BMW Engine Parts

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

T#:567568

Part#: S54VAN

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible

Show More Show Less

AAF Oil Pan Baffle - E9x/E8x 335i/135i

T#:7624643

Part#: 116183

In Stock

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.

Show More Show Less

AAF Oil Pan Baffle - E36/Z3 6Cyl

T#:7593110

Part#: 11636

In Stock

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. 10 gated holes control oil slosh in the sump. A must have for all track cars. **Note: Requires Welding to install. Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars.

Show More Show Less

Ferrea Performance Intake Valve - Stock Size

T#:583445

Part#: F1550P

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Meyle Crankshaft Position Sensor - E36, E39, E46, E53, E60, E83, Z3, ...

We Price Match - Give Us A Call or Chat!

T#:369703

Part#: 12141709616

Ships on Sep 29, 2026

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Does not include O-ring

Ferrea Performance Exhaust Valve - Stock Size

T#:583444

Part#: F1552P

Ships on Sep 1, 2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Beru Glow Plug Preheating Module - E70, E90, F10

T#:584875

Part#: 12218591724

In Stock at Vendor

$ 185.00

This product was last offered at the strikethrough price on
08-13-2026

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Sends power to the glow plugs to preheat them for ignition.

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

AAF M54 Breather Catch Can

T#:7608871

Part#: 116120

Ships in 2 Business Days

$ 195.99 USD

Add to Wish List

Qty

$ 195.99 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. When you’re racing with an M54 and you want to control oil burn, installing an external catch tank is a great way to do it. The stock oil separator allows oil into the intake at sustained high RPM. This causes the intake runners, piping, and throttle body to be contaminated with oil and carbon build up. Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss. Includes all hardware and parts to make installation easy!

Show More Show Less

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Safety Pressure Switch

T#:641428

Part#: 64531386971

Ships in 1 Business Day

$ 41.97

This product was last offered at the strikethrough price on
07-03-2026

$ 38.55 USD

Add to Wish List

Qty

$ 38.55 USD

Add to Wish List

Is your air conditioning system faulting by turning on and off at random, leaving you sweating in the hot summer days? The pressure switch shuts off the A/C compressor if the refrigerant pressure is too low or too high to protect your A/C system components from damage. If the switch is faulty, the A/C compressor will shut off at random intervals, or not turn on at all, without cooling the interior cabin. If this is the case with your A/C system, replace your pressure switch to restore cool air.

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

T#:553839

Part#: PP.S65.V8.B

Ships in 6 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

Rogue Engineering Power Pulley - E46 (Non-M)

T#:554021

Part#: P.E46

Back Ordered

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330

Show More Show Less

AutoTecknic Dry Carbon Charge Cooler Tank Cap Cover - Gloss Finish ...

T#:39971051

Part#: BM-0032

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

ATE Oil Pressure Switch - E23, E24, E28, E31, E32

T#:1195919

Part#: 34351182270

In Stock at Vendor

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Leaking or malfunctioning oil pressure switches can be disastrous

AAF Oil Level Block Off Plate - E30 M20

T#:7608876

Part#: 116205

In Stock

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's M20 oil level block off plate for the E30 eliminates the OEM oil level sensor. On the M20 there is an oil level sensor on the oil pan that can be deleted in dedicated motorsports cars. This will allow you to remove a small bit of weight by getting rid of the oil level sender and associated wiring which goes all the way up to the overhead panel. By deleting the plug what you are also doing is eliminating another point of failure and clutter in the engine bay. Includes: Oil level block off plate Two locking nuts Two washers Shown on pan for reference.

Show More Show Less

Camshaft Position Sensor

We Price Match - Give Us A Call or Chat!

T#:591413

Part#: 12141742185

In Stock at Vendor

$ 108.99

This product was last offered at the strikethrough price on
05-07-2026

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

When this sensor fails, it will become impossible to start your car, leaving you stranded.

Rogue Engineering Power Pulley Set - S54 - E46 M3, Z3/Z4 M

T#:553971

Part#: PP.S54

In Stock

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

AutoTecknic Dry Carbon Fiber Engine Cover - Version 2 - BMW G80 M3, G...

