Burger Motorsports for BMW 5 Series G30 (2017+)

Port Injector Plugs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Spark Plug Gapper Tool BMS Billet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Titanium Coolant Bleeder Screw Upgrade

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621407

Part#: BMS-TCBS

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Replace your fragile OEM plastic coolant bleeder screw, which is prone to cracking and failure, with a premium titanium upgrade built for strength and style under the hood. Factory plastic components weaken over time due to constant heat cycles, leading to brittleness and potential failure. Our titanium replacement delivers superior durability, being twice as strong as aluminum yet 45% lighter than steel, ensuring unmatched resilience and long-term reliability for your coolant system. More than an upgrade, it’s a must-have for engine longevity. CNC-machined from solid titanium, each screw features a laser-etched Burger Motorsports logo and is hand-burned to create unique color patterns—no two are alike. A heavy-duty replacement O-ring is included for a perfect fit.

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...

For earlier vehicles with the Gen1 B58 (B58A) - not compatible with the B58TU (B58D) en...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43378539

Part#: B58G1OFH

In Stock

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

Burger Motorsports B46/B48 Billet Performance Intake System - Blue Fi...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556809

Part#: BMS-G-INT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug-and-play air intake system unlocks up to 8whp to the wheels from your B46/B48/B58 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for strength and a clean look. Includes a reusable high-flow inverted cone filter. The OEM cold air intake tube and insulating base remain fully functional. Installation takes only minutes and is fully reversible.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

For later vehicles with the Gen2 B58 (B58TU/B58C/B58D) engine and without the Motorspor...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43378540

Part#: B58G2OFH

In Stock

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40004848

Part#: JB4-B48

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

JB+ Quick Install Tuner - B58 - 3 Wire

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012607

Part#: JBPLUS-B58-3W

In Stock

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW F22/23 F3X G01/G02 Gen1...

For models with the earlier Gen1 B58 engine only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:587915

Part#: JB4-B58

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B58 and B48 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58 and up to 40hp to the wheels (55hp crank) for a B48, gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. The JB4 automatically detects between the B46, B48, and B58 models at boot up making installation and setup a snap.

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 6 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Billet Oil Filter Cap

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045500

Part#: BMS-BOFC

In Stock

Starting at $ 79.00 USD

Add to Wish List

Starting at $ 79.00 USD

Add to Wish List

The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA

Show More Show Less

BMS Elite Charge Pipe - BMW Gen2 B58 3.0L (B58TU / B58C / B58D) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209828

Part#: B58G2CP

Back Ordered

Starting at $ 299.00 USD

Add to Wish List

Starting at $ 299.00 USD

Add to Wish List

Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing

Show More Show Less

BMW Jack Pad Silver - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

JB+ Quick Install Tuner - B48 - 3 Wire

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012609

Part#: JBPLUS-B48-3W

In Stock

$ 238.99 USD

Add to Wish List

Qty

$ 238.99 USD

Add to Wish List

The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

Burger Motorsports JB4 Tuner - N63R - BMW G-Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For G-Chassis Vehicles Only; Not for sale or use in California

T#:600240

Part#: JB4-N63R-G

Ships in 1-2 days

$ 779.00 USD

Add to Wish List

Qty

$ 779.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51848519

Part#: G12B48CP

Ships on Jul 15, 2026

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Burger Motorsports Aluminum Charge Pipe Upgrade with TurboSmart BOV &...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171969

Part#: B58-ACP-TSBOV

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27138580

Part#: BMSG30SB

Ships on Jul 15, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

BMS Silicone Intake Pipe Hose Upgrade - BMW G30 G11/12 G14/15/16 G01/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993584

Part#: BMSGSIPU

Ships on Jul 15, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports silicone intake pipe upgrade for the B58 BMW smooths the airflow from the intake to the factory turbo inlet by removing the bulky upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B58 Gen2 3.0L (B58TU / ...

