BMW Tools & Specialty Equipment for BMW G80 M3 S58 3.0L

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Your car doesn't just have to be sitting for the season in storage to need a memory saver, sometimes just having the car up for the week could cause the battery to drain. Don't waste time sitting and resetting all of your electronics once you get your car back together, get out there and drive, let the memory saver lock in your settings.

Features: 

• Avoid loss of memory during car battery replacement

• Works with most cars with OBDII 1996 and latter

• Comes with two power leads, one hooks to a 9 volt battery (9 volt battery not included), or use the other 82" long lead that can be clamped to any 12 volt battery or power source.

• Polarity Protection, LED Power Indicators identify connection status and low battery power indicator.

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

• Safe Lifting: Designed for use at factory jack points to prevent damage.
• Durable Construction: Made from solid billet aluminum for long-lasting performance.
• Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
• Non-Damaging: Does not touch or harm painted surfaces.
• USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

The GB500+ is a powerful portable lithium jump starter delivering 6250 amps, designed to jump-start gasoline and diesel engines up to 45 liters. Its versatility extends to a wide range of vehicles and equipment, including semi-trucks up to class 8, motorhomes, coaches, buses, as well as mining, agricultural, construction, and vocational equipment with 6, 8, 12, and 16 cylinders, and beyond.

Features:

• Introducing one of the most powerful lithium jump starters yet. Designed for the largest, most challenging engine starts ever. With over 6250-amps of starting power, it can jump start gasoline and diesel engines up to 45-liters.
• Safe and easy to use battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt and 24-volt battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
• It's commercial in every way. It jump starts almost every type of vehicle and equipment, including semi-trucks (up to class 8), motorhomes, coaches, buses, mining, agricultural, construction, and vocational equipment - 6, 8, 12, and 16 cylinder - and more. Plus, an integrated digital battery voltmeter for enhanced diagnostics.
• Jump starters this powerful typically are enormous and weigh hundreds of pounds, but our high discharge lithium technology makes it the most compact and lightweight design in the world - weighing a mere 24-pounds. And its portable carrying case makes jump starting more convenient than ever.
• It's not just a lithium jump starter but also a portable power bank for recharging smartphones, tablets, and other USB devices, with an ultra-bright 2,200-lumen LED flashlight with seven light modes, including emergency strobe and SOS.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Race ramps give you an easy way to get your car in the air without jacks or boards. Especially with lowered vehicles, Race Ramps allow you to get your car off the ground even when a jack won't fit under your pinch welds.

FlatStoppers® were developed to stop flatspots from forming on vehicles stored for longer than 30 days at a time. FlatStopper's concave depressions should be used on a flat surface to prevent tire flat spotting during storage - this disperses the weight of the car more evenly onto the tire.

• Dimensions: 22.3" long x 3.5" high x 14" wide 
• Will accommodate tires up to 12" wide
• FlatStoppers® won't scratch or otherwise damage floors, and won't rust

Schwaben Shock Nut Socket - 16mm

The Schwaben Shock Nut Socket - 16mm is an essential tool for securely mounting shocks to their mounts. Designed to help achieve the correct torque specification, this socket allows the use of an internal hex wrench to hold the damper shaft in place while using a torque wrench to apply the correct torque. Properly torquing the retaining nut is crucial to prevent premature mount failure or loosening. This high-quality socket ensures a precise fit and reliable performance for maintaining your vehicle's suspension system.

Benefits:

• Allows accurate torquing of shock retaining nuts to prevent mount failure
• Designed for use with an internal hex wrench to secure the damper shaft
• Ensures proper torque application with your torque wrench
• Helps avoid premature mount failure and nut loosening
• High-quality construction for durable and reliable performance
• Compatible with 16mm shock nuts

Universal ThinkCheck M70

The Universal ThinkCheck M70 offers comprehensive diagnostic capabilities for a wide range of vehicle systems, including ECM, TCM, ABS, SRS, BCM, IC, and AC. Featuring a 10-mode function, this advanced tool provides real-time diagnostics and supports quick software updates through WiFi connectivity. Ideal for vehicles from 1996 and newer, it comes with a 5-inch touch screen and offers numerous features to streamline vehicle maintenance and diagnostics.

Benefits:

• Comprehensive Diagnostic Functions: Covers ECM, TCM, ABS, SRS, BCM, IC, and AC with 10-mode functionality.
• WiFi Connectivity: Enables one-click software updates and automatic vehicle health diagnostic reports.
• Versatile Compatibility: Supports vehicles from 1996 and newer with 16-pin OBD II protocol.
• Enhanced Data Management: Offers DTC lookup, real-time PCM data stream reading, and data record and playback.
• User-Friendly Interface: Features a 5-inch LCD touch screen and a fast 7.0 Android system for efficient operation.
• Long-Lasting Battery: Equipped with a 6100mAh battery for extended use.
• Lifetime Free Service: Includes 5 resets and free updates for ongoing maintenance.

The Schwaben 1/2" Drive Ratchet is a professional-grade tool built for durability and precision. Constructed from high-strength steel with a satin chrome finish, it is designed to resist corrosion and wipe clean easily after use.

The core of this tool is a 72-tooth gear mechanism that requires only 5° of movement to engage the next tooth. This fine-tooth design is critical for working in modern engine bays or tight chassis areas where your range of motion is severely limited.

TECHNICAL SPECIFICATIONS

Drive Size: 1/2" Length: 248mm (9.75") Gear Ratio: 72-tooth mechanism Arc Swing: 5° Material: High-strength alloy steel Finish: Satin Chrome FEATURES

Tight-Access Efficiency - a 5° arc swing allows for consistent bolt movement in cramped quarters where standard ratchets struggle Quick-Release Button - a positive-lock push-button mechanism holds sockets securely during high-torque applications and allows for immediate one-handed removal. Reliable Grip - satin finish provides a secure grip even when hands are oily, offering better control than high-polish alternatives.

The Schwaben Pitman arm and tie rod puller offers a blend of slim construction and sturdy resilience, making it exceptionally suited for accessing tight spaces while also possessing the strength to manage high torque pulls across a diverse array of cars and light trucks. Fashioned with a heat-treated pulling screw, it is fortified with a protective black finish to resist rust and corrosion, guaranteeing enduring durability. Its sleek profile facilitates easy navigation through confined areas, complemented by meticulously crafted machined threads that ensure seamless operation. Compatible with a 3/8-inch drive, this tool proves to be a versatile asset for a multitude of automotive tasks.

Features:

• 3/8-inch Drive
• Smooth machined threading
• Slim design to fit into tight spaces