Packaged by Turner BMW Cooling System Parts & Accessories

Water Pump And Thermostat Kit - BMW N55 F Chassis

Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.

This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.

Signs Your Water Pump and Thermostat May Need Replacement:

• Engine overheating or failing to reach operating temperature
• Water pump running intermittently or erratically
• Cooling fans operating at maximum output
• Engine fault codes, including 20A804

Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

• Mahle-Behr thermostat
• Pierburg water pump
• Genuine BMW coolant
• Mounting hardware required for both the thermostat and water pump

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Behr thermostat with gasket
• Thermostat mounting hardware
• 1 Gal Genuine BMW coolant

This thermostat fits the following BMWs: 
1998-2004 E39 BMW M5 

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump

This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Thermostat
• Water pump
• Coolant

This item fits the following BMW Engines: 
N63,N63N,S63,N62N 

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

• 80 degree Celsius thermostat
• 1 liter of Genuine BMW coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• 16 inch Electric fan 
• Electric fan mounting kit
• Fan controller kit with probe sensor 
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

The water pump is a known weak point across all BMW models, requiring servicing every 60,000 miles. Along with the water pump, it’s wise to replace the thermostat to ensure your cooling system operates at peak efficiency.

This kit features a 90°C (194°F) thermostat from Hamburg Technic, which opens approximately 15°C earlier than the standard factory thermostat. This lower temperature is particularly advantageous for performance-focused applications.

What's Included:

Genuine BMW Mechanical Water Pump Assembly (11537843738) Hamburg Technic Performance Thermostat - 90°C/194°F (11537586885) Genuine BMW Coolant/Antifreeze - Diluted, 1 Gallon (82141467704) Benefits of a Lower Thermostat Temperature:

Enhanced Engine Cooling: Opens sooner to reduce engine temperature more effectively. Improved Performance: Keeps engine components cooler, allowing for better performance in high-stress conditions. Extended Engine Life: Reduces thermal stress on engine parts, promoting longevity. Prevents Overheating: Helps to avoid overheating in demanding driving scenarios. Optimized Fuel Efficiency: Maintains ideal engine temperature for efficient fuel combustion. Elevate your BMW's cooling system and performance with this expertly curated kit from Turner Motorsport.

The water pump is a known weak point across all BMW models, requiring servicing every 60,000 miles. Along with the water pump, it’s wise to replace the thermostat to ensure your cooling system operates at peak efficiency.

This kit features a 90°C (194°F) thermostat from Hamburg Technic, which opens approximately 15°C earlier than the standard factory thermostat. This lower temperature is particularly advantageous for performance-focused applications.

What's Included:

Genuine BMW Mechanical Water Pump Assembly (11517846361) Hamburg Technic Performance Thermostat - 90°C/194°F (11537586885) Genuine BMW Coolant/Antifreeze - Diluted, 1 Gallon (82141467704) Benefits of a Lower Thermostat Temperature:

Enhanced Engine Cooling: Opens sooner to reduce engine temperature more effectively. Improved Performance: Keeps engine components cooler, allowing for better performance in high-stress conditions. Extended Engine Life: Reduces thermal stress on engine parts, promoting longevity. Prevents Overheating: Helps to avoid overheating in demanding driving scenarios. Optimized Fuel Efficiency: Maintains ideal engine temperature for efficient fuel combustion. Elevate your BMW's cooling system and performance with this expertly curated kit from Turner Motorsport.

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Ultimate kit is the top tier option, including the essential conversion components, the upgraded aluminum thermostat housing, and a brand new accessory belt.

This kit is best for someone who has not performed recent cooling system maintenance or who wants to replace everything at once for increased reliability and longevity.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut
• ECS  Aluminum Water Pump Pulley - Black
• Accessory Belt

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**