Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
Turner Motorsport - Corporate Logo
T#:338951
Part#: JRDRP
Back Ordered
Starting at $ 39.99 USD
Free Shipping on orders $49 and up
Starting at $ 39.99 USD
Free Shipping on orders $49 and up
The rear mounts in BMW 3 series fail, no matter what year from 1983 to present, that is a weak point of the suspension. Here's the solution. The 3 Series "Repair Shop" Rear Shock Mounts carry a lifetime warranty and will last as long as you own your car. Expect the same comfortable ride you have with factory mounts. These are an inexpensive alternative to expensive factory mounts.

Make this complete by adding the mount gasket and nuts (add the option below).
Show More Show Less
Packaged by Turner - Corporate Logo
T#:11954
Part#: TMS11954
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible
Show More Show Less

Meyle Heavy Duty Rear Subframe Bushing - E39 525i 528i 540i Touring M...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:378583
Part#: 33311094036
Ships in 3 Business Days
$ 85.80

This product was last offered at the strikethrough price on
08-26-2026

$ 79.94 USD
Free Shipping on orders $49 and up
$ 79.94 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel.  Meyle HD bushings are the perfect option to improve your suspension.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
E39 BMW
525i 528i 540i Touring Models Only

Show More Show Less

Packaged by Turner - Corporate Logo
T#:339943
Part#: E46-MY-DIFF
In Stock
$ 78.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 56.99 USD
Free Shipping on orders $49 and up
Starting at $ 56.99 USD
Free Shipping on orders $49 and up
These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster
Show More Show Less
Meyle Heavy Duty Rear Differential Mount - E46, E83 X3, E85 Z4 ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:186967
Part#: 33176751808MY
In Stock
$ 53.99

This product was last offered at the strikethrough price on
05-07-2026

$ 31.49 USD
Free Shipping on orders $49 and up
$ 31.49 USD
Free Shipping on orders $49 and up

This is the rear rubber-isolated differential mount. The diff mounts take the bulk of the twisting and binding as power is transmitted through the differential. We use a Meyle HD rubber bushing for the rear mount as it's stronger than the factory part. (33176751808). We also recommend replacing the front differential mount 33171093175MY at the same time.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E83 BMW X3 2.5i X3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Meyle Heavy Duty Rear Subframe Bushing - E53 X5
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:362252
Part#: 33316770454
Ships on Sep 22, 2026
$ 40.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to upgrade your suspension.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
E53 BMW X5 All submodels

Show More Show Less
Turner Motorsport - Corporate Logo
T#:53326250
Part#: 056755LAKT
In Stock
New Item
Sale - Save 13% $ 104.98

This product was last offered at the strikethrough price on
05-07-2026

$ 90.88 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 104.98

This product was last offered at the strikethrough price on
05-07-2026

$ 90.88 USD
Free Shipping on orders $49 and up

Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.

Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.

Features & Benefits:

Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:

Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:

Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less

Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 3 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Turner Motorsport - Corporate Logo
T#:1457
Part#: TSU3080D30
In Stock
Sale - Save 10% $ 82.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.69 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 82.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.69 USD
Free Shipping on orders $49 and up

These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

Show More Show Less
Meyle Heavy Duty Front Control Arm Bushing - E53 E38 E39
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:373709
Part#: 31126769715
In Stock
$ 49.99

This product was last offered at the strikethrough price on
05-07-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 49.99

This product was last offered at the strikethrough price on
05-07-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel.  Meyle HD bushings are the perfect option to improve your suspension.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
E53 BMW X5
E38 BMW 740i/il 750il
E39 BMW 540i

Show More Show Less
Meyle HD Bushing for Trailing Arm (Trailing Arm to Body Mount) - E36 ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:596041
Part#: 33326770786
Ships in 3 Business Days
$ 29.99

