Home
Engine Parts
Drive Belts, Pulleys, Tensioners

BMW Drive Belts & V-Belts for BMW Z4 M Roadster S54 (2003-2008)

Clear BMW chassis

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:

Turner Motorsport Power Pulley Upgrade Kit - Z4 M Roadster & Coupe ...

10X Entries Into Our F80 M3 Sweepstakes

T#:3465

Part#: PPK-MZ4

In Stock

Sale - Save 25% $ 354.99

This product was last offered at the strikethrough price on
06-13-2026

$ 266.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 354.99

This product was last offered at the strikethrough price on
06-13-2026

$ 266.24 USD

Add to Wish List

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

Additional Info

Clickhere for example dyno graph

Click here for installation instructions.

Turner Pulley Kit contents:

Turner water pump pulley

Turner power steering pump pulley

new extended length belt

instructions

This underdrive pulley kit fits the following BMW:
2006-2008 MZ4 Z4 M Coupe / Z4 M Roadster

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - Water Pump ...

10X Entries Into Our F80 M3 Sweepstakes

T#:20979672

Part#: 6PK1460

Ships on Nov 12, 2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Replaces BMW # 11287837898 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

E46 M3, Z4M ECS Tuning Aluminum Water Pump Pulley

10X Entries Into Our F80 M3 Sweepstakes

T#:367060

Part#: 002778ECS01

Ships on Dec 18, 2026

Sale - Save 10% $ 100.99

This product was last offered at the strikethrough price on
06-13-2026

$ 90.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 100.99

This product was last offered at the strikethrough price on
06-13-2026

$ 90.89 USD

Add to Wish List

Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is an aluminum version of the stock water pump pulley used on the S54 engine in the E46 M3, MZ3, and Z4M. It's the same size and uses the same hardware and the original belt as the stock plastic pulley. But the aluminum will last much longer.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - A/C - E46 M...

10X Entries Into Our F80 M3 Sweepstakes

T#:23416515

Part#: 5PK830

In Stock

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replaces BMW # 11287830946 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

S54 VAC Harmonic SuperDamper By ATI - Standard Size Crank Pulley ...

T#:639878

Part#: VAC-HPCDK-S54-ST

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Made in the USA.

Show More Show Less

Rogue Engineering Power Pulley Set - S54 - E46 M3, Z3/Z4 M

T#:553971

Part#: PP.S54

In Stock

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

VAC Motorsports Lightweight Underdrive Power Pulley Set - S54 ...

T#:27705420

Part#: VACUPPSS542ULG

Ships on Oct 15, 2026

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Crafted from high-grade domestic USA 6061-T6 Billet Aluminum, these pulleys are a testament to precision engineering. Rigorously tested through extensive hours of racing and street use, they've proven their reliability and performance excellence.

Each pulley is meticulously zero-balanced and thoroughly inspected to ensure zero-runout, guaranteeing optimal performance without compromising on reliability, noise, or vibration.

This comprehensive kit comprises a precision power steering pulley, water pump pulley, and an OE Contitech Brand drive belt. Experience a notable boost of 8hp and 7 ft/lbs. of torque to the wheels, making it ideal for stock vehicles, track cars, and even those with upgraded audio systems seeking consistent voltage output from their alternators.

Show More Show Less

Bav Auto Ratcheting Serpentine Belt Wrench Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580390

Part#: B8800077

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters

VAC Motorsports S54 Underdrive Power Pulley Set - 3 Pulley Race Set -...

T#:29533361

Part#: VACUPPSS543ULG

Ships on Oct 15, 2026

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

These pulleys are precision made from domestic USA 6061-T6 Billet Aluminum. They have undergone thousands of hours in testing, race use, and street miles accumulated to show these pulleys work great and give you the edge. Each is precision zero-balanced and inspected for zero-runout for the best performance and to have no adverse effects on reliability, noise, or vibration. This 3 Pulley Race Set is a very popular choice: just like the 2 pulley set, a precision power steering pulley and water pump pulley are included, but VAC includes an additional underdriven alternator pulley for maximum power output on the track. We have seen 11hp and 9 ftlbs to the wheels on otherwise stock racing cars with this kit.

Show More Show Less

Select Vehicle

Purpose

Category

Drive Belts, Pulleys, Tensioners

Brand

Price

Special Offers

On Sale (3)

Shipping