Showing 2993 results for ""

Boost airflow and unleash a deeper induction sound to rekindle the excitement of driving your BMW E39 525i.

The Luft-Technik Intake System from ECS Tuning is purpose-built for M52TU and M54-powered 525i / 528I models, offering a performance upgrade that overcomes the restrictive factory airbox while maintaining a precise, factory-like fit. ECS Tuning engineered this system around the unique mounting geometry of the E39 chassis, ensuring an effortless bolt-on installation that integrates seamlessly with OEM components.

This performance intake features a high-flow conical air filter housed in a powder-coated aluminum heat shield, designed to seal against the hood and make full use of the factory inlet ducting. By drawing in cooler outside air, the system helps reduce intake temperatures for denser combustion and improved efficiency. A reinforced silicone intake elbow and a precision-engineered MAF housing keep the stock sensor in its proper location while smoothing airflow and reducing turbulence.

The results are immediately noticeable: quicker throttle response, a throatier intake growl, and a cleaner, performance-focused look under the hood. Built with premium materials such as stainless-steel hardware and heat-resistant silicone, ECS Tuning’s Luft-Technik Intake delivers both durability and long-term performance.

For BMW E39 525i / 528I drivers who want OE-level fitment with the benefits of sharper response, enhanced induction noise, and improved airflow, the Luft-Technik Intake by ECS Tuning is a must-have upgrade.

Key features:

21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted air flow for maximum induction noise.
The heat shield is designed to fit the E39 chassis perfectly, utilizing factory mounting locations, and creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains factory MAF
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:

Specifically engineered to work with utilizing that maximum air space and retaining the OEM cold air inlet. Mounts to the factory frame rail, no modification required.

Tailored to the M54B25 found in the 5-series chassis.

Kit Contents:

Heat Shield
Silicone Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
Hi-flow ECS Conical Air Filter
E39 Specific Heat Shield Mount
Hardware for installation
Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.

Installation and support: - Click HERE for Installation Instructions -

BMW E39 M62 4" Silicone Intake Boot is engineered to enhance air flow and performance compared to the factory corrugated rubber boot. Designed by Turner Motorsport, this intake boot features smooth contours and stepped flanges to ensure a seamless transition from the air box to the throttle body. The single-piece construction simplifies installation, offering a straightforward replacement for the stock two-piece design.

• Improved Air Flow: Smooth contours enhance air flow compared to the OE corrugated rubber boot.
• Seamless Transition: Stepped flanges maintain a smooth internal diameter transition.
• Simplified Installation: One-piece design makes installation quick and easy.
• Durable Construction: Made from 5-ply reinforced silicone for enhanced durability and performance.
• Enhanced Resistance: Offers reduced thermal conductivity and superior resistance to ozone and UV degradation.

The stock rubber intake boot often fails due to its accordion section, leading to vacuum leaks, rough idle, and increased fuel consumption. Upgrading to the Turner Motorsport silicone intake boot will eliminate these issues and improve overall performance.

NOTE: This boot is a direct fit for the M62Tu (9/1998+). It will fit the non-TU (pre-9/1998) models with a slight relocation of the MAF sensor.

Unique One-Piece High-Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.

High-Quality Tube:
This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
2011-2013 E82/88 135i N55
2011-2013 E9X 335i N55
2011-2015 E84 X1 35i

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

This intake tube, also known as an inlet, is a common culprit for vacuum leaks. It supplies air to the turbocharger and is typically made of plastic. However, due to frequent exposure to heat, it is prone to developing cracks or tears.

The N20 airbox includes a built-in MAF sensor. If this tube tears, it can lead to a post-MAF leak and cause your engine to run lean. This is a serious issue that requires prompt replacement to avoid potential damage to your engine.

For a reliable and affordable replacement, consider Febi's high-quality air intake tube. It's a durable solution that ensures a long-lasting repair.

Upgrade your BMW with the JB4 Universal Water/Methanol Injection (WMI) Kit, a versatile solution designed to enhance both power and reliability. Engineered to seamlessly integrate with a variety of vehicles, this innovative kit offers a universal solution for enthusiasts seeking optimized performance and engine protection.

• Enhanced Performance: Boost engine power and torque for an exhilarating driving experience.
• Engine Protection: Safeguard your engine from potential damage with precise injection of water and methanol, reducing temperatures and preventing harmful detonation.
• Improved Fuel Economy: Promote more efficient combustion, leading to better fuel economy and reduced emissions.
• Easy Installation: With its universal design, installation is hassle-free, providing a convenient upgrade solution for a wide range of vehicles.
• Advanced Technology: Equipped with adjustable injection rates and integrated safety mechanisms, ensuring optimal performance and reliability.

Upgrade your BMW's performance with the JB4 Universal Water/Methanol Injection Kit and enjoy the perfect blend of power, efficiency, and engine protection.