This product was last offered at the strikethrough price on
05-07-2026

$ 26.99 USD
Free Shipping on orders $49 and up
$ 26.99 USD
Free Shipping on orders $49 and up
Bushings naturally degrade with time, often leading to splitting or detachment from the inner sleeve. This deterioration results in excessive play and imprecise control. Meyle HD bushings emerge as the ideal solution to enhance your suspension system. Hailing from Germany and with a rich history dating back to 1958, Meyle is a trusted brand. Their entire product range boasts TUV approval and complies with or surpasses ISO standards. The heavy-duty components from Meyle are expertly engineered to deliver extended lifespans compared to alternative aftermarket and original equipment (OE) parts. Moreover, each component comes backed by a generous 4-year warranty. Turner Motorsport has been a prominent source of high-performance BMW components and accessories since 1993. We are proud to serve as the primary supplier for countless enthusiasts worldwide. With over two decades of experience in parts, service, and motorsport, we exclusively offer top-notch performance and replacement components. Our selection comprises components that we not only recommend but also personally use on our own vehicles. We also provide Genuine BMW parts and OEM products for replacement. Rest assured that the parts we offer are those you can rely on for stellar performance. Fits the following BMWs: 1992-1999 E36 BMW All Submodels 2000-2006 E46 BMW Non-M 2003-2010 E83 BMW X3
Show More Show Less


Upper Front Control Arm Bushing - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379701
Part#: 31103412781
Ships in 4 Business Days
Sale - Save 5% $ 31.99

This product was last offered at the strikethrough price on
08-31-2026

$ 30.39 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 31.99

This product was last offered at the strikethrough price on
08-31-2026

$ 30.39 USD
Free Shipping on orders $49 and up
For the front upper control arms
Tension Strut Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:594620
Part#: 31106778015
Ships in 2 Business Days
$ 37.99

This product was last offered at the strikethrough price on
07-23-2026

$ 25.42 USD
Free Shipping on orders $49 and up
$ 25.42 USD
Free Shipping on orders $49 and up
This bushing is used on the front tension struts. If you notice clunking or popping noises, chances are this bushing is bad.
Rein Rear Subframe Bushing - E39
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:399382
Part#: 33311091422
Ships in 4 Business Days
Sale - Save 5% $ 45.99

This product was last offered at the strikethrough price on
08-31-2026

$ 43.69 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 45.99

This product was last offered at the strikethrough price on
08-31-2026

$ 43.69 USD
Free Shipping on orders $49 and up
Used on all four corners of rear subframe.

Subframe Mount Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:403988
Part#: 33311128670
Ships on Sep 22, 2026
$ 49.09

This product was last offered at the strikethrough price on
05-11-2026

$ 25.66 USD
Free Shipping on orders $49 and up
$ 25.66 USD
Free Shipping on orders $49 and up

Genuine MINI - Corporate Logo
T#:414735
Part#: 31126757551
Ships in 3 Business Days
13% off MSRP $ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
Rear Shock Mount
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:594627
Part#: 37121129867
Ships on Sep 22, 2026
$ 41.99 USD
Free Shipping on orders $49 and up
Recommended to be replaced with shock replacement, or as failure is indicated.

Genuine MINI - Corporate Logo
T#:55350
Part#: 31356778827
In Stock
Sale - Save 8% $ 31.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Sale - Save 8%
$ 31.60

This product was last offered at the strikethrough price on
08-26-2026

$ 28.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT
Cup Kit/Coilover Installation Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644279
Part#: 31306763966-KT
Ships in 4 Business Days
$ 518.74

This product was last offered at the strikethrough price on
08-28-2026

$ 515.18 USD
Free Shipping on orders $49 and up
$ 515.18 USD
Free Shipping on orders $49 and up
If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

Genuine MINI - Corporate Logo
T#:22937
Part#: 33526754123
In Stock
Sale - Save 7% $ 94.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.87 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 94.99

This product was last offered at the strikethrough price on
08-26-2026

$ 87.87 USD
Free Shipping on orders $49 and up
Genuine MINI LEFT GUIDE SUPPORT

Meyle Control Arm Bushing Set - E88 E82 E9X E84 Z4
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:403987
Part#: 31120393540
In Stock at Vendor
$ 79.99

This product was last offered at the strikethrough price on
05-07-2026

$ 71.99 USD
Free Shipping on orders $49 and up
$ 71.99 USD
Free Shipping on orders $49 and up

Meyle is a Turner trusted aftermarket replacement brand. There is nothing more disheartening than driving a vehicle that needs new bushings. Reinvigorate your driving feel today by replacing your bushings!