T#:46203538

Part#: ATK-BM-0408-V2

Ships in 7 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Ignition Coil Pack - R50 / R52 / R53

T#:23383348

Part#: 12137510738

In Stock

$ 75.02 USD

Add to Wish List

Qty

$ 75.02 USD

Add to Wish List

Is your Mini experiencing sluggish acceleration or misfires? It might be time to check the coil pack. The coil pack plays a crucial role in the ignition system and can affect engine performance. Replace it as necessary or ideally every 100,000 miles to keep your Mini's ignition system operating smoothly.

Show More Show Less

Meistersatz Valve Cover Gasket - E60, E61, E82, E88, E90, E92, E93, F...

T#:379628

Part#: 11127565286

In Stock

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Addresses valve cover leaks

Active Autowerke Rotrex Traction Fluid - One Liter

T#:397307

Part#: 12-032

Ships in 3 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

Active Autowerke Supercharger Kit - (Rotrex) - E36 M3

T#:340092

Part#: AARSC-E36M3

Ships in 10 Business Days

Starting at $ 8,074.00 USD

Add to Wish List

Starting at $ 8,074.00 USD

Add to Wish List

No one buys an M3 because they like limits. This carefully engineered kit matches the Rotrex C38 supercharger with the perfect hardware, software and tuning to take the factory 240 HP straight up to 360 HP (with the potential for even more power with additional upgrades). Best of all, if your craving for more power is still insatiable, there is a higher upgrade Level 2 featuring more boost and a front mounted air to air intercooler. The Active Autowerke supercharger systrem is truly modular and fully upgradeable. Running on 91-93 octane pump fuel with full emissions system intact, this system has stood the test of real world conditions and delivers thrill-worthy performance on demand while still retaining that BMW feel for a comfortable daily commute.

Show More Show Less

AAF Oil Pan Baffle - E46 M54

T#:7608845

Part#: 11652

In Stock at Vendor

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's own M54 E46 Oil Pan Baffle. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. This baffle keeps the oil at the pick up better than others on the market. This pan features a tight fit with an extra tab on the front to keep oil from exiting under braking. Six gated holes control oil slosh in the sump. A must have for all track cars. Features and Benefits Track-proven to prevent oil starvation Directional trap door baffling completely that closes off the oil pump pickup for maximum protection against oil starvation during turning or acceleration Baffle plate with drain-back slots help accelerate return of oil to the bottom of the sump while also preventing oil slosh and reducing oil consumption Reduces the risk of oil starvation when oil levels are low Works with the factory cast aluminum oil pan, which is considered a structural member of the engine block and is less prone to failure or leaking than aftermarket sheet metal pans Light-weight aluminum construction Made In the USA **Note: Requires welding to install. Photos of installed baffle for reference.

Show More Show Less

AAF Oil Pan Baffle - E9x M3

T#:7624656

Part#: 116184

Ships in 3 Business Days

$ 230.00 USD

Add to Wish List

Qty

$ 230.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.

Show More Show Less

AAF M20 Oil Pan Baffle (BAFFLE ONLY) - E30

T#:7593089

Part#: 11619

In Stock at Vendor

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. Ten gated holes control oil slosh in the sump. A must have for all track cars. **Note: welding is required to install. Photos of installed baffle for reference.

Show More Show Less

328i Supercharger kit level 1 - E36 328i, 328ci

T#:397235

Part#: 12-001

Ships in 10 Business Days

5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.99 USD

Add to Wish List

Qty

5% off MSRP

$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. For over three decades, only one name has remained at the top of the BMW performance parts industry and Active Autowerke have built a lasting reputation as leaders in custom BMW tuning and accessories.

This supercharger kit will produce 310 horsepower and 300 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit. Additionally, this kit can be expanded to deliver even more horsepower with a few simple modifications.

Key Features

Rotrex C38-81 Supercharger
Mounting bracket, pulleys and belt
6 larger high-flow fuel injectors
Active Autowerke Air Filter
Active Autowerke Dyno-Tuned Software
All mounting hardware, plumbing, hoses and clamps
Illustrated instruction manual & installation guide
2 Year Warranty with free tech support

Performance Specs

Power : 310 BHP @ 6900 rpm
Torque : 300 ft-lbs @ 5700 rpm
Boost Level : 7.0 psi

This part fits the following BMWs:
1992-1999 E36 328i 328is

Show More Show Less

Supercharger Kit - Level 1 (OBD2) - Rotrex C38 - E36 M3 S52 OBD2 ...

T#:397239

Part#: 12-003

Ships in 10 Business Days

5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD

Add to Wish List

Qty

5% off MSRP

$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD

Add to Wish List

360HP/300TQ - a complete power solution for your M3!

Active Autowerke Level 1 Supercharger Kit - E46 M3 (6 Speed Transmiss...

For vehicles with 6 speed transmissions

T#:397296

Part#: 12-023

Ships in 10 Business Days

5% off MSRP $ 11,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10,686.99 USD

Add to Wish List

Qty

5% off MSRP

$ 11,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10,686.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 525 horsepower and 335 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Kit features:

Rotrex 92 trim supercharger running 7 PSI of boost
Supercharger bracket, pulleys, & belt
Self-contained oiling system with front-mount oil cooler
6 high-flow fuel injectors
Colder heat range spark plugs
Active Autowerke Generation 7 intake manifold with dual bypass valve
Front mount air-to-air intercooler
Active Autowerke air filter
Active Autowerke dyno-tuned software
All mounting hardware, plumbing, hoses, & clamps
Illustrated instruction manual & installation guide
2 year warranty with free tech support

Performance Specs:

Power : 525 BHP @ 7650 rpm
Torque : 335 ft/lbs @ 5400 rpm
Boost Level : 7-8 psi

Show More Show Less

AAF Oil Pressure Sensor Relocate Kit - M20

T#:7593105

Part#: 116177

Ships in 3 Business Days

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's Oil Pressure Sensor Relocation Kit allows for an aftermarket low pressure switch as well as oil pressure sensor, or two 1/8' NPT pressure sensors to be installed. This can allow a gauge or light to be on the dash and still log oil pressure in a data logger. This kit also moves the oil pressure sensor away from the engine and onto the chassis (or any other spot) where is it much easier to access, or install larger size diameter sensors. Fits all M20 Engines. Features: 4AN Stainless Steel Braided Line Banjo Bolt and Fitting (installs onto block) 3 Way 1/8' NPT Tee Fitting, for hose from block and 2 sensors. Note: This kit does not come with sensors – the factory low pressure switch can NOT be used. An aftermarket 1/8″ NPT low pressure switch can be used with the factory wire.

Show More Show Less

Active Autowerke Supercharger Kit - Level 3 - E36 M3

T#:28504210

Part#: 12-005

Ships in 6 Business Days

5% off MSRP $ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD

Add to Wish List

Qty

5% off MSRP

$ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD

Add to Wish List

Active Autowerke, established in 1981, has become a highly regarded name in the BMW community, known for their top-notch power solutions for various BMW models. This supercharger kit they offer packs a punch, capable of generating over 400 horsepower for your BMW while ensuring the vehicle's structural integrity and suitability for daily driving. What sets this kit apart is the Rotrex supercharger's design, featuring a traction drive system that eliminates the lag commonly associated with other centrifugal superchargers. This results in a smooth and reliable power delivery experience.

Key components of the kit include the Rotrex C38-92 trim supercharger, an Active Autowerke front-mount air-to-air intercooler, a high-flow fuel pump, supercharger brackets, pulleys, and belts, six high-flow fuel injectors, an Active Autowerke air filter, dyno-tuned software, and all necessary mounting hardware, plumbing, hoses, and clamps. Additionally, the kit comes with an illustrated instruction manual and installation guide, ensuring a straightforward installation process. Active Autowerke also offers a 2-year warranty along with free technical support for added peace of mind.

Show More Show Less

Active Autowerke Supercharger Kit - E9X M3 2008-2013

T#:340094

Part#: AASC-E9XM3

Ships in 10 Business Days

Starting at $ 9,995.00 USD

Add to Wish List

Starting at $ 9,995.00 USD

Add to Wish List

The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.

