Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Lemforder - Corporate Logo
T#:377496
Part#: 31121132354
Back Ordered
$ 136.99

This product was last offered at the strikethrough price on
05-07-2026

$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Meyle HD Front Control Arm Refresh Kit - E36 M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:372488
Part#: 311222284612KT
Back Ordered
Sale - Save 6% $ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping
Sale - Save 6%
$ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping
This kit is for optimal cost savings when replacing front control arms on your S52-powered E36 M3. Includes E36 non-M front control arms and offset control arm bushings for close to factory suspension geometry on 96-99 E36 M3, and correct geometry for 95
Show More Show Less
Complete Front & Rear Suspension Rebuild Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677552
Part#: 31111137888KT
Back Ordered
$ 601.99 USD
$ 601.99 USD
No more clunks, squeaks, or wandering from the front or tail end of your E30. Address problems all in one service - don't replace another component every few weeks, make it better than new! Level 3 includes: Front: Lemforder Front lower control arms Solid rubber E36 M3 front control arm bushings for improved handling and steering feel Lemforder Front sway bar end links Sachs Front strut mounts Lemforder Inner and outer tie rod assemblies All required retaining hardware Rear: Rear trailing arm bushings Rear stabilizer links Rear shock mounts - upgraded units from the E46 M3 ECS rear shock mount reinforcement plates for improved mount life and protection from shock mount deformation Rear shock mount hardware and gasket Rear subframe mounts Differential bushing
Show More Show Less

Packaged by Turner - Corporate Logo
T#:583058
Part#: T33329061945KT3
Back Ordered
Sale - Save 6% $ 300.99

This product was last offered at the strikethrough price on
05-03-2026

$ 282.29 USD
Free Shipping
Sale - Save 6%
$ 300.99

This product was last offered at the strikethrough price on
05-03-2026

$ 282.29 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Sway Bar End Links
Reinforcement Plates
Shock Mounts & Gaskets
Differential Mount Bushing
Trailing Arm Bushings
Subframe Bushings

Show More Show Less

Febi Front Straight Control Arm - Left - E39
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363766
Part#: 31121141961
Ships on Jan 22, 2027
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Referred to as a wishbone
Powerflex Black Series - Corporate Logo
T#:376452
Part#: PFF5-510BX2
Ships in 1 Business Day
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1998 - 2004 E39 Touring 525i 528i 540i
1996 - 2004 E39 Sedan 525i 528i 530i 540i 
2000 - 2004 E52 Z8 Roadster

Show More Show Less

Powerflex - Corporate Logo
T#:585851
Part#: PFF5-2001X2
Ships in 1 Business Day
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping
Secure vintage front axle stability. These high-performance polyurethane inner bushings eliminate control arm deflection, ensuring track-ready geometry retention and absolute steering communication under extreme loading.
Show More Show Less
Febi Front Straight Control Arm - Right - E39
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363767
Part#: 31121141962
Ships on Jan 22, 2027
$ 74.99 USD
Free Shipping on orders $49 and up
Referred to as a wishbone

Meyle HD Front Suspension Refresh Kit - E82 E9x
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:4934903
Part#: 3160500101/HD
In Stock
$ 403.99 USD
Free Shipping
$ 403.99 USD
Free Shipping
Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. No risk of leakage: MEYLE-HD full-rubber bushing with, optimized rubber shape for a significantly longer lifetime. Compared to OE, MEYLE-HD is, technically improved with reinforced inner parts, using, higher quality materials or optimized design solution with a 4-year warranty on all MEYLE-HD parts., Engineered and quality approved in Germany. Kit includes: Left and right upper control arms with HD bushings Left and right lower control arms with HD ball joints Left and right sway bar end links with HD ball joints Includes all mounting hardware Comes with new HD suspension components for OE part #: 31124036269 31124036270 31126763699 31126763700 31126763703 31126763704 31126763707 31126763708 31126769797 31126769798 31126769801 31126769802 31126770849 31126770850
Show More Show Less

