Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
01-23-2026
The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.
What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).
An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.
Features:
Industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**
Includes $500 core charge to be refunded when we receive your rebuildable core.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Rear Differential Front Bushings for the BMW E60 5-Series and E63 6-Series are specifically engineered to optimize the performance of the rear differential assembly. By replacing the factory rubber bushings with robust polyurethane, these bushings provide numerous benefits that enhance vehicle handling and stability.
Enhanced Power Delivery: The firmer polyurethane material reduces flex and movement in the differential mount, ensuring better alignment and stability. This improvement leads to more effective power transfer from the engine to the wheels, resulting in enhanced acceleration and performance.
Increased Longevity: Powerflex bushings are designed to withstand harsh driving conditions, resisting wear from heat, oil, and road debris. Unlike conventional rubber bushings, which can deteriorate over time, these polyurethane bushings maintain their performance over a longer period.
Improved Handling Dynamics: By minimizing unwanted movement in the rear differential, these bushings enhance the vehicle’s handling characteristics. Drivers will experience reduced body roll and increased traction, allowing for a more controlled and confident driving experience, especially in high-performance situations.
Superior Road Feel: The stiffer construction of these bushings enhances feedback to the driver, improving steering response and overall road feel. This connection allows for a more engaging driving experience, as drivers can better sense the vehicle’s dynamics.
Simple Installation: These bushings are specifically designed to fit the E60 and E63 models directly into the existing differential mounts. The installation process is straightforward, requiring no modifications, which makes it an accessible upgrade for DIY enthusiasts.
This upgrade is perfect for BMW E60 5-Series and E63 6-Series owners seeking to enhance their vehicle’s rear differential performance and overall handling capabilities. The Powerflex Rear Differential Front Bushings offer a reliable solution for improving the effectiveness of the rear suspension system, making them suitable for everyday driving as well as spirited performance applications.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.
What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).
An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.
Features:
An industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**
Includes $500 core charge to be refunded when we receive your rebuildable core.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. *Door Buster Special - New Product*
The Powerflex Rear Diff Front Mount Bushing (Race) for BMW E34 5 Series and E32 7 Series is a premium upgrade designed for enhanced drivetrain stability and performance. Here’s another description:
Race-Grade Polyurethane: Part of Powerflex’s Race Series, this bushing is crafted from a super-stiff polyurethane compound, designed to eliminate the excessive movement found in factory rubber bushings. The Race Series is optimized for track and high-performance driving, where minimizing flex is crucial for precision handling.
Purpose: This bushing replaces the front mount of the rear differential, a critical point where unwanted flex can reduce performance. By stiffening this mount, the bushing ensures improved power transfer to the wheels and reduces drivetrain slop, making the car feel more connected and responsive.
Key Features:
Benefits:
Fitment: Tailored specifically for the BMW E34 (5 Series) and E32 (7 Series) models, this bushing replaces the front differential mount and offers a perfect fit, ensuring no compromises on installation or function.
In summary, the Powerflex Rear Diff Front Mount Bushing (Race Series) is an essential upgrade for BMW E34 and E32 owners looking for improved drivetrain rigidity, better handling, and longer-lasting components. Perfect for performance enthusiasts and track-goers, it enhances rear suspension control and reduces drivetrain movement for sharper, more precise driving experiences.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i
The Powerflex Rear Differential Rear Mount Bushings for the BMW E39 5 Series are designed to provide a significant upgrade to the vehicle's rear differential system by replacing the stock rubber bushings with high-performance polyurethane. This enhancement leads to improved handling, stability, and durability.
Enhanced Differential Control: The stiffer polyurethane material reduces unwanted movement and flex in the differential mount, ensuring better alignment and stability under load. This translates to improved power delivery and handling during cornering and acceleration.
Increased Longevity: These bushings are crafted to resist wear and degradation from oil, heat, and road debris, offering superior durability compared to traditional rubber bushings. This longevity ensures that the performance benefits are maintained over time.
Improved Driver Feedback: By minimizing movement in the rear differential, these bushings enhance the connection between the vehicle and the driver. This results in better feedback and control, allowing for a more engaging driving experience.
Direct Fit for Easy Installation: Designed specifically for the E39 5 Series, these bushings fit directly into the existing differential mounts, facilitating a hassle-free installation process without the need for modifications.
This upgrade is perfect for BMW E39 5 Series enthusiasts who want to improve their vehicle's handling and performance, making it suitable for both daily driving and spirited performance applications. The Powerflex Rear Differential Rear Mount Bushings provide a reliable solution to enhance the overall effectiveness of the rear suspension system.
The Powerflex Rear Diff Bushing for BMW Z3, E30 3 Series, and 318Ti is a high-performance replacement for the factory rubber bushings in the rear differential. This upgrade is ideal for improving handling, power delivery, and drivetrain stability, especially on aging vehicles where the original bushings may have deteriorated.
Polyurethane Construction: Unlike the OEM rubber bushings, Powerflex bushings are made from durable polyurethane, which resists wear from exposure to heat, oil, and road debris. This increases the longevity of the bushing and ensures consistent performance over time.
Handling Improvements: The stiffer polyurethane material significantly reduces the flex and movement of the differential during acceleration, braking, and cornering. This helps improve the overall stability and precision of the vehicle’s rear-end, enhancing cornering performance and delivering better power transfer to the wheels.
Versions for Different Needs:
Direct Fitment: These bushings are designed as direct replacements for the stock bushings, making installation relatively straightforward. This is especially useful for older models like the E30 and Z3, where original bushings may have degraded or cracked, causing clunking noises and excessive differential movement.
Performance Gains: With reduced differential movement, drivers can expect sharper throttle response, improved traction under load, and better cornering dynamics, making it a perfect upgrade for those who want to refresh and enhance the performance of their BMW's rear suspension.
This Powerflex rear diff bushing upgrade is ideal for anyone looking to improve the handling characteristics of their BMW while adding durability and reliability to the drivetrain setup.
Upgrade your vehicle's rear differential with the Revshift Polyurethane Rear Differential Bushing Set, delivering superior performance and stability. Engineered with precision and premium materials, this set is perfect for track applications, offering enhanced handling and reduced drivetrain movement. This kit is ideal for any enthusiast looking to keep their drivetrain from moving during track use.
Key Features:
Easy Installation: Two-piece design enables straightforward installation using the included Revshift bushing lube, making upgrading hassle-free. Track Performance: Designed for race use with maximum stiffness polyurethane. Enhanced Stability: Minimize rear differential movement for improved stability and traction during acceleration, cornering, and braking. Durable Polyurethane Construction: Crafted from high-quality polyurethane, ensuring durability and long-lasting performance under daily driving conditions. Upgrade your vehicle's rear differential with the Revshift Polyurethane Rear Differential Bushing Set to experience a noticeable improvement in handling, stability, and overall driving dynamics. Elevate your racing performance with confidence and precision.
Upgrade your BMW E46 with the Turner Motorsport Wavetrac Limited Slip Differential, featuring innovative design and superior materials for enhanced performance. This differential utilizes patented Wavetrac technology to automatically improve grip in low-traction conditions, setting it apart from traditional torque biasing differentials. Here are the key benefits:
For additional technical information, visit: http://www.wavetrac.net/technical.htm
Fits ratios 2.47 – 3.07.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-07-2026
This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.
This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.
E9X Diff Mount Set includes:
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The perfect upgrade for any E46, this finned differential cover increases cooling to the rear differential to prevent over heating and possible damage. This is a complete kit including fluid and drain plugs.
Includes the following
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Includes rear differential bushing, differential oil temperature sensor.
This item fits the following BMWs:
G20 M340i, M340iX, 330i, 330iX G29 Z4 30i, M40i
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.