BMW Intake Parts for BMW G42 230i B46 2.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

CTS Performance Intake System - BMW G20 330i, G22/23/26 430i, G42 230...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CTS - Corporate Logo
T#:32781455
Part#: CTS-IT-946
Back Ordered
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
CTS Turbo Intake System, specifically designed for the G2X 230i, 330i, and 430i models equipped with the B46 engine. Delivering improved airflow, this intake system increases horsepower, sharpens throttle response, and enhances turbo sound—all without triggering a Check Engine Light (CEL). By replacing the restrictive factory airbox with our 6″ Velocity stack high-flow air filter ensures your engine breathes easier, resulting in better power output and smoother acceleration. A custom-fit heat shield keeps intake temperatures low by preventing engine heat from affecting the air entering the turbo. The premium construction ensures long-lasting performance, making this intake system a must-have for any enthusiast. Key Features: No CEL: Specifically engineered to prevent any Check Engine Light (CEL) issues. Increased Power: Gain horsepower and torque through optimized airflow. Enhanced Throttle Response: Experience faster, more responsive acceleration. Aggressive Sound: Enjoy the increased induction and turbo spool sound for a sportier drive. High-Flow Air Filter: Washable and reusable 6″ Velocity stack high-flow air filter. Precision-Fit Heat Shield: Reduces intake air temperatures by isolating the filter from engine bay heat. Durable Construction: Built from premium materials for reliable, long-lasting performance. Easy Installation: Direct bolt-on replacement with no modifications required. Designed for a perfect fit on the BMW G2X platform, the CTS Turbo Intake System is the ultimate upgrade for your B46 engine, offering enhanced performance, sound, and reliability—all without the worry of a CEL. Whether for daily driving or spirited runs, this intake delivers the power and sound you crave. Fitment: G20/G21 330i (B46) G22/G23 430i (B46) G26 430i (B46) G42 230i (B46)
Show More Show Less
aFe Restore Kit for Pro5R Oiled Filters
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AFE - Corporate Logo
T#:1943
Part#: 55-10460
In Stock
$ 21.00 USD
Free Shipping on orders $49 and up

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less
Dinan High Flow Drop-In Replacement Filter - BMW G2X G42 B46 B48 B58 ...
Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dinan - Corporate Logo
T#:32516358
Part#: D401-0046
In Stock
12% off MSRP $ 69.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.45 USD
Free Shipping on orders $49 and up
12% off MSRP
$ 69.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.45 USD
Free Shipping on orders $49 and up
Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation
Show More Show Less

Rein Cloth Braided Fuel/Vacuum Hose - Black - 5 Meter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:378470
Part#: N203531-5
In Stock
$ 80.05

This product was last offered at the strikethrough price on
06-09-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID

Universal High Flow Performance Air Filter - Dry (2.5" inlet) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:47644942
Part#: 003675ECS03-02
In Stock
New Item
Sale - Save 25% $ 58.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 58.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.24 USD
Free Shipping on orders $49 and up

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Show More Show Less
Rein Silicone Vacuum Hoses - Blue - 5 Meters (3.5mm ID)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:379090
Part#: 11731259996-5
In Stock
$ 38.99

This product was last offered at the strikethrough price on
03-17-2026

$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up
This silicone hose has an inner diameter of 3.5mm and outer diameter of 7.5mm, is blue in color, and arrives in a 5 Meter section that can be cut down to size.

K&N Aerosol Air Filter Cleaning Kit -
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi
K&N - Corporate Logo
T#:401641
Part#: 99-5000KT
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up

K&N Aerosol Air Filter Cleaning Kit provides a simple and effective solution to preserve and maintain your K&N air filter, ensuring it delivers optimal performance for a lifetime. This cleaning kit is specifically designed to clean and restore the airflow efficiency of your reusable air filter, saving you money by eliminating the need to purchase replacement filters.

The K&N Aerosol Air Filter Cleaning Kit includes a powerful degreaser that effectively removes dirt, grime, and contaminants from your air filter. Once cleaned, the kit’s specialized oil is used to recoat the filter, ensuring it continues to trap harmful particles while allowing maximum airflow.

