Showing 11948 results for ""

Sort By:

Pierburg - Corporate Logo
T#:47164963
Part#: 11781427884
In Stock
$ 279.99

This product was last offered at the strikethrough price on
04-01-2026

$ 210.20 USD
Free Shipping on orders $49 and up
$ 210.20 USD
Free Shipping on orders $49 and up
A new oxygen sensor set can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensors provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary. Sold separately, but four sensors are required. Fits E36 front and rear, M Roadster / Coupe front to 2000. Bosch Part # 13 884. Also replaces 11781437943. This item fits the following BMWs: 1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3 1997-1998 E39 BMW 528i 1998-2002 Z3 BMW Z3 M Roadster M coupe
Show More Show Less
King - Corporate Logo
T#:4840520
Part#: CR6640XP
In Stock at Vendor
$ 163.99

This product was last offered at the strikethrough price on
05-22-2026

$ 148.99 USD
Free Shipping
$ 148.99 USD
Free Shipping
These King Performance Series bearings are recommended for performance applications. These bearings are designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE or upgraded crankshafts. These King Performance Series bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. The bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow.
Show More Show Less
OEM Elring Oil Drain Plug - E46 E60 E63 E64 E9X Z3 Z4
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2691332
Part#: 7119904550
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up
Replacement oil drain plug from OEM Elring

NRW Design - Corporate Logo
T#:42436711
Part#: UBBOC
Ships in 3 Business Days
$ 189.99 USD
Free Shipping on orders $49 and up
The reliable and stylish choice for performance-minded owners. Upgrade your BMW’s form and function with NRW Designs The Ultimate BMW Billet Oil Cap

Supertech - Corporate Logo
T#:26038568
Part#: SPRKH1000DBMST
In Stock
20% off MSRP $ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD
Free Shipping on orders $49 and up
Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy, these valve springs offer exceptional performance and durability even at high RPMs. CAD engineering ensures that the wire stress levels remain within defined limits for long-lasting durability, even under extreme racing conditions. Advanced computer software allows Supertech to meticulously control harmonics, ensuring optimal performance. Manufactured with high-quality military-certified Steel, the retainers are CNC machined to provide a precise fit, guaranteeing longevity and reliability.
Show More Show Less
MMX Performance - Corporate Logo
T#:4552069
Part#: MMR20-1002
Ships in 7 Business Days
$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping
Anyone with a modified S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. This capture plate can be secured to the OEM crank bolt or to MMR's redesigned one-piece crank hub. *Installation recommended by a professional shop or technician.
Show More Show Less

Eagle - Corporate Logo
T#:640320
Part#: CRS5313B63D
In Stock at Vendor
$ 619.99 USD
Free Shipping
$ 619.99 USD
Free Shipping
Eagle is synonymous with exceptional quality and unwavering commitment to customer satisfaction, which has cultivated a loyal and satisfied customer base. This dedication has propelled Eagle to unparalleled growth throughout the years, expanding their product range to include crankshafts and a wider selection of connecting rods. Key Benefits: Proven Excellence: Eagle's reputation as the largest and most respected aftermarket connecting rod and crank manufacturer underscores their commitment to excellence. Continuous Advancements: Eagle's relentless pursuit of perfection is evident in their continuous design enhancements, materials innovation, and manufacturing techniques, ensuring their products are always at the forefront of performance. Lightweight Design: Eagle prioritizes making their products lighter, enhancing your engine's performance while maintaining structural integrity. Strength and Durability: Every Eagle connecting rod is engineered for superior strength, ensuring your engine can handle high-performance demands without compromise. Efficient Manufacturing: Eagle's dedication to efficiency guarantees that each connecting rod is manufactured with precision and attention to detail, resulting in top-notch quality. Diverse Applications: With a diverse product range, Eagle ensures compatibility with a wide variety of engines, making their connecting rods a versatile choice for automotive enthusiasts.
Show More Show Less
Lemforder - Corporate Logo
T#:7555
Part#: 22111092823
Ships in 1 Business Day
$ 105.99

This product was last offered at the strikethrough price on
05-07-2026

$ 101.99 USD
Free Shipping
$ 101.99 USD
Free Shipping

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

This mount is for the left/dirver's side.