If you're looking for a more track friendly setup and are not interested in pressing in your own bushings, check out our Turner e82 e88 e9x e84 z4 Thrust arm monoball upgrades! 

However, if you're looking for a caster adjustable bushing, SPL Parts makes caster adjustable bushings

Show More Show Less
Meyle Heavy Duty Rear Subframe Front Right Mount - E46 non-M ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:348922
Part#: 33316770784
In Stock
$ 45.99

This product was last offered at the strikethrough price on
06-16-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to upgrade your suspension.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
E46 BMW
Non-M
E83 BMW Non-M

Show More Show Less
E46 non-M OEM/HD Rear Subframe Mount Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340768
Part#: 33316770781KT
In Stock
Sale - Save 48% $ 156.99

This product was last offered at the strikethrough price on
04-16-2026

$ 81.44 USD
Free Shipping on orders $49 and up
Sale - Save 48%
$ 156.99

This product was last offered at the strikethrough price on
04-16-2026

$ 81.44 USD
Free Shipping on orders $49 and up
The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. This kit comprises OEM Lemforder and Meyle HD rubber subframe mounts. Solid aluminum mounts are also available with very little increase in NVH.
Show More Show Less


Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 8 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Meyle Heavy Duty Rear Subframe Front Left Mount - E46 non-M
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:348921
Part#: 33316770783
In Stock
$ 48.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel.  Meyle HD bushings are the perfect option to improve your suspension.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
E46 BMW
 Non-M
E83 BMW Non-M

Show More Show Less
Turner Motorsport Thrust Arm Monoball Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:5746398
Part#: 006309LA01-MA
Ships in 7 Business Days
Sale - Save 5% $ 1,059.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,006.99 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 1,059.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,006.99 USD
Free Shipping on orders $49 and up
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.
Show More Show Less

Tension strut ball joint kit
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:23284050
Part#: D280-0019
Back Ordered
11% off MSRP $ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 519.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 519.99 USD
Free Shipping on orders $49 and up

Revshift - Corporate Logo
T#:1105918
Part#: PSB-E30IX95A
Ships in 8 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:47199273
Part#: PSB-E9X-95A
Ships in 4 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 8 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 8 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Genuine MINI - Corporate Logo
T#:21784
Part#: 31126783443
Ships in 3 Business Days
6% off MSRP $ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
Genuine MINI BALL JOINT

Genuine MINI - Corporate Logo
T#:195113
Part#: 33536863755
Ships in 8 Business Days
11% off MSRP $ 35.98

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 35.98

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
Genuine Bmw Set, Spring Base, Lower
Packaged by Turner - Corporate Logo
T#:24344778
Part#: ECSTMSPDBKT
In Stock
Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane
Show More Show Less
Packaged by Turner - Corporate Logo
T#:338064
Part#: 31129069035
Ships in 2 Business Days
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
Show More Show Less


Meyle Rear Lower Control Arm Bushing Repair Kit - BMW F10 F06/12/13 F...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:23053130
Part#: 3147530002HD
Ships on Sep 22, 2026
$ 199.99 USD
Free Shipping on orders $49 and up
If your rear lower control arm bushings are worn out or have torn, this replacement bushing kit from Meyle is the perfect option to replace these bushings and restore your BMW's handling. This kit includes two inner and one outer bushing for each control arm, plus a snap ring for each of the outer bushings.
Show More Show Less
Meyle Heavy Duty Front Upper Control Arm Bushing Pair - E39 525i/528i...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:2265
Part#: 31129068753MY
Ships on Sep 22, 2026
$ 40.99 USD
Free Shipping on orders $49 and up
The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering.

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel. Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty.

This bushing replaces the one pressed into the upper control arm - otherwise known as a tension strut or strut support arm. It's the arm with the twist. The BMW part numbers for these arms are 31 12 1 141 717 and 31 12 1 141 718.

We can also supply the new control arms with the Meyle HD bushings. We offer new Meyle arms with HD metal ball joints and the HD bushings already pressed in. And we also offer the OEM Lemforder brand with standard ball joints and the Meyle HD bushings pressed in. Choose from the menu below.

