Find Parts That Fit Your Vehicle

BMW Springs

Springs are the easiest and most cost effective way to improve your handling, get a more aggressive rake, and give your vehicle a more attractive stance. We do recommend replacing your shocks and struts at the same time with either Bilstein or Koni dampers.

Sub-Categories

Sort By:

Emmanuele Design - Corporate Logo
T#:568357
Part#: EMD-F82-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:555227
Part#: EMD-F80-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:211209
Part#: E46M3-R-SPRINGS
In Stock
Sale - Save 13% $ 104.02

This product was last offered at the strikethrough price on
05-03-2026

$ 90.20 USD
Free Shipping
Sale - Save 13%
$ 104.02

This product was last offered at the strikethrough price on
05-03-2026

$ 90.20 USD
Free Shipping
  • GERMAN-MADE
  • DIRECT REPLACEMENT
  • LIFETIME WARRANTY!
  • BUY A PAIR FOR THE PRICE OF FACTORY SINGLE!

The rear springs on the 2001-2006 E46 M3 models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time.

The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Replaces Coupe models only.

This item fits the following BMWs:
2001-2006 E46 BMW M3 Coupe

Show More Show Less

MMX Performance - Corporate Logo
T#:31656075
Part#: MMR08-1702
Ships in 3 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX Performance Lowering Springs for the BMW G42 230i strike the ideal balance between sharper handling and a more aggressive stance, all without compromising ride comfort. With a drop of approximately 20mm at the front and 15mm at the rear, the G42 gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in. Lowering the car’s centre of gravity makes a real difference to the way it drives. Body roll is noticeably reduced, turn-in feels sharper, and overall dynamics are greatly improved, all while retaining the comfort and refinement you’d expect from a BMW. Thanks to carefully chosen progressive spring rates, low-speed ride quality remains smooth and, in fact, actually feels more composed around town. But push on and the G42’s chassis comes alive: it feels lighter on its feet, more direct, and properly responsive through the corners. Just what the 230i needed. Visually, the difference is just as striking. The lower ride height gives the car a more aggressive, purposeful stance without being over-the-top. Go any lower or firmer than these, and you risk upsetting the balance, leading to a crashy, unsettled ride. That’s why MMX Springs are engineered specifically to work in harmony with both static and Adaptive M dampers. Features: 20mm front / 15mm rear drop for a sportier stance. Sharpened handling with reduced body roll. Smooth ride quality thanks to progressive spring rates. More responsive chassis feel at higher speeds. Compatible with adaptive & static dampers. No bouncing or crashing – perfectly matched spring rates Premium Metallic Grey finish Direct fit for BMW 230i G42
Show More Show Less

Mubea - Corporate Logo
T#:591431
Part#: 33533413080
Ships in 2 Business Days
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
This is the standard ride height factory rear spring. They are sold individually. The factory springs have a tendency to break over time. These springs will restore your ride back to the stock ride height.
Show More Show Less
MMX Performance - Corporate Logo
T#:43784136
Part#: MMR08-0810
Ships in 3 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX Performance Lowering Springs deliver a perfect blend of enhanced handling and a more aggressive stance, all while preserving everyday ride comfort. Lowering the front by up to 30mm and the rear by up to 25mm, these springs give your 4-Series a more planted feel, with improved responsiveness, reduced body roll, and sharper turn-in characteristics.
Show More Show Less

GODSPEED - Corporate Logo
T#:2347993
Part#: LS-TS-MC-0004
Ships in 3 Business Days
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
Mubea - Corporate Logo
T#:189830
Part#: 31333412729-2
Ships on Sep 8, 2026
$ 137.99 USD
Free Shipping
$ 137.99 USD
Free Shipping
The front springs on the 2004-2010 E83 X3 models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off. Typically the X3 was popular in markets with heavy salt and moisture anyway and water can pool in the bottom spring pad.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time.

The factory BMW springs sell for $200+ each. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Sold only as a pair.

This item fits the following BMWs:
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
NOT for cars with sport suspension
Show More Show Less

Turner Motorsport - Corporate Logo
T#:340476
Part#: TSU9980548
Ships on Dec 22, 2026
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less

Turner Motorsport - Corporate Logo
T#:340477
Part#: TSU998062A
Ships on Dec 22, 2026
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
GODSPEED - Corporate Logo
T#:2347991
Part#: LS-TS-MC-0003
Ships in 5 Business Days
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
MMX Lowering Springs - F8x M3/M4
For Vehicles Without Adaptive Suspension
MMX Performance - Corporate Logo
T#:4565853
Part#: MMR08-1001
Ships in 3 Business Days
$ 263.99 USD
Free Shipping
$ 263.99 USD
Free Shipping
MMX's Performance lowering spring kit delivers the perfect blend of improved handling, enhanced looks, and maintains ride quality. The drop in ride-height makes a huge difference to the handling characteristics making the vehicle feel lighter and much more nimble. Finished in MMR blue, the lowering springs provide a drop at the front of 25mm and at the rear 15mm. Thanks to the spring rates the ride-quality remains relatively unaffected, but through corners the chassis really comes to life. Features: Lowers vehicle by 25mm front | 15mm rear Powder coated in MMR blue for a durable finish
Show More Show Less


MMX Performance - Corporate Logo
T#:39768326
Part#: MMR08-1603
Ships in 4 Business Days
$ 1,152.99 USD
Free Shipping
$ 1,152.99 USD
Free Shipping
Unlike conventional lowering springs, the MMR Height adjustable springs (HAS) for the current G80 M3, G82 M4 and G87 M2 gives you a fully customisable ride height adjustment. So, however you want your car to sit, our kit allows you to infinitely fine tune heights front and rear until you reach your ideal stance. By retaining the adaptive M dampers, this HAS solution is much more cost-effective than upgrading to coilover suspension, yet with the reassurance of keeping your high quality, sophisticated factory dampers in place. Best of both worlds. The method of height adjustment is exactly the same as on a coilover suspension setup. Four adjustable perches fit underneath the Sport Springs. With a simple turn up or down on the threaded platform to adjust ride height, you can tailor it until reaches your perfect height and rake. This generous sweep of adjustment provides a lowering range of 20-45mm on the front and 10-35mm at the rear (versus the factory ride height). The sport springs themselves, finished in beautiful MMR grey, are progressive rate springs, with rates carefully chosen to match with the damper characteristics of the factory M2, M3 & M4 G8x suspension. Features: A lowering range of 20-45mm on the front and 10-35mm at the rear. Retain adaptive M dampers. Fitment for RWD & X-Drive variants. Fitting is straightforward and installed with no modifications required. Easily returned to standard, should you ever wish. Specifically designed for the BMW G-Series platform. Kit complete with everything you need.
Show More Show Less
MMX Performance - Corporate Logo
T#:43784137
Part#: MMR08-1800
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX Performance Lowering Springs deliver a perfect blend of enhanced handling and a more aggressive stance, all while preserving everyday ride comfort. Lowering the front by up to 30mm and the rear by up to 30mm, these springs give your 4-Series a more planted feel, with improved responsiveness, reduced body roll, and sharper turn-in characteristics.
Show More Show Less
MMX Performance - Corporate Logo
T#:41188170
Part#: MMR08-0730
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX Performance Lowering Springs strike the ideal balance between sharper handling and a more aggressive stance — all without compromising ride comfort. With a drop of approximately 30mm at the front and up to 20mm at the rear, the F31 Touring gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in.
Show More Show Less

MMX Performance - Corporate Logo
T#:51320844
Part#: MMR08-1300
Ships in 4 Business Days
New Item
$ 334.99 USD
Free Shipping
$ 334.99 USD
Free Shipping

MMX Performance - Corporate Logo
T#:39768319
Part#: MMR08-1003
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
The MMR Performance lowering springs for BMW F80 M3 and M3 Competition models deliver the perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. The 25-10mm drop in ride height brings the M-Car to life making it feel lighter, more direct and with significantly sharper turn-in. Finished in MMR metallic grey, our springs are developed to be fully compatible with cars fitted with either static or dynamic dampers. A must-fit for any BMW M3 F80. Features: A front drop of 25mm whilst the rear sits lower by 10mm. Fully compatible with cars fitted with either static or dynamic dampers. Perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. Specifically designed by us for the M3. Bespoke spring poundage for improved driving dynamics. Finished in MMR metallic grey.
Show More Show Less
MMX Performance - Corporate Logo
T#:42234668
Part#: MMR08-1910
Ships in 4 Business Days
$ 467.99 USD
Free Shipping
$ 467.99 USD
Free Shipping
MMX Performance Lowering Springs for the BMW G90 M5 xDrive strike the ideal balance between sharper handling and a more aggressive stance, all without compromising ride comfort. With a drop of approximately 25mm at the front and 20mm at the rear, the G90 gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in.
Show More Show Less