This is a direct replacement for the factory motor mount for M62 V8 engines and M73N V12 engines. Manufactured by OE Supplier Lemfoerder.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1997-2001 E38 BMW 740i 740il
1999-2001 E38 BMW 750il

Show More Show Less

NRW Design - Corporate Logo
T#:42403031
Part#: S65VCWRD
Ships in 3 Business Days
$ 1,199.99 USD
Free Shipping on orders $49 and up
With the NRW Designs S65 Aluminum Valve Covers finished in Wrinkle Red, BMW owners can enhance the reliability, style, and longevity of their S65 engine.

Bosch - Corporate Logo
T#:19326
Part#: 12311726022
In Stock at Vendor
$ 68.99

This product was last offered at the strikethrough price on
04-09-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
This is the voltage regulator found on the back of the alternator. It's a normal wear item and the contacts are the first thing to check if you believe the alternator is not charging the battery (lights flickering or dim, battery light on in the dash, the engine quits without warning, or other electrical failures). The voltage regulator manages the voltage flowing through the car, especially to and from the battery. There are two carbon contacts on the regulator that control the magnetic field when the alternator is spinning and these contacts wear over time. A new set of contacts will be about 13mm in length. Anything less than 5mm and the voltage regulator should be replaced, regardless if that is the cause of your electrical problems or not. Most older mechanics will tell you to keep a spare regulator in your toolbox.

The carbon contacts can be replaced on their own but requires desoldering the old ones from the base and then soldering the new ones on. It may be easier to just replace the unit as a whole.

This is the OEM voltage regulator, made by Bosch or Hella. It's the one with the white base and fits most Bosch alternators from 1977-1995 (Valeo and other alternators look very different and have a black cover and base). This part number replaces the previous BMW part numbers - 12311271664, 12321279548, 12311722755, 12321711399 and Bosch part numbers 1197311021 and 1197311028.
Show More Show Less
Febi - Corporate Logo
T#:374103
Part#: 11311738700
Ships in 4 Business Days
$ 63.99

This product was last offered at the strikethrough price on
08-24-2026

$ 55.99 USD
Free Shipping
$ 55.99 USD
Free Shipping
Guide used to tension the timing chain


Victor Reinz - Corporate Logo
T#:592881
Part#: 11367507729
Ships in 2 Business Days
$ 3.99 USD
Free Shipping on orders $49 and up
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.
Bosch - Corporate Logo
T#:2912
Part#: 12137594936
Ships in 1 Business Day
$ 45.99

This product was last offered at the strikethrough price on
05-07-2026

$ 45.54 USD
Free Shipping on orders $49 and up
$ 45.54 USD
Free Shipping on orders $49 and up

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the OEM Bosch ignition coil for the N52 engine used in cars up to 4/2006 production date. You can find your car's production date on the driver's door pillar in MM/YY format. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part number 12137548553.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Sold per coil. Includes connecting boot.

This item fits the following BMWs:
2006-4/2006 E90 BMW 325i 325xi 330i 330xi
2006-4/2006 E60 BMW 525i 525xi 530i 530xi
2006-4/2006 E85 BMW Z4 3.0i Z4 3.0si

Show More Show Less

Canyon Engine - Corporate Logo
T#:376784
Part#: 11121263642
Ships in 2 Business Days
$ 7.59 USD
Free Shipping on orders $49 and up
Frequent cause of oil consumption in high-mileage engines

Victor Reinz - Corporate Logo
T#:581936
Part#: 714131700
In Stock at Vendor
$ 33.99 USD
Free Shipping on orders $49 and up
Seals the intake collectors/runners to the lower intake manifold
Bosch - Corporate Logo
T#:372635
Part#: 0221504474
Ships in 1 Business Day
$ 184.99

