Find Parts That Fit Your Vehicle

BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

ECS - Corporate Logo
T#:56507859
Part#: 057807LA01KT
Ships Today
New Item
Sale - Save 33% $ 2,025.99

This product was last offered at the strikethrough price on
08-14-2026

$ 1,349.99 USD
Free Shipping
Sale - Save 33%
$ 2,025.99

This product was last offered at the strikethrough price on
08-14-2026

$ 1,349.99 USD
Free Shipping

Take total control of your E36's handling with the ECS Performance 2-Way Adjustable Coilover System. Built specifically for track use, this system bridges the gap between standard off-the-shelf coilovers and full-fledged motorsport suspension. These coilovers feature independent compression and rebound controls supported by external reservoirs; unlocking the precision tuning needed to shave seconds off your lap times.

Traditional 1-way coilovers force a single adjustment knob to balance both bump and rebound. These 2-way dampers eliminate that trade-off with fully independent compression and rebound controls. Use the 32 levels of compression adjustment to control front weight transfer under heavy braking, maximizing entry grip and allowing you to trail-brake deep into corners without understeer. 22 rebound levels fine-tune chassis recovery on brake release, keeping the front tires loaded through the apex for faster power-on exit speeds.

To maintain consistent performance during extended periods of performance driving, these dampers feature dedicated external fluid reservoirs that significantly increase total gas volume. During rigorous track use, rapid piston movement generates intense friction and heat, causing standard damper oil to thin out, aerate, and lose its damping force. By increasing overall fluid capacity, the external reservoirs effectively dissipate heat to keep peak oil temperatures down.

Show More Show Less
Genuine MINI - Corporate Logo
T#:534088
Part#: 33502412586
Ships in 4 Business Days
6% off MSRP $ 1,850.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,747.99 USD
6% off MSRP
$ 1,850.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,747.99 USD

Elevate your BMW's performance with this height-adjustable sports suspension, providing an adjustable range from 10mm to 20mm and stylish red coil springs. The set includes two stainless steel complete struts for the front axle, two dampers with threaded and adjustable spring plates for the front axle, two dampers for the rear axle, and two individual springs with an adjustable spring plate for the rear axle. Compatible with vehicles without Dynamic Damper Control (SA223).

  • Height-adjustable sports suspension for customized ride height (10mm to 20mm)
  • Eye-catching red coil springs for added style
  • Complete set includes components for front and rear axles
  • Stainless steel struts for durability and performance
  • Suitable for vehicles without Dynamic Damper Control (SA223)
Show More Show Less
Koni - Corporate Logo
T#:31092585
Part#: 1200-1008
In Stock
$ 2,198.67 USD
$ 2,198.67 USD
With a history developed in Formula 1 racing, KONI knows how to maximize the control of your suspension setup. KONI GTS coilover suspension kits combine world-class KONI Sport adjustable valving, linear lowering springs, ride height adjustable perches, and threaded bodies. A full kit ready to install on your car. Made for both on-road driving and weekend track days, the GTS range offers the user a fully customizable suspension package – ride height adjustable and valving adjustable – allowing a wide range of suspension setups from one kit. Look stylish with maximum suspension practicality with KONI GTS. Features KONI DNA in a stylish coilover setup, with world-class Sport adjustable technology Both ride height and valving adjustability Full kit, including top mount, ready to install Dual purpose for on road and on the track Perfect for amateur motor enthusiast Option to customize spring rates to suit vehicle setup For 1”-4” lowering, depending on application
Show More Show Less

Turner Motorsport - Corporate Logo
T#:339013
Part#: TMS3850
Back Ordered
Sale - Save 3% $ 3,391.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 3,290.23 USD
Sale - Save 3%
$ 3,391.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 3,290.23 USD
Special bundle offer! This kit adds Turner swaybars, Turner front adjustable sway bar / swaybar links, adjustable rear swaybar links, and JTD aluminum rear shock mounts to our TrackSport Coil-over suspension kit, for just $500 more. That's an additional $248.41 off the bundled items, combined for a $348.41 in savings (WOW!!). Kit fits all 2001-2006 E46 M3.

Our own custom Coil-Over suspension kit for the E46 M3 has been designed specifically for the committed motorsport enthusiast who is willing to relinquish ride comfort on the street in return for razor-sharp handling performance. This is our firmest streetable coil-over kit, making it the choice for weekend track and club sport events. Designed and engineered by Turner Motorsport and H&R, these kits are Nurburgring tested and Autobahn / TUV approved. Such a combination of handling performance and quality simply cannot be matched at this special low introductory price.

This kit consists of the following
� Turner TrackSport Coil-over suspension - (front and rear H&R/Bilstein fixed-valving dampeners matched to Turner customized H&R coil springs, and feature fully-threaded front shock bodies (not an imitation sleeve-over) and adjustable rear spring perches that allow you to precisely dial in front and rear ride height. (kit tends to lower the car 1-2" front and .75-1.6" rear). Each shock is engineered to work in harmony with its matched progressive-rate spring (about 400 lbs front and 650 lbs rear), together creating a finely tuned suspension system.
� Turner E46 M3 sway bar / swaybar Set - 30mm 3-way adjustable front bar and 25mm 2-way adjustable rear bar, including sway bar bushings.
� Turner Adjustable Front Swaybar Links (pair) - Quiet operation and long life as the stock links, plus the strength and adjustability of rod-end style links. These allow you to neutralize preload on swaybars to balance the car.
� TMS Adjustable Rear Swaybar Links (pair)
� JTD Aluminum Rear Shock Tower Mounts (pair)

Kit fits all E46 M3, as produced in 2001, 2002, 2003, 2004, 2005 & 2006. Pictured with our (optional) Turner Camber plates, these are not included in the basic coil-over kit, but can be added to dial front camber/caster settings, available in street or race versions.
Show More Show Less

Koni - Corporate Logo
T#:31092584
Part#: 1200-1007
Ships in 5 Business Days
$ 2,198.67 USD
$ 2,198.67 USD
With a history developed in Formula 1 racing, KONI knows how to maximize the control of your suspension setup. KONI GTS coilover suspension kits combine world-class KONI Sport adjustable valving, linear lowering springs, ride height adjustable perches, and threaded bodies. A full kit ready to install on your car. Made for both on-road driving and weekend track days, the GTS range offers the user a fully customizable suspension package – ride height adjustable and valving adjustable – allowing a wide range of suspension setups from one kit. Look stylish with maximum suspension practicality with KONI GTS. Features KONI DNA in a stylish coilover setup, with world-class Sport adjustable technology Both ride height and valving adjustability Full kit, including top mount, ready to install Dual purpose for on road and on the track Perfect for amateur motor enthusiast Option to customize spring rates to suit vehicle setup For 1”-4” lowering, depending on application
Show More Show Less
ECS - Corporate Logo
T#:48815453
Part#: 029309ECSKT
Ships in 5 Business Days
Sale - Save 9% $ 1,381.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,262.34 USD
Free Shipping
Sale - Save 9%
$ 1,381.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,262.34 USD
Free Shipping

This brand new BMW Coilover line from ECS Tuning was designed with daily drivers in mind! Their focus was to improve on the performance and look of the suspension, without forgoing any comfort. Like many of the top tier coilovers, these coilovers feel as smooth and comfortable as a stock setup, while giving you an aggressive look and vastly improved handling, all at a fraction of the price!

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: Front is 8kg/mm, Rear is 12kg/mm

PERFORMANCE FEATURES

32 levels of rebound damping adjustment Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height PRODUCT DESIGN

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity Threaded portions are clear zinc-coated for optimum corrosion protection against rain and salt Coil springs are powder-coated Reflex Silver Metallic finish for durability Red anodized, billet aluminum lower spring seats with locking collars allow for quick, on-the-car, adjustability with the included spanner wrenches Integrated bump stops KIT CONTENTS

ECS Performance Adjustable Coilover System - E9X (RWD) Front Suspension Installation Hardware: Strut Mount Gasket - 31306772226 (2) Spindle Pinch Bolt - 33326760346 (2) Spindle Pinch Nut - 33326760668 (2) Strut Rod to Cowl External Torx-Head Bolt - 07146954965 (1) Strut Rod to Strut Tower External Torx-Head Bolt - 07146963730 (2) Rear Suspension Installation Hardware: Lower Control Arm Nut - 33306760349 (4) Lower Shock Mount Bolt - 33526764406 (4) Lower Shock Mount - 33526768544 (2) Upper Shock Mount (Upper) - 33506771737 (2) Upper Shock Mount (Lower) - 33506771738 (2) Upper Shock Mount Sealing Grommet - 33506767010 (2)

Show More Show Less

Enthusiast Bundles - Corporate Logo
T#:25042580
Part#: 002361ECS01EBKT
In Stock
Sale - Save 20% $ 1,916.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,529.58 USD
Sale - Save 20%
$ 1,916.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,529.58 USD

Unleash the potential of your BMW with the F10 xDrive Coilovers, meticulously crafted for the daily driver seeking an optimal blend of performance, aesthetics, and comfort. With 32 levels of damping and tailored height adjustments, these coilovers strike the perfect balance between firmness and compliance, enhancing your vehicle's look and handling prowess.

