BMW Engine Parts

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent.  The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories.  These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330

Crafted from machined 6061 billet aluminum, the ALTA Performance Pulley Removal Tool is specifically designed for the non-JCW MINI Cooper S, offering a convenient way to enhance power quickly and effortlessly, whether you're in a workshop or your backyard. This versatile tool ensures durability and can be utilized repeatedly with proper usage, maintenance, and care. An essential addition for MINI specialty shops, this tool is compatible with all OEM-sized pulleys, except for JCW variants. Note: A steering wheel puller is necessary for the removal of the stock supercharger pulley.

• Crafted from machined 6061 billet aluminum
• Designed for non-JCW MINI Cooper S
• Durable for repeated use with proper care
• Ideal for MINI specialty shops
• Compatible with all OEM-sized pulleys (excluding JCW)

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles

BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles

BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee

This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xiThis item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. For over three decades, only one name has remained at the top of the BMW performance parts industry and Active Autowerke have built a lasting reputation as leaders in custom BMW tuning and accessories.

This supercharger kit will produce 310 horsepower and 300 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit. Additionally, this kit can be expanded to deliver even more horsepower with a few simple modifications. 

Key Features

• Rotrex C38-81 Supercharger
• Mounting bracket, pulleys and belt
• 6 larger high-flow fuel injectors
• Active Autowerke Air Filter
• Active Autowerke Dyno-Tuned Software
• All mounting hardware, plumbing, hoses and clamps
• Illustrated instruction manual & installation guide
• 2 Year Warranty with free tech support

Performance Specs

Power              :      310 BHP @ 6900 rpm
Torque             :      300 ft-lbs @ 5700 rpm
Boost Level      :      7.0 psi

This part fits the following BMWs:
1992-1999 E36 328i 328is 

Active Autowerke, established in 1981, has become a highly regarded name in the BMW community, known for their top-notch power solutions for various BMW models. This supercharger kit they offer packs a punch, capable of generating over 400 horsepower for your BMW while ensuring the vehicle's structural integrity and suitability for daily driving. What sets this kit apart is the Rotrex supercharger's design, featuring a traction drive system that eliminates the lag commonly associated with other centrifugal superchargers. This results in a smooth and reliable power delivery experience.

Key components of the kit include the Rotrex C38-92 trim supercharger, an Active Autowerke front-mount air-to-air intercooler, a high-flow fuel pump, supercharger brackets, pulleys, and belts, six high-flow fuel injectors, an Active Autowerke air filter, dyno-tuned software, and all necessary mounting hardware, plumbing, hoses, and clamps. Additionally, the kit comes with an illustrated instruction manual and installation guide, ensuring a straightforward installation process. Active Autowerke also offers a 2-year warranty along with free technical support for added peace of mind.

Crafted from lightweight 6061T6 aluminum, the ALTA SC pulley body reduces the supercharger's rotational inertia, significantly enhancing your Mini's engine responsiveness. This innovative pulley design integrates cross-drilled holes to amplify belt grip and mitigate belt slippage, especially during belt stretching. Furthermore, it incorporates oversized belt retainers to prevent belts from jumping off. Available in two sizes—15% and 17% reductions—the 15% reduction option, a market standard, delivers safe power gains of around 20WHP, ensuring a smoother and enhanced performance.

Benefits:

• Enhanced engine responsiveness
• Improved belt grip and reduced slippage
• Safe power increase of around 20WHP (15% reduction)