Show More Show Less

Ferrea High Performance Valve Kit - Standard Size

T#:28770000

Part#: FER-HPVK-N20-T

Ships in 3 Business Days

$ 619.99 USD

Add to Wish List

Qty

$ 619.99 USD

Add to Wish List

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

T#:553840

Part#: PP.S65.V8.A

Ships in 8 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

AAF Jump Post Relocation Bracket - E46

T#:7608844

Part#: 11648

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. The AAF E46 Jump Post Relocation Bracket makes it easy to adjust camber/caster on your race car by getting the factory jump post out of the way! In race car applications, the desired camber and caster settings can cause the strut tops and shock adjusters to interfere with the factory jump post. This kit takes just a few minutes to install and makes using strut braces and adjusting camber plates just that much safer and faster.

Show More Show Less

ATE Oil Pressure Switch - E23, E24, E28, E31, E32

T#:1195880

Part#: 34331150922

Ships in 4 Business Days

$ 147.43 USD

Add to Wish List

Qty

$ 147.43 USD

Add to Wish List

Leaking or malfunctioning oil pressure switches can be disastrous

Knock Sensor

We Price Match - Give Us A Call or Chat!

T#:35964551

Part#: 13627568422

Back Ordered

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

This sensor detects engine knocking or pinging and adjusts the timing to ensure optimal engine performance and efficiency.

Rogue Engineering Racing Power Pulley Set - S54 - E46 M3, Z3/Z4 M ...

T#:553959

Part#: PP.S54.RACE

Ships in 9 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

Upper Engine Mount

We Price Match - Give Us A Call or Chat!

T#:31125660

Part#: 22116778610

Ships on Dec 24, 2026

$ 76.99 USD

Add to Wish List

Qty

$ 76.99 USD

Add to Wish List

Rear Bank 2 Post-Cat Oxygen Sensor - 490mm - E70 E83 E82/88 E9X (N5X ...

We Price Match - Give Us A Call or Chat!

T#:4934915

Part#: 3148030031

Ships on Dec 24, 2026

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.

Show More Show Less

Hydraulic Alternator Belt Tensioner Roller

We Price Match - Give Us A Call or Chat!

T#:594521

Part#: 11281748131

Ships on Dec 24, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Replacement is recommend with every belt service

Meyle Engine Mount - E36, E46, Z4

We Price Match - Give Us A Call or Chat!

T#:374232

Part#: 22116779970

Back Ordered

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Works on both the driver & passenger side

Meyle - Oxygen Sensor - Bank 2, Pre-Cat - E82, E88, E9x, Z4 ...

T#:40512028

Part#: 11787558087

Ships on Dec 24, 2026

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Backed by Meyle’s high manufacturing standards for durability and reliability

Meyle Crankshaft Position Sensor - M60

We Price Match - Give Us A Call or Chat!

T#:5958675

Part#: 12141731887

Ships on Dec 24, 2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. The crankshaft position sensor measures the speed at which the crank is turning and adjusts fueling via the ECU to match. If it fails, your computer will not know the speed and will fuel it improperly. Installs exactly in the place of your old sensor and will eliminate your car's idle, performance, and misfiring problems.

Show More Show Less

E36 325, 328 M3 Ferrea Spring Seat Set

T#:163

Part#: SL1021-24

Back Ordered

$ 118.80 USD

Add to Wish List

Qty

$ 118.80 USD

Add to Wish List

E36 325, 328 M3 Ferrea Spring Seat Set includes 24 seats. MUST be uses with the Ferrea valve springs. Recommended to be used with the Ferrea Competition Plus Big Valves and Ferrea Titanium Retainers. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

E36 325, 328 M3 Ferrea Titanium Retainer Set

T#:31

Part#: E11025-24

Back Ordered

$ 7,199.76 USD

Add to Wish List

Qty

$ 7,199.76 USD

Add to Wish List

E36 325, 328 M3 Ferrea Titanium Retainer Set - set of 24. Recommended to be used with the Ferrea Competition Plus Big Valves. MUST be used with the Ferrea high-performance valve spring and seat kit. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel, Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

Spark Plugs - Set Of Six

T#:14982199

Part#: 121200405516KT

Back Ordered

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

OEM BMW Engine Profile Gasket 11121721876

T#:6594

Part#: 11121721876

Ships in 3 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

OEM BMW ENGINE PROFILE-GASKET 11121721876.--

This item fits the following BMWs:
BMW 3 Series - 318i, 318i Convertible, 318is, 318ti
BMW Z Series - Z3 1.9

--.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results