Key Features:

  • ECS Tuning Performance Coilover System:
    • Sport-tuned, height, damping, and body adjustable suspension
    • 32 levels of rebound damping adjustment
    • Adjustable front sway bar end links
    • Lowering Adjustment of: 1" - 4.5"
    • Progressive rate coil springs for heat-treated durability
    • Monotube shocks/struts for road-sticking grip
    • Lowered ride height for improved handling
    • Adjustable front bodies for personalized ride height and correct spring pre-load

Product Design:

  • Strut and shock bodies finished in durable gloss black powder coat
  • Zinc-coated threaded portions for corrosion protection
  • Reflex Silver Metallic powder-coated coil springs
  • Red anodized, billet aluminum spring seats with locking collars
  • Anodized adjustable sway bar end links with heavy-duty bushings
  • Zinc-coated flanged nuts for shock & strut shaft pins
  • E-coated rear shock adjuster housings for durability
  • Zinc-coated lower spring perches
  • Integrated bump stops and dust boots

Note: For vehicles without Electronic Damping (EDC/DDC or Adaptive Suspension). Vehicles with Electronic Damping will require the use of a cancellation kit to prevent error lights. (SEE ES#2966824)

Free Upgrade - Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings:

  • Solve weak OEM front thrust arm bushing issues
  • Sealed OEM BMW ball joint for exceptional durability
  • Precision CNC machined 6061-T6 anodized aluminum housing
  • Knurled OD for a perfect press fit
  • CNC machined 304ss bearing inserts for precision
  • Nearly instantaneous steering and braking response
  • Maintenance-free, long-lasting performance
  • Improved road feel without undesirable NVH
Show More Show Less
Suspension Techniques - Corporate Logo
T#:379569
Part#: 18220831KT
Back Ordered
$ 1,649.00 USD
Free Shipping
$ 1,649.00 USD
Free Shipping
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminum uniball top mount for fine-tuning of the camber and caster! ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Lowering within TüV-tested adjustment range of 1.6-3.1"F, 0.8-2.0"R Front and rear axle with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Aluminum adjustable uniball top mounts Scaled camber adjustment Externally adjustable damping 5 year limited warranty
Show More Show Less

ECS - Corporate Logo
T#:56507810
Part#: 057807LA01
In Stock
New Item
Sale - Save 43% $ 1,749.99

This product was last offered at the strikethrough price on
08-14-2026

$ 999.99 USD
Free Shipping
Sale - Save 43%
$ 1,749.99

This product was last offered at the strikethrough price on
08-14-2026

$ 999.99 USD
Free Shipping

Take total control of your E36's handling with the ECS Performance 2-Way Adjustable Coilover System. Built specifically for track use, this system bridges the gap between standard off-the-shelf coilovers and full-fledged motorsport suspension. These coilovers feature independent compression and rebound controls supported by external reservoirs; unlocking the precision tuning needed to shave seconds off your lap times.

Traditional 1-way coilovers force a single adjustment knob to balance both bump and rebound. These 2-way dampers eliminate that trade-off with fully independent compression and rebound controls. Use the 32 levels of compression adjustment to control front weight transfer under heavy braking, maximizing entry grip and allowing you to trail-brake deep into corners without understeer. 22 rebound levels fine-tune chassis recovery on brake release, keeping the front tires loaded through the apex for faster power-on exit speeds.

To maintain consistent performance during extended periods of performance driving, these dampers feature dedicated external fluid reservoirs that significantly increase total gas volume. During rigorous track use, rapid piston movement generates intense friction and heat, causing standard damper oil to thin out, aerate, and lose its damping force. By increasing overall fluid capacity, the external reservoirs effectively dissipate heat to keep peak oil temperatures down.

Show More Show Less

Bilstein - Corporate Logo
T#:346253
Part#: 46-181060
Special Order: No Guaranteed ETA
$ 967.00 USD
Free Shipping
$ 967.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling. 

Bilstein B12 Features: 

  • Quick response and precise handling
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 30 to 60mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1992-1999 E36 BMW 325i 328i 323i

Show More Show Less
Bilstein - Corporate Logo
T#:346242
Part#: 46-180520
Special Order: No Guaranteed ETA
$ 999.00 USD
Free Shipping
$ 999.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2008-2013 E82 BMW 128i

Show More Show Less
Bilstein - Corporate Logo
T#:26204998
Part#: 47-326170
Special Order: No Guaranteed ETA
$ 2,408.99

This product was last offered at the strikethrough price on
07-08-2026

$ 1,820.00 USD
Free Shipping
$ 1,820.00 USD
Free Shipping
Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO S is a coilover kit built and tuned specifically for everyday street use. Featuring ride height adjustability in an OE quality, direct fit package. Redesigned threaded-bodied dampers allow for extreme lowering of up to 70mm. High quality components ensure longevity through everyday use while providing a sportier look. Improved handling and ride comfort are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nurburgring.
Show More Show Less


Bilstein - Corporate Logo
T#:346258
Part#: 46-181190
Special Order: No Guaranteed ETA
$ 1,139.00 USD
Free Shipping
$ 1,139.00 USD
Free Shipping
The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling.
Show More Show Less
Bilstein - Corporate Logo
T#:346252
Part#: 46-180964
Special Order: No Guaranteed ETA
$ 1,019.00 USD
Free Shipping
$ 1,019.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1994-1999 E36 BMW 325i, 328i, 323i

Show More Show Less
KW Suspension - Corporate Logo
T#:587683
Part#: 3A7200BB
Back Ordered
$ 6,014.00 USD
Free Shipping
$ 6,014.00 USD
Free Shipping
**ONLY FOR VEHICLES WITH STANDARD SUSPENSION (WITHOUT EDC/ADAPTIVE SUSPENSION)** The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day to day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Spring Rate of 285lbs/inch Front and 685lbs/inch Rear.
Show More Show Less

KW Suspension - Corporate Logo
T#:34650260
Part#: 152200AG
Back Ordered
$ 2,594.00 USD
$ 2,594.00 USD

KW Suspension - Corporate Logo
T#:215355
Part#: 1022000J
Ships in 4 Business Days
$ 2,094.00 USD
Free Shipping
$ 2,094.00 USD
Free Shipping
Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33/F36 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 435i Convertible
    2014+ F36 BMW 435i Gran Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:193559
    Part#: 1522000R
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:4347100
    Part#: I-29-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:596969
    Part#: 352200BP
    Back Ordered
    $ 3,634.00 USD
    Free Shipping
    $ 3,634.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50731735
    Part#: 15220011-B
    Back Ordered
    New Item
    $ 2,144.00 USD
    Free Shipping
    $ 2,144.00 USD
    Free Shipping
    Designed for the enthusiast who wants to dial in their setup, this system features 16 clicks of adjustable rebound damping.

    KW Suspension - Corporate Logo
    T#:11599
    Part#: 15220033
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping

    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2007-2012 E91 BMW 328i - Wagon
    2007-2013 E93 BMW 328i 335i - Convertible

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50830138
    Part#: 35208200BU
    Back Ordered
    New Item
    $ 3,584.00 USD
    Free Shipping
    $ 3,584.00 USD
    Free Shipping
    Engineered for drivers who prioritize sportier handling and chassis stability over extreme lowering.
    KW Suspension - Corporate Logo
    T#:11651
    Part#: 35220058
    Back Ordered
    $ 4,194.00 USD
    Free Shipping
    $ 4,194.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

     

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 15-45mm lowering; Rear = 15-45mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,
    • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

      Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

      Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
      The factory EDC system must be disabled with the KW EDC Cancellation Kit.

      Lifetime warranty!




      This item fits the following BMWs:
      2006-2011 E63 BMW M6

     

    Show More Show Less


    KW Suspension - Corporate Logo
    T#:341230
    Part#: 1522000E
    Back Ordered
    $ 2,924.00 USD
    Free Shipping
    $ 2,924.00 USD
    Free Shipping
    The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766807
    Part#: 352200ER
    Back Ordered
    New Item
    $ 4,094.00 USD
    Free Shipping
    $ 4,094.00 USD
    Free Shipping
    The KW V3 is the ultimate suspension solution for the M4 Competition xDrive Convertible.
    BC Racing - Corporate Logo
    T#:4319921
    Part#: I-01-HM
    Back Ordered
    $ 2,535.00 USD
    Free Shipping
    $ 2,535.00 USD
    Free Shipping
    BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:349025
    Part#: 1022000L
    Ships in 4 Business Days
    $ 2,384.00 USD
    Free Shipping
    $ 2,384.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:367046
    Part#: 10220006
    Back Ordered
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:361870
    Part#: 15220080
    Back Ordered
    $ 2,834.00 USD
    Free Shipping
    $ 2,834.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i without EDC
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:638035
    Part#: 1820220821
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping
    After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics. Features: Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Individual lowering within the tested adjustment range Front and rear axle (when possible) with thread adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection Aluminum adjustable uniball top mounts (when possible) Scaled camber adjustment (when possible) 3-way adjustable dampers: 18 clicks low-speed rebound damping 24 clicks low-speed compression damping 24 clicks high-speed compression damping Lowering Specifications: Front: 1.2-2.8" Rear: 1.2-2.0"
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:31324153
    Part#: 15220070KT
    Back Ordered
    $ 2,594.00 USD
    $ 2,594.00 USD

    KW V2 Coilover Kit for Mini R56 Cooper S and JCW

    The KW V2 Coilover Kit is designed for the experienced driver looking to finely tune their vehicle's performance. Ideal for the Mini R56 Cooper S and JCW models, this system allows for individual lowering and precise setup adjustments, enhancing both handling and driving pleasure.

    Key Benefits:

    • Stainless Steel Inox-Technology for durability and longevity
    • High-quality components for reliable performance
    • Adjustable rebound dampening for custom pitch and roll behavior
    • TüV approved lowering range for legal compliance
    • Fully finished, complete solution for easy installation
    • Average lowering range of 1.2 to 2.2 inches for front and rear
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50731716
    Part#: 102200EV
    Back Ordered
    New Item
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    Upgrade your G23 with the ultimate balance of performance and safety.

    KW Suspension - Corporate Logo
    T#:582610
    Part#: 15220042KT
    Back Ordered
    $ 2,154.00 USD
    Free Shipping
    $ 2,154.00 USD
    Free Shipping
    With adjustable rebound damping, you can dial in the exact response, feedback, and cornering stability you need to give your car a real competitive edge whether you're carving up back roads or hunting down lap times.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731722
    Part#: 102200EW
    Back Ordered
    New Item
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.
    BC Racing - Corporate Logo
    T#:4333547
    Part#: I-13-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:5175672
    Part#: 1802000F
    Ships in 4 Business Days
    $ 2,454.00 USD
    Free Shipping
    $ 2,454.00 USD
    Free Shipping
    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort – The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:4908015
    Part#: 39020048
    Back Ordered
    $ 4,354.00 USD
    Free Shipping
    $ 4,354.00 USD
    Free Shipping
    Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience.
    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:4319902
    Part#: 18202208AH
    Back Ordered
    $ 2,799.00 USD
    Free Shipping
    $ 2,799.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:50830335
    Part#: 352082000G
    Back Ordered
    New Item
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping
    Designed for drivers who prioritize chassis stability and steering response over aggressive lowering.

    KW Suspension - Corporate Logo
    T#:590905
    Part#: 1022000Q
    Ships in 4 Business Days
    $ 2,094.00 USD
    $ 2,094.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a BMW owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:349019
    Part#: 10220063
    Back Ordered
    $ 2,344.00 USD
    Free Shipping
    $ 2,344.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 10-35mm lowering; Rear = 5-35mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a E93 M3 Convertible owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2008-2013 E93 BMW M3 - Convertible
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:4347102
    Part#: I-61-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:598968
    Part#: 352200CQ
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11693544
    Part#: 397202EB
    Back Ordered
    $ 10,094.00 USD
    Free Shipping
    $ 10,094.00 USD
    Free Shipping
    You can tune the low-speed compression damping with six precise clicks on the purple adjustment dial. The gold adjustment dial allows the user to change the high-speed compression damping with 14 precise clicks. Rebound adjustment is provided with 16 clicks, each providing a noticeable change. A reduction in rebound forces provides a more comfortable ride quality suitable for highway driving.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:206109
    Part#: 1522000Z
    Back Ordered
    $ 2,684.00 USD
    Free Shipping
    $ 2,684.00 USD
    Free Shipping
    Adjustable Rebound Damping The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including - Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable Front Lowering:1.2" to 2.0" Rear Lowering:1.2" to 2.4" TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. Coilover suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Lifetime warranty!
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766808
    Part#: 352200EL
    Back Ordered
    New Item
    $ 3,094.00 USD
    Free Shipping
    $ 3,094.00 USD
    Free Shipping
    The KW V3 is the premier suspension solution for the BMW i3 series.
    BC Racing - Corporate Logo
    T#:4347101
    Part#: I-80-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less