Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Glyco - Corporate Logo
T#:375825
Part#: 11241284849
Ships in 1 Business Day
$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 84.38 USD
Free Shipping on orders $49 and up
$ 84.38 USD
Free Shipping on orders $49 and up
Standard bore - 45mm
Glyco - Corporate Logo
T#:183
Part#: 11241310515
In Stock
$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.
Show More Show Less
Glyco - Corporate Logo
T#:375823
Part#: 11211706847
In Stock
$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD
Free Shipping
$ 125.04 USD
Free Shipping
Standard bore

AFE - Corporate Logo
T#:48401495
Part#: 77-92013-MC
In Stock
$ 262.00 USD
Free Shipping on orders $49 and up
$ 262.00 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.
Show More Show Less

AFE - Corporate Logo
T#:28171498
Part#: 77-92001-MC
In Stock
$ 262.00 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life
Show More Show Less
Active Autowerke Power Pulley Kit - E9x M3
For vehicles with production date 2007-5/2008
Active Autowerke - Corporate Logo
T#:397285
Part#: 13-001
Ships in 3 Business Days
5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
5% off MSRP
$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

Glyco - Corporate Logo
T#:3166
Part#: 11210666110
Ships in 3 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3
Show More Show Less

AFE - Corporate Logo
T#:28171497
Part#: 77-92001
Ships in 3 Business Days
$ 52.00 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:46203538
Part#: ATK-BM-0408-V2
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less


Glyco Main Bearing Set (Standard) - E21, E28, E30
Features All Single-Tang Main Bearings for Earlier M20 Engines
Glyco - Corporate Logo
T#:1196183
Part#: 11211722342
In Stock
$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD
Free Shipping
$ 231.99 USD
Free Shipping
Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs
Glyco - Corporate Logo
T#:375824
Part#: 11211706850
In Stock at Vendor
$ 126.61

This product was last offered at the strikethrough price on
07-15-2026

$ 118.92 USD
Free Shipping
$ 118.92 USD
Free Shipping
59.75MM(+0.25) bore

AFE - Corporate Logo
T#:557623
Part#: 44-LF029-MB
Ships in 3 Business Days
$ 54.00 USD
Free Shipping on orders $49 and up

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 3 Business Days
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less
AFE - Corporate Logo
T#:557622
Part#: 44-LF022-MB
In Stock
$ 54.00 USD
Free Shipping on orders $49 and up
Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397235
Part#: 12-001
Ships in 10 Business Days
5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.99 USD
Free Shipping
5% off MSRP
$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.99 USD
Free Shipping

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. For over three decades, only one name has remained at the top of the BMW performance parts industry and Active Autowerke have built a lasting reputation as leaders in custom BMW tuning and accessories.

This supercharger kit will produce 310 horsepower and 300 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit. Additionally, this kit can be expanded to deliver even more horsepower with a few simple modifications. 


Key Features

  • Rotrex C38-81 Supercharger
  • Mounting bracket, pulleys and belt
  • 6 larger high-flow fuel injectors
  • Active Autowerke Air Filter
  • Active Autowerke Dyno-Tuned Software
  • All mounting hardware, plumbing, hoses and clamps
  • Illustrated instruction manual & installation guide
  • 2 Year Warranty with free tech support


Performance Specs

Power              :      310 BHP @ 6900 rpm
Torque             :      300 ft-lbs @ 5700 rpm
Boost Level      :      7.0 psi

This part fits the following BMWs:
1992-1999 E36 328i 328is 

Show More Show Less
Active Autowerke - Corporate Logo
T#:397239
Part#: 12-003
Ships in 10 Business Days
5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD
Free Shipping
5% off MSRP
$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD
Free Shipping
360HP/300TQ - a complete power solution for your M3!