Regular maintenance with this kit not only extends the life of your air filter but also enhances your engine’s performance by maintaining high air flow and exceptional filtration. Easy to use, the K&N Aerosol Air Filter Cleaning Kit is an essential tool for keeping your air filter in top condition.

  • Lifetime filter maintenance: Extends the lifespan of your K&N air filter, eliminating the need for replacements.
  • Improved engine performance: Restores airflow efficiency for optimal engine operation.
  • Cost-effective solution: Saves money by allowing you to maintain your existing air filter.
  • Easy application: Simple-to-use aerosol spray for cleaning and re-oiling.
Show More Show Less
Eventuri Filter Cleaning Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Eventuri - Corporate Logo
T#:396394
Part#: EVE-FLC
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.

Silicone Coupler - Straight 3" (76.20mm)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:376702
Part#: 003402ECS01A-06
In Stock
Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

  • High-quality silicone construction for durability
  • Precision-engineered design ensures a perfect fit
  • Versatile solution for various automotive projects
  • Enhances performance and reliability
  • Compatible with BMW and other vehicles
Show More Show Less

ECS Exact-Fit High Flow Air Filter - Oiled
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:5082399
Part#: 012054LA56-OIL
In Stock
Sale - Save 25% $ 93.99

This product was last offered at the strikethrough price on
06-14-2026

$ 70.49 USD
Free Shipping
Sale - Save 25%
$ 93.99

This product was last offered at the strikethrough price on
06-14-2026

$ 70.49 USD
Free Shipping
Dinan High Performance Intercooler Heat Exchanger - G2X G42 A90 B48 B...
Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dinan - Corporate Logo
T#:25805796
Part#: D780-0003
In Stock
11% off MSRP $ 483.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD
Free Shipping
11% off MSRP
$ 483.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD
Free Shipping
The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger that improves the overall thermal management system so everything runs cooler and more efficiently while being budget-friendly. The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock, the Dinan heat exchanger is ready, and able, to assist in extending your vehicle's ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8.7º C reduction in charge air temps with a maximum reduction of nearly 12º C over 30 successive WOT pulls General improvement to the efficiency of the thermal management system, inclusive of engine cooling 45mm thick Dinan core vs. 26.75mm thick stock cooler core 68% more cooling surface area and volume than stock Reduces the tendency to heat soak / go in to limp mode Durable bar and plate design that is less susceptible to damage from road debris Pressure tested, 100% TIG welded, Aluminum construction Direct fit replacement with no modifications required Installation Instructions: https://documents.dinancars.com/d780-0003.pdf NOTE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less
Universal 10AN ORB To 3/8" Barb
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Radium Engineering - Corporate Logo
T#:31522993
Part#: RAD20-0530
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up


12.0" 3.75mm (5/32") ID Black Silicone Vacuum Hose
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:19825269
Part#: 2101
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
06-14-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Plastic Vacuum Tubing Kit - black - 8 Feet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:360488
Part#: 5097T321-8FT-A
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
06-13-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
06-13-2026

$ 28.49 USD
Free Shipping on orders $49 and up

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

  • Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
  • 2.3mm Inner Diameter: Designed to meet specific engine requirements.
  • Black Color: Blends seamlessly with the engine components.
  • 8-Foot Section: Provides flexibility to cut the hose to the required length.
  • Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Show More Show Less
Dinan Carbon Fiber Cold Air Intake Kit - G20/22/23/26 3 & 4 Series B4...
Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dinan - Corporate Logo
T#:5567102
Part#: D760-0059
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
In the quest to be all things to all people at an attractive price point the 430i/330i has been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 430i/330i comes with a utilitarian and lifeless air box swaddled by seemingly unfinished braces and housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give 430i/330i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time the Dinan kit unveils a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of the semi-open design. In order to accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry about the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased flow and sound, the outwardly visible system is made of immaculate carbon fiber so under-hood appeal is vastly improved over its drab and utilitarian beginnings. In and of itself, making it worth the price of admission. Features: Outflows factory intake by 58% or more. Enjoyably louder, sportier sound. Beautifully crafted carbon fiber construction (lid and tube). Improved throttle response. Larger volume airbox (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Compatible with all G2X X30i's with and without factory bracing. Quick and easy installation.
Show More Show Less

