BMW Performance Chips & Software for BMW G32 640i xDrive B58 3.0L

The new MHD Wireless OBDII WiFi Flash Adapter V2 allows you to reliably load flash maps to your BMW including JB4 back-end flash maps faster and easier than ever before. Just pair it with your Android or Apple phone and plug it into the OBDII port when you want to flash or use any MHD features. Compatible with E, F, or G Chassis BMWs with the following engines: N54, N55, S55, B58, S58, S63, & N13

NOTE: Additional engines & vehicles may be supported with Non-MHD applications such as Bimmercode or xHP. If your engine is not listed above, please check with the app you intend to use for compatibility with your vehicle.

MHD Flash Adapter Features & Benefits

Compatible with the MHD Flashing Platform,  BimmerCode, xHP, and many other wifi diagnostic apps

Load both MHD off-the-shelf maps and custom flash maps (available for limited applications - N54, N55, S55, B58, S58, S63, N13)

Faster flash times compared to wired OBDII cable

Uses Wifi for a reliable connection

Applications

E Chassis BMW

F Chassis BMW

G Chassis BMW

BimmerCode App & Info

All you need for coding your car with BimmerCode is one of the supported MHD OBD adapters and the BimmerCode phone app - https://bimmercode.app/

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

• Fastest flash times over ENET and CANBUS
• Reliable and consistent connectivity
• Ability to configure your own WiFi password.
• 
  
  • Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
• Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
• Wireless CANBUS Support
  • Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
• NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
  • Enters ultra-low power mode if left plugged in consuming just ~20mA
• OTA updates through the new bootmod3 app
• Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
• Manual Toggle switch to fully power down the adapter
• Small form factor, considerably smaller than generic WiFi ENET adapters
• No VIN locking, can be used on multiple vehicles

Vehicles Supported:

• All BMW F and G series vehicles
• 2014+ Mini
• 2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

• OEM factory diagnostics such as ISTA and ESYS
• XHP App
• Bimmercode App
• Bimmerlink App
• ProTool App
• ...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

• Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
• Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
• Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
• High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

This boost controller was designed from the beginning to be easily installed and even easier to use. It plugs into a sensor and uses the factory DME to re-map boost, timing, and fuel maps. Changes can be made via Bluetooth, allowing you to use your smartphone to turn boost up for max performance or down for conservative driving. The app contains a live boost monitor that streams data in real time.

• Up to 40HP/50lb/ft gain
• Easy installation
• Adjust boost via free Bluetooth app
• Live, real-time streaming boost data on your smartphone
• Worth 1 point toward your Dinan badge

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install this Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a one year warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Note: Dinan's one year warranty on DINANTRONICS Sport modules covers the product itself, and not damage related to misuse or associated labor costs.