Verkline - Corporate Logo
T#:22525955
Part#: WAS-411
Back Ordered
$ 999.00 USD
Free Shipping on orders $49 and up
Verkline proudly presents their Front Adjustable Camber Arm, a product that has undergone a thorough development and testing program. These state-of-the-art components have followed a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with this high-performance camber arm. Key Advantages: Effortless Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings using a turnbuckle jackscrew, enabling precise alignment adjustments. Roll Center Adjustability: These camber arms offer roll center adjustability with spacers, providing greater control over the vehicle's handling dynamics. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these camber arms maintain unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings and Uniballs: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings and uniballs for convenience. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Robust, Adjustable Xenon Sensor Mounting: Designed for versatility and durability, offering compatibility with xenon sensors. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle, Subframe, and Xenon Sensor Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (camber arms) Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts High-quality motorsport spherical bearings and uniballs Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Set of pin spacers for roll center adjustment Adjustable xenon sensor mounting Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Camber Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. To optimize roll center, it's recommended to add spacers on the front toe link, which can be achieved using Verkline's bump steer adjustable tie rod ends. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less
Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (Sedan w/...
10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC (Up to 12/2001)
Packaged by Turner - Corporate Logo
T#:583019
Part#: T33326767748KT
Ships in 4 Business Days
Sale - Save 4% $ 676.99

This product was last offered at the strikethrough price on
10-01-2026

$ 652.72 USD
Free Shipping
Sale - Save 4%
$ 676.99

This product was last offered at the strikethrough price on
10-01-2026

$ 652.72 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Control Arm Bushings
Rear Ball Joints
Rear Strut Mount
New Hardware

Show More Show Less
Quick Steer/Roll Center Correction Race Kit - E36 M3 S50
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:589331
Part#: 022961TMS09KT4
In Stock
$ 902.99 USD
Free Shipping
$ 902.99 USD
Free Shipping
Correct your suspension geometry, and increase your steering response and handling characteristics!
Show More Show Less


Packaged by Turner - Corporate Logo
T#:582933
Part#: T31122228461KT
Back Ordered
$ 854.99 USD
Free Shipping
$ 854.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 3 kit replaces:

Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links
Strut Tower Reinforcement Plate
Strut Mount & Gasket

Show More Show Less
Powerflex - Corporate Logo
T#:33879986
Part#: PFF5501X2
Ships in 1 Business Day
$ 95.99 USD
Free Shipping on orders $49 and up
$ 95.99 USD
Free Shipping on orders $49 and up
The Powerflex Street Front Lower Tie Bar to Chassis Bushing for BMW E39 540 and M5 (1996-2004) is a performance-oriented upgrade designed to replace the factory rubber bushings with more durable polyurethane. Part of Powerflex's Street series, these bushings offer an excellent blend of enhanced performance and daily driving comfort. Product Features: Application: Fits BMW E39 540i and M5 models from 1996 to 2004. Material: High-grade polyurethane that provides improved stiffness and durability over OEM rubber bushings, resisting wear and deformation. Enhanced Performance: Reduces unwanted flex in the front lower tie bar, resulting in better alignment stability, more precise handling, and improved steering feedback. Comfort-Oriented Design: Street-focused formulation offers performance enhancements without compromising ride quality, making it ideal for daily driving and spirited weekend drives. Longevity: Resistant to road contaminants like oil, dirt, and heat, ensuring a longer lifespan compared to stock bushings. Direct Replacement: Easy installation with no need for modifications, designed as a direct replacement for OEM bushings. These bushings are perfect for BMW enthusiasts looking to improve handling, steering precision, and suspension performance while maintaining a comfortable ride for everyday use.
Show More Show Less
Powerflex - Corporate Logo
T#:4894544
Part#: PFF5-6201
Ships in 1 Business Day
$ 242.99 USD
Free Shipping on orders $49 and up
The factory-installed rubber control arm bushings often result in a disconnected and imprecise sensation in the front suspension, particularly as they wear out, causing excessive deflection. This, in turn, leads to imprecise steering, vibrations, and subpar handling, resulting in a somewhat unstable driving experience. In contrast, these urethane bushings offer superior stiffness compared to the stock rubber ones, minimizing deflection. This contributes to maintaining consistent alignment and results in a more secure and confidence-boosting feel while driving. Furthermore, the added benefit of a lifetime warranty means you're unlikely to incur any future expenses for replacing these bushings. OE / OEM Cross Reference Numbers: 31122284976
Show More Show Less

Complete Front & Rear Suspension Rebuild Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5498501
Part#: E30SUSRF3KT
Back Ordered
Sale - Save 9% $ 768.98

This product was last offered at the strikethrough price on
05-03-2026

$ 702.03 USD
Sale - Save 9%
$ 768.98

This product was last offered at the strikethrough price on
05-03-2026

$ 702.03 USD
No more clunks, squeaks, or wandering from the front or tail end of your E30. Complete suspension refresh - front and rear. Select upgraded OE and aftermarket components will make it better than new! Address problems all in one service - don't replace ano
Show More Show Less