Active Autowerke - Corporate Logo
T#:340092
Part#: AARSC-E36M3
Ships in 10 Business Days
Starting at $ 8,074.00 USD
Free Shipping
Starting at $ 8,074.00 USD
Free Shipping
No one buys an M3 because they like limits. This carefully engineered kit matches the Rotrex C38 supercharger with the perfect hardware, software and tuning to take the factory 240 HP straight up to 360 HP (with the potential for even more power with additional upgrades). Best of all, if your craving for more power is still insatiable, there is a higher upgrade Level 2 featuring more boost and a front mounted air to air intercooler. The Active Autowerke supercharger systrem is truly modular and fully upgradeable. Running on 91-93 octane pump fuel with full emissions system intact, this system has stood the test of real world conditions and delivers thrill-worthy performance on demand while still retaining that BMW feel for a comfortable daily commute.
Show More Show Less

Active Autowerke - Corporate Logo
T#:28504210
Part#: 12-005
Ships in 3 Business Days
5% off MSRP $ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD
Free Shipping
5% off MSRP
$ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD
Free Shipping

Active Autowerke, established in 1981, has become a highly regarded name in the BMW community, known for their top-notch power solutions for various BMW models. This supercharger kit they offer packs a punch, capable of generating over 400 horsepower for your BMW while ensuring the vehicle's structural integrity and suitability for daily driving. What sets this kit apart is the Rotrex supercharger's design, featuring a traction drive system that eliminates the lag commonly associated with other centrifugal superchargers. This results in a smooth and reliable power delivery experience.

Key components of the kit include the Rotrex C38-92 trim supercharger, an Active Autowerke front-mount air-to-air intercooler, a high-flow fuel pump, supercharger brackets, pulleys, and belts, six high-flow fuel injectors, an Active Autowerke air filter, dyno-tuned software, and all necessary mounting hardware, plumbing, hoses, and clamps. Additionally, the kit comes with an illustrated instruction manual and installation guide, ensuring a straightforward installation process. Active Autowerke also offers a 2-year warranty along with free technical support for added peace of mind.

Show More Show Less
Active Autowerke - Corporate Logo
T#:397296
Part#: 12-023
Ships in 10 Business Days
5% off MSRP $ 11,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10,686.99 USD
Free Shipping
5% off MSRP
$ 11,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10,686.99 USD
Free Shipping

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 525 horsepower and 335 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Kit features:

  • Rotrex 92 trim supercharger running 7 PSI of boost
  • Supercharger bracket, pulleys, & belt
  • Self-contained oiling system with front-mount oil cooler
  • 6 high-flow fuel injectors
  • Colder heat range spark plugs
  • Active Autowerke  Generation 7 intake manifold with dual bypass valve
  • Front mount air-to-air intercooler
  • Active Autowerke air filter
  • Active Autowerke dyno-tuned software
  • All mounting hardware, plumbing, hoses, & clamps
  • Illustrated instruction manual & installation guide
  • 2 year warranty with free tech support

Performance Specs:

  • Power   :   525 BHP @ 7650 rpm
  • Torque   :   335 ft/lbs @ 5400 rpm
  • Boost Level   :   7-8 psi
Show More Show Less
Active Autowerke - Corporate Logo
T#:340094
Part#: AASC-E9XM3
Ships in 10 Business Days
Starting at $ 9,995.00 USD
Starting at $ 9,995.00 USD
The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.
Show More Show Less


Glyco - Corporate Logo
T#:23748157
Part#: 112412848516CYL-
Ships in 1 Business Day
$ 331.13

This product was last offered at the strikethrough price on
07-15-2026

$ 305.57 USD
Free Shipping on orders $49 and up
$ 305.57 USD
Free Shipping on orders $49 and up
Glyco - Corporate Logo
T#:374671
Part#: 11211706848
Ships in 1-2 days
$ 194.32 USD
Free Shipping
$ 194.32 USD
Free Shipping
Standard bore
AFE - Corporate Logo
T#:394579
Part#: 44-LF029
Ships in 3 Business Days
$ 16.00 USD
Free Shipping on orders $49 and up

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Active Autowerke - Corporate Logo
T#:340093
Part#: AASC-E46M3
Ships in 10 Business Days
Starting at $ 7,995.00 USD
Starting at $ 7,995.00 USD
Race on Sunday, to sell on Monday. This old saying is indicative of the new Generation 8 supercharger system for the E46 M3. Through countless hours of testing, it has often been quoted that the true test has always been a race environment. What better venue than Brock Yates One Lap of America Race. With a rigorous 7,000 miles to be covered within a week, and to compete against the likes of Porsches, Corvettes, Nissan GTRs, this would be the testing grounds for the new Generation Active Autowerke Supercharger system. The Active Autowerke Generation 8 Supercharger System not only proved its worth by being the highest ranked BMW within the field, but also ranked 1st in its class..

