Bilstein Coil Over Spanner Wrench Set (Notch Style)

T#:1702

Part#: 19101X

In Stock

$ 22.03 USD

Add to Wish List

Qty

$ 22.03 USD

Add to Wish List

Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Genuine BMW Hex Bolt With Washer - 33176760336

T#:59645

Part#: 33176760336

In Stock

7% off MSRP $ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD

Add to Wish List

Qty

7% off MSRP

$ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD

Add to Wish List

Genuine BMW HEX BOLT WITH WASHER

ECS Coilover Damping Extensions - 220MM

T#:42369339

Part#: 004673LA01

In Stock

Sale - Save 10% $ 37.99

This product was last offered at the strikethrough price on
06-14-2026

$ 34.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 37.99

This product was last offered at the strikethrough price on
06-14-2026

$ 34.19 USD

Add to Wish List

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Show More Show Less

5/64" Solenoid Valve

T#:370667

Part#: 24636

Ships in 4 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Upgrade your BMW's ride control with our 5/64 valve, offering the performance of an electric valve at an affordable price. Ideal for easy height adjustment, this valve ensures efficient ride control with 1/8" FNPT threads, providing versatility and reliability for your vehicle's suspension system.

Affordable alternative to electric valves
Easy height adjustment for improved ride control
Versatile 1/8" FNPT threads
Reliable performance for BMW suspension systems

Show More Show Less

SPL Parts Rear Toe Links And Eccentric Lockouts - G29 Z4, A90 Supra ...

T#:587630

Part#: SPL-RTAEL-G29

Ships in 2 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

SPL Parts Rear Toe Arms increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings and the wide range of adjustments allow you to maximize grip on a track car and extend tire life on a streetcar.

Show More Show Less

Rear Upper Adjustable Lateral Straight Links

T#:22525950

Part#: WAS-422

In Stock

Sale - Save 21% $ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Qty

Sale - Save 21%

$ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Verkline is excited to introduce their Rear Upper Adjustable Lateral Straight Links, the culmination of an extensive development and testing process. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, FEA (Finite Element Analysis) testing, and rigorous road trials. Now, enthusiasts have the opportunity to elevate their driving experience with these high-performance parts. Notable Advantages: Bump Steer and Anti-Squat Adjustability: Users can fine-tune their vehicle's bump steer and anti-squat characteristics for enhanced handling precision. Extended Camber Adjustment Range: These links provide a broader camber adjustment range, offering greater flexibility for alignment customization. Enhanced Strength and Rigidity: Verkline's design boasts increased strength and rigidity, resulting in an overall improvement in handling performance. Consistent Geometry: With no rubber components to flex, these links maintain consistent geometry during alignment adjustments, ensuring accuracy. Efficient Weight Design: Despite the additional functionality, these links maintain a weight profile similar to OEM components. Key Features: Bolt-In Kit: Installation is seamless, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying installation. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure durability and lightweight performance. Premium Motorsport Uniballs: These components feature high-quality motorsport uniballs for reliable and high-performance articulation. Uniball Rubber Boots: Protect against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything needed for installation is included, making setup efficient and straightforward. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. Included Components: Four T45 lightweight steel arms (two pairs) Thin locking nuts High-quality motorsport uniballs Spacer sleeves for assembling the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces the following part numbers: 33326878631 / 33326878632

Show More Show Less

Rear Sway Bar End Links - G20 / G29 / A90 / A91

T#:22525948

Part#: WAS-427

In Stock

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Verkline is dedicated to delivering top-tier quality to enhance your driving experience. Their rear sway bar end links are the result of meticulous engineering, starting with a comprehensive 3D laser scan of your vehicle and CAD development of the wishbone. What sets their product apart is the extensive testing it undergoes, including Finite Element Analysis (FEA) and real-world road trials, ensuring you get a premium, high-performance solution. Key Advantages: User-Friendly Adjustability: Achieve precise corner weights without sway bar preload, maintaining consistent suspension heights for improved handling. Enhanced Strength and Rigidity: Enjoy a substantial increase in strength, which translates to superior handling performance. Replaceable High-Quality Uniballs: Say goodbye to the inconvenience of replacing the entire link due to ball joint wear. Our easily obtainable, high-quality uniballs make maintenance hassle-free. Outstanding Features: Bolt-In Installation: No need for vehicle modifications; our kit is designed for straightforward installation. Pre-Assembled Links: Ready to install out of the box, saving you time and effort. Robust High-Strength Pins: Precision-machined from high-strength steel for long-lasting durability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, ensuring top-notch quality and resilience. High-Quality Spherical Bearings and Uniballs: Offering exceptional articulation to prevent bending in any suspension setup. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of your end links. Comprehensive Mounting Kit: Everything you need for a seamless installation is included. OEM Sway Bar and Upright Compatibility: Seamlessly integrates with your existing setup. What's Included: A pair of CNC billet 6082 aluminum front sway bar links turnbuckles (two pieces) Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33506785607 / 33506785608 48830-WAA01

Show More Show Less

Rear Spring Wishbone Bushings With Lockout Kit - G20 / G29 / A90 / A9...

T#:22492999

Part#: WAS-425

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock the full potential of your BMW G20, G29, and Supra A90/A91 with Verkline's rear spring wishbone bushings. This product is the culmination of extensive development and testing, featuring 3D laser scanning, CAD design, FEA analysis, and rigorous road trials. Experience a range of benefits, including: Enhanced strength and rigidity for superior handling performance Eliminate rubber deformations, preserving precise alignment during maintenance Key Features: A user-friendly bolt-in kit that requires no vehicle modifications Pre-assembled inserts for straightforward installation Included tool to prevent wishbone bending during insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with high-quality motorsport spherical bearings Comprehensive kit with all necessary components for seamless mounting Compatible with OEM wishbone and subframe components Please note that if you use lockout plates to block wishbone movement on the subframe, it's essential to correct the camber setting within the adjustable upper bent link. What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for arm assembly with the subframe A tool to prevent wishbone bending during insert replacement Printed installation instructions Fits these BMW models: BMW G20 330i, M340i BMW G29 Z4 M40i, 30i Toyota Supra A90 / A91

Show More Show Less

Rear Upper Adjustable Lateral Bent Links - G20 / G29 / A90 / A91 ...

T#:22525951

Part#: WAS-423

Ships on Aug 6, 2026

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Verkline proudly introduces their Rear Upper Adjustable Lateral Bent Links, the result of a comprehensive development and testing program. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with these high-performance parts. Key Advantages: User-Friendly Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings, enabling precise alignment adjustments for improved handling. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these links maintain unaltered geometry during alignment adjustments, ensuring precision. Efficient Weight Design: Despite the added functionality, these links maintain a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications, ensuring a hassle-free setup. Pre-Assembled Wishbone: The wishbone comes pre-assembled with a predefined length, simplifying the installation process. CNC Machined Arm: Expertly crafted from 6082 T6 aluminum, these arms offer superior strength and durability. High-Quality Motorsport Uniballs and Spherical Bearings: These components feature top-tier uniballs and spherical bearings, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum wishbones (camber arms) Two pairs of CNC machined high-strength steel adjustment turnbuckles Thin locking nuts High-quality motorsport uniballs and spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33326881199

Show More Show Less

Front Bump Steer Adjustable Tie Rod Ends - Toyota Supra A90 / A91 ...

T#:22525957

Part#: WAS-412

Ships on Aug 6, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Verkline is proud to unveil