Fall Line - Corporate Logo
T#:5580971
Part#: F8X-1BLCASB
Back Ordered
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less
URO Refresh Suspension Kit - BMW E38 740i 740iL
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:37757272
Part#: E3820PCKIT
Back Ordered
$ 650.99 USD
$ 650.99 USD

URO Refresh Suspension Kit - BMW E38 740i 740iL

URO Refresh Suspension Kit - BMW E38 740i 740iL is the perfect solution to restore precise handling and ride comfort. Over time, worn suspension components can lead to clunks, poor stability, and excessive tire wear. This high-quality suspension kit eliminates mushy handling while maintaining factory geometry for optimal alignment and tire longevity. Featuring durable alloy metal control arms, OE-durometer elastomer bushings, and protective boots for ball joints, this kit ensures smooth operation and long-lasting performance. Designed for a direct fit, it is backed by a 24 Month Unlimited Mileage Warranty for reliability and peace of mind.

  • Designed for BMW E38 740i and 740iL models to restore suspension performance
  • Eliminates clunks, enhances stability, and improves braking and acceleration control
  • Factory-matched geometry ensures proper wheel alignment and optimal tire wear
  • High-strength alloy metal control arms provide long-term durability
  • OE-durometer elastomer bushings offer a smooth, factory-like driving experience
  • Heat and ozone-resistant protective boots extend ball joint lifespan (where applicable)
  • Guaranteed fitment with a 24 Month Unlimited Mileage Warranty
Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - Z3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583048
Part#: T33329061945KT2
Back Ordered
Sale - Save 11% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 249.68 USD
Free Shipping
Sale - Save 11%
$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 249.68 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Reinforcement Plates
Rear Shock Mounts & Gaskets
Trailing Arm Bushings
Sway Bar End Links
Hardware

Show More Show Less
Powerflex Black Series - Corporate Logo
T#:376528
Part#: PFF5-620BX2
Back Ordered
$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 


 

Show More Show Less

Rein Control Arm - Straight Arm - E39
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592212
Part#: 31122341219
Back Ordered
$ 107.99 USD
Free Shipping
$ 107.99 USD
Free Shipping
Complete control arm with bushings and ball joint

Front Ball Joint - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373232
Part#: 31126756696
Back Ordered
$ 24.36 USD
Free Shipping on orders $49 and up
Includes securing nut
Packaged by Turner - Corporate Logo
T#:338063
Part#: 31129064875
Back Ordered
Starting at $ 208.99 USD
Free Shipping
Starting at $ 208.99 USD
Free Shipping
Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3s.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Show More Show Less
Lemforder - Corporate Logo
T#:57086658
Part#: 31108866774
Back Ordered
New Item
$ 375.99

This product was last offered at the strikethrough price on
10-01-2026

$ 348.99 USD
Free Shipping on orders $49 and up
$ 348.99 USD
Free Shipping on orders $49 and up


Sidem M3/1M Front Control Arm Upgrade Kit w/ Installation Hardware - ...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
Sidem - Corporate Logo
T#:53396929
Part#: 3110228357S2KT
In Stock
New Item
$ 426.99

This product was last offered at the strikethrough price on
05-02-2026

$ 417.99 USD
Free Shipping on orders $49 and up
$ 417.99 USD
Free Shipping on orders $49 and up
Elevate your BMW's handling dynamics without sacrificing the refined ride quality you enjoy every day. This upgrade kit utilizes the front control arms originally engineered for the E90 M3 and E82 1M, providing a sophisticated enhancement to your suspension geometry and overall steering precision. While many aftermarket performance options rely on harsh polyurethane or noisy heim-joint bushings that trade comfort for track-focused rigidity, these M3 components offer the ideal middle ground for a spirited daily driver. Unlike the factory Non-M control arms that utilize fluid-filled bushings prone to cracking and leaking over time, these high-performance replacements feature solid rubber bushings. This design significantly reduces control arm deflection and sharpens front-end feedback, ensuring your vehicle feels more planted and responsive during cornering. Sidem has refined this setup even further by reinforcing key areas of the original factory design, resulting in a more durable and reliable component that stands up to the rigors of the road while maintaining a smooth, factory-plus feel.
Show More Show Less
Front Tension Strut - Right
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:54995073
Part#: 31126855742
In Stock
New Item
$ 85.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:13492
Part#: 33326760668
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
GENUINE BMW SELF-LOCKING COLLAR NUT:339500