The data and technology that made this winning combination is now being applied in the new Generation 8 of the Active Autowerke supercharged E46 M3 level 1. Reliability and power is needed if you want to be on the podium, and this new Generation 8 will deliver exactly that. Consistent, repeatable runs of over 415 WHP (525 engine horsepower) were also recorded on the Active Autowerke chassis dyno in hot 94 + degree Fahrenheit conditions with humidity in the 60% + range. These run conditions might be considered a deterrent and not really suited, but it is better knowing the horsepower numbers are under such conditions, since higher horsepower numbers will only increase as the temperature falls and the air becomes more dense.

Stage 1 Performance Specs:
Power : 525 BHP @ 7650 rpm
Torque : 335 ft/lbs @ 5400 rpm
Boost Level : 7-8 psi

Key Features:
  • Rotrex 92 Trim Supercharger
  • Active Autowerke Gen 7 Intake Manifold w/ Dual By Pass Valve
  • Front Mount Air to Air Intercooler
  • Turbo like speed with linear power delivery
  • Large Fuel Injectors
  • Supercharger Oil Cooler
  • Colder Heat Range Spark Plugs
  • High Performance AA Spec Green Filter
  • Active Autowerke High Performance Software
  • All Mounting Hardware, plumbing, hoses and clamps
  • Proven Horsepower gains even under extreme conditions
  • Installation Instructions included
  • 2 Year Limited Warranty
    Want even more power? Upgrade to the Stage 2 kit with Larger Intercooler & Fuel System.
    The stage 2 System boosts the S54's power output to over 600BHP and includes an upgraded fuel system (includes two fuel pumps, fuel filter, all new -6 lines, fuel pressure regulator, dead end fuel rail, upgraded injectors and all required fittings). This ugpraded fuel system is a must once reaching these increased boost levels due to the fact that the factory fuel system is simply inadequate at this level. The stage 2 system also use a larger front mount air to air intercooler and the Active Autowerke custom methanol injection system. NOTE: Level 2 supercharger system is designed and engineered to operate in conjunction with the Active Autowerke Water/Methanol system as an integral part of the kit. Reasons to incapacitate, isolate, turn off, or not installing this system can and will void all warranty and related claims associated to the proper function of the specified Active Autowerke supercharger system.

    Stage 2 Performance Specs:
    Power � : � 605 BHP @ 7000 rpm
    Torque � : � 395 ft/lbs @ 5400 rpm
    Boost Level � : � 11-12 psi

    Custom built to order. Please allow 2-3 weeks for delivery.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3, M3 Convertible
  • Show More Show Less

    AFE - Corporate Logo
    T#:48401494
    Part#: 77-92013
    Ships in 3 Business Days
    $ 52.00 USD
    Free Shipping on orders $49 and up
    $ 52.00 USD
    Free Shipping on orders $49 and up
    Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.
    Show More Show Less
    AUTOTECKNIC - Corporate Logo
    T#:39329329
    Part#: BM-0420-G
    Ships in 7 Business Days
    $ 495.00 USD
    Free Shipping on orders $49 and up
    Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover – the ultimate choice for discerning enthusiasts.

    AUTOTECKNIC - Corporate Logo
    T#:39329331
    Part#: BM-0420-S
    Ships in 7 Business Days
    $ 495.00 USD
    Free Shipping on orders $49 and up
    Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover (Satin Finish) – the ultimate choice for discerning enthusiasts.
    AFE - Corporate Logo
    T#:382305
    Part#: 79-10003
    Ships in 3 Business Days
    20% off MSRP $ 621.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 497.00 USD
    Free Shipping
    20% off MSRP
    $ 621.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 497.00 USD
    Free Shipping

    aFe Power's new power pulley brings performance engineering to your BMW M5. This power pulley is a complete bolt-on kit, including the pulley, bolts, and belts. aFe’s power pulleys are CNC machined out of billet aluminum and black anodized for that aggressive look under the M5’s hood. This power pulley does not modify factory harmonics or dampening. In recent Dyno testing this power pulley produced 5 HP and 6lbs. x ft. torque. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice. 

    This part fits the following BMWs:
    2006 - 2010 E60 M5 

    Show More Show Less

    AFE - Corporate Logo
    T#:30164620
    Part#: 46-60222
    Ships in 3 Business Days
    $ 1,684.00 USD
    Free Shipping on orders $49 and up

    Enhance the performance of your MINI with the BladeRunner GT Series Turbocharger designed for the MINI N14 and N18 engines. This turbocharger from BladeRunner offers significant improvements in power and reliability, making it an ideal choice for enthusiasts seeking enhanced performance without compromising on durability.

