Find Parts That Fit Your Vehicle

BMW Springs

Springs are the easiest and most cost effective way to improve your handling, get a more aggressive rake, and give your vehicle a more attractive stance. We do recommend replacing your shocks and struts at the same time with either Bilstein or Koni dampers.

Sub-Categories

Sort By:

Emmanuele Design - Corporate Logo
T#:568357
Part#: EMD-F82-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:555227
Part#: EMD-F80-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:211209
Part#: E46M3-R-SPRINGS
In Stock
Sale - Save 13% $ 104.02

This product was last offered at the strikethrough price on
05-03-2026

$ 90.20 USD
Free Shipping
Sale - Save 13%
$ 104.02

This product was last offered at the strikethrough price on
05-03-2026

$ 90.20 USD
Free Shipping
  • GERMAN-MADE
  • DIRECT REPLACEMENT
  • LIFETIME WARRANTY!
  • BUY A PAIR FOR THE PRICE OF FACTORY SINGLE!

The rear springs on the 2001-2006 E46 M3 models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time.

The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Replaces Coupe models only.

This item fits the following BMWs:
2001-2006 E46 BMW M3 Coupe

Show More Show Less

Mubea - Corporate Logo
T#:591431
Part#: 33533413080
Ships in 2 Business Days
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
This is the standard ride height factory rear spring. They are sold individually. The factory springs have a tendency to break over time. These springs will restore your ride back to the stock ride height.
Show More Show Less

GODSPEED - Corporate Logo
T#:2347993
Part#: LS-TS-MC-0004
Ships in 3 Business Days
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
Mubea - Corporate Logo
T#:189830
Part#: 31333412729-2
Ships on Sep 8, 2026
$ 137.99 USD
Free Shipping
$ 137.99 USD
Free Shipping
The front springs on the 2004-2010 E83 X3 models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off. Typically the X3 was popular in markets with heavy salt and moisture anyway and water can pool in the bottom spring pad.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time.

The factory BMW springs sell for $200+ each. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Sold only as a pair.

This item fits the following BMWs:
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
NOT for cars with sport suspension
Show More Show Less

Turner Motorsport - Corporate Logo
T#:340476
Part#: TSU9980548
Ships on Dec 22, 2026
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:340477
Part#: TSU998062A
Ships on Dec 22, 2026
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less

GODSPEED - Corporate Logo
T#:2347991
Part#: LS-TS-MC-0003
Ships in 5 Business Days
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping

Mubea - Corporate Logo
T#:396134
Part#: 33531095742SKTKT
Ships on Sep 8, 2026
$ 131.99 USD
Free Shipping
$ 131.99 USD
Free Shipping


DIRECT REPLACEMENT

 LIFETIME WARRANTY!

BUY A PAIR FOR THE PRICE OF FACTORY SINGLE! 

The rear springs on the 1999-2005 E46 323i 325i 328i and 330i models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time. Check if your car has 5mm or 15mm thick pads.

The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Sold only as a pair.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 328i 330i - Sedan

Show More Show Less
Mubea - Corporate Logo
T#:13200578
Part#: 31336767376
Ships on Sep 8, 2026
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping