BMW Maintenance & Tune-Up Parts for BMW Z4 M Roadster S54 (2003-2008)

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

• Consistent filtering across entire filter surface
• Superior ASTMF316 filtration performance
• 7 times the flow of comparable paper oil filters
• Magnetic Prefiltering
• Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
• No more cutting apart messy paper filters for trapped debris inspection
• Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This product fits the following BMWs:
1995 - 1999 E36 M3
2001 - 2006 E46 M3
1998 - 2002 E36/8 Z3 M Coupe
1998 - 2002 E36/7 Z3 M Roadster
2006 - 2008 E86 Z4 M Coupe
2006 - 2008 E85 Z4 M Roadster

The CTA 8 in 1 Oil & Lube Multi-Wrench is your go-to tool for tackling various oil drain, transfer case, and differential plugs with ease. Designed to fit most plug sizes, this versatile wrench ensures high torque applications are a breeze with its robust construction.

Key Features:

• Versatile Fit: Designed to fit most oil drain, transfer case, and differential plugs.
• Offset Head Design: Features a yoke support for handling high torque applications.
• Secure Locking: Indexing feature to lock the socket into position securely.
• Durable Construction: Nickel plating provides enhanced durability and longevity.
• Built-In Magnet: Handle includes a magnet for convenient handling of small parts.
• 6-Point Metric Design: Ensures precise fit and reduced slippage.
• Compact Size: Measures 10-1/2” (27cm) in overall length.
• Multiple Sizes: Includes sizes 12, 13, 14, 15, 16, 17, 18, and 19mm.

The Foxwell TS5000 Tablet TPMS Service Tool is a mid-level tool designed to activate OEM/Universal TPMS sensors, retrieve comprehensive TPMS sensor data including sensor ID, tire pressure, temperature, battery condition, and OE part number. With the ability to relearn 98% of sensor IDs, program FOXWELL T10-sensors to replace old sensors, and even test Remote Keyless Entry Key Fobs, this tool offers a versatile solution for automotive professionals and enthusiasts alike.

Equipped with regular hardware and software updates, the Foxwell TS5000 Tablet TPMS Service Tool enables users to address automotive issues with enhanced precision and efficiency. It strikes the perfect balance between advanced TPMS diagnostic capabilities and affordability, making it the go-to choice for enthusiasts seeking top-notch performance without the usual high costs associated with TPMS tools.

Standout Features (How does it standout from previous models, i.e. the T1000/T2000?):

• Will allow you to connect to all sensors at once and view all of their data at the same time
• Can now program sensors by copying through OBD (eliminates need for relearn, see "Programming" in description for details)
• Wireless connection to OBD2 port
• Wireless updates (One Touch Update)
• Larger screen (5.5-inch screen, T2000 is 2.8-inch)
• Updated, larger hardware (32 GB RAM, 5V battery, now offers camera for VIN-reading)
• CAN FD support
• Print TPMS sensor data on PC

More Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors in 4 Different Ways: Copy by OBD, Copy by Activation, Copy Manually, and Auto Create Sensors
• 3 TPMS Relearning Methods: OBD Relearn, Automatic Relearn, and Stationary Relearn
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Read TPMS Live Data
• Basic Code Reading capabilities using OBDII
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Free Software Updates for Life
• LIFETIME REPLACEMENT program

Programming:

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors (T2317833 or T2317834 ) to meet the specifications of a particular vehicle before new sensor installation and relearn. 4 different sensor programming methods are supported by the FOXWELL TS5000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: TS5000 will only program a replacement sensor if it is a FOXWELL T10 sensor, which can be easily found on our site.)

• Copy by OBD:
  • This method pulls the previously registered sensor ID through the vehicle's TPMS module using OBDII, and will then program the ID to the FOXWELL T10 sensor
  • This eliminates the need for a relearn by combining both steps into one
• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you can input the ID to program new sensor.
• Auto Create Sensors:
  • If you don't know the original sensor ID or your original sensor was bad, you can choose this method. Install new sensor ID--> program new sensor--> perform TPMS learning and let the car recognize new sensor

Relearning:

The FOXWELL TS5000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 95% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types of TPMS sensor relearning are offered:

• OBD Relearn:
  • Usually the most effective relearn tactic, this will allow you to connect the TS5000 to your car wirelessly using the OBDII port and placing your vehicle in a relearn mode.
• Automatic Relearn:
  • For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Be aware that this may require you to drive the vehicle at a certain speed for a designated amount of time for it to relearn.
• Stationary Relearn:
  • TS5000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool TS5000. This will usually require a specific sequence created by the vehicle manufacturer as well, such as pressing the brake a few times, turning the key, etc.

Please note that some vehicles require a combination of these relearning methods, such as needing to drive for a designated amount of time after relearning using OBD. There may also be extra steps your manufacturer uses, so please research your specific vehicle when performing a relearn!

Note:

• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability
• We recommend purchasing a Bentley Manual to use with your TPMS Tool.
• You will need to register your TPMS tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require T366829  for use 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

500ml HP600 Race Brake Fluid is specifically formulated to deliver superior performance under extreme racing conditions, where braking systems must endure very high temperatures without failure. This premium DOT 4 brake fluid from Hawk Performance exceeds OE specifications and offers exceptional stopping power and reliability.

• Premium DOT 4 Fluid: Surpasses OEM specifications for enhanced performance.
• High Boiling Points: Minimum dry boiling point of 572°F (300°C) and wet boiling point of 383°F (195°C) ensure optimal performance under extreme conditions.
• Race-Ready: Designed for high-performance racing applications, delivering consistent braking power.
• Enhanced Safety: Higher dry boiling point reduces the risk of brake fluid vaporization, providing reliable stopping power.

For racers and high-performance driving enthusiasts, this brake fluid is essential for maintaining optimal braking performance and safety.

Dinan Performance Ignition Service Kit is the ideal solution for BMW owners experiencing issues like sputtering, rough idle, hesitation during acceleration, misfires, and a check engine light. This comprehensive kit addresses common ignition system problems and ensures optimal engine performance. When one ignition coil fails, it is highly recommended to replace the spark plugs simultaneously to prevent future complications and ensure a reliable connection.

Benefits:

• Complete Ignition Solution: Includes everything needed for a thorough ignition system overhaul, promoting efficient engine operation.
• Direct Plug-and-Play: Easy installation with no modifications required, making it suitable for DIY enthusiasts and professional mechanics alike.
• Enhanced Performance: Offers up to 10% more energy output than stock components, resulting in improved acceleration and throttle response.
• Durable Design: Features a blue housing with the Dinan logo, providing a stylish upgrade while ensuring longevity and reliability.
• Prevents Future Issues: Replacing both coils and plugs helps to eliminate misfires and maintain optimal engine function.

Upgrade your BMW's ignition system with the Dinan Performance Ignition Service Kit for improved performance and peace of mind on the road.