logo
T#:49892348
Part#: I-14-DS-OFFC
Ships on Nov 18, 2026
$ 1,565.00 USD
Free Shipping
$ 1,565.00 USD
Free Shipping
BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
Show More Show Less
BC Racing - Corporate Logo
T#:36811822
Part#: I-62-DS
Ships in 5 Business Days
$ 1,395.00 USD
Free Shipping
$ 1,395.00 USD
Free Shipping
BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
Show More Show Less

BC Racing - Corporate Logo
T#:36981070
Part#: I-128-ER
Ships in 5 Business Days
3% off MSRP $ 1,985.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,935.00 USD
Free Shipping
3% off MSRP
$ 1,985.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,935.00 USD
Free Shipping
The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
Show More Show Less
H&R Premium Performance Coilover Kit - E82/88 128i 135i/is
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:369917
Part#: 39211-11
Ships in 3 Business Days
10% off MSRP $ 1,650.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,485.00 USD
Free Shipping
10% off MSRP
$ 1,650.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,485.00 USD
Free Shipping
128/135i Front Lowering: 1.2-2.0" Rear Lowering: 1.0-2.0" 135is Front Lowering: .25-1.0" Rear Lowering: .20-1.0" H&R Premium Performance Coil Overs have all the features of the Street Performance Coil Overs, with ultra-lightweight aluminum front struts that reduce unsprung weight. Weight is reduced 30-40% over stock struts. Reduced unsprung weight improves suspension articulation, resulting in optimized performance and superb ride comfort. The aluminum struts are black hard anodized for strength and beauty— giving your vehicle a little German style. H&R premium coil overs have the best ride quality, while increasing control and reducing body roll.
Show More Show Less

BC Racing - Corporate Logo
T#:36710093
Part#: I-90E-BR
Ships on Nov 18, 2026
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.
Show More Show Less

Bilstein B12 Pro Suspension Kit
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:13924891
Part#: 46-281784
Ships in 3 Business Days
$ 2,569.00 USD
Free Shipping
$ 2,569.00 USD
Free Shipping
Bilstein's B12 suspension kit is the go-to option for a sporty suspension upgrade. Developed specifically for your vehicle, the B12 is engineered for ease of installation and tailored to the ride dynamics of your suspension. The spring compression height and motion ratio remain the same, just like your original suspension geometry. This means that ground clearance remains the same and nothing grinds or rubs!
Show More Show Less
BC Racing - Corporate Logo
T#:568061
Part#: I-78E-BR
Ships on Nov 18, 2026
$ 1,395.00 USD
Free Shipping
$ 1,395.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:53361585
Part#: I-121-BR-SW
Ships on Nov 18, 2026
New Item
$ 1,765.00 USD
Free Shipping
$ 1,765.00 USD
Free Shipping
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less


BC Racing - Corporate Logo
T#:46719195
Part#: I-141E-BR
Ships on Nov 18, 2026
$ 1,365.00 USD
Free Shipping
$ 1,365.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing - Corporate Logo
T#:46753503
Part#: I-149E-BR
Ships on Nov 18, 2026
$ 1,365.00 USD
Free Shipping
$ 1,365.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing - Corporate Logo
T#:42604923
Part#: I-11-DS-SWIFT
Ships on Nov 18, 2026
$ 1,985.00 USD
Free Shipping
$ 1,985.00 USD
Free Shipping
BMW E82 E88 DS Series Coilover Kit delivers an unparalleled driving experience by incorporating a proprietary digressive piston design that enhances low-speed damping force while maintaining a linear feel at higher velocities. Designed specifically for BMW E82 and E88 models, Turner Motorsport's coilover kit ensures a more planted and confident chassis with increased feedback through the steering wheel, making it ideal for both technical road courses and daily driving.
Show More Show Less

BC Racing - Corporate Logo
T#:4042134
Part#: I-72E-BR
Ships on Nov 18, 2026
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less

Suspension Techniques - Corporate Logo
T#:379419
Part#: 90206
Ships in 4 Business Days
$ 1,089.00 USD
Free Shipping
$ 1,089.00 USD
Free Shipping
Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.Lowering within TüV-tested adjustment range of 0.6"-1.6"F, 0.4"-1.4"R
Show More Show Less
BC Racing - Corporate Logo
T#:568070
Part#: I-66E-BR
Ships on Nov 18, 2026
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less

BC Racing - Corporate Logo
T#:568081
Part#: I-44E-BR
Ships on Nov 18, 2026
$ 1,345.00 USD
Free Shipping
$ 1,345.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions
Show More Show Less
BC Racing - Corporate Logo
T#:36811806
Part#: I-84-DS
Ships in 5 Business Days
$ 1,395.00 USD
Free Shipping
$ 1,395.00 USD
Free Shipping
BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
Show More Show Less

H&R Street Performance Coilovers - BMW G23 M440i
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:3586300
Part#: 28658-4
Ships in 3 Business Days
10% off MSRP $ 1,880.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,692.00 USD
Free Shipping
10% off MSRP
$ 1,880.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,692.00 USD
Free Shipping
G23 2WD Convertible - Street perfomance Coilovers - 1.2" - 1.9*" F Lowering - 1.0" - 1.8" R Lowering H&R has dedicated almost four decades to the suspension industry and it definitely shines through in the end product. Their teams of engineers and designers have consistently produced products obtaining the coveted TUV & ISO certification for safety and quality. 100% German made, the line of H&R coilovers is the original aftermarket suspension, but still one of the best. H&R suspension components are synonymous with quality. Since the inception of H&R in the late 1970s, they have been making some of the highest quality suspension components available. With a need for an improved suspension in the automotive aftermarket, H&R essentially created the modern-day coilover that we are all used to. Not only concentrated on “stance,” H&R considered high quality materials and ride comfort extremely important. Bring some of that German engineering to your vehicle with a set of H&R street performance coilovers. With the adjustability of ride height, the fully threaded, custom valved suspension system will offer high performance with superb ride comfort and handling. Progressive rate springs both front and rear assure that no matter what height you have your vehicle set at, your ride will be great. By lowering the vehicle's center of gravity, less body roll will be experienced during hard cornering with a more balanced vehicle weight.
Show More Show Less

BC Racing - Corporate Logo
T#:36710098
Part#: I-116-BR
Ships in 5 Business Days
$ 1,195.00 USD
Free Shipping
$ 1,195.00 USD
Free Shipping
The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
Show More Show Less
KW Suspension - Corporate Logo
T#:1017097
Part#: 3A7200CR
Ships in 4 Business Days
$ 8,594.00 USD
Free Shipping
$ 8,594.00 USD
Free Shipping
The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day-to-day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Two-Step Rebound Valve with Adjustable KW TVR-A Rebound Stage Damping Technology The rebound stage damping is precisely tuned to the respective vehicle on our in-house drive dynamics test facility, with the setting fixed in the mid-range. Individual customization can be achieved in 16 precise click positions, allowing you to choose between more comfort or more body control. The two-step patented TVR-A technology allows the damper oil to flow through an adjustable, conical low-speed valve during slow piston speeds, while during higher piston speeds the main rebound stage valve opens to handle the flow of large volumes of oil. This provides a major improvement in ride comfort without influencing the high-speed in the safety-relevant zone. Two-Step Compression Stage Valve with Low and High-Speed KW TVCLH-A Adjustment Technology This is the high-end motorsports technology for the most demanding street and track performance customers. Two separate valves and a two-way adjustable compression stage valve allow separate compression damping changes in the low and high-speed range. The adjustments are made via two adjustment dials with click increments that feature 16 settings (with 15 clicks) in the high-speed valve housing and 7 settings (with 6 clicks) in the low-speed housing. During tuning at the KW drive dynamics test facility, the groundbreaking V4 coilover suspension is tuned to a mid-level basic setting for the best road performance with an additional recommended setting for occasional track day use. The 3A Clubsport coilover suspension is tuned to a mid-level factory setting especially for track day use, with an additional recommended setting for the drive to the race track. Starting from the factory setting, the damping can be set firmer or softer for low and high-speed. External Reservoir The use of KW reservoirs provides additional volume for additional oil and additional cooling capacity for extremely high-performance setups. The reservoir is filled with low gas pressure and can be fitted anywhere and accommodates the adjustable compression stage valve to provide the damper with more working space. Additional Features: Uniball Top Mount Trapezoidal Threads Stainless Steel Innox Construction Composite Spring Seats
Show More Show Less
BC Racing - Corporate Logo
T#:36777919
Part#: I-127-BR
Ships in 5 Business Days
4% off MSRP $ 1,245.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,195.00 USD
Free Shipping
4% off MSRP
$ 1,245.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,195.00 USD
Free Shipping
BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BR Series coilover suspension kit features mounting points and brackets that are completely compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment, including simultaneous compression and rebound control, and a 2-inch average ride height drop. All BR Series kits are Dyno tested in order to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are all constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include: Caster/Camber Plates, Camber Plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs typically allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum, just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high-quality STKM13C steel with all brackets welded robotically. Both styles are then powder coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in places possible, unless otherwise limited by the OE design of the vehicle which does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications, and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths, and diameters. Each vehicle, depending on their data from R&D and accounting for the OEM suspension design, will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance.
Show More Show Less