Applications
1997-2003 E39 525i, 525iT, 528i, 528iT, 530i sedans and touring wagons
 
Show More Show Less
Meyle Heavy Duty Front Upper Control Arm Bushing Set - E39 540i/M5, E...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:1537
Part#: 31120006482MY
Ships on Sep 22, 2026
$ 39.99 USD
Free Shipping on orders $49 and up
The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering.

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel. Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty.

This bushing replaces the one pressed into the upper control arm - otherwise known as a tension strut or strut support arm. It's the arm with the twist. The BMW part numbers for these arms are 31 12 1 092 609 and 31 12 1 092 610.

These front control arm bushings fit the following BMWs:
1997-2003 E39 5 series 540i, 540iT (sedans and touring wagon)
2000-2003 E39 M5 sedan
1995-2001 E38 7 series 740i, 740iL
1995-2001 E38 7 series 750i, 750iL
Show More Show Less

Cup Kit/Coilover Installation Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:16175687
Part#: 31331091708-KT
Ships in 3 Business Days
Sale - Save 1% $ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 578.28 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 578.28 USD
Free Shipping on orders $49 and up
If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.
Show More Show Less

Rein - Corporate Logo
T#:592172
Part#: 31120393540
Back Ordered
Sale - Save 5% $ 57.99

This product was last offered at the strikethrough price on
08-31-2026

$ 55.09 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 57.99

This product was last offered at the strikethrough price on
08-31-2026

$ 55.09 USD
Free Shipping on orders $49 and up
Fits left or right side - sold individually.
Rein Front Control Arm Retainer - Left - E46
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592211
Part#: 31122229623
Back Ordered
Sale - Save 5% $ 58.99

This product was last offered at the strikethrough price on
08-31-2026

$ 56.04 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 58.99

This product was last offered at the strikethrough price on
08-31-2026

$ 56.04 USD
Free Shipping on orders $49 and up
Includes control arm bushing

Front Control Arm Retainer - Right
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:567102
Part#: 31122229624
Back Ordered
Sale - Save 5% $ 58.99

This product was last offered at the strikethrough price on
08-31-2026

$ 56.04 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 58.99

This product was last offered at the strikethrough price on
08-31-2026

$ 56.04 USD
Free Shipping on orders $49 and up
Includes control arm bushing
Meyle Heavy Duty Rear Shock Mount - E36 E46 Z3
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:367494
Part#: 33521092362
In Stock
$ 23.08

This product was last offered at the strikethrough price on
03-24-2026

$ 17.49 USD
Free Shipping on orders $49 and up
$ 17.49 USD
Free Shipping on orders $49 and up

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality Meyle HD replacement to ensure a tight, noise-free ride.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
1992-1999 E36 BMW
1999-2006 E46 BMW
1995-2002 Z3 BMW

Show More Show Less

Genuine MINI - Corporate Logo
T#:61445
Part#: 33556778828
Ships in 5 Business Days
1% off MSRP $ 21.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.37 USD
Free Shipping on orders $49 and up
1% off MSRP
$ 21.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.37 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT

Cup Kit/Coilover Installation Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644325
Part#: 33306760349-KT
Ships in 4 Business Days
Sale - Save 1% $ 364.99

This product was last offered at the strikethrough price on
08-28-2026

$ 361.15 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 364.99

This product was last offered at the strikethrough price on
08-28-2026

$ 361.15 USD
Free Shipping on orders $49 and up
If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job. See kit contents tab for a list of included components.
Show More Show Less
Rein - Corporate Logo
T#:363445
Part#: 31356765574
In Stock
Sale - Save 5% $ 9.17

This product was last offered at the strikethrough price on
08-31-2026

$ 8.71 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 9.17

This product was last offered at the strikethrough price on
08-31-2026

$ 8.71 USD
Free Shipping on orders $49 and up
As a bushing deteriorates, so does the functionality of the sway bar. With more play, the anti-roll stiffness the sway bar provides decreases, allowing more body roll and poor handling. Replace yours with an OEM Rein sway bar bushing to restore optimal handling characteristics.
Show More Show Less
Axle Carrier Mount
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:4934921
Part#: 33316769376
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Located on the rear axle used as a bushing for the rear axle mount. Replace worn out or damaged rear axle carrier mount.