Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:38587650
Part#: N54PCVVR
In Stock
$ 40.00 USD
Free Shipping on orders $49 and up
The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.
Show More Show Less
Ina - Corporate Logo
T#:2045
Part#: 11281748131
In Stock
$ 20.25 USD
Free Shipping on orders $49 and up
$ 20.25 USD
Free Shipping on orders $49 and up

This is an OEM INA tensioner pulley, also known as the adjusting pulley and lower pulley. This pulley is mounted on the belt tensioner near the center of the belt assembly. The upper and lower pulleys are known to be the primary sources for 'belt squealing'. This pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

This pulley is mounted along with the hydraulic belt tensioner but can be replaced on its own. It is used for the main drive belt on the M50-M54 family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines). This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time. If you have a mechanical belt tensioner, the pulley can only be replaced with a new tensioner.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

If you need the hydraulic belt tensioner, click here.

This item is 70mm Diameter. Please check the diameter before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i - Only for Hydraulic Tensioner
1999-2000 E46 323i, 323Ci, 328i, 328Ci - Only for Hydraulic Tensioner
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi - Only for Hydraulic Tensioner
2001-2006 E46 M3 coupe & convertible - Only for Hydraulic Tensioner
2000-2006 X5 3.0 liter (E53 chassis)
2004 E60 525i, 530i (M54 engine)
1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

Show More Show Less
Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less

OEM INA Accessory Belt Tensioner Assembly - N55 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:394063
Part#: 11288604266
In Stock
$ 79.99

This product was last offered at the strikethrough price on
06-08-2026

$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up

Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.

Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16

Fits the following BMW engines:
N55 3.0L, S65 3.0L

Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:43378539
Part#: B58G1OFH
In Stock
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

OEM INA Deflection Pulley - N55 3.0L, S55 3.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554453
Part#: 11288673720
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Pulleys begin to squeak once they are reaching the end of their life span and if not replaced, can seize up and lead to a long host of problems that would leave you stranded on the side of the road.

Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
OEM INA Timing Belt Tensioner Roller -- E21 E30 E12 E28 E34
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:348865
Part#: 11311711153
In Stock
$ 54.99 USD
Free Shipping on orders $49 and up

This is an OEM INA timing belt tensioner that keeps pressure on the engines timing belt and prevents its from slipping out of time. OEM replacement for BMW part # 11311711154 and 11311711153.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

 

Show More Show Less
Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
In Stock
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.


OEM INA Hydraulic Valve Lifter -- M62 BMW
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19050
Part#: 11321440256
Ships in 1 Business Day
$ 82.13

This product was last offered at the strikethrough price on
07-10-2026

$ 75.26 USD
Free Shipping on orders $49 and up
$ 75.26 USD
Free Shipping on orders $49 and up

Any time a valve service must be performed or there is valve damage, it is recommended to replace the hydraulic lifters to keep the valve train in top condition. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM INA A/C Belt Tensioner - BMW E36 E39 M50 M52 S50 S52
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:579839
Part#: 5330001100
Ships in 1 Business Day
$ 61.11 USD
Free Shipping on orders $49 and up
$ 61.11 USD
Free Shipping on orders $49 and up
Provides tension between crank pulley and A/C compressor
OEM INA Accessory Belt Tensioner Assembly - BMW N20 2.0L
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:587382
Part#: 11287594969
In Stock
$ 72.99

This product was last offered at the strikethrough price on
04-15-2026

$ 43.99 USD
Free Shipping on orders $49 and up
$ 43.99 USD
Free Shipping on orders $49 and up
This is the main belt tensioner for the accessory belt.

Ina - Corporate Logo
T#:12942
Part#: 11281709613
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Hydraulic Tensioner. It provides pressure to the Water Pump and Alternator belt to assure maximum performance and prevent the belt from slipping, causing decreased cooling or low charge rates from the alternator.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

Show More Show Less

OEM INA Idler / Deflection Pulley - E9x E82 E83 E60 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:12945
Part#: 11287535860
In Stock
$ 23.28 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


For cars with the N52 6 cylinder engine.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2007-2010 E70 BMW X5 3.0si
2007-2010 E83 BMW X3 3.0i X3 3.0si

Show More Show Less
Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

OEM INA Chain Tensioner Piston - BMW M10 M30 M70 S70 M73
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:35998430
Part#: 11310631131
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up

INA - Chain Tensioner Piston for BMW Engine Performance

INA - Chain Tensioner Piston is an essential component for maintaining the precision and reliability of your BMW engine. Designed to deliver superior performance, this OEM-grade part ensures optimal tension in the timing chain, preventing slack, excessive wear, and potential engine damage. Available through Turner Motorsport, this chain tensioner piston guarantees compatibility and lasting durability for a variety of BMW models.

Key Benefits:

  • OEM-quality part engineered for BMW vehicles
  • Enhances timing chain performance for smoother engine operation
  • Reduces chain noise and prevents premature wear
  • Built with high-strength materials for maximum durability
  • Simplifies installation with an exact-fit design

Ensure your BMW operates at peak efficiency by upgrading to the INA - Chain Tensioner Piston, available at Turner Motorsport. This premium component is a must-have for engine repairs, regular maintenance, and improved vehicle performance.

Show More Show Less
Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 41.86

This product was last offered at the strikethrough price on
03-26-2026

$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less

Burger Motorsports - Corporate Logo
T#:38621421
Part#: BMS-OCC-S55
Ships on Aug 28, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
Includes 18" NBT bung The S55 BMW turbo engine often faces oil control challenges, resulting in oil blow-by that contaminates the intercooler and charge piping, clogs intake valves and the VANOS system, lowers effective octane, and diminishes engine performance—especially at higher boost levels. The BMS Oil Catch Can provides the ultimate solution. Unlike generic catch cans that suffer from poor mounting, restrictive baffles, inadequate ventilation, or improper PCV integration, the BMS OCC is specifically engineered for turbo BMW applications. Key Features: ✅ CNC-machined precision construction—seamless design for a perfect fit and long-lasting durability ✅ Optimized hose diameter and flow rate—prevents crankcase pressure buildup ✅ Fully sealed PCV system—ensures no vapor leaks into the atmosphere ✅ Strategic mounting location—minimizes line length for efficient performance and a stealthy install ✅ Fast 20-minute installation—comes with all necessary hardware and is easily reversible ✅ Simple oil disposal—drain via the plug or removable base during oil changes Proudly made in the USA, the BMS Oil Catch Can delivers long-term engine protection while optimizing performance and reliability.
Show More Show Less

Ina - Corporate Logo
T#:31059479
Part#: 11287838194KT
Ships on Aug 28, 2026
$ 30.99

This product was last offered at the strikethrough price on
08-11-2026

$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
If your water pump or alternator belt tensioner has failed because of the pulley or bearing, this replacement pulley is all you need to get your BMW back on the road! BMW and other brands usually sell the tensioner with the metal arm included, which increases the cost, even though the arm often doesn't need replacement. This OEM replacement is a much more affordable option, saving you $150 or more compared to the Genuine BMW tensioner.
Show More Show Less
OEM INA A/C Belt Hydraulic Tensioner -- E39 E38 E31 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362596
Part#: 11281745545
In Stock
$ 51.99

This product was last offered at the strikethrough price on
06-16-2026

$ 50.59 USD
Free Shipping on orders $49 and up
$ 50.59 USD
Free Shipping on orders $49 and up

This is an OEM INA Hydraulic Tensioner. It provides pressure to the A/C belt to assure maximum performance out of the A/C compressor and prevent the belt from slipping.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

Show More Show Less
Burger Motorsports - Corporate Logo
T#:43378540
Part#: B58G2OFH
Back Ordered
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.


Ina - Corporate Logo
T#:403662
Part#: 11311738700
In Stock
$ 56.20

This product was last offered at the strikethrough price on
07-23-2026

$ 47.99 USD
Free Shipping on orders $49 and up
$ 47.99 USD
Free Shipping on orders $49 and up
Guide used to tension the timing chain
OEM INA Idler Pulley -- N55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:402395
Part#: 11287615130
In Stock
$ 35.34

This product was last offered at the strikethrough price on
05-06-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less
Genuine BMW Hydraulic Belt Tensioner - BMW E34 M50
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591480
Part#: 11281722789
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
This item has been superseded to 11287838797


Ina - Corporate Logo
T#:19306
Part#: 11287557851
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less

OEM INA Deflection Pulley -- N62 E60/1 E63/4 E65/6/7 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362736
Part#: 11287549557
Ships on Aug 28, 2026
$ 30.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:42302011
Part#: VV1122
In Stock
$ 77.99 USD
Free Shipping on orders $49 and up
$ 77.99 USD
Free Shipping on orders $49 and up
For BMW owners looking to maintain factory-grade precision and reliability your BMW demands—ensuring reliable, responsive performance for years to come.

OEM INA Idler Pulley -- E88 E82 E9X
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386299
Part#: 11287578675
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:31092500
Part#: 11287838196KT
Ships in 1-2 days
$ 25.99 USD
Free Shipping on orders $49 and up
$ 25.99 USD
Free Shipping on orders $49 and up
If your air conditioning belt tensioner has failed because of the pulley or bearing, this replacement pulley is all you need to get your BMW back on the road! BMW and other brands usually sell the tensioner with the metal arm included, which increases the cost, even though the arm often doesn't need replacement. This OEM replacement is a much more affordable option, saving you $180 or more compared to the Genuine BMW tensioner.
Show More Show Less

Ina - Corporate Logo
T#:42302009
Part#: VV1123
In Stock
$ 59.99 USD
Free Shipping on orders $49 and up
For BMW owners and professionals who prioritize longevity and precision, the OEM INA Engine Timing Camshaft Sprocket is the ideal solution to keep modern BMW engines running flawlessly.

OEM INA Deflection Pulley -- E88 E82 E9X E84
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386298
Part#: 11287578674
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
Burger Motorsports - Corporate Logo
T#:21045500
Part#: BMS-BOFC
In Stock
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA
Show More Show Less


Ina - Corporate Logo
T#:4469
Part#: 11311743187
In Stock
$ 67.65

This product was last offered at the strikethrough price on
05-06-2026

$ 51.99 USD
Free Shipping on orders $49 and up
$ 51.99 USD
Free Shipping on orders $49 and up

This timing chain tensioner keeps the tension rail properly positioned on the BMW M42 and M44 4 cylinder engine.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1999 Z3 BMW Z3 1.9

Show More Show Less
Ina Deflection Pulley - E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591636
Part#: 11287799859
In Stock
$ 50.14 USD
Free Shipping on orders $49 and up
Accessory drive belt idler pulley
Ina - Corporate Logo
T#:42301978
Part#: ZC0286
Ships in 8 Business Days
$ 26.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers this genuine OEM INA Engine Timing Chain (Upper) as a reliable solution to maintain BMW engine integrity and performance, ensuring your vehicle runs like new.

Valeo Voltage Regulator - Valeo - E53, E60, E63, E64, E70
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:1196078
Part#: 12318510090
Ships in 1 Business Day
$ 91.37 USD
Free Shipping on orders $49 and up
$ 91.37 USD
Free Shipping on orders $49 and up
OEM replacement for you BMW alternator fixing charging issues

Ina Idler Pulley - A/C Compressor Belt - E30
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:554407
Part#: 64551721844
Ships in 1 Business Day
$ 42.08 USD
Free Shipping on orders $49 and up
Voltage Regulator
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:594108
Part#: 12317603775
Ships in 1 Business Day
$ 71.22

This product was last offered at the strikethrough price on
05-04-2026

$ 70.45 USD
Free Shipping on orders $49 and up
$ 70.45 USD
Free Shipping on orders $49 and up
Have you noticed inconsistent electrical power in your interior lately? Your voltage regulator is responsible for maintaining a constant voltage out from the alternator.

OEM INA A/C Tensioner Pulley -- E36 M44 M42, Z3 S52 M52
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:361134
Part#: 11282245087
Ships in 1-2 days
$ 44.99 USD
Free Shipping on orders $49 and up

This is an OEM INA A/C tensioner for the serpentine belt on your BMW. This tensioner keeps the belt for the Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:11808
Part#: 11287512758
In Stock
$ 56.99 USD
Free Shipping on orders $49 and up
$ 56.99 USD
Free Shipping on orders $49 and up
This is an OEM INA mechanical tensioner for 2003+ BMW's with the M54 or M56 engine. These belt tensioner units are known to fail, and include the tensioner pulley (as shown). OEM Schaeffler (INA, LuK, Ruville, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high-quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38655170
Part#: BMS-BOVA-G3B58
Back Ordered
$ 99.00 USD
Free Shipping on orders $49 and up
$ 99.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.
Show More Show Less
Ina - Corporate Logo
T#:20254639
Part#: 11367583819
In Stock
$ 101.99 USD
Free Shipping on orders $49 and up

Improve the performance and reliability of your BMW N20 2.0L engine with the BMW N20 2.0L Timing Chain Sprocket for the exhaust camshaft. This high-quality replacement part ensures precise timing and smooth operation of the exhaust camshaft, enhancing overall engine efficiency and longevity.

  • Enhances engine performance and reliability
  • Ensures precise timing of the exhaust camshaft
  • High-quality construction for long-lasting durability
  • Compatible with BMW N20 2.0L engines
If your timing chain sprockets are worn or damaged, replace them with this replacement part to ensure that your car has proper timing at all times.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.


Ina - Corporate Logo
T#:377083
Part#: 12317560483
In Stock
$ 63.99 USD
Free Shipping on orders $49 and up

This is an OEM INA alternator pulley. Keep your belt drive system in top shape with this new pulley.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Burger Motorsports - Corporate Logo
T#:23880741
Part#: N54STCCPBO
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.
Show More Show Less