BC Racing - Corporate Logo
T#:46753511
Part#: I-153E-BR
Ships on Nov 18, 2026
$ 1,365.00 USD
Free Shipping
$ 1,365.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing - Corporate Logo
T#:46753520
Part#: I-159E-BR
Ships on Nov 18, 2026
$ 1,365.00 USD
Free Shipping
$ 1,365.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing - Corporate Logo
T#:46753506
Part#: I-151E-BR
Ships on Nov 18, 2026
$ 1,365.00 USD
Free Shipping
$ 1,365.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less

KW Suspension - Corporate Logo
T#:338399
Part#: TMS338399
Back Ordered
Starting at $ 3,209.00 USD
Free Shipping
Starting at $ 3,209.00 USD
Free Shipping
Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

Must have 5 Bolt Upper Strut Mount

KW Clubsport coilovers was developed for F22 M235i Coupe owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-65mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 457 lbs/inch, Rear 685 lbs/inch.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    EDC must be disabled using the included KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC.

    Choose:
    2-way (Rebound/Compression) adjustable shocks
    or
    3-way(Rebound/Low-Speed Compression/High-Speed Compression).

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2014+ F22 BMW 228i M235i
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:36777918
    Part#: I-121-BR
    Ships in 5 Business Days
    4% off MSRP $ 1,245.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,195.00 USD
    Free Shipping
    4% off MSRP
    $ 1,245.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,195.00 USD
    Free Shipping
    The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:4319919
    Part#: I-98E-BR
    Ships on Nov 18, 2026
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BR Series coilover suspension kit features mounting points and brackets that are completely compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment including simultaneous compression and rebound control, and a 2 inch minimum ride height drop. All BR Series kits are Dyno tested in order to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are all constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include: Caster/Camber Plates, Camber plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high quality STKM13C steel with all brackets welded robotically. Both style are then powder coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in in places possible unless otherwise limited by the OE design of the vehicle which does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths and diameters. Each vehicle depending on their data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions Note: there is often a build time of 4-8 weeks associated with Extreme Low coilovers.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:46753523
    Part#: I-95E-BR
    Ships on Nov 18, 2026
    $ 1,365.00 USD
    Free Shipping
    $ 1,365.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:46753517
    Part#: I-155E-BR
    Ships on Nov 18, 2026
    $ 1,365.00 USD
    Free Shipping
    $ 1,365.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:46753510
    Part#: I-154E-BR
    Ships on Nov 18, 2026
    $ 1,365.00 USD
    Free Shipping
    $ 1,365.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
    Show More Show Less

    ECS - Corporate Logo
    T#:48815453
    Part#: 029309ECSKT
    Ships in 1 day
    Sale - Save 9% $ 1,381.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 1,259.77 USD
    Free Shipping
    Sale - Save 9%
    $ 1,381.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 1,259.77 USD
    Free Shipping

    This brand new BMW Coilover line from ECS Tuning was designed with daily drivers in mind! Their focus was to improve on the performance and look of the suspension, without forgoing any comfort. Like many of the top tier coilovers, these coilovers feel as smooth and comfortable as a stock setup, while giving you an aggressive look and vastly improved handling, all at a fraction of the price!

    The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

    Spring Rates: Front is 8kg/mm, Rear is 12kg/mm

    PERFORMANCE FEATURES

    32 levels of rebound damping adjustment Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height PRODUCT DESIGN

    Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity Threaded portions are clear zinc-coated for optimum corrosion protection against rain and salt Coil springs are powder-coated Reflex Silver Metallic finish for durability Red anodized, billet aluminum lower spring seats with locking collars allow for quick, on-the-car, adjustability with the included spanner wrenches Integrated bump stops KIT CONTENTS

    ECS Performance Adjustable Coilover System - E9X (RWD) Front Suspension Installation Hardware: Strut Mount Gasket - 31306772226 (2) Spindle Pinch Bolt - 33326760346 (2) Spindle Pinch Nut - 33326760668 (2) Strut Rod to Cowl External Torx-Head Bolt - 07146954965 (1) Strut Rod to Strut Tower External Torx-Head Bolt - 07146963730 (2) Rear Suspension Installation Hardware: Lower Control Arm Nut - 33306760349 (4) Lower Shock Mount Bolt - 33526764406 (4) Lower Shock Mount - 33526768544 (2) Upper Shock Mount (Upper) - 33506771737 (2) Upper Shock Mount (Lower) - 33506771738 (2) Upper Shock Mount Sealing Grommet - 33506767010 (2)

    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:379569
    Part#: 18220831KT
    Back Ordered
    $ 1,649.00 USD
    Free Shipping
    $ 1,649.00 USD
    Free Shipping
    For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminum uniball top mount for fine-tuning of the camber and caster! ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Lowering within TüV-tested adjustment range of 1.6-3.1"F, 0.8-2.0"R Front and rear axle with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Aluminum adjustable uniball top mounts Scaled camber adjustment Externally adjustable damping 5 year limited warranty
    Show More Show Less
    ECS Performance 2-Way Adjustable Coilover System - E36
    10X Entries Into Our F80 M3 Sweepstakes
    ECS - Corporate Logo
    T#:56507810
    Part#: 057807LA01
    In Stock
    New Item
    Sale - Save 43% $ 1,749.99

    This product was last offered at the strikethrough price on
    08-14-2026

    $ 999.99 USD
    Free Shipping
    Sale - Save 43%
    $ 1,749.99

    This product was last offered at the strikethrough price on
    08-14-2026

    $ 999.99 USD
    Free Shipping

    Take total control of your E36's handling with the ECS Performance 2-Way Adjustable Coilover System. Built specifically for track use, this system bridges the gap between standard off-the-shelf coilovers and full-fledged motorsport suspension. These coilovers feature independent compression and rebound controls supported by external reservoirs; unlocking the precision tuning needed to shave seconds off your lap times.

    Traditional 1-way coilovers force a single adjustment knob to balance both bump and rebound. These 2-way dampers eliminate that trade-off with fully independent compression and rebound controls. Use the 32 levels of compression adjustment to control front weight transfer under heavy braking, maximizing entry grip and allowing you to trail-brake deep into corners without understeer. 22 rebound levels fine-tune chassis recovery on brake release, keeping the front tires loaded through the apex for faster power-on exit speeds.

    To maintain consistent performance during extended periods of performance driving, these dampers feature dedicated external fluid reservoirs that significantly increase total gas volume. During rigorous track use, rapid piston movement generates intense friction and heat, causing standard damper oil to thin out, aerate, and lose its damping force. By increasing overall fluid capacity, the external reservoirs effectively dissipate heat to keep peak oil temperatures down.

    Show More Show Less


    Bilstein B12 Pro-Kit Suspension System - E36 325i, 328i, 323i ...
    10X Entries Into Our F80 M3 Sweepstakes
    For cabriolet models only
    Bilstein - Corporate Logo
    T#:346252
    Part#: 46-180964
    Special Order: No Guaranteed ETA
    $ 1,019.00 USD
    Free Shipping
    $ 1,019.00 USD
    Free Shipping

    Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

    The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

    Bilstein B12 Features: 

    • Precise response and excellent driving performance
    • Springs and shocks road tested and fine-tuned to complement one another
    • Bilstein Monotube/Inverted gas pressure technology
    • TUV certified
    • Made In Germany
    • Average Lowering of 25 to 40mm

    Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

    This item fits the following BMWs:
    1994-1999 E36 BMW 325i, 328i, 323i

    Show More Show Less
    Bilstein - Corporate Logo
    T#:346253
    Part#: 46-181060
    Special Order: No Guaranteed ETA
    $ 967.00 USD
    Free Shipping
    $ 967.00 USD
    Free Shipping

    Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

    The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling. 

    Bilstein B12 Features: 

    • Quick response and precise handling
    • Springs and shocks road tested and fine-tuned to complement one another
    • Bilstein Monotube/Inverted gas pressure technology
    • TUV certified
    • Made In Germany
    • Average Lowering of 30 to 60mm

    Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

    This item fits the following BMWs:
    1992-1999 E36 BMW 325i 328i 323i

    Show More Show Less
    Bilstein B12 Pro-Kit Suspension System - E88 128i Vert
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:346242
    Part#: 46-180520
    Special Order: No Guaranteed ETA
    $ 999.00 USD
    Free Shipping
    $ 999.00 USD
    Free Shipping

    Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

    The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

    Bilstein B12 Features: 

    • Precise response and excellent driving performance
    • Springs and shocks road tested and fine-tuned to complement one another
    • Bilstein Monotube/Inverted gas pressure technology
    • TUV certified
    • Made In Germany
    • Average Lowering of 25 to 40mm

    Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

    This item fits the following BMWs:
    2008-2013 E82 BMW 128i

    Show More Show Less

    B12 Pro-Kit Suspension System - E60 525/530
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:346258
    Part#: 46-181190
    Special Order: No Guaranteed ETA
    $ 1,139.00 USD
    Free Shipping
    $ 1,139.00 USD
    Free Shipping
    The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.
    Show More Show Less

    Bilstein - Corporate Logo
    T#:26204998
    Part#: 47-326170
    Special Order: No Guaranteed ETA
    $ 2,408.99

    This product was last offered at the strikethrough price on
    07-08-2026

    $ 1,820.00 USD
    Free Shipping
    $ 1,820.00 USD
    Free Shipping
    Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO S is a coilover kit built and tuned specifically for everyday street use. Featuring ride height adjustability in an OE quality, direct fit package. Redesigned threaded-bodied dampers allow for extreme lowering of up to 70mm. High quality components ensure longevity through everyday use while providing a sportier look. Improved handling and ride comfort are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nurburgring.
    Show More Show Less
    ECS - Corporate Logo
    T#:58234559
    Part#: 057821LA01
    In Stock
    New Item
    $ 1,799.99 USD
    Free Shipping
    $ 1,799.99 USD
    Free Shipping

    Take total control of your E46's handling with the ECS Performance 2-Way Adjustable Coilover System. Built specifically for track use, this system bridges the gap between standard off-the-shelf coilovers and full-fledged motorsport suspension. These coilovers feature independent compression and rebound controls supported by external reservoirs; unlocking the precision tuning needed to shave seconds off your lap times.

    Traditional 1-way coilovers force a single adjustment knob to balance both bump and rebound. These 2-way dampers eliminate that trade-off with fully independent compression and rebound controls. Use the 32 levels of compression adjustment to control front weight transfer under heavy braking, maximizing entry grip and allowing you to trail-brake deep into corners without understeer. 22 rebound levels fine-tune chassis recovery on brake release, keeping the front tires loaded through the apex for faster power-on exit speeds.

    To maintain consistent performance during extended periods of performance driving, these dampers feature dedicated external fluid reservoirs that significantly increase total gas volume. During rigorous track use, rapid piston movement generates intense friction and heat, causing standard damper oil to thin out, aerate, and lose its damping force. By increasing overall fluid capacity, the external reservoirs effectively dissipate heat to keep peak oil temperatures down.

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:180871
    Part#: 35220100
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - Separate adjustments for compression (14 positions) and rebound (infinite settings), Stiffer springs over stock for less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. Lifetime warranty! This item fits the following BMWs: 2012+ F13 BMW 640i 650i - Coupe ONLY for cars with Adaptive Drive and EDC.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50831266
    Part#: 152200FB
    Back Ordered
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 is the definitive upgrade for the BMW G26 enthusiast who demands a personalized suspension setup.

    KW Suspension - Corporate Logo
    T#:206109
    Part#: 1522000Z
    Back Ordered
    $ 2,684.00 USD
    Free Shipping
    $ 2,684.00 USD
    Free Shipping
    Adjustable Rebound Damping The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including - Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable Front Lowering:1.2" to 2.0" Rear Lowering:1.2" to 2.4" TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. Coilover suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Lifetime warranty!
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11575
    Part#: 10220087
    Back Ordered
    $ 2,464.00 USD
    Free Shipping
    $ 2,464.00 USD
    Free Shipping
    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -Lifetime warranty!
    KW Suspension - Corporate Logo
    T#:361870
    Part#: 15220080
    Back Ordered
    $ 2,834.00 USD
    Free Shipping
    $ 2,834.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i without EDC
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50831413
    Part#: 152200FA
    Back Ordered
    $ 2,694.00 USD
    Free Shipping
    $ 2,694.00 USD
    Free Shipping
    The KW V2 is the premier choice for the BMW 4 Series owner who wants to bridge the gap between street comfort and sporty performance.


    KW Suspension - Corporate Logo
    T#:349058
    Part#: 352200AB
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F31 BMW 328i xDrive - Wagon
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:361415
    Part#: 18020032
    Back Ordered
    $ 2,414.00 USD
    Free Shipping
    $ 2,414.00 USD
    Free Shipping

    Adjustable Rebound Damping, Sport Comfort Springs

    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

    KW street comfort – The most individual sport suspension with maximum comfort

    With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

    • Maximum driving comfort for a perfect performance and more driving pleasure
    • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
    • Comfortable adjustment
    • Spring Rate; Front 286 lbs/inch, Rear 572 lbs/inch
    • Better handling due to less body roll
    • TUV approved lowering range
    • Individually height-adjustable - Front - 15-35mm, Rear - 10-30mm
    • Trapezoid thread for a easy height adjustability
    • High quality damper components for long durability
    • Adjustable rebound damping
    • Complete detailed documentation for easy use


    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2007-2013 E92 BMW 328i 335i 335is - Coupe

    Show More Show Less