Genuine BMW - Corporate Logo
T#:60429
Part#: 33326792533
Ships in 1-2 days
8% off MSRP $ 111.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD
Free Shipping
8% off MSRP
$ 111.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD
Free Shipping


Genuine BMW Track Strut With Rubber Mount -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36


IRP - Individual Racing Parts - Corporate Logo
T#:26871572
Part#: IRPACNA-FXMS
Special Order: No Guaranteed ETA
$ 418.99 USD
Free Shipping on orders $49 and up
IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!
Show More Show Less
Genuine BMW - Corporate Logo
T#:13481
Part#: 33321090693
In Stock
8% off MSRP $ 11.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 11.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Bolt With Washer - M12X1,5X88-10.9
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E36,E46,E83 X3,E85 Z4,E86 Z4


Front Tension Strut - Left
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:54995076
Part#: 31126855741
In Stock
New Item
Sale - Save 10% $ 85.99

This product was last offered at the strikethrough price on
10-08-2026

$ 77.39 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 85.99

This product was last offered at the strikethrough price on
10-08-2026

$ 77.39 USD
Free Shipping on orders $49 and up
URO Rear Control Arm Bushing - E36, E46, E83, Z4
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592410
Part#: 33321092247
In Stock
$ 9.16 USD
Free Shipping on orders $49 and up
Upper control arm to subframe bushing

Enthusiast Bundles - Corporate Logo
T#:25075801
Part#: 000189LA01EBKT
In Stock
Sale - Save 36% $ 1,590.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,019.70 USD
Sale - Save 36%
$ 1,590.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,019.70 USD

Upgrade your E36's suspension with the ECS Tuning Performance Coilover System and get a FREE upgraded Monoball FCAB! This sport-tuned system offers adjustable height, damping, and body settings for a customized driving experience. Crafted with high-quality materials, it replaces worn suspensions, providing substantial performance benefits and achieving that perfect ride height.

  • Spring Rates: Front 12kg/mm, Rear 10kg/mm
  • Performance Features:
    • 32 levels of rebound damping adjustment
    • Monotube shocks/struts with progressive rate coil springs for road-sticking grip
    • Lowered ride height improves handling performance
  • Product Design:
    • Durable gloss black powder coat on strut and shock bodies
    • Clear zinc-coated threaded portions for corrosion protection
    • Reflex Silver Metallic finish on powder-coated coil springs
    • Red anodized billet aluminum lower spring seats with locking collars
    • Integrated bump stops

Revitalize your E30/E36 with the FCAB and pre-installed monoball upgrade. This front control arm bushing replacement offers precise, predictable handling without the harshness of solid bushings. Greaseable and serviceable, it enhances performance without sacrificing daily driving comfort.

  • Stock vs. Upgrade:
    • Stock rubber bushings designed for comfort, not optimal performance
    • Poly and delrin bushings compromise handling and wear prematurely
  • Turner Front Control Arm Spherical Bearings:
    • Greaseable spherical bearing for improved precision and durability
    • 6061-T6 anodized housing with needle grease zerk for easy maintenance
    • Precision CNC machined Delrin arm adapter for a tight fit
  • Performance Benefits:
    • Instant, crisp steering and braking response
    • Easy maintenance with long-lasting performance
    • Improved road feel without undesirable NVH

Ensure optimal performance with Turner's Front Control Arm Spherical Bearings – a must-have for track enthusiasts and a great upgrade for spirited driving on the streets.

Show More Show Less

Lemforder - Corporate Logo
T#:399353
Part#: 33306786991
In Stock
Sale - Save 73% $ 17.33

This product was last offered at the strikethrough price on
05-03-2026

$ 4.73 USD
Free Shipping on orders $49 and up
Sale - Save 73%
$ 17.33

This product was last offered at the strikethrough price on
05-03-2026

$ 4.73 USD
Free Shipping on orders $49 and up

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
F25 X3,F26 X4

Show More Show Less
Genuine BMW - Corporate Logo
T#:7695
Part#: 31111137888
In Stock
7% off MSRP $ 9.97

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.26 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 9.97

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.26 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Bolt - M10X40
This item fits the following BMW Chassis:
E30 M3,E36 M3,E30,E36

Genuine BMW - Corporate Logo
T#:37183618
Part#: 31126854727HWKT
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up

When replacing your control arms, it's essential to pair them with fresh hardware to ensure a secure and reliable fit. This kit provides all the necessary hardware for the lower control arms on your vehicle, offering peace of mind and optimal performance.