This product was last offered at the strikethrough price on
08-03-2026

$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping

If you are experiencing misfires or rough idle issues, the cause could be a failing ignition coil. Bosch Ignition Coils are the perfect OEM replacement to restore perfect operation to your ignition system.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

For the following BMW engines: M42 M60 M62 M50 S50

Show More Show Less

VTT Billet Power Steering Pulley - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:7292042
Part#: VTT-N54-PSN54
Ships in 2 Business Days
Starting at $ 56.99 USD
Free Shipping on orders $49 and up
Starting at $ 56.99 USD
Free Shipping on orders $49 and up
Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.
Show More Show Less
Brake Switch - 4 Prong
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373217
Part#: 61318360417
Back Ordered
$ 15.52 USD
Free Shipping on orders $49 and up
$ 15.52 USD
Free Shipping on orders $49 and up
Located on the brake pedal, this switch is vital to your brake light function. In the event that your vehicle's brake lights are not working and simultaneously showing a "brake light circuit failure", you should replace this part.
Show More Show Less

Air Temperature Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:403093
Part#: 13621739510
Ships in 1 Business Day
$ 14.99 USD
Free Shipping on orders $49 and up
Monitors intake air temperature

Crankshaft Position Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:37858379
Part#: 13627839138
In Stock
$ 22.43 USD
Free Shipping on orders $49 and up
The flywheel sensor monitors the rotational speed of the flywheel and transmits this data to the ECU/DME, which uses it to optimize engine performance. A faulty flywheel sensor can lead to rough running or prevent the engine from starting altogether.
Show More Show Less
F3X/F2X - N20 EKP PNP Cooler Kit
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26471604
Part#: AT226F22BLA501N2
Ships in 1 Business Day
$ 44.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With 5015 Fan or 60mm Noctua Fan (depending on choice) 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less
Bosch - Corporate Logo
T#:2991
Part#: 11781716156
Ships in 1 Business Day
$ 153.18

This product was last offered at the strikethrough price on
04-09-2026

$ 139.48 USD
Free Shipping
$ 139.48 USD
Free Shipping
This direct fit Bosch oxygen sensor plugs directly into your factory connector. No cutting or splicing required. A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary It fits BMW E23 E24 E28 E30. Bosch # 13 049.

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es
1985-1988 E28 BMW 535i 535is
1985-1987 E24 BMW 635csi
1985-1986 E23 BMW 735i
Show More Show Less


URO - Corporate Logo
T#:2853
Part#: 11611432559
Ships in 1 Business Day
$ 14.99 USD
Free Shipping on orders $49 and up
$ 14.99 USD
Free Shipping on orders $49 and up
This Crankcase Vent Hose - From Valve Cover to Oil Separator fits BMWs with the M52 or M54 6 cylinder engine including E46 323i 325i 328i 330i E39 525i 528i 530i E60 525i 530i X3 2.5i 3.0i X5 3.0i Z3 2.5 2.8 3.0i Z4 2.5i 3.0i.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - only with M54 engine
1999-2003 E39 BMW 528i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Show More Show Less
ACL - Corporate Logo
T#:638405
Part#: 6B1569HX
In Stock at Vendor
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Includes upper and lower bearing shells for a complete rod bearing replacement. Race Series with 0.025mm (.001”) extra clearance for better oiling. High-performance Trimetal engine bearings Designed to withstand higher RPM conditions High-strength overlay plate with reduced thickness for improved fatigue properties
Show More Show Less
Rein Piston Ring Set
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379819
Part#: 11251437077
Ships in 4 Business Days
$ 31.99 USD
Free Shipping on orders $49 and up
Standard bore replacement piston rings

URO Ignition Coil - E30, E32, E34, E36, E38
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592983
Part#: 12139066468
Ships in 1 Business Day
$ 37.99 USD
Free Shipping on orders $49 and up
Eliminate misfires and restore smooth engine operation with a brand new igniton coil from URO

Rein - Corporate Logo
T#:379806
Part#: 11251713192
Ships in 3 Business Days
$ 30.99 USD
Free Shipping on orders $49 and up
$ 30.99 USD
Free Shipping on orders $49 and up
For use on stock pistons, will need 6 sets to replace all piston rings in the engine
OE Continental Power Steering Belt - 10X800 - E30
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:361102
Part#: 32421717953
In Stock
$ 10.99 USD
Free Shipping on orders $49 and up
$ 10.99 USD
Free Shipping on orders $49 and up

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance.