    • Increased horsepower and torque output.
    • Improved turbo response and throttle response.
    • Enhanced durability and reliability.
    • Direct-fit replacement for easy installation.

    Upgrade your MINI N14 or N18 engine with the BladeRunner GT Series Turbocharger and experience a new level of performance.

    Show More Show Less

    AUTOTECKNIC - Corporate Logo
    T#:39329307
    Part#: BM-0388-DCG
    Ships in 7 Business Days
    $ 650.00 USD
    Free Shipping on orders $49 and up
    Perfect for BMW G80 M3 and G82/G83 M4 owners seeking a refined and aggressive engine bay upgrade, the AutoTecknic Dry Carbon V2 Engine Bay Trim Set delivers a flawless combination of style, durability, and performance.
    Show More Show Less
    AFE - Corporate Logo
    T#:211085
    Part#: 79-13003
    Ships in 3 Business Days
    20% off MSRP $ 598.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 479.00 USD
    Free Shipping on orders $49 and up
    20% off MSRP
    $ 598.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 479.00 USD
    Free Shipping on orders $49 and up
    Looking to put some style under the hood of your BMW M2 Competition/M3/M4? aFe's hand-crafted, dry carbon fiber engine cover will set you apart from the rest. It is no shock that this race-inspired material is a favorite of BMW drivers from around the world. This cover features 2x2 twill weave carbon fiber with a matte finish, while the underside has been smoothed to ensure a high-quality all-around finish. Hassle-free Installation: Reuses OE factory grommets for an easy install.
    Show More Show Less


    Glyco - Corporate Logo
    T#:374292
    Part#: 11241278209
    Ships in 1 Business Day
    $ 6.11 USD
    Free Shipping on orders $49 and up
    Press fit into small journal of connecting rod
    Glyco - Corporate Logo
    T#:187165
    Part#: 11240618100
    In Stock at Vendor
    $ 12.99 USD
    Free Shipping on orders $49 and up
    OEM BMW Connecting Rod Bush
    AUTOTECKNIC - Corporate Logo
    T#:39295568
    Part#: BM-0385
    Ships in 7 Business Days
    $ 495.00 USD
    Free Shipping on orders $49 and up
    Designed for BMW F95 X5M and F96 X6M owners seeking an elevated under-hood appearance, the AutoTecknic Dry Carbon Engine Cover delivers premium styling and race-inspired refinement.

    AUTOTECKNIC - Corporate Logo
    T#:21045518
    Part#: ATK-BM-0006-BC
    Ships in 7 Business Days
    $ 65.00 USD
    Free Shipping on orders $49 and up
    Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!
    Show More Show Less

    AFE - Corporate Logo
    T#:372894
    Part#: 44-LF022
    In Stock
    $ 16.00 USD
    Free Shipping
    $ 16.00 USD
    Free Shipping

    Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

      Show More Show Less
      Active Autowerke - Corporate Logo
      T#:397236
      Part#: 12-002
      Ships in 10 Business Days
      $ 11,019.00 USD
      Free Shipping
      $ 11,019.00 USD
      Free Shipping

      Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. For over three decades, only one name has remained at the top of the BMW performance parts industry and Active Autowerke have built a lasting reputation as leaders in custom BMW tuning and accessories.

      Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 360+ horsepower and 300 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

      The level 2 version of this BMW 328i Supercharger system brings you car to another level, boasting a large front mount air to air intercooler and comes complete with all piping and hardware required to make this bolt on application work. This upgrade increases your car HP an additional 25-40HP over the stage 1 system. The stage 2 upgrade also includes an new high performance fuel pump to help deliver the necessary fuel. With the reliability and performance of an inter-cooled system along with our perfectly tuned software this system is a must for the true enthusiast looking to bring their 328i to new heights.

      Kit features:

      • Rotrex C38-81 trim supercharger running 7 PSI of boost
      • Active Autowerke front-mount air to air intercooler
      • High-flow fuel pump
      • Supercharger bracket, pulleys, & belt
      • 6 high-flow fuel injectors
      • Active Autowerke air filter
      • Active Autowerke dyno-tuned software
      • All mounting hardware, plumbing, hoses, & clamps
      • Illustrated instruction manual & installation guide
      • 2 year warranty with free tech support

      This part fits the following BMWs:
      1992-1999 E36 328i 328is 

      Show More Show Less

      AFE - Corporate Logo
      T#:372901
      Part#: 79-10001
      Ships in 3 Business Days
      20% off MSRP $ 585.00

      MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

      $ 468.00 USD
      Free Shipping on orders $49 and up
      20% off MSRP
      $ 585.00

      MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

      $ 468.00 USD
      Free Shipping on orders $49 and up
      aFe Power's new power pulley brings performance engineering to your BMW M3. This power pulley is a complete bolt-on kit, including the pulley, bolts, and belts. aFe's power pulleys are CNC machined out of billet aluminum and black anodized for that aggressive look under the M3's hood. This power pulley does not modify factory harmonics or dampening. In recent Dyno testing this power pulley produced 10 HP and 7lbs. x ft. torque. aFe's power pulley fits up to production date May 2008. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.
      Show More Show Less
      AUTOTECKNIC - Corporate Logo
      T#:39497962
      Part#: BM-0707
      Ships in 7 Business Days
      $ 549.99 USD
      Free Shipping on orders $49 and up
      Turner Motorsport offers this high-quality AutoTecknic Pre-Preg Carbon Engine Cover, ensuring BMW X3M and X4M owners can upgrade their vehicle with a refined, performance-oriented aesthetic.

      AUTOTECKNIC - Corporate Logo
      T#:21209809
      Part#: ATK-BM-0008-G42-
      Ships in 7 Business Days
      $ 65.00 USD
      Free Shipping on orders $49 and up
      Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!
      Show More Show Less

      Active Autowerke - Corporate Logo
      T#:397295
      Part#: 12-021
      Ships in 10 Business Days
      5% off MSRP $ 9,375.00

      MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

      $ 8,906.99 USD
      Free Shipping
      5% off MSRP
      $ 9,375.00

      MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

      $ 8,906.99 USD
      Free Shipping

      Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 425 horsepower and 295 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit. best of all, when you crave more power, this kit is fully upgradeable to Level 1 and Level 2 specs.

      Kit features:

      • Rotrex C38-92 trim supercharger running 5.8 PSI of boost
      • Active Autowerke GEN 7 intake manifold
      • Active Autowere dual blow-off valve setup
      • Active Autowerke Air Filter
      • Alpha N software tune w/ SIMON2 interface
      • 6 high-flow fuel injectors
      • Dedicated oil cooling system
      • All mounting hardware, plumbing, hoses, & clamps
      • Illustrated instruction manual & installation guide
      • 2 year warranty with free tech support

      Base Prima supercharger Dynojet results:
      Boost: 5.8 psi
      Stock Horsepower:  285.4 WHP @ 7500 RPM
      Stock Torque: 232.36 LB-FT @ 5250 RPM
      Supercharged Horsepower: 426.69 WHP @ 8150 RPM
      Supercharged Torque: 297.99 LB-FT @ 7200 RPM

      Show More Show Less
      AUTOTECKNIC - Corporate Logo
      T#:396229
      Part#: BM-0401
      Ships in 7 Business Days
      $ 549.99 USD
      Free Shipping on orders $49 and up
      Don't let your engine bay bore you. A carbon fiber engine cover makes your bay adds a sporty look instantly. We use vacuum technology to ensure every engine cover fits just like OEM. Uses rubber mounts from factory engine cover.
      Show More Show Less
      AUTOTECKNIC - Corporate Logo
      T#:21045545
      Part#: ATK-BM-0408-G87
      Ships in 7 Business Days
      $ 795.00 USD
      Free Shipping on orders $49 and up
      AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could achieve.
      Show More Show Less


      AUTOTECKNIC - Corporate Logo
      T#:5189192
      Part#: TO-0407
      Ships in 7 Business Days
      $ 550.00 USD
      Free Shipping on orders $49 and up
      AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could. achieve. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
      Show More Show Less
      AUTOTECKNIC - Corporate Logo
      T#:21275553
      Part#: ATK-TO-0407
      Ships in 7 Business Days
      $ 550.00 USD
      Free Shipping on orders $49 and up
      Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Stand out from the rest when you open your hood with this full carbon fiber engine cover for the A90 Supra! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.
      Show More Show Less