Kit Contents:

(2) Combination Nuts – Part #33306787062 (2) Hex Screws with Collar – Part #31106797237 (2) Self-Locking Nuts – Part #33326760668

Show More Show Less


Rod End Boot (14-18mm) - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:599632
Part#: RERS3
In Stock
Sale - Save 30% $ 19.99

This product was last offered at the strikethrough price on
07-14-2026

$ 13.99 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 19.99

This product was last offered at the strikethrough price on
07-14-2026

$ 13.99 USD
Free Shipping on orders $49 and up
Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.
Show More Show Less
Powerflex - Corporate Logo
T#:26238497
Part#: PFR5-1104X2
In Stock
$ 121.99 USD
Free Shipping on orders $49 and up

Powerflex Polyurethane Rear Trailing Arm Bushings

Ensure precise handling and stability for your Mini with Powerflex Polyurethane Rear Trailing Arm Bushings. These bushings play a crucial role in maintaining rear suspension triangulation, preventing deflection that can lead to suspension geometry changes and uneven tire wear.

Benefits:

  • Firmer than OEM bushings, reducing deflection
  • Improves handling over bumps and during cornering
  • Extends tire wear with proper alignment
  • Manufactured to exact-fit standards for premium performance
  • Ideal for street-driven vehicles and occasional autocross or track use

Powerflex, Europe's top-selling suspension bushing manufacturer, offers durability and performance with their polyurethane bushings. For ease of installation, use Powerflex Copper Grease PCG1, and enjoy a lifetime warranty on all products.

Show More Show Less
Genuine BMW - Corporate Logo
T#:54002
Part#: 31106771194
Ships in 1-2 days
Sale - Save 33% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.93 USD
Free Shipping on orders $49 and up
Sale - Save 33%
$ 51.99

This product was last offered at the strikethrough price on
05-02-2026

$ 34.93 USD
Free Shipping on orders $49 and up


Genuine BMW Rubber Bushing For A-Arm
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6


Lemforder - Corporate Logo
T#:2741
Part#: 33326770824
Ships in 1 Business Day
$ 18.99 USD
Free Shipping on orders $49 and up

This is the stock replacement rear lower control arm inner bushing, also known as the camber arm or lower wishbone. (sold individually).

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Lemforder - Corporate Logo
T#:360247
Part#: 31102283579
In Stock
$ 39.43

This product was last offered at the strikethrough price on
05-29-2026

$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Genuine BMW - Corporate Logo
T#:59971
Part#: 33306793891
In Stock
6% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.79 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.79 USD
Free Shipping on orders $49 and up


Genuine BMW Securing Bolt - M12X1,5X74-10.9
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F01,F02,F06,F10,F12,F13,F22,F30,F31,F32,F33,F34,F36

Show More Show Less

Bremmen Parts - Corporate Logo
T#:640138
Part#: 33321092247
Ships on Jan 11, 2027
Sale - Save 19% $ 7.99

This product was last offered at the strikethrough price on
06-25-2026

$ 6.49 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 7.99

This product was last offered at the strikethrough price on
06-25-2026

$ 6.49 USD
Free Shipping on orders $49 and up
This is the replacement rear upper control arm inner bushing. (sold individually) Bushings tend to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.
Show More Show Less
Genuine BMW - Corporate Logo
T#:182672
Part#: 31122343359
In Stock
5% off MSRP $ 259.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 245.99 USD
Limited Qty Sale
Free Shipping
5% off MSRP
$ 259.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 245.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Repair Kit, Wishbone, Left - Value Line
This item fits the following BMW Chassis:
E46


Genuine BMW - Corporate Logo
T#:600592
Part#: 31106898072
Ships in 1-2 days
8% off MSRP $ 309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 283.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 283.99 USD
Free Shipping on orders $49 and up

Ball Joint Snap Ring - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363178
Part#: 33321091687
In Stock
$ 1.09 USD
Free Shipping on orders $49 and up
One required per ball joint
Front Control Arm - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:637204
Part#: 31126854728
Ships in 1 Business Day
$ 65.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:7928
Part#: 33171090824
In Stock
Sale - Save 30% $ 15.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.11 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 15.88

This product was last offered at the strikethrough price on
05-02-2026

$ 11.11 USD
Free Shipping on orders $49 and up
For use in the rear suspension M12x1.5x80mm Grade 10.9