BMW Z Series G29 (2019+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Port Injector Plugs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
BMS Pedal Tuner - N52, N54, N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
BMW / MINI Jack Pad Adapters - Blue - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:31522930
Part#: BMWJACKPADBLUE4
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less
JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less

Titanium Exhaust Wrap - 2" X 25'
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385025
Part#: HEA-WRAPKIT-25
Ships in 1 Business Day
$ 29.99 USD
Free Shipping on orders $49 and up

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

  • 2" wide x 1/16" thick
  • Durable, tightly woven, 100% fiberglass
  • Reduce under hood temperatures
  • Protect other engine components
  • Protect your hands/arms from burns
  • Each roll comes with 5 FREE, 14" long stainless steel zip ties
Show More Show Less
Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:43378540
Part#: B58G2OFH
In Stock
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
In Stock
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less

Prosport Titanium Exhaust Wrap - 2" x 50
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385019
Part#: HEA-WRAPKIT-50
Ships in 5 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Show More Show Less
BMW B58 3.0L Charge Pipe - Wrinkle Black
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:28604064
Part#: 15-007
Ships in 9 Business Days
5% off MSRP $ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 284.99 USD
Free Shipping
5% off MSRP
$ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 284.99 USD
Free Shipping

BMW B58 3.0L Charge Pipe - Wrinkle Black addresses common issues with the factory plastic charge pipe, which is prone to blow-outs and can lead to engine limp mode and performance loss. This high-performance upgrade by Active Autowerke features a robust all-aluminum construction that enhances durability and prevents structural failure. The CNC-machined connection ensures a precise fit and reliable seal at the throttle body. With wrinkle black powder coating for a sleek, OEM appearance, this charge pipe improves throttle response and performance, making it a superior choice for your BMW.

  • Replaces the factory plastic charge pipe with durable all-aluminum construction
  • Prevents blow-outs and engine limp mode issues
  • CNC-machined connection for a precise and reliable fit
  • Consistent diameter tubing enhances performance
  • Increases throttle response and reduces throttle lag
  • Retains factory BMW o-ring seal for a secure fit
  • Includes two raised bosses for Water/Methanol Injection (WMI) nozzles
  • Wrinkle black powder-coated for a sleek, OEM look
  • Comes with high-quality silicone couplers and stainless clamps for easy installation
  • Ideal upgrade for B58TU-equipped BMW models to safeguard against charge pipe failure
Show More Show Less
Prosport Gold Heat Reflective Tape - 2" x 15'
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385020
Part#: HEA-GWRAP-15
Back Ordered
$ 33.99 USD
Free Shipping on orders $49 and up
Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.
Show More Show Less


Tire Valve For TPMS Systems
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
JB+ Quick Install Tuner - B58 - 3 Wire
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21012607
Part#: JBPLUS-B58-3W
In Stock
$ 239.00 USD
Free Shipping on orders $49 and up
The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!
Show More Show Less
Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:40004848
Part#: JB4-B48
In Stock
$ 599.00 USD
Free Shipping on orders $49 and up
The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.
Show More Show Less

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:31390598
Part#: PSTOP270-12
In Stock at Vendor
$ 45.00 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

  • Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
  • Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
  • White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
  • Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
  • Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.
Show More Show Less

Universal BMW Jack Pad Red - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less
Billet Oil Filter Cap
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21045500
Part#: BMS-BOFC
In Stock
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA
Show More Show Less

1 Gallon Methanol Tank - Clear/White
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
Ships in 5 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
Digital Oil Pressure Gauge EVO Series - 0-150 Psi
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389617
Part#: 216EVOEOP.PSI
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Pressure Guage (0-150 PSI) 
  • Instructions
  • Mounting hardware
  • Decals
  • Premium Electric Sender 
  • Wiring harness adapter
  • Dual color display (Blue or Red)
Show More Show Less

BMW Jack Pad Silver - Set Of 4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:26438196
Part#: BMWJACKPADSILR4
Ships in 1 Business Day
$ 77.99 USD
Free Shipping on orders $49 and up

BMS Elite Charge Pipe - BMW Gen2 B58 3.0L (B58TU / B58C / B58D) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21209828
Part#: B58G2CP
Back Ordered
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. ​In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing
Show More Show Less
JB+ Quick Install Tuner - B48 - 3 Wire
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21012609
Part#: JBPLUS-B48-3W
In Stock
$ 238.99 USD
Free Shipping on orders $49 and up
The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!
Show More Show Less
BMS JB4 Port Injection Controller - F/G Chassis
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21012590
Part#: F-G-PORTINJCONMO
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.
Show More Show Less


BMS Differential Support Bracket Brace For G Chassis BMW/Supra ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:49822560
Part#: BMSDSBBG
In Stock
New Item
$ 229,229.00

This product was last offered at the strikethrough price on
01-21-2026

$ 229.00 USD
Free Shipping on orders $49 and up
$ 229.00 USD
Free Shipping on orders $49 and up
For G-Chassis BMW & A90/A91 Toyota Supra High torque loads, hard launches, and aggressive driving expose the factory differential mounting’s built-in compliance. Under power, the differential can shift excessively, resulting in wheel hop, inconsistent traction, and increased stress on drivetrain components—issues that become more pronounced on tuned or track-driven cars. The BMS Differential Support Bracket Brace corrects this weakness by reinforcing the differential mounting point and securely tying it to the subframe. By controlling unwanted movement, the brace improves rear-end stability and ensures power is transferred to the ground more efficiently. Why Upgrade? OEM differential mounts favor NVH reduction over control. As torque output increases, that compliance translates into drivetrain shock and lost traction. This brace stiffens the system where it matters most, reducing flex and improving load management under acceleration. Performance Benefits Improved launch consistency Significant reduction in wheel hop Increased rear-end stability under load More precise and predictable power delivery Engineered for Demanding Use Designed around factory mounting points, the BMS Differential Support Bracket delivers precise OE-level fitment with increased structural rigidity. Its robust construction resists deflection under high torque, while upgraded hardware provides greater clamping force for long-term reliability. Fully bolt-on for straightforward installation on both stock and modified vehicles. Key Features Reinforces rear differential mounting Limits differential movement under load Enhances traction and drivetrain response Heavy-duty construction for high-performance applications Bolt-on installation using factory locations Compatible with G-chassis BMW and A90/A91 Supra A focused drivetrain upgrade for drivers who demand consistency, control, and durability at higher performance levels.
Show More Show Less
52mm Prosport Electrical Oil Pressure Gauge - 0-100 Psi Blue/White ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:31158801
Part#: 216BFWBOPSM.PSI
Ships in 2 Business Days
$ 69.99 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - 0-100 PSI Blue/White is essential for accurate engine monitoring. Unlike factory gauges, which may only alert you after damage has occurred, this Prosport gauge provides real-time, precise oil pressure readings, allowing you to identify potential issues before they escalate.

  • Monitors engine oil pressure from 0 to 100 PSI.
  • Features blue and white illumination for clear visibility.
  • Includes sender, mounting hardware, visor, decals, and instructions.
  • Enhances engine monitoring and helps prevent damage.
  • Universal fitment may require modification for proper installation.
Show More Show Less
BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:51848519
Part#: G12B48CP
In Stock
New Item
$ 299.00 USD
Free Shipping on orders $49 and up
$ 299.00 USD
Free Shipping on orders $49 and up
The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.
Show More Show Less

EVO Series Digital Oil Temperature Gauge - 100-300°F
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389634
Part#: 216EVOOT.F
Ships in 1 Business Day
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B58 Gen2 3.0L (B58TU / ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:40004847
Part#: JB4-B58-GEN2
Ships on Jul 21, 2026
$ 599.00 USD
Free Shipping on orders $49 and up
$ 599.00 USD
Free Shipping on orders $49 and up
The JB4 is the most advanced and highly featured tuning system available for your B58 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58; gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. FEATURES AND BENEFITS Power gains of up to 50hp to the wheels on a stock vehicle Quick Plug & Play Installation CANbus integration offering unrivaled tuning features and performance Runs as smoothly as stock, this is how your BMW should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked, can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required. Note for 2018+ G chassis vehicles with the digital dash layout, Burger Motorsports have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.
Show More Show Less
EVO Series Digital Water Temperature Gauge - 80-280°F
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389626
Part#: 216EVOWGWT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:21209837
Part#: BMS-ETLN20
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts
Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 7 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less

Prosport EVO Series Digital Boost Gauge - 30 InHg/35 PSI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389614
Part#: 216EVOWGBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Green or White display
Show More Show Less
Autel Universal Rubber TPMS Sensor - Set Of Four
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping
EVO Series Digital Oil Temperature Gauge - 100-300°F
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389627
Part#: 216EVOWGOT.F
In Stock
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less


45mm Electric Boost Gauge - 30inHg~30 PSI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389622
Part#: 175CLSMARBO-R.PS
In Stock
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping

In boosted applications, it's crucial to know the amount of boost pressure you are carrying in order to optimize performance. This 45mm boost gauge from Prosport is the best way to do just that. Featuring a black face, with amber back lighting it will portray your information accurately without blinding you in the process. This guage is designed to used precision electric sensors, so you get the most accurate reading every time. 

Key Features:

  • 270 degree dial sweep
  • Track tested and race proven
  • Full gauge sweep on start up
  • Black face, red needle, amber backlit
  • 30inHg to 30PSI
  • 45mm diameter
  • Includes: Tubing kit, T-Adapter, Electric Sender, quick connect pigtail wiring, Decal and Instructions.
Show More Show Less
Prosport EVO Series Digital Boost Gauge - 30 InHg/35 PSI
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389613
Part#: 216EVOBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Blue or Red display
Show More Show Less
Prosport Electrical Oil Pressure Gauge - 0-100 Psi
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:584307
Part#: 216BFWAOPSM.PSI
In Stock
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

  • Improves engine monitoring beyond factory gauge capabilities
  • Early detection of potential issues for preventive maintenance
  • Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
  • Compatible with BMW models for easy installation and reliable performance
  • Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.
Show More Show Less

2 Gallon Low Profile Universal Methanol Tank
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less

EVO Series Universal Digital Water Temperature Gauge - 80-280°F ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389633
Part#: 216EVOWT.F
In Stock
$ 78.99

This product was last offered at the strikethrough price on
07-01-2026

$ 71.99 USD
Limited Qty Sale
Free Shipping
$ 78.99

This product was last offered at the strikethrough price on
07-01-2026

$ 71.99 USD
Limited Qty Sale
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or red)
Show More Show Less
52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:587021
Part#: 216BFWAEBOSM.PSI
Ships in 1 Business Day
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

  • Accurately monitors boost pressure from 30inHg to 30 PSI
  • Stylish amber and white display for clear visibility
  • Enhances vehicle performance monitoring capabilities
  • Easy installation process
  • Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Show More Show Less

EVO Series Digital Volt Gauge - 8-18v
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389632
Part#: 216EVOVO
In Stock
$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD
Limited Qty Sale
Free Shipping
$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD
Limited Qty Sale
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Blue or red)
Show More Show Less
EVO Series Digital Fuel Pressure Gauge - 0-100 Psi
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389624
Part#: 216EVOWGEFP.PSI
Ships in 1 Business Day
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (0-100 PSI) 
  • Instructions
  • Premium fuel sender
  • Mounting hardware
  • Decals
  • Green or white display
Show More Show Less

52mm Prosport Electrical Boost Gauge - Clear Lens/White LED
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:31191884
Part#: PSTEBO270-12
In Stock at Vendor
$ 71.99 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Boost Gauge - Clear Lens/White LED is an essential tool for any supercharged or turbocharged vehicle. This precision gauge allows drivers to monitor boost levels with accuracy and style, ensuring peak performance and optimal engine tuning.

  • Accurate Boost Monitoring: Provides precise readings of boost pressure, essential for maintaining peak performance.
  • Clear Lens: Offers a clear view of gauge readings under various lighting conditions.
  • White LED Backlighting: Ensures easy readability and a stylish appearance, even in low-light environments.
  • Durable Construction: Built to withstand high-performance conditions and continuous use.
  • Easy Installation: Designed for straightforward installation with included mounting hardware.
Show More Show Less

52mm Electric Boost Gauge - 30inHg~30 PSI Blue/White
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:31589423
Part#: 216BFWBEBOSM.PSI
In Stock at Vendor
$ 80.99 USD
Free Shipping on orders $49 and up
Prosport Fiberglass Exhaust Wrap - White - 2" x 50'
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:385017
Part#: HEA-WRAPKIT-WHT
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.
Show More Show Less
Prosport EVO Series Digital Wideband Air Fuel Gauge Kit - 10.0:1 To 2...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389623
Part#: 216EVOWGAFRWB4.9
Ships in 1 Business Day
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less


EVO Series Digital Volt Gauge - 8-18v
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Prosport Performance - Corporate Logo
T#:389625
Part#: 216EVOWGVO
Ships in 1 Business Day
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Volt Gauge (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Green or White)
Show More Show Less
Autel Autolink AL329
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader