Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

Experience oil leaks no more with this factory MINI gasket designed to seal the engine cover to the head of your Mini's engine. If you're tired of oil puddles and leaks down the side of your engine, this rubber gasket is the solution you need. It includes the main gasket and center spark plug tube gaskets for comprehensive coverage. For best results, ensure your engine is clean before final replacement and set the gasket on the engine block before setting the valve cover. Trust ESC Tuning to provide replacement bolts for the gasket seal, ensuring a secure fit and leak-free performance.

• Seals the engine cover to the head of the engine
• Prevents oil leaks and puddles
• Includes main gasket and center spark plug tube gaskets
• Easy to install for quick replacement
• Replacement bolts available for purchase separately

Cylinder Head Bolt Set for Engine Maintenance

When it comes to replacing a head gasket or performing internal engine work, this cylinder head bolt set is a must-have for your project. Ensuring a proper seal and assembly, these bolts are essential for refitting the cylinder head to the engine block. Keep in mind that the old bolts are not reusable, so you'll need this new set for a reliable repair. Additionally, depending on your requirements, you may need a new head gasket with either standard or plus thickness for machined heads. The set includes the following bolts:

• 10 M10x145 head bolts
• 2 M8x95 bolts
• 1 M8x35 bolt

Ensure optimal performance of your Mini's N12, N14, N16, or N18 1.6L engine with this Valve Stem Seal Kit. It includes a set of 16 seals recommended for replacement whenever installing new valves. These seals play a crucial role in sealing the valve under the spring, preventing oil leakage and maintaining proper engine function.

• Set of 16 valve stem seals for N12, N14, N16, or N18 1.6L engines
• Recommended for replacement when installing new valves
• Seals the valve under the spring to prevent oil leakage

Enhance the performance of your Mini with the ALTA Lightened Crank Pulley (LCP), engineered to increase horsepower and torque. Available in 0% Stock Sized and +2% Oversized options, this pulley is crafted from 6061T6 aluminum, weighing only 0.65 lbs. Significantly lighter than the stock crank pulley, the ALTA LCP ensures improved engine efficiency without adding vibration or noise. The +2% Oversized pulley provides additional boost for Supercharged Cooper S models, delivering safe and reliable performance. With increased belt contact, this pulley reduces wear and enhances durability, making it a must-have upgrade for Mini enthusiasts.

• Increases horsepower and torque
• Lightweight 6061T6 aluminum construction
• Available in 0% Stock Sized and +2% Oversized options
• Does not affect charging system
• Improves engine efficiency and performance

Ideal for cylinder head replacements or repairs, this comprehensive cylinder head gasket set is tailored to address all gasket and seal needs effectively. It includes crucial components such as intake and exhaust gaskets, valve stem seals, valve cover gaskets, exhaust gaskets, and throttle body gaskets. Additionally, this set features a stock size (standard thickness) head gasket, ensuring a complete solution for Mini repairs or replacements.

• Comprehensive set for cylinder head repairs/replacements
• Includes intake and exhaust gaskets
• Contains valve stem seals and valve cover gaskets
• Features exhaust and throttle body gaskets
• Equipped with a stock size (standard thickness) head gasket

ALTA Lightweight Crank Pulley (LCP) for Mini

Upgrade your Mini's performance with the ALTA Lightweight Crank Pulley (LCP), designed to increase horsepower and torque. Available in two sizes - 0% Stock Sized and +2% Oversized - this pulley is engineered for Supercharged Cooper S models. Crafted from 6061T6 aluminum, the ALTA pulley is lightweight, weighing just 0.65 lbs, providing a weight reduction of over 2.3 lbs compared to the stock crank pulley.

• Increases horsepower and torque
• Lightweight design reduces rotational mass
• Does not wear out engine bearings or oil pump
• Adds boost safely and reliably
• Improves belt contact with pulleys, reducing wear

Upgrade your Mini's engine with the Cylinder Head Gasket Asbestos-Free (0.90MM) N12 N16 1.6L Engine. This asbestos-free gasket is designed to replace a blown gasket or to accompany a performance head upgrade. Contoured to fit your Mini's engine block, this stock size gasket ensures proper alignment with all connecting routes for oil, coolant, and mechanical fastener holes when crushed under proper torque. Invest in this standard size gasket for reliable performance and engine integrity.

• Asbestos-free construction for safety
• Suitable for replacing blown gaskets or upgrading to a performance head
• Contoured to fit Mini's engine block
• Ensures proper alignment with all connecting routes
• Crushes under proper torque for a secure seal
• Standard size for compatibility with Mini engines

Crafted from machined 6061 billet aluminum, the ALTA Performance Pulley Removal Tool is specifically designed for the non-JCW MINI Cooper S, offering a convenient way to enhance power quickly and effortlessly, whether you're in a workshop or your backyard. This versatile tool ensures durability and can be utilized repeatedly with proper usage, maintenance, and care. An essential addition for MINI specialty shops, this tool is compatible with all OEM-sized pulleys, except for JCW variants. Note: A steering wheel puller is necessary for the removal of the stock supercharger pulley.

• Crafted from machined 6061 billet aluminum
• Designed for non-JCW MINI Cooper S
• Durable for repeated use with proper care
• Ideal for MINI specialty shops
• Compatible with all OEM-sized pulleys (excluding JCW)

MINI R56 N14 N18 Gasket Set Crank Case is an essential kit designed to keep your engine running smoothly by preventing leaks and maintaining optimal pressure. This comprehensive gasket set includes everything needed to seal the water pump, oil filter housing, and main seals, ensuring your MINI’s engine components remain tightly sealed and perform at their best.

• Comprehensive Kit: Includes all necessary gaskets for water pump, oil filter housing, and main seals.
• Leak Prevention: Ensures a tight seal to prevent oil and coolant leaks, maintaining engine efficiency.
• Durability: Made from high-quality materials designed to withstand extreme temperatures and pressures.
• Engine Protection: Helps maintain proper engine pressure and reduces the risk of component failure.
• Perfect Fit: Specifically designed for the MINI R56 N14 and N18 engines for a precise fit and reliable performance.

Ensure optimal engine performance for your Mini with this comprehensive Cylinder Head Gasket Set. Perfect for repairing all gaskets and seals during cylinder head replacement or repair, this set includes intake and exhaust gaskets, valve stem seals, valve cover gasket, exhaust gasket, and throttle body gasket. Benefits include:

• Comprehensive set for repairing gaskets and seals.
• Ensures proper sealing and prevents leaks.
• Compatible with Mini models.
• Facilitates cylinder head replacement or repair.

Hex Nut With Plate for MINI N14 N18 1.6L Engine

Upgrade your MINI's exhaust system with the Hex Nut With Plate for MINI N14 N18 1.6L engine. This metal nut mounts securely to the back of the flange on the exhaust manifold towards the engine, ensuring a tight and reliable connection.

Benefits:

• Securely mounts to the exhaust manifold for enhanced stability
• Compatible with MINI N14 N18 1.6L engines
• Helps maintain proper exhaust system alignment

The Exhaust Turbocharger Gasket for MINI R5X R6X effectively seals the connection between the turbo and the manifold, preventing leaks and ensuring optimal performance.

• Triangular seal design with central circular cutout
• Secured with a three-bolt system
• Features a two-ring sandwich metal gasket for durability

Mini Engine Gasket Set

Revamp your Mini's engine with this comprehensive gasket set, comprising a main multiple braced gasket and a smaller gasket designed for the oil filter housing connection. Ideal for addressing persistent oil leaks around the housing, this set ensures a secure seal to prevent future leaks. Additionally, it includes an oil filter cap housing seal for added convenience.

• Comprehensive gasket set for engine maintenance
• Ensures secure sealing to prevent oil leaks
• Addresses persistent leaks around the oil filter housing
• Includes oil filter cap housing seal for complete repair solution