Showing 2993 results for ""

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

This kit includes everything to fit an OBDI M50 manifold to an OBDII M52 or S52 engine (1996-1999). It takes the guesswork out of adding the M50 manifold to your engine. The kit includes a CNC machined adapter, with all hardware and gaskets, that allows the freer flowing M50 manifold to be installed while maintaining full function of M52/S52 components including factory PCV cyclone / oil seperator valve. No vacuum leaks, no check engine lights. And the entire kit is completely reversible. Turner Motorsport has dealt with the problems from other kits and this adapter block is by far the best solution.

The base price of this kit does not include the M50 manifold. You can pick up a used manifold from a 1992-1995 E36 325i or a 1995 M3 3.0 liter. You can find them in local junk or scrap yards, online at Craigslist or eBay, or from various forums. If you would rather not deal with the potential pitfalls of a used part, we can offer a new Original BMW manifold to go with the adapter. While expensive, the new manifold is guaranteed to be in perfect condition with no cracks, warping, or foreign objects hidden inside. A new factory BMW manifold can be added to your order by selecting the option above.

With the introduction of the 1996 model year came the OBDII emissions compliant engine. Among the many changes the OBDII engines received was a more restrictive air intake manifold. Where the older M50/S50 engines continued to make power up in the higher RPMs, the newer M52/S52 ran out of breath, limiting high-end horsepower, but boosting low-end torque. Converting the OBDII cars to the 1995 and earlier OBDI manifold is a popular modification to remove this high-rpm restriction.

To best maximize the horsepower gains of this modification, you should be using the M50 manifold with bigger cams, HFM, injectors, and software. We have found this combination of upgrades and software to yield the best results for producing top-end power. Note: using the M50 manifold shifts the power band higher in the RPM range. This is GREAT for track cars but not well-suited for street cars where the OBDII manifold works best to produce torque at lower RPM. Presently, we do not have software tuned for only the M50 manifold without cams or the HFM upgrade. Check our website again for future product releases. We currently offer custom mapped Shark Injectors for these packages:
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/stock OBDII manifold
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/M50 manifold

Optional fuel rail cover. The standard M52/S52 fuel rail cover is too tall for the M50 manifold and does not have the proper brackets for securing it in place over the fuel rail. We can correctly modify the stock M52 fuel rail cover for you to complete the factory appearance.

Download PDF Installation Instructions

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

If you are having boost leaks or if  you remove the intake manifold for any reason, this seal must be replaces to prevent any leaks from forming.  These are sold individually - a total of 6 are on the car.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
M57 3.0L Diesel 

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

BMW N54 3.0L Blow Off Valve For BMW N54 – Q 50mm BOV – 10 PSI Spring Q.10 is an essential upgrade for enhancing the performance and reliability of the BMW N54 engine. Designed to handle higher boost levels, this blow-off valve (BOV) offers superior venting capabilities, ensuring optimal engine performance and longevity.

• High Performance: The 50mm Q BOV is engineered to manage higher boost pressures, providing reliable venting and preventing compressor surge.
• Durable Construction: Crafted from high-quality materials to withstand the stresses of high boost and extreme conditions.
• 10 PSI Spring: Features a 10 PSI spring for precise tuning and improved responsiveness.
• Enhanced Engine Protection: Helps to prevent compressor surge and extends the lifespan of the turbocharger and engine components.
• Easy Installation: Designed for straightforward installation with no extensive modifications required.

Turner Motorsport’s blow-off valve is the perfect choice for BMW enthusiasts seeking improved performance and reliability from their N54 engine setup.

GFB’s DV+ solution couldn’t be simpler - keep what works and replace what doesn’t.

Worldwide Patent and Design Patent Pending

• Retains the factory solenoid coil for seamless integration
• Replaces plastic valve parts with metal for reliability and strength on chipped engines
• Direct-fit replacement with GFB’s TMS benefits
• Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.

The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?), but the weak point however is the valve mechanism itself. So GFB’s DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances.

The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story on the next page.

Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.

GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds.

Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to.

However, there are some problems with these valves. There are typically two types of solenoid-actuated diverter valves found standard on VAG and European cars, both of which have their shortcomings.

Common OE Problem #1
The diaphragm types are commonly known to rupture, especially when boost and temperature are increased as a result of chip tuning.

Common OE Problem #2
The plastic piston-type leaks far more than most people realise (by design, not from wear), and doesn’t always close after a high-boost gear shift.

Additionally, in both cases, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.

With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity - more of a compromise than a solution.

GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.

The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid retains all the benefits of the stock system, and replacing the valve parts with indestructable metal components ensures strength and reliability no matter how much boost you run.

That's not all. Rather than using the solenoid to directly actuate the valve, we’ve introduced a unique “pilot-actuation” system. This means the solenoid controls the air pressure that is used to open and close the piston, so it doesn't matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid’s capability.

This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response.

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**