Genuine BMW Fan Belt - 10X800
This item fits the following BMW Chassis:
E30

Show More Show Less

Mann - Corporate Logo
T#:341095
Part#: 11429063138
Ships in 1-3 days
$ 22.99 USD
Free Shipping on orders $49 and up

OEM Mann replacement oil filter. 

This item fits the following BMW Chassis:
E12, E28, E34, E24, E23, E32

Fits BMW Engines including:
M30,S38

Show More Show Less
General Purpose Hose Clamp - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592737
Part#: 07129952104
Ships in 4 Business Days
$ 6.99 USD
Free Shipping on orders $49 and up

Rein Crankcase Ventilation Return Pipe - E60, E90, Z4
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:402081
Part#: 11157567801
Ships in 4 Business Days
$ 81.38

This product was last offered at the strikethrough price on
08-13-2026

$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping
Located under intake manifold

Performance Tool - Corporate Logo
T#:1809154
Part#: W5368
Ships in 1 Business Day
$ 13.68 USD
Free Shipping on orders $49 and up
A must for any toolbox.
Victor Reinz - Corporate Logo
T#:586754
Part#: 11612246945
Ships in 2 Business Days
$ 4.07 USD
Free Shipping on orders $49 and up
6 required
ARP - Corporate Logo
T#:2192
Part#: 201-5002
In Stock at Vendor
$ 171.99 USD
Free Shipping on orders $49 and up
This ARP main stud set is for the S54 3.2 liter, as found in all 2001 to 2006 E46 M3, as well as the 2006-2008 Z4 M Roadster and M Coupe models. Switching to the ARP main stud kit eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This S54 main stud kit includes hardened parallel-ground washers and aerospace quality nuts.

The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the E30 M3, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This ARP main stud kit fits the following BMWs:
2001-2006 E46 M3 3.2 liter coupe/convertible
2001-2002 MZ3 M Coupe & M Roadster (S54 engine)
2006-2008 MZ4 M Coupe & M Roadster
Show More Show Less


Victor Reinz - Corporate Logo
T#:362180
Part#: 12111734032
Ships in 2 Business Days
$ 3.99

This product was last offered at the strikethrough price on
08-13-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
Seals distributor flange to engine block
Febi - Corporate Logo
T#:28337855
Part#: 11151703484KIT
Ships in 1 Business Day
$ 108.14 USD
Free Shipping on orders $49 and up

Rubber breather pipes in various BMW applications are susceptible to cracking. Over time, engine heat and weather conditions can weaken these hoses, leading to breaks or leaks. This results in significant vacuum leaks that can severely affect engine performance.

Moreover, BMW faces a problem with oil separators freezing in cold weather, particularly if the engine isn't adequately warmed up during driving. Typical signs include a howling noise and subsequent oil leaks.

Show More Show Less
Fuel Injector Clinic - Corporate Logo
T#:28104826
Part#: IS801-0525H
Ships in 4 Business Days
$ 515.00 USD
Free Shipping on orders $49 and up
BMW S54 525cc Fuel Injectors - Set Of Six offers high-performance fuel delivery for BMW E46 M3 and Z4 M models. These injectors feature high impedance Bosch cores and are E85 compatible, ensuring reliable performance across a range of fuels. Each injector is precision-matched using advanced Data Match Technology, with individual serial numbers and detailed flow matching information provided.
Show More Show Less

Bottom-End Gasket Set - E30 M3
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:285
Part#: 11111316993
Ships in 1 Business Day
$ 101.99

This product was last offered at the strikethrough price on
05-07-2026

$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping

This set of OEM gaskets covers everything you might need when re-sealing the bottom-end of the E30 M3's S14 engine. Using a complete gasket set will save you time and money if you have the engine out of the car and are performing any major repairs with the oil pan and timing covers off the motor. This is the correct S14 bottom-end gasket set, not a re-packaged M10 kit.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time.

Complete Parts List

(click to expand)

BMW p/nQtyDescription

071199063282large timing rail lower seal, 10x2

071199631303engine block plug gasket ring, A12x15.5

071199631511oil drain plug gasket ring, A12x17

071199632002block coolant drain gasket ring, A14x18

111317279741upper oil pan gasket

111317279831lower oil pan gasket

111413083421front crankshaft shaft seal, 44x60x10

111413126161timing cover gasket, left

111413126171timing cover gasket, right

111417279751rear main seal cover gasket

111422495331rear main seal, 90x110x12

114112504212oil pump hose o-ring

114213126071oil filter housing gasket

115113096921water pump profile gasket

126112771291oil sender gasket ring, 40x4

 


This item fits the following BMWs:
1987-1992 E30 BMW M3 2.3L or 2.5L conversion

 

Show More Show Less

NRW Design - Corporate Logo
T#:20584683
Part#: S65VCSY
Ships in 3 Business Days
$ 1,199.99 USD
Free Shipping on orders $49 and up
For BMW M3 owners seeking a bold, durable, and functional engine bay upgrade, the NRW Designs S65 Aluminum Valve Cover - Smooth Yellow from Turner Motorsport offers the ideal combination of form and function.
Show More Show Less
Victor Reinz - Corporate Logo
T#:374781
Part#: 11367831938
In Stock at Vendor
$ 18.75

This product was last offered at the strikethrough price on
05-11-2026

$ 18.45 USD
Free Shipping on orders $49 and up
$ 18.45 USD
Free Shipping on orders $49 and up
Used to seal the Vanos unit to the cylinder head

Rein Piston Ring Set - Priced Per Piston
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592811
Part#: 11251713178
Ships in 4 Business Days
$ 28.99 USD
Free Shipping on orders $49 and up
Replace your worn rings - 84.000mm
URO - Corporate Logo
T#:639488
Part#: 11367548459
In Stock
$ 5.99 USD
Free Shipping on orders $49 and up
URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Set Of Gaskets This item fits the following BMW Chassis: E70 X5M,E71 X6M,E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83
Show More Show Less

Baum Tools - Corporate Logo
T#:589888
Part#: B2249117KIT
Ships in 5 Business Days
$ 635.99 USD
Free Shipping
$ 635.99 USD
Free Shipping
Timing tool set for BMW N63 and S63 V8 engines.

Corteco - Corporate Logo
T#:391381
Part#: 11217838071
In Stock
$ 51.11

This product was last offered at the strikethrough price on
04-27-2026

$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Replace when doing a clutch job.
MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less
Atlantic Automotive Engineering - Corporate Logo
T#:45757458
Part#: 32427830838
In Stock
$ 50.99 USD
Free Shipping on orders $49 and up
A new power steering pulley is key to keeping your steering system smooth and reliable. Over time, pulleys can warp, crack, or wear, causing belt slippage, whining noises, or even pump failure. Installing a fresh pulley restores correct belt alignment, eliminates noise, and maintains consistent hydraulic pressure for precise, effortless steering. Why choose a new pulley? Smooth operation – Ensures proper belt tension for dependable pump performance. Noise reduction – Eliminates squealing, whining, or vibration from worn pulleys. System protection – Protects the pump and steering components from damage. Install a new pulley and keep your steering system running quietly, efficiently, and confidently.
Show More Show Less


Weistec - Corporate Logo
T#:22690726
Part#: 01-563-01794-6
Ships in 1 Business Day
$ 239.00 USD
Free Shipping on orders $49 and up
Direct replacement/bolt in for the S63 and S63TU engines. CNC machined 6061 aluminum Anodized in Black
F3X/F2X - N55 EKP PNP Cooler Kit
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26471608
Part#: AT223F22BLA501N5
Ships in 1 Business Day
$ 44.99 USD
Free Shipping on orders $49 and up
A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less