K&N Air Filter Recharge Kit - Aerosol
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi
K&N - Corporate Logo
T#:401640
Part#: 99-5000
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up
Preserve & maintain your air filter for a lifetime like it was designed to be used

Universal Throttle Body Coupler - 45 Degree 2.5" (63.50mm)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:382969
Part#: 003402ECS03A-16
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

  • High-quality silicone couplers and elbows for BMW projects
  • Precision-engineered for reliability and performance
  • Versatile solution for intercooler installations, custom intake systems, and more
  • Ensures durability and longevity for your automotive projects
Show More Show Less
Dinan PEX Cold Air Intake - G2X B46
Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dinan - Corporate Logo
T#:21933039
Part#: D760-0070
Ships in 4 Business Days
$ 439.95 USD
Free Shipping
$ 439.95 USD
Free Shipping
Looking for more, for less? The all new G2x/G4x x30i PEX Intake delivers all the performance and sound benefits as its carbon fiber sibling -- just with less showmanship -- resulting in the best dollar-per-horsepower B46/B48 intake system available from Dinan. In the quest to be all things to all people at an attractive price point the x30i's have been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 230i/330i/430i comes with a utilitarian and lifeless air box swaddled by seemingly unfinished braces (where applicable) and housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give x30i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan PEX intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc.). At the same time revealing an enhanced OEM-like appearance that blends seamlessly with surrounding factory plastic under hood components, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. While increased flow and sound are the stars, the modest PEX construction fuses effortlessly into the factory engine bay for a reserved visual that despite basic materials still manages to draw attention. It's an economical solution to form and function for a vehicle that permeates both. Features: Outflows factory intake by 58% or more Enjoyably louder, sportier sound High heat deflection PEX construction and an OEM look Improved throttle response Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Compatible with all G2x/G4x x30i's with and without factory bracing Quick and easy installation NOTE: This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA
Show More Show Less

BMC Filter Cleaning Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BMC - Corporate Logo
T#:590913
Part#: WA250-500
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Rein Silicone Vacuum Hoses - Black - 5 Meters (3.5mm ID)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rein - Corporate Logo
T#:51848535
Part#: 51731257971-5M
In Stock at Vendor
New Item
$ 38.66 USD
Free Shipping on orders $49 and up
This silicone hose has an inner diameter of 3.5mm and outer diameter of 7.5mm, is black in color, and arrives in a 5 Meter section that can be cut down to size.

Pro Dry S Restore Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AFE - Corporate Logo
T#:18766692
Part#: 90-10601
In Stock
$ 21.00 USD
Free Shipping on orders $49 and up

46.5mm To 61.0mm Silicone Coupler - Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:28570863
Part#: 017623ECS08A
In Stock
Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
06-14-2026

$ 24.74 USD
Free Shipping on orders $49 and up

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

  • Durable silicone construction
  • Smooth interior surface for efficient airflow
  • Flexible and reinforced design prevents leaks
  • Secure fit for reliable performance
  • Hassle-free installation
Show More Show Less
BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:51848519
Part#: G12B48CP
Ships on Jul 1, 2026
New Item
$ 299.00 USD
Free Shipping on orders $49 and up
$ 299.00 USD
Free Shipping on orders $49 and up
The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.
Show More Show Less
K&N Performance Engine Air Filter - A90 Supra
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
K&N - Corporate Logo
T#:588009
Part#: 33-3136
Ships in 2 Business Days
$ 83.99

This product was last offered at the strikethrough price on
01-20-2026

$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping


BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:376708
Part#: 003402ECS01A-03
In Stock
Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD
Free Shipping on orders $49 and up

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

  • Provides a secure and leak-free connection
  • Engineered for durability and flexibility
  • Straight design for easy installation
  • Perfect fit for BMW and MINI vehicles
Show More Show Less
Forge Motorsport Valve Service Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Forge - Corporate Logo
T#:28271173
Part#: FMDV004S
Back Ordered
$ 23.99 USD
Free Shipping on orders $49 and up
Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...
Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dinan - Corporate Logo
T#:8076777
Part#: D760-0060
In Stock
$ 204.99 USD
Free Shipping
$ 204.99 USD
Free Shipping
Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less

BMS Silicone Intake Pipe Hose Upgrade - BMW G20 G22/23/26 G42 B46/B48...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:43344819
Part#: B48GINTLET
In Stock
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports silicone intake pipe upgrade for the G chassis B46/B48 BMW removes all restrictions and smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.
Show More Show Less

Silicone Coupler - Straight 3 5/8" (92mm)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:377483
Part#: 003402ECS01A-07
In Stock
Sale - Save 40% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 40%
$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD
Free Shipping on orders $49 and up

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

  • Enhances vehicle performance
  • Durable construction for long-lasting reliability
  • Specifically designed for BMW vehicles
Show More Show Less
Eventuri B48 Black Carbon Intake System - BMW G42 230i B48/46 2.0L ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Eventuri - Corporate Logo
T#:7530044
Part#: EVEG20B48V2INT
Ships in 5 Business Days
$ 1,495.00 USD
$ 1,495.00 USD
The BMW G42 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G42 2-Series, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental to engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IATs are kept to a minimum is for a fully sealed intake. This, however, results in a restriction with only one stock air feed to draw air in from. During development, we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, our sealed airbox also has a heat shield with gold reflective to minimize the radiative heat transfer from the exhaust manifold. In order to maximize volume, we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, we use a custom-made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter. The Eventuri Difference: The G42 B48 Eventuri system uses our Patented Carbon Fiber Housings with our Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design that invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo. Each intake system consists of: Carbon Fiber Airbox with Dual Feeds Bespoke High Flow Dry Cone Filter Carbon Fiber Inlet Tube CNC Machined Temperature Sensor Mount CNC Machined Breather adapters Heat Shield with Gold Reflective Backing Laser Cut Stainless Steel Brackets Silicon Reducer with OEM Specification Clamps NOTE: ** This item is not eligible for return **
Show More Show Less

Dinan - Carbon Fiber Cold Air Intake - BMW G20 330i G42 230i B46 ...
Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dinan - Corporate Logo
T#:1362376
Part#: D760-0055
Ships in 5 Business Days
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan B48/46 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds a larger volume airbox complete with a larger cone filter that elicits a slightly more audible and sporty tone over its stock counterpart. For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four-year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.
Show More Show Less
Genuine BMW Intake Charge Pipe - BMW B46/B48 (Gen1 & Gen2)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:536510
Part#: 13718601683
Ships in 1 day
7% off MSRP $ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 523.99 USD
Free Shipping
7% off MSRP
$ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 523.99 USD
Free Shipping
This factory plastic charge pipe connects the turbocharger outlet to the throttle body. If you have a CEL for a boost leak, your original charge pipe may have split or cracked. Replace it with this Genuine BMW charge pipe to restore performance and eliminate check engine lights.
Show More Show Less

Air Filter - Insert
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Hengst - Corporate Logo
T#:16707438
Part#: E1778L
Ships on Jul 1, 2026
$ 29.99 USD
Free Shipping on orders $49 and up
A commonly missed filter is used to filter incoming air into the cabin.

Rein Silicone Vacuum Hoses - Blue - 3 Feet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:378472
Part#: 11731259996-1
In Stock
$ 6.11 USD
Free Shipping on orders $49 and up
Replace your cracked or frayed vacuum lines. 3.5mm
Nozzle Mounting adapter for hose
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
SnowPerformance - Corporate Logo
T#:31522909
Part#: 40110
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
ECS High Performance Aluminum Heat Exchanger - G2X B48 & B58 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply
Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply
ECS - Corporate Logo
T#:46890688
Part#: 050660LA01
In Stock
Sale - Save 15% $ 611.99

This product was last offered at the strikethrough price on
06-14-2026

$ 520.19 USD
Free Shipping
Sale - Save 15%
$ 611.99

This product was last offered at the strikethrough price on
06-14-2026

$ 520.19 USD
Free Shipping

BMW’s turbocharged B48 and B58 engines use a water-to-air charge air cooling system, with a front-mounted heat exchanger responsible for heat dissipation. Unfortunately, the factory single-row, 25mm core design is quick to heat soak under high load, leading to excessive intake air temperatures and potential limp mode conditions—especially on modified or track-driven cars.

ECS Tuning’s High Performance Aluminum Heat Exchanger was developed in-house as a direct replacement and upgrade over the factory unit. Designed for durability and maximum cooling efficiency, this heat exchanger is a must-have for high-horsepower street builds, spirited canyon driving, and extended track sessions. Built from TIG-welded 6061-T6 aluminum, the ECS unit eliminates the factory plastic end tanks—one of the system’s most common failure points. Each heat exchanger features CNC-machined billet aluminum hose connections, mounting flanges, and brackets for perfect OE fitment and trouble-free installation.

To drastically improve thermal efficiency, the factory 25mm single-row core has been replaced with a dual-row, 42mm performance core, offering a 72% increase in thickness. This expanded design nearly doubles coolant volume, allowing for greater heat dissipation, reduced intake air temperatures, and more consistent power delivery.

Replaces OEM Part Numbers: 17118666811, 17115A54040

Features:

6061 aluminum construction eliminates plastic end tank failure Dual-row, 42mm performance core provides 72% greater core thickness for improved cooling efficiency OE core: single-row, 25mm | ECS core: dual-row, 42mm TIG-welded 6061-T6 aluminum end tanks for exceptional strength Polished end tanks deliver a clean, high-quality finish CNC-machined billet connectors and brackets ensure seamless OE-style fitment Direct bolt-on upgrade – no modifications required

Show More Show Less


Rein Cloth Braided Fuel/Vacuum Hose - Black - 1 Meter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:363139
Part#: N203531-1
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID
K&N Air Filter Squeezable Recharge Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
K&N - Corporate Logo
T#:4099
Part#: 99-5050
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up
Cleaning and re-oiling your K&N filter will prolong its life and maintain K&N's performance advantage. You should clean your filter every year with water and K&N's cleaning solution and re-oil the filter every two years. K&N air fitlers come pre-oiled.
Show More Show Less
Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mishimoto - Corporate Logo
T#:25241773
Part#: MMCP-3035B
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

4MM Silicone Vacuum Hose - Red - 9 Feet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Forge - Corporate Logo
T#:370918
Part#: VC04R
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Conti Tech Vacuum Hose (3.5x7.5) - 1 Meter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:374693
Part#: 11727545323
In Stock
$ 8.25 USD
Free Shipping on orders $49 and up
Used in many locations on the engine
Genuine BMW Screw - 11617535850
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:36510
Part#: 11617535850
In Stock
14% off MSRP $ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.20 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.20 USD
Free Shipping on orders $49 and up
Genuine BMW SCREW

Genuine BMW Hose Clamp 07129952104
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:6533
Part#: 07129952104
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up
GENUINE BMW HOSE CLAMP 07129952104
1 Meter Vacuum Hose (3.5x7.5)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:9448313
Part#: 11727545323-1M
In Stock
$ 7.99 USD
Free Shipping on orders $49 and up
Used in many locations on the engine

Vacuum Hose (3.5x7.5) - 1 Meter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:53644191
Part#: 11727545323-1
In Stock
New Item
$ 41.99 USD
Free Shipping on orders $49 and up

Burger Motorsports Competition Cold Air Intake - White Dry Filter - B...
For Pre-2025 model years only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:46959268
Part#: BMSB48INTKD
Ships on Jul 1, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
$ 399.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.
Show More Show Less
Rein Cloth Braided Fuel/Vacuum Hose - Black - 20 Meter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:378471
Part#: N203531-20
Ships in 3 Business Days
$ 363.52 USD
Free Shipping
$ 363.52 USD
Free Shipping
Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID
Burger Motorsports Competition Cold Air Intake - Blue Oiled Filter - ...
For Pre-2025 model years only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:37689739
Part#: BMSB48INTKB
Ships on Jul 1, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
$ 399.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' Competition Cold Air Intake was designed from the ground up for street and track driving, having undergone over a year of testing before release to ensure it met the quality and performance goals set by BMS.
Show More Show Less


BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:51883658
Part#: G1B48CPBOV
Ships on Jul 1, 2026
New Item
$ 629.00 USD
Free Shipping on orders $49 and up
$ 629.00 USD
Free Shipping on orders $49 and up
Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.
Show More Show Less
Rein Silicone Vaccum Hose - Black - 65 Feet
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:378475
Part#: 5173125797120BLK
Ships in 3 Business Days
$ 175.99 USD
Free Shipping
$ 175.99 USD
Free Shipping
Replace your cracked or frayed vacuum lines. 3.5mm