MMX Performance - Corporate Logo
T#:39768320
Part#: MMR08-1002
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
The MMR Performance lowering springs for BMW OG M2 and M2 Competition models deliver the perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. The 30-35mm drop in ride height brings the M-Car to life making it feel lighter, more direct and with significantly sharper turn-in. Finished in MMR metallic grey, our springs are developed to be fully compatible with cars fitted with either static or dynamic dampers. A must-fit for any BMW M2 F87. Features: A front drop of 30mm whilst the rear sits lower by 35mm. Fully compatible with cars fitted with either static or dynamic dampers. Perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. Specifically designed by us for the M2. Bespoke spring poundage for improved driving dynamics. Finished in MMR metallic grey.
Show More Show Less
MMX Performance - Corporate Logo
T#:49892384
Part#: MMR08-1911
Ships in 4 Business Days
New Item
$ 467.99 USD
Free Shipping
$ 467.99 USD
Free Shipping
MMX Performance Lowering Springs for the BMW G99 M5 Touring xDrive strike the ideal balance between sharper handling and a more aggressive stance, all without compromising ride comfort. With a drop of approximately 25mm at the front and 15mm at the rear, the G99 gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in.
Show More Show Less

MMX Performance - Corporate Logo
T#:41188171
Part#: MMR08-0720
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX Performance Lowering Springs strike the ideal balance between sharper handling and a more aggressive stance — all without compromising ride comfort. With a drop of approximately 30mm at the front and up to 25mm at the rear, the F31 Touring gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in.
Show More Show Less

MMX Performance - Corporate Logo
T#:39768318
Part#: MMR08-1004
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
The MMR Performance lowering springs for BMW F82 M4 and M4 Competition models deliver the perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. The 25-20mm drop in ride height brings the M-Car to life making it feel lighter, more direct and with significantly sharper turn-in. Finished in MMR metallic grey, our springs are developed to be fully compatible with cars fitted with either static or dynamic dampers. A must-fit for any BMW M4 F82. Features: ​A front drop of 25mm whilst the rear sits lower by 20mm. Fully compatible with cars fitted with either static or dynamic dampers. Perfect blend of improved dynamics and enhanced looks, yet without sacrificing ride quality. Specifically designed by us for the M4. Bespoke spring poundage for improved driving dynamics. Finished in MMR metallic grey.
Show More Show Less
MMX Performance - Corporate Logo
T#:43784135
Part#: MMR08-0800
Ships in 4 Business Days
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX Performance Lowering Springs deliver a perfect blend of enhanced handling and a more aggressive stance, all while preserving everyday ride comfort. Lowering the front by up to 30mm and the rear by up to 30mm, these springs give your 4-Series a more planted feel, with improved responsiveness, reduced body roll, and sharper turn-in characteristics.
Show More Show Less
Mubea - Corporate Logo
T#:396134
Part#: 33531095742SKTKT
Ships on Sep 8, 2026
$ 131.99 USD
Free Shipping
$ 131.99 USD
Free Shipping


DIRECT REPLACEMENT

 LIFETIME WARRANTY!

BUY A PAIR FOR THE PRICE OF FACTORY SINGLE! 

The rear springs on the 1999-2005 E46 323i 325i 328i and 330i models have a chronic broken spring problem. If it hasn't happened to you yet it will. Springs are nothing more than exposed steel and they rust easily. After a while a section of the spring actually breaks off.

A broken spring is very dangerous - the spring is no longer mounted correctly in the suspension and it cannot support the weight of the car, especially when cornering. The ride also suffers as the suspension is no longer able to absorb the bumps and impacts from the road. Aside from a visual inspection of the spring itself you might notice a clunking sound or banging noise coming from the front or rear. An inspection of the noise should also include other related items in the suspension: bushings, ball joints, links, mounts, etc. We also recommend replacing the rubber spring pads on the top and bottom of the spring because they lose their shape over time. Check if your car has 5mm or 15mm thick pads.

The factory BMW springs sell for $140+ each. We sold and replaced enough while working in New England that we were able to get a strong grasp of the issue and come up with our own springs that are an improvement over the factory springs in every way. These springs are made in Germany using high grade spring steel that is then shot-peened for longer life and powder-coated for protection. These are the same height as the stock replacement BMW springs which makes them a direct replacement.

Sold only as a pair.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 328i 330i - Sedan

Show More Show Less


Mubea - Corporate Logo
T#:13200578
Part#: 31336767376
Ships on Sep 8, 2026
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
MMX Performance - Corporate Logo
T#:4565859
Part#: MMR08-0501
Special Order: No Guaranteed ETA
$ 332.99 USD
Free Shipping
$ 332.99 USD
Free Shipping
MMX's Performance lowering spring kit delivers the perfect blend of improved handling, enhanced looks, and maintains ride quality. The drop in ride-height makes a huge difference to the handling characteristics making the vehicle feel lighter and much more nimble. Finished in MMR blue, the lowering springs provide a drop at the front of 20mm and at the rear 30mm. Thanks to the spring rates the ride-quality remains relatively unaffected, but through corners the chassis really comes to life. Features: Lowers vehicle by 20mm front | 30mm rear Powder coated in MMR blue for a durable finish
Show More Show Less