For models with the later Gen2 B58 (B58TU) engine only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:40004847

Part#: JB4-B58-GEN2

Ships on Jul 15, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B58 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58; gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. FEATURES AND BENEFITS Power gains of up to 50hp to the wheels on a stock vehicle Quick Plug & Play Installation CANbus integration offering unrivaled tuning features and performance Runs as smoothly as stock, this is how your BMW should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked, can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required. Note for 2018+ G chassis vehicles with the digital dash layout, Burger Motorsports have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 15, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

BMS BMW Billet Port Injection Manifold - Gen 1 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38655164

Part#: BMS-BPIM-G1B58

Ships on Jul 15, 2026

$ 2,299.00 USD

Add to Wish List

Qty

$ 2,299.00 USD

Add to Wish List

Upgrade your factory plastic B58 intake manifold to the high-flow, high-strength aluminum Burger Motorsports Intake Manifold. Engineered for direct fitment, this precision-designed upgrade enhances durability, improves airflow, and supports high-performance builds. Key Features & Benefits: Increased airflow for improved performance Precision-machined aluminum—stronger and more durable than stock Integrated top-mount port injection bungs for optimal injector spray pattern 1/8" expansion vacuum ports—ideal for boost gauges, BOV references, or Hobbs switches Lightweight design with all factory connections for seamless installation Includes high-quality O-rings and all necessary hardware Compatible with your factory intercooler core Optional Port Injection & Fueling Upgrades Available with or without port injection hardware, including calibrated Bosch EV14 42mm fuel injectors and a plug-and-play fuel line: 550cc injectors—ideal for setups under 700whp 750cc injectors—recommended for 700-800whp builds 950cc injectors—for higher-power applications FREE $99 BMS B58 Phenolic Thermal Intake Manifold Spacer Included in the kit, this fiber-embedded phenolic spacer reduces heat transfer from the cylinder head to the intake manifold, resulting in lower intake air temperatures, denser air, and improved combustion efficiency. 🔥 Upgrade your B58 intake system today for superior strength, airflow, and performance! 🔥

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 15, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744064

Part#: GEN1B58WIS

Ships on Jul 15, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

BMS Drop-In Performance Air Filter - B48/B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857248

Part#: BMSIDIPAFB4858

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter outperforms OE quality with its layered, oiled cotton media, engineered for maximum airflow, effective contaminant filtration, and increased horsepower. This washable, reusable filter is designed to last the lifetime of your vehicle, providing a cost-effective, high-performance upgrade. With a quick and easy installation, it fits directly into the factory airbox for a seamless upgrade. Replaces OEM BMW Air Filter Part #13718577170

Show More Show Less

BMW Jack Pad Blue - Pair

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31191904

Part#: BMWJACKPADBLUE2

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

Safe Lifting: Designed for use at factory jack points to prevent damage.
Durable Construction: Made from solid billet aluminum for long-lasting performance.
Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
Non-Damaging: Does not touch or harm painted surfaces.
USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

Show More Show Less

JB4PRO Flex Fuel Add On Harness - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51883658

Part#: G1B48CPBOV

Ships on Jul 15, 2026

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Blue Filter - BMW G2X G42 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959269

Part#: B58GFMCAI-B

Ships on Jul 15, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMW 5bar Sensor - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822565

Part#: BMSB585BS

Ships on Jul 15, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS Official 3D JB4 License Plate Frame

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255921

Part#: BMSJB4LPF

Ships on Jul 15, 2026

$ 10.00 USD

Add to Wish List

Qty

$ 10.00 USD

Add to Wish List

WMI Inline Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176933

Part#: BMS-WMI-FIL

Ships on Jul 15, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Red Filter - BMW G2X G42 G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959270

Part#: B58GFMCAI-R

Ships on Jul 15, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMW Jack Pad Red - Price Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54388468

Part#: BMWJACKPADRED1

Ships on Jul 15, 2026

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

Burger Motorsports Logo Sticker Sheet (TWO PACK) - Alpine White ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255922

Part#: BMSLSS-AW

Ships on Jul 15, 2026

$ 5.00 USD

Add to Wish List

Qty

$ 5.00 USD

Add to Wish List

BMW Jack Pad Silver - Price Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30330970

Part#: BMWJACKPADSLVR1

Ships in 2 Business Days

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

Burger Motorsports B46/B48 Billet Performance Intake System - Red Fil...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993583

Part#: BMS-G-INT-R

Ships on Jul 15, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug-and-play air intake system unlocks up to 8whp to the wheels from your B46/B48/B58 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for strength and a clean look. Includes a reusable high-flow inverted cone filter. The OEM cold air intake tube and insulating base remain fully functional. Installation takes only minutes and is fully reversible.

Show More Show Less

BMW Jack Pad Red - Pair

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54388469

Part#: BMWJACKPADRED2

Ships on Jul 15, 2026

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.

Show More Show Less

Project Cars

SELECT YOUR BMW

Burger Motorsports for BMW 5 Series G30 (2017+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results