Find Parts That Fit Your Vehicle

Home
Suspension
Camber / Caster Kits

BMW Camber / Caster Kits

The camber setting in your alignment is one of the most crucial aspects of your suspension and the overall driving experience. Unfortunately, most BMWs do not have a camber adjustment in the front and a limited adjustment in the rear. This can be frustrating because camber comes into play whenever you make changes to the suspension or when you want more negative camber for more grip and better handling. There are multiple reasons to adjust camber -

• You want more front end grip to reduce understeer and create a more balanced handling scenario,
• You have lowered the car and need to reduce negative camber due to inside tire wear
• You added wider tires or wheels and need extra clearance to bodywork,
• Your car was in an accident or collision and the camber setting is now wrong. Note: there may be other factors to this situation and we recommend finding the root cause rather than a quick-fix.

We offer front fixed or adjustable camber plates or camber/caster plates, rear adjustable camber arms, and rear adjustable camber bushings from KMAC, Vorshlag, and also our own designs to fit your specific needs. In most cases, these adjustable camber kits are a direct replacement for the stock BMW part, enabling a seamless upgrade. Adjustable camber can be dialed-in using ordinary hand tools and most kits have reference marks for consistent and repeatable adjustments. No drilling, slotting, or welding required! Some kits perform specific functions and fit with specific types of suspensions (stock, stock-type, coil-over, etc). Give us a call if you need guidance in selecting the best camber plate option for your particular suspension or situation.

This category contains parts that fit the following chassis:

Sub-Categories

Sort By:

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E39 540/M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389661

Part#: 193616-1J

Special Order: No Guaranteed ETA

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i (for cars with EDC)
1999-2003 E39 BMW M5
1995-2001 E38 BMW 740i 740il 750il (for cars with EDC)

Show More Show Less

Rear Upper Control Arm Set - F8X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5580939

Part#: FLM-F8XWUAK

In Stock

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD

Limited Qty Sale

Add to Wish List

These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.

Show More Show Less

SPL Parts Titanium Series Adjustable Front Lower Racing Control Arms ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:553873

Part#: SPLFLCARE9X

Ships in 1 Business Day

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

These SPL Parts Front Lower Street Control arms replace OEM Part numbers 31122405860 and 31122405859

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

These SPL front lower control arms open up a wide range of adjustment for roll center, camber, and track width adjustment and allow for full articulation with the correct ball joint angle. Instead of using traditional jam nuts, the main arm is slotted to allow the use of pinch bolts and SPL rotating clamps on their exclusive adjuster, making it easier to lock in track width and camber specifications.

*DOES NOT include headlight adjusting rod

SPL Parts Billet Lower Control/Trailing Arms Feature:

Lightweight Aluminum and Titanium construction
Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment
Correct ball joint angle for full articulation
Rotating Clamp design allows for easy access to lock down alignment settings
Low friction 3 piece Teflon lined FK sphericals and Heim joints/rod ends
Multiple size Stainless Steel roll center spacers for precise adjustment

Fits the following BMWs:
2006-2013 E9X BMW RWD Submodels
2008-2013 E82/88 BMW All Submodels

Show More Show Less

AST Suspension Adjustable Top Mount Camber Plates - OEM Damper - BMW ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32980571

Part#: TMA-B20-A2-20F

In Stock at Vendor

$ 1,140.00 USD

Add to Wish List

Qty

$ 1,140.00 USD

Add to Wish List

The latest innovative design from the expert engineers at AST Suspension is a solution for BMW owners seeking additional camber adjustment while retaining the factory struts. AST Suspension’s lowering spring and adjustable lowering spring sets can be combined with the camber-adjustable top mounts, meaning customers who have already equipped their vehicles with those components can now improve camber adjustability without losing the electronic dampers’ OE functionality. These new top mounts provide an additional 0° to -4.2° of camber adjustment, improving on factory adjustments done via the OE arms. AST Suspension opted for solid bushings made from 7075 high-grade aluminum with stainless steel inserts, manufactured in Japan. AST Suspension has employed these bearings in various applications for over 25 years, and they are trusted for their long-lasting anti-wear characteristics that have led to success in endurance racing. As an added benefit, these motorsport-quality bearings are effectively silent, preserving factory NVH. AST Suspension specializes in producing suspension components for vehicles serving regular street use and competition purposes such as race, rally, autocross, and more. The company has continuously evolved since its establishment in 2000 and has always taken pride in its work. By combining in-house design and production with technical know-how, industry experience, and road-and-track testing, AST Suspension consistently produces exceptional suspension components at a competitive price. Features: Adjustment from 0 degrees to -4.2 degrees of camber Retains full functionality of OE dampers Compatible with AST Lowering Springs and Adjustable Lowering Springs

Show More Show Less

TC Kline Racing Camber Caster Plates - E36 E9X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:401266

Part#: TCKE36CAMPLA

Ships in 2 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should. Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it. NOTE: Will not fit with Bilstein Struts/Shocks. Can only be used with Linear style springs. Will not fit OE-Style Progressive / Barrel style springs. Fits the following BMW's 1992-1999 E36 BMW - 318ti 318i/is/ic 323i/is/ic 325i/is 328i/is/ic M3 2006-2013 E9X BMW - 325i/xi 328i/xi 330i/xi 335i/is/ix M3

Show More Show Less

TC Kline Racing Camber Plates - BMW F87 M2 (Non-Comp)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with TC Kline Racing Coilovers Only - Replaces 6-Bolt Front Strut Mounts

T#:401221

Part#: TCKF87CP

Ships in 2 Business Days

$ 518.00 USD

Add to Wish List

Qty

$ 518.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21637213

Part#: PFF5-4001G

Ships in 1 Business Day

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

When you opt to enhance your BMW F80, F82, F83, or F87 with Radius Arm to Chassis Bushings, you unlock a multitude of advantages. These include: Enhanced Handling: Radius Arm to Chassis Bushings elevate your BMW's handling to a higher level, granting exceptional control, especially during demanding maneuvers and sharp corners. This translates to an improved sense of stability on the road. Reduced Vibration and Noise: These bushings excel at reducing vibrations and dampening noise, leading to a quieter and smoother driving experience. Your ride quality becomes more refined, enhancing overall comfort. Improved Steering Response: Bid farewell to unresponsive steering. Radius Arm to Chassis Bushings enhance your BMW's steering response, delivering precise and immediate control, akin to forging a direct connection with the road. Extended Component Lifespan: Opting for high-quality bushings extends the lifespan of various suspension components. They exhibit superior durability compared to stock bushings, which translates to fewer replacements and increased longevity. Enhanced Traction: Whether you're passionate about spirited driving or partake in track activities, these bushings provide superior traction. Your BMW maintains consistent contact with the road surface, allowing you to confidently explore your vehicle's performance limits. OE / OEM Cross Reference Numbers: 31122284531/ 31122284532 / 31122283579 Fits these BMW models: F80 - M3 F82 - M4 F87 - M2

Show More Show Less

SPL Parts Eccentric Toe Lockout - G29 Z4, A90 Supra

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587631

Part#: SPL-EL-G29

Ships in 1 Business Day

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The stock eccentric bolts provided by BMW and Toyota for small toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. SPL Parts Eccentric Lockout kit eliminates the stock eccentric bolts to keep your rear alignment where you set it.

Show More Show Less

Adjustable Rear Camber Bushing Kit - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:375818

Part#: 72185

Ships in 4 Business Days

$ 103.99 USD

Add to Wish List

Qty

$ 103.99 USD

Add to Wish List

Adjustable Rear Camber/Toe Bushings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582353

Part#: 192026G

In Stock

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

MINI Adjustable Rear Tie Bars

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404915

Part#: FMRCAM

Ships in 6 Business Days

Sale - Save 10% $ 560.99

This product was last offered at the strikethrough price on
07-01-2026

$ 504.36 USD

Add to Wish List

Qty

Sale - Save 10%

$ 560.99

This product was last offered at the strikethrough price on
07-01-2026

$ 504.36 USD

Add to Wish List

Forge introduces its Forge Adjustable Rear Tie Bars for various MINI models, developed and tested in the demanding Mini Challenge Race Series environment. Designed for road-going MINIs, including R50-R53, R55-R59, and R60/R61 models, these tie bars offer superior performance and durability.

Tested in the Mini Challenge Race Series for proven reliability
Enhances tire surface contact area for improved traction
Reduces uneven tire wear for extended tire life
Adjustable geometry allows for fine-tuning and faster lap times
Eliminates tramlining feel and improves steering response
Manufactured from high-quality high tensile steel for strength and durability
Corrosion-resistant powder coating ensures longevity in all conditions
Supplied with custom-made dirt ingress covers for added protection
Fitted with Powerflex polyurethane bushes for high performance and long life
Covered by Forge's industry-leading Lifetime warranty

Upgrade your Mini's performance with Forge Adjustable Rear Tie Bars, manufactured in the UK for optimal quality and reliability.

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389647

Part#: 192416-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Project Cars

SELECT YOUR BMW

BMW Camber / Caster Kits

Sub-Categories

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E39 540/M...

Rear Upper Control Arm Set - F8X

SPL Parts Titanium Series Adjustable Front Lower Racing Control Arms ...

AST Suspension Adjustable Top Mount Camber Plates - OEM Damper - BMW ...

TC Kline Racing Camber Caster Plates - E36 E9X

TC Kline Racing Camber Plates - BMW F87 M2 (Non-Comp)

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

SPL Parts Eccentric Toe Lockout - G29 Z4, A90 Supra

Adjustable Rear Camber Bushing Kit - Priced Each

Adjustable Rear Camber/Toe Bushings

MINI Adjustable Rear Tie Bars

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results