Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
BMW & MINI B46 B58 CTS Turbo High Performance Ignition Coil is designed to enhance the ignition system of your BMW and MINI vehicles, providing a significant upgrade over factory components. Ideal for F/G series BMWs, F series MINIs, and A series Toyota Supra vehicles, these ignition coils deliver a 10% stronger spark compared to stock units, ensuring optimal engine performance. No additional tuning is required for installation, making this a straightforward upgrade. Also compatible with 2020+ Toyota Supra B46/B58 and 2014+ F5X Mini Cooper models.
Protect your Mini with the Turbo Heat Shield, an essential accessory to prevent hood paint discoloration, scoop warping, and underhood heat damage caused by excessive turbocharger heat. Additionally, it enhances the underhood appearance of your MINI. This metal plate mounts to factory points using supplied hardware, effectively reducing the amount of heat that bypasses the factory shield. While not encasing the turbocharger entirely, it serves as a secondary defense, complementing the factory-installed heat shield that isn't fully effective in preventing long-term hood paint and scoop damage.
This product was last offered at the strikethrough price on
08-13-2026
This product was last offered at the strikethrough price on
08-13-2026
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.
Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330
Introducing the newly updated R55 through R59 Oil Catch Can kit for MINIs equipped with the N16 or N18 engine. This kit includes a "designed-to-fit" stainless steel bracket, mounting hardware, and pre-assembled hoses for easy installation—no drilling or special tools needed. Note: This kit has been redesigned to fit directly behind the outlet of the airbox on the firewall, using the factory tab located on the firewall.
Despite skepticism from "forum experts and social hysteria," an Oil Catch Can (OCC) is essential. Many MINI owners suffer from carbon buildup on their intake valve due to oil being recycled through the intake tract. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup, preventing performance-hindering oil film and sludge. Direct injection in 2007 & up MINIs exacerbates the issue, leading to oil blow-by burning onto intake valves, resulting in power loss and expensive repairs.
By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures optimal engine performance. Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets, installation is super easy.
The M7 Oil Catch Can is not only functional but also a work of automotive performance ART! It features a 100% carbon fiber housing with CNC machined billet aluminum top and bottom, adding a sharp look to your engine compartment.
All hoses, brackets, clamps, necessary fittings, and easy-to-follow detailed step-by-step instructions are included, along with an oil drain plug and an easy-to-view sight tube. The sight tube allows you to monitor the oil level in the can. The hoses are high-quality "Made in the USA" automotive grade, designed to withstand the rigors of the under-hood environment without degradation.
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.
This part fits the following BMW engines:
S54
This part fits the following chassis:
E46, Z3, Z4
M7 Speed proudly presents the Limited Edition Turbo Heat Shield for all Gen 2 Turbocharged 1.6-liter MINI Coopers. This exclusive release features the same top-selling heat shield, now in a custom Hacienda Wrinkle Red powder coat finish. Perfectly complementing the limited edition MAXX Flo intake system also available in this striking red finish.
This new color has gained popularity among young tuner enthusiasts, adding a vibrant touch under the hood and a distinct WOW effect for MINI owners aiming to stand out. Made in the USA from 0.09in [2.2mm] heavy gauge aluminum material, CNC laser cut, and CNC formed, this heat shield ensures consistently high quality. Lined with ceramic thermal insulation on the underside, it minimizes heat transfer to the hood and top side of the engine compartment, proven effective even on professional race cars subjected to extreme heat.
M7 Speed leads the way in MINI adventure motoring, overlanding, and ultimate performance products. Committed to exceptional customer service and product innovation, we engineer and produce high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, known as Race City USA, we're at the heart of North American motorsports.
Enhance your R60/R61 Countryman and Paceman with the M7 Oil Catch Can Kit, meticulously crafted by M7 Speed. This kit is an ideal bolt-in solution, precisely tailored for the Mini Cooper platform, ensuring a seamless installation process without any modifications required. Featuring pre-assembled hoses and stainless steel mounting hardware, this catch can kit ensures hassle-free setup. It effectively prevents oil contamination in the intake tract, protects against premature sensor failure, and maintains consistent engine performance at its peak. Crafted from bright black anodized billet aluminum and stainless steel bracket, this catch can kit not only ensures functionality but also adds a sophisticated touch to your engine compartment.
The newly updated R55 through R59 Oil Catch Can kit for MINIs equipped with the N16 or N18 engine comes with a "designed-to-fit" stainless steel bracket, mounting hardware, and pre-assembled hoses. Installation is super easy... no drilling and no special tools are needed.
Note: This kit has been redesigned to fit on the firewall directly behind the outlet of the airbox. It uses the factory tab located on the firewall.
"Forum experts and social hysteria" may say an OCC is not needed, but we beg to differ. Many MINI owners suffer from carbon buildup on their intake valve due to oil being recycled through the intake tract to be burned.
With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup, which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors, and on your engine's intake valves.
This oil film & sludge can appear in other critical places throughout the engine, such as the intercooler and the MAF sensor (Mass Air Flow), where clean surfaces are critical for maximized heat transfer and engine performance.
With our exclusive "Exact-Fit" pre-assembled hose kit and brackets, installation is super-easy. All hoses, brackets, clamps, necessary fittings, and easy-to-follow detailed step-by-step instructions are included. An oil drain plug and an easy-to-view sight tube are also provided, allowing you to monitor the oil level in the can.
Beware of other "low-cost" catch can systems that use silicone hoses, as oil and silicone are not compatible and silicone hoses will eventually deteriorate, causing a mess in your engine compartment.
BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.
This part fits the following BMW engines:
S54
This part fits the following chassis:
E46, Z3, Z4
The M7 Speed 4% oversize crankshaft pulley is your ticket to unlocking the hidden potential of your MINI Cooper. This performance-enhancing pulley is designed to add power, acceleration, and overall performance to your beloved MINI. Here's how it does the trick:
The M7 Speed 4% Crank Pulley isn't just about performance; it's also a work of art. Crafted with advanced computer modeling and precision CNC machining, it's a blend of form and function:
Use it in conjunction with the M7 Speed 16% Supercharger Technology Pulley for peak performance in MINI tuning.
From the factory, MINI lacks a positive drive key on the crankshaft snout to drive the lower pulley. Most aftermarket pulleys are slip-fit and rely on the bolt to prevent slippage. The M7 Speed crank pulley is engineered differently:
The pulley is interference-fit onto the crankshaft, ensuring zero slippage even at high RPMs.
Proudly made in the USA, the M7 Speed 4% Oversize Crankshaft Pulley is the upgrade your MINI Cooper deserves. Unleash its hidden power and enjoy a new level of performance, reliability, and overall driving pleasure. Get ready to experience the difference.
Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Ferrea springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve springs provide the stability needed for high lift, high rpm racing and street car engines. Kit includes a set of 24 springs. MUST be used with the Ferrea Spring Seat and Titanium Retainers. See links below.
https://www.turnermotorsport.com/e/p-163-e36-325-328-m3-ferrea-spring-seat-set/
https://www.turnermotorsport.com/e/p-31-e36-325-328-m3-ferrea-titanium-retainer-set/
This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
Introducing the complete and easy bolt-in "Exact-Fit" M7 Oil Catch Can kit for the R60/R61 Countryman and Paceman. Designed by M7 Speed, this kit is a perfect fit onto the R60/R61 Mini Cooper platform with no modifications required. Even the hoses are pre-cut and assembled to exact length! The kit includes a stainless steel bracket, stainless steel mounting hardware, and pre-assembled hoses for hassle-free installation—no drilling or special tools needed.
The "Exact-Fit" pre-assembled hoses eliminate the need to cut the factory breather tube, allowing easy restoration to stock configuration when it's time to sell your car.
The M7 Oil Catch Can is not just functional—it's a work of automotive performance art! CNC machined from billet aluminum, it adds a sharp look to your engine compartment.
Why install an M7 oil catch can? The M7 Oil Catch Can protects your MINI Cooper's engine from excessive oil and hydrocarbon buildup, which can lead to performance-hindering oil film and sludge on your intake tract, engine control sensors, and intake valves. With direct injection in 2007 & up MINIs, the intake valves don't get cleaned, leading to oil residue buildup. By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures optimal engine performance.
The kit includes all necessary hoses, brackets, clamps, fittings, and easy-to-follow step-by-step instructions, as well as an oil drain plug and an easy-to-view sight tube. The sight tube lets you monitor the oil level in the can. The hoses are high-quality "Made in the USA" automotive grade, designed to withstand the under-hood environment without degradation.
Don't settle for less—choose M7 Speed products!
Engineered, tested, and proven to PERFORM!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.