If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

The M62tu engine performs in great ways from the factory, offering plenty of power when you need it in the larger luxury chassis. The downside this engine also suffers from the weak vanos seals from the factory that slowly fail often times before even reaching 100K miles. ECS now offers a product line of upgraded seal that will by far outlast the OE seal found even in replacement units. The rebuild of these units is actually an easy job, the hard part on the M62tu is crimping the housing back together, this tool allows for a proper crimping that won't damage other areas of the unit. Some competition says it's ok if the test pins on this unit bend from crimping, this may not be a big deal but the reason we chose to offer the ECS tool was because it's designed to crimp this back together with no damage to the unit.

This item fits the following BMWs: 
1999-2001  E38 BMW  740i 740il 
1999-2003  E39 BMW  540i 
1999-2003  E53 BMW  X5 4.4i X5 4.6is

ECS Tuning presents magnetic drain plugs tailored for your BMW, equipped with a permanently mounted magnet to trap ferrous metal suspended in your oil. These plugs capture tiny particles, typically evading the oil filter, resulting in a cleaner engine. Over time, this saves your bearings and oil pump from unnecessary wear. Crafted from robust 7075-T6 aluminum, the ECS Tuning M12 magnetic drain plug boasts 80% more strength than the common 6061 aluminum.

• Permanently mounted magnet for metal particle trapping
• Cleaner engine and extended bearing life
• 7075-T6 aluminum construction for superior strength
• Captures metal particles from wearing or rebuilt engines
• Ideal for normal wear of reciprocating parts
• Torque to 18ft-lbs using a 17mm socket, like your stock drain plug

Long lasting alternative for sealing plate 11367831906. This sealing flange is located between the VAN0S adjusting unit and the VAN0S solenoid on the S54 engine. It can be the source of oil leaks and should be replaced when the the VAN0S solenoid is.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe (S54)
2006-2008 E85 BMW Z4 M Roadster M Coupe

The turbocharger oil supply line is one of the most common failure points on N14 and N18-equipped R5X MINIs. Responsible for delivering a steady stream of pressurized oil to the turbocharger’s center housing (CHRA), this line keeps the turbo’s bearings properly cooled and lubricated. Unfortunately, its location directly alongside the exhaust manifold and catalytic converter exposes it to extreme heat. Over time, this heat causes the oil inside the line to harden or “coke,” creating a permanent restriction that starves the turbo of vital lubrication.

MINI attempted to address this issue by adding a retrofit heat shield to N14 models, but the problem continues to plague MINI owners. Furthermore, the OEM banjo bolts rely on copper crush washers that become brittle and warp under heat, leading to persistent oil leaks at the back of the engine.

To eliminate these issues, ECS developed a high-performance replacement for the factory turbocharger oil feed line (11657534454). Built from premium stainless steel braided -4 AN hose and engineered to withstand the harsh thermal environment of the N14/N18 engine bay, this upgrade ensures consistent, dependable oil delivery. A PTFE inner lining provides exceptional chemical and temperature resistance, while black zinc–coated fittings and banjo bolts offer improved corrosion protection and long-term sealing. The result is a durable, leak-free solution that outperforms the factory design in every way.

Features:

-4 AN stainless steel braided hose eliminates the OE swivel fittings for superior sealing and consistent oil flow

PTFE inner lining delivers outstanding chemical and temperature resistance

Black-anodized aluminum AN fittings offer improved durability and a refined appearance

Black zinc–coated banjo bolts resist corrosion for a long-lasting repair

Includes four new crush washers to ensure proper sealing during installation

Whether you're fixing an oil leak or performing preventative maintenance, choose the ECS upgraded turbocharger oil feed line for lasting durability and leak-proof performance.

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

• Key Features:
• Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
• Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
• Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
• Serviceable: Easily removable baffle plates and drain plug for cleaning.
• Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
• Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

• Efficient 4-chamber baffle system for maximum oil/air separation
• Recirculated design reduces oil ingestion, promoting cleaner emissions
• Durable 6061-T6 billet machined body with anodized black finish for longevity
• Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
• Serviceable design with removable baffle plates for cleaning
• Easy installation with customizable mounting options and leak-free fittings
• Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Protect your Mini Cooper’s ignition coils and wiring from extreme engine heat with this direct-fit N18 ignition coil heat shield. Made from 18-gauge 304 stainless steel, it offers superior heat resistance, deflecting and dissipating damaging heat to extend the life of your ignition system.

This easy bolt-on upgrade installs using factory mounting points, no cutting or modifications required, and works with both plastic and metal valve covers. Its durable brushed finish provides long-lasting protection while keeping your engine bay looking sharp under high-heat conditions.

Upgrade your Mini’s ignition system today with this premium heat shield, engineered for performance, reliability, and effortless installation.

Design:

18-gauge 304 Stainless Steel
Specifically designed for the N18 engine for maximum coverage and heat shielding
Works with both plastic and metal valve covers
Utilizes the factory mounting stud found on the valve cover and the factory grommet found on the factory engine cover
Includes:

N18 Ignition Coil Heat Shield
Machined Mounting Standoffs
Heat Shield Grommet
Valve Cover Mounting Stud
Complete Installation Hardware
Product Development:
Engineered, tested, and quality inspected in-house by the ECS Tuning Research & Development team. Developed with FARO laser scanning, SolidWorks 3D CAD modeling, rapid prototyping, and rigorous long-term testing to ensure precise fitment, durability, and performance that meet ECS’s exacting standards.

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Includes connector housing with terminals and seals. Commonly used for the pencil-style ignition coil connector.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12527519996 - Commonly used for the pencil-style ignition coil connector.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

ECS Tuning 304 Stainless Steel Hose Clamps

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Made from high-quality 304 stainless steel for durability
• German-style design with T-bolts allows for easy size adjustment
• Various band widths for versatile use
• Avoid dealership pricing without compromising on quality
• Perfect for BMW enthusiasts seeking affordable yet reliable hose clamps

Discover ECS Tuning's stainless steel hose clamps, designed to simplify your Mini's maintenance tasks. No more waiting for dealership orders or overpaying!

These clamps offer versatility with various band widths and German-style T-bolts for size adjustment, ensuring they meet your required diameter. Say goodbye to dealer pricing while securing top-notch quality synonymous with ECS Tuning.

• Stainless steel construction for durability
• Versatile band widths for various applications
• German-style T-bolts for size adjustment
• High-quality alternative to dealership hose clamps

Includes connector housing with terminals and seals. Commonly used for the camshaft position sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521732596 - Commonly used for the camshaft position sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943