Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

The Schwaben aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

From the factory, B58-equipped BMWs are designed to be refined and quiet. To achieve this, BMW equipped the intake tract with a bulky plastic resonator designed to cancel out the natural induction sounds of the engine. While great for a silent commute, it robs the enthusiast of the satisfying "whoosh" noise and turbo spool that make the B58 one of the most exciting engines on the market today.

Our Intake Resonator Delete Pipe is the simplest, most cost-effective way to bring that personality back to your BMW without shelling out hundreds for a full intake system. By deleting the OEM intake resonator assembly, you'll experience a drastic increase in induction noise and blow-off sounds. This hose also removes the internal chambers that create turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger. In short, this fully-reversible delete pipe is a must-have upgrade for owners who wish to keep their factory airbox while dramatically increasing induction noise.

Features:

Increases audible induction noise and turbocharger "blow-off" sounds
Removes the internal chambers that cause turbulence in the factory pipe, ensuring smooth, consistent airflow to the turbocharger
Precision-engineered to look like it belonged there from the factory
Perfect for those who want better sound and flow while keeping the superior filtration and heat-shielding of the OE BMW airbox
Design:

Durable four-ply fiber-reinforced silicone construction matches the exact dimensions of the factory air intake elbow (13717643302), ensuring a perfect fit
T304 stainless steel German-style worm gear hose clamps ensure a consistent seal and optimal corrosion resistance
Fully-reversible - no permanent modifications necessary!
Product Development:

Our B58 Intake Resonator Delete Pipe was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

High Performance air filter, replacement filter for Turner Motorsport intakes, or great for your custom intake project. 

Filter Dimension 

• 178MM length 
• 127MM base
• 75MM inlet 

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (we make 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

This kit is for purchase only. It's perfect for shops or racecars where changing wheels or brakes is common. We also have kits that are available for rent.

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

• High-quality silicone construction for durability
• Precision-engineered design ensures a perfect fit
• Versatile solution for various automotive projects
• Enhances performance and reliability
• Compatible with BMW and other vehicles

Turner Motorsport Replacement Air Filter Element

Discover superior airflow and filtration efficiency with the Replacement Air Filter Element from Turner Motorsport. Engineered for use in various Turner Motorsport Luft-Technik or Kohlefaser Luft-Technik intake systems, this custom-spec'd air filter delivers optimal performance.

Benefits:

• High-flow design for optimal airflow
• Reusable cotton gauze construction
• Precision engineering and testing by Turner Motorsport
• FARO laser scanning, SolidWorks 3D CAD modeling, and in-house 3D printing for quality assurance
• In-house Superflow SF-750 Flowbench tested for 475 CFM at 10" H20
• Dimensions: Flange ID - 3.125", Flange Height - 1.50", Base OD - 5.0", Filter Height - 7.0", Top OD - 4.5"

Upgrade your air filtration system with the Turner Motorsport Replacement Air Filter Element, meticulously designed for performance and longevity.

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

• Key Features:
• Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
• Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
• Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
• Serviceable: Easily removable baffle plates and drain plug for cleaning.
• Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
• Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).