BMW Engine Parts

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent.  The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories.  These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent.  The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories.  These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Enhance the performance of your Mini with the ALTA Lightened Crank Pulley (LCP), engineered to increase horsepower and torque. Available in 0% Stock Sized and +2% Oversized options, this pulley is crafted from 6061T6 aluminum, weighing only 0.65 lbs. Significantly lighter than the stock crank pulley, the ALTA LCP ensures improved engine efficiency without adding vibration or noise. The +2% Oversized pulley provides additional boost for Supercharged Cooper S models, delivering safe and reliable performance. With increased belt contact, this pulley reduces wear and enhances durability, making it a must-have upgrade for Mini enthusiasts.

• Increases horsepower and torque
• Lightweight 6061T6 aluminum construction
• Available in 0% Stock Sized and +2% Oversized options
• Does not affect charging system
• Improves engine efficiency and performance

Crafted from machined 6061 billet aluminum, the ALTA Performance Pulley Removal Tool is specifically designed for the non-JCW MINI Cooper S, offering a convenient way to enhance power quickly and effortlessly, whether you're in a workshop or your backyard. This versatile tool ensures durability and can be utilized repeatedly with proper usage, maintenance, and care. An essential addition for MINI specialty shops, this tool is compatible with all OEM-sized pulleys, except for JCW variants. Note: A steering wheel puller is necessary for the removal of the stock supercharger pulley.

• Crafted from machined 6061 billet aluminum
• Designed for non-JCW MINI Cooper S
• Durable for repeated use with proper care
• Ideal for MINI specialty shops
• Compatible with all OEM-sized pulleys (excluding JCW)

Enhance your Mini's performance with the ALTA Supercharger Pulley, crafted from lightweight 6061T6 aluminum. This pulley reduces the rotational inertia of the supercharger, significantly enhancing engine responsiveness. Featuring cross-drilled holes over each groove, it improves belt grip and minimizes belt slippage as the belt stretches. Additionally, oversized belt retainers prevent belt jumping.

ALTA offers two reduction sizes: 15% and 17%, each providing distinct benefits.

• 15% Reduction: The standard choice in the market, delivering smooth power increases of approximately 20WHP for safe performance enhancements.
• 17% Reduction: Ideal for those seeking more power, this option builds boost at lower RPMs, providing additional power where needed. It delivers an extra 1.5psi of boost at redline, ensuring added horsepower to conquer challenging situations.

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

• SAE J30R10 E85 compatible fuel line
• 14ga fuel resistant wiring harness
• Quick connect female bullet connectors (2)
• Vent tube replacement clip
• Nylon cable ties (10)
• Stainless steel lock nuts (2)
• 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
• Pushlock pump retention fittings (2)
• 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

  *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

  ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

• Trade-in:
  • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.
• New Build:
  • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

Both options include the following:

• A complete plug and play solution by simply replacing your stock bucket
• A new E85 compatible Walbro 450 pump
• A new Walbro filter
• A custom fitting that is tuned to optimize the venturi and pump output
• Spare vent tube clip
• Flow testing prior to shipping
• Recommended accessories:
  • Lock Ring Removal Tool 

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

BMW F8X S55 Flex Fuel Kit | Fuel-It! from Turner Motorsport is essential for those running E85 or ethanol blends in their BMW. This comprehensive kit offers a plug-and-play solution for installing a Bluetooth ethanol sensor in your S55-powered vehicle.

• Complete Upgrade: Replaces stock fuel lines with -6an E85-compatible lines from the fuel tank to the engine bay.
• Advanced Monitoring: Includes an ethanol sensor and Bluetooth analyzer for real-time ethanol content monitoring.
• Versatile Compatibility: Supports both Bluetooth App and 5v analog output for integration with JB4 or flash tuning.
• Custom Fitment: Options available for stock HPFP setups, port injection kits, or non-Fuel-It! port injection systems.
• High-Quality Components: Features BMS custom billet aluminum fittings for a seamless integration without modifications.
• Off-Road Use Only: Designed for off-road applications, ensuring high performance for enthusiasts.

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent.  The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories.  These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe