BMW Engine Parts for BMW 2 Series G42 (2022+)

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 29, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Camshaft Position Sensor

2X Entries Into Our F80 M3 Sweepstakes

T#:34348685

Part#: 13627633958

Ships in 1 Business Day

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

The URO Camshaft Position Sensor is an essential component for BMW engines, providing precise data on camshaft position to ensure accurate fuel injection timing and peak engine performance. Designed to meet OEM specifications, this sensor helps optimize ignition timing, contributing to smoother acceleration, enhanced fuel economy, and overall engine efficiency. Available from Turner Motorsport, the URO Camshaft Position Sensor is the ideal replacement part for BMW owners aiming to maintain optimal performance and reliability.

Ensures accurate timing for smooth acceleration and responsive power
Optimizes fuel injection timing, improving fuel efficiency
Built to OEM standards for precise fit and easy installation in BMW models
Supports reliable ignition timing for dependable engine operation
Durable construction withstands high engine temperatures for lasting performance
Available from Turner Motorsport, a trusted source for BMW replacement parts

The URO Camshaft Position Sensor is a cost-effective solution for BMW owners looking to keep their engine running smoothly and efficiently, delivering the performance and dependability they expect.

Show More Show Less

Engine Main Bearing Kit - 0.25mm Oversized

+0.25mm

T#:26504930

Part#: MB5784SI0.25

In Stock

13% off MSRP $ 273.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Qty

13% off MSRP

$ 273.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

OEM Rein Engine Oil Pan Kit - BMW G42 G20 G22/23/26 G29 G30 B46/B48 2...

2X Entries Into Our F80 M3 Sweepstakes

T#:45791737

Part#: 11138580122

In Stock

$ 492.99

This product was last offered at the strikethrough price on
05-15-2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

If your oil pan is dented, cracked, or damaged in any other way, it is important that you replace it as soon as possible. A leaking oil pan can result in rapid oil loss and eventual oil starvation, which can destroy an engine in seconds. This kit from OEM Rein includes a new oil pan and sealant, making your oil pan replacement much easier.

Show More Show Less

15A Fuse - Priced Each

T#:375327

Part#: 61131372626

In Stock at Vendor

$ 2.03 USD

Add to Wish List

Qty

$ 2.03 USD

Add to Wish List

Mishimoto Stainless Steel T-Bolt Clamp - 3.0"

T#:31589358

Part#: MMCLAMP3

Ships in 3 Business Days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Dual End Scriber

T#:641411

Part#: KDT2979

Ships in 6 Business Days

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Sharp, tempered point scribes metal

Hose Pinchers

T#:641682

Part#: LIS22850

In Stock at Vendor

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

A must for any car enthusiast.

5150 AutoSport High Performance Rod Bearing Set - BMW B58

T#:25241792

Part#: 5150-HPRBS-B58

Ships in 3 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

CP-Carrillo Connecting Rod Set - WMC Bolts

Will Not Work With OE Pistons

T#:25473971

Part#: B58-SCR13492

Ships in 3 Business Days

$ 1,844.99 USD

Add to Wish List

Qty

$ 1,844.99 USD

Add to Wish List

CP-Carrillo connecting rods are highly esteemed in both racing and street performance communities for their exceptional quality and reliability. Renowned for their premium craftsmanship, CP-Carrillo produces top-tier products trusted by winning racers worldwide. Each connecting rod is meticulously crafted of a chrome-moly based alloy, reducing mass compared to stock rods while maintaining unparalleled strength. These rods undergo rigorous quality control measures, ensuring tight tolerances and precise balancing. Sold as matched and balanced sets, they come equipped with high-quality WMC rod bolts. To clarify, these 148 mm connecting rods are specifically designed to fit BMW B58 engines. It's important to note that they are not compatible with factory OEM pistons.

Show More Show Less

BMW Head Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15412467

Part#: 11128654269

Ships in 1 Business Day

$ 183.99

This product was last offered at the strikethrough price on
05-07-2026

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Most people will probably experience a head gasket failure at one point or another during vehicle ownership. The signs of a failed head gasket are easy to identify: Milky oil as the coolant mixes in, loss of performance, and sweet smelling, white smoke coming from your tailpipe. It usually happens when the engine is overheated or has a number of miles on it. Replace yours and get your engine running again.

Show More Show Less

Titan 4-Piece Air Blow Gun Set

T#:797045

Part#: TIT19391

Ships in 6 Business Days

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Seals and blows out clogged lines/pipes

Wire Type Spark Plug Gapper .040 to .080

T#:641655

Part#: LIS67900

Ships in 1 Business Day

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Always check gap on your new spark plugs

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 6-Port - W/ Hi-Flow ...

T#:56291039

Part#: B58G2P600HF

Ships in 5 Business Days

$ 1,295.00 USD

Add to Wish List

Qty

$ 1,295.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE600 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 550+ wheel horsepower!

Show More Show Less

ARP Main Stud Kit - B58

T#:25241787

Part#: ARP-MSK-B58

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW part numbers 11128644674 and 11127613127 for the B58; B58A, B58C, B58D engines found in varies BMW chassis One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best.

Show More Show Less

120 pc Fuse Assortment

T#:1809154

Part#: W5368

In Stock

$ 13.68 USD

Add to Wish List

Qty

$ 13.68 USD

Add to Wish List

A must for any toolbox.

Mechanical Water Pump - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:50031906

Part#: 11518482251

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Experiencing weak cabin heat at idle, overheating warnings, or unusual noises from beneath the dash? These are common signs that your water pump may need replacement. This cooling system water pump comes complete with a new water pump gasket for a proper seal. Note: One mounting thread includes a self-tapping screw.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Fuel-It! Flex Fuel Kit - G2x/G3x/G4x B58

T#:21209864

Part#: GB58BFFK

Ships on Sep 29, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

The complete kit with Bluetooth ECA includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Fuel-It! Bluetooth analyzer (iPhone or Android app must be downloaded to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning *For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

CTS Turbo B58 Turbo Heat Shield - BMW F-series/G-series B58 (B58A/B58...

T#:50899213

Part#: HS-360

Ships in 7 Business Days

15% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Qty

15% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Reduces radiant heat from the turbocharger and improves overall performance. Made from high-quality steel, this heat shield provides superior thermal protection, helping to lower intake air temperatures (IATs) and safeguard surrounding components from excessive heat.

Show More Show Less

Second Fuel Rail Kit for CSF B58 & S58 Air-to-Air Billet Manifolds ...

2X Entries Into Our F80 M3 Sweepstakes

T#:56001929

Part#: CSF8404

Ships in 3 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Eliminate fuel starvation on your high boost S58 or B58 build with this track engineered, billet aluminum secondary port injection rail built to handle extreme fueling demands.

General Purpose Hose Clamp - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:592737

Part#: 07129952104

Ships in 3 Business Days

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Engine Main Bearing Kit - Size 0.50 Oversized

+0.50mm

T#:26504944

Part#: MB7779SM0.5

Ships in 1 Business Day

13% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.99 USD

Add to Wish List

Qty

13% off MSRP

$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Pure Turbos B58 Gen2 PURE650 Turbo Upgrade - 6-Port - BMW G01/G02 G20...

T#:46650428

Part#: G2B58PURE650KT

Ships in 4 Business Days

$ 3,635.99

This product was last offered at the strikethrough price on
07-14-2026

$ 3,500.00 USD

Add to Wish List

Qty

$ 3,500.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE650 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 600+ wheel horsepower!

Show More Show Less

BMW | Screw

T#:57231520

Part#: 07119901299

Ships in 1 Business Day

$ 2.49 USD

Add to Wish List

Qty

$ 2.49 USD

Add to Wish List

M8x16

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

T#:29201087

Part#: 200.1103

Ships in 4 Business Days

$ 615.00 USD

Add to Wish List

Qty

$ 615.00 USD

Add to Wish List

Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.

Show More Show Less

CSF "No Limit" Billet Air-to-Air Competition Manifold - BMW G2X, G4X,...

2X Entries Into Our F80 M3 Sweepstakes
Lead time may vary, call for availability.

T#:52375807

Part#: CSF8401B58

Ships in 3 Business Days

$ 3,995.00 USD

Add to Wish List

Qty

$ 3,995.00 USD

Add to Wish List

The CSF "No Limit" Billet Manifold brings world-record-setting technology to the BMW B58 (Gen 1 & 2) and Toyota GR Supra platforms.

JE Piston Kit B58B30-3.228/.866/-11.1CC

T#:33746530

Part#: 371718

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons for BMW/TOYOTA B58B30 - 3.228" Bore, .866" Pin, -11.1CC Dish Volume

Boost Your Engine’s Performance with JE Forged Pistons

These JE Pistons are built for the modern high-performance BMW B58B30 and Toyota B58 engines, providing the perfect balance of strength, precision, and durability.

Engine Compatibility: Designed for BMW B58 and Toyota B58 engines, such as those found in the Toyota Supra and BMW G20 models.
Bore Size: 3.228" (82mm) ensures proper cylinder fitment for high-performance builds.
Pin Size: 0.866" (22mm) wrist pin diameter for secure, reliable piston-rod connections.
Dish Volume: -11.1cc, designed for turbocharged applications to reduce compression and prevent detonation under high boost.
Forged 2618 Aluminum: Provides excellent strength and durability, allowing the pistons to withstand extreme conditions in both street and track environments.
Lower Compression Ratio: Specifically engineered for boosted setups, ensuring optimal performance with turbo or superchargers.
High-Temperature Coatings: Thermal coatings on the piston crowns reduce heat absorption, improving durability under high-stress conditions.
Lightweight Design: Improves throttle response and engine rev speed by reducing the overall weight of the rotating assembly.

Ready for Extreme Boost Applications

Perfect for turbocharged and high-horsepower setups, these JE pistons are built to withstand extreme boost pressures, delivering reliable performance and power gains. Whether on the track or the street, these pistons will help extract maximum potential from your BMW or Toyota B58 engine.

Show More Show Less

CP-Carrillo Forged Piston Set - B58 Pro-Xtreme 82mm

T#:25241784

Part#: CP-FPS-B58-XT-HD

Ships in 3 Business Days

Starting at $ 1,599.99 USD

Add to Wish List

Starting at $ 1,599.99 USD

Add to Wish List

Curated by the expert engine builders at 5150 Autosport, this forged piston set is ready for anything you can throw at it. Curated by the expert engine builders at 5150 Autosport, this forged piston set is ready for anything you can throw at it. Tailored for the B58 engine with 148 mm Rods, these pistons are meticulously crafted to excel in high horsepower and high RPM scenarios. Constructed from aircraft-grade steel, these pistons are engineered to endure the forces produced by in high boost, high horsepower applications. Designed for extreme performance, the Pro-Xtreme Pistons can handle up to 2000 horsepower and engine speeds of up to 9,500 RPM! Each piston undergoes precision manufacturing, utilizing advanced techniques such as computer-aided design (CAD) and finite element analysis (FEA). The result is a set of Pro-Xtreme Pistons that are not only durable and reliable but also capable of withstanding the intense stresses and forces generated by high-horsepower and high-RPM engines. The Standard Compression Ratio on Most B58 Engines is 11:1 For reference. The Pro-Xtreme Piston Set Includes: Pistons PVD Rings HD Wrist Pins Locks Piston Spec Sheet Designed for extreme performance, the Pro-Xtreme Pistons can handle up to 2000 horsepower and engine speeds of up to 9,500 RPM! Each piston undergoes precision manufacturing, utilizing advanced techniques such as computer-aided design (CAD) and finite element analysis (FEA). The result is a set of Pro-Xtreme Pistons that are not only durable and reliable but also capable of withstanding the intense stresses and forces generated by high-horsepower and high-RPM engines. The Pro-Xtreme Piston Set Includes: Pistons PVD Rings HD Wrist Pins Locks Piston Spec Sheet

Show More Show Less

4 Pc. Mini Hook & Pick Set

T#:30164626

Part#: KDT84040H

Ships in 6 Business Days

$ 59.48 USD

Add to Wish List

Qty

$ 59.48 USD

Add to Wish List

Features:

Versatile Shapes: Perfect for leveraging or pulling parts, springs, and cotter pins.
Easy Access: Designed to navigate around wiring, hoses, and other engine bay obstacles.
Durable Blade: Full polish alloy steel blade resists rust and corrosion.
Ergonomic Handle: Tri-lobe dual material handle ensures strength and efficiency.
Long-Lasting: Oil and solvent resistant handle extends tool life.
Complete Set: Includes mini full hook, 90° mini hook, mini straight hook, and mini offset hook.
Organized Storage: Comes with a pouch for easy storage and organization.
High Standards: Meets or exceeds ASME standards for performance and quality.

Includes:

Mini Full Hook
90° Mini Hook
Mini Straight Hook
Mini Offset Hook

Show More Show Less

Bosch Injector Seal

T#:591890

Part#: 13537591006

Ships in 2 Business Days

$ 4.99

This product was last offered at the strikethrough price on
09-03-2026

$ 4.07 USD

Add to Wish List

Qty

$ 4.07 USD

Add to Wish List

Seal that goes from the end of the injector to the motor

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 6-Port - w/ OEM Inle...

T#:46684838

Part#: B58G2P600

Ships on Oct 15, 2026

$ 1,136.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE600 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 550+ wheel horsepower!

Show More Show Less

Vargas Ignition Coil Kit (Black) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309601

Part#: VTT-COIL-B58-BLK

In Stock

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW B46 B48 Oil Filter - Priced Each

T#:586857

Part#: 11428575211

In Stock

$ 16.63

This product was last offered at the strikethrough price on
04-09-2026

$ 15.06 USD

Add to Wish List

Qty

$ 15.06 USD

Add to Wish List

BMW B46 B48 Oil Filter is a crucial component of the oiling system in BMW vehicles. It plays an essential role in protecting the engine by filtering out contaminants that could otherwise cause premature wear and damage.

Efficient Contaminant Removal: Captures harmful metal particles and debris, preventing them from damaging engine components.
Durable Construction: Designed to last and provide reliable performance, ensuring a clean and efficient engine.
High-Quality Replacement: Offers superior filtration compared to generic aftermarket options, maintaining engine health and longevity.
Compatibility: Specifically designed for BMW B46 and B48 engines, ensuring a perfect fit and optimal performance.

For optimal engine care, Turner Motorsport recommends using the BMW B46 B48 Oil Filter to keep your engine running smoothly and efficiently.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G42 2-SERIES COUPE...

T#:21209809

Part#: ATK-BM-0008-G42-

Ships in 7 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!

Show More Show Less

Piston Ring Installer

T#:1809133

Part#: W80575

Ships in 1 Business Day

$ 17.62 USD

Add to Wish List

Qty

$ 17.62 USD

Add to Wish List

Comfortable vinyl grip handles.

Manley H-Beam Connecting Rod Set - BMW Toyota B58 Gen1 & Gen2 ...

T#:55066626

Part#: MAN-CRS-B58

Ships in 3 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Designed for the demands of high-performance builds, the Manley H-Beam Connecting Rod Set is the perfect upgrade for BMW/Toyota B58 engines. Manufactured from premium 4340 steel forgings, these rods offer a lightweight construction without compromising strength. Engineered to replace BMW part numbers #11248623419 and #11247589671, the 148mm-long rods are ideal for high-horsepower and forced-induction applications. Whether you're tuning for street, track, or drag racing, these rods can handle up to 8500 RPM and support engines producing up to 1200 horsepower. Each set includes ARP 2000 rod bolts, providing additional clamping force and reliability under extreme conditions.

Show More Show Less

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

Mubea Mechanical Accessory Belt Tensioner - BMW B46/48 B58

T#:26971839

Part#: 11288580360

Ships in 2 Business Days

$ 177.99

This product was last offered at the strikethrough price on
05-07-2026

$ 158.99 USD

Add to Wish List

Qty

$ 158.99 USD

Add to Wish List

Accessory belt tensioners provide tension to the belt drive system, ensuring the belt is able to properly turn engine accessories without slipping. If your tensioner has failed, replace it with a brand-new unit to ensure proper water pump and alternator functionality.

Show More Show Less

Kelford Camshaft Set - Gen 2 B58

T#:25938642

Part#: KEL-B58-GEN2

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen2 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 2 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen2 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 2 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen2 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 2 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

2X Entries Into Our F80 M3 Sweepstakes

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...

2X Entries Into Our F80 M3 Sweepstakes

T#:49822558

Part#: VTTB58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:47610654

Part#: 401-4701

Ships on Sep 29, 2026

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

Dorch Engineering DS3 HPFP Upgrade - G42, G20, G22, G23, G26, G01, G0...

T#:55713520

Part#: DE-582-30A

Ships in 4 Business Days

$ 2,399.00 USD

Add to Wish List

Qty

$ 2,399.00 USD

Add to Wish List

The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds

Vargas Ignition Coil Kit (Blue) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309599

Part#: VTT-COIL-B58-BLU

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Rein Right Engine Mount - G2x B46/B48

2X Entries Into Our F80 M3 Sweepstakes

T#:57086663

Part#: 22117581622

Ships in 3 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

A worn or failed engine mount allows unwanted engine deflection under hard acceleration and cornering, compromising chassis feel, shifting precision, and overall power transfer. Replacing degraded factory units with this OE-quality mount eliminates excessive engine movement and dampens high-frequency drivetrain harmonics to keep your chassis performing as intended.

Show More Show Less

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" CARR Bolts...

T#:50521388

Part#: SCR13034-6

In Stock at Vendor

$ 2,189.99 USD

Add to Wish List

Qty

$ 2,189.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes CARR bolts, a multi-phase bolt rated to 285 KSI, which are good for unlimited torque cycles if not overstretched or overheated.

Show More Show Less

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 2 Series G42 (2022+)

Sub-Categories

JE Pistons for BMW/TOYOTA B58B30 - 3.228" Bore, .866" Pin, -11.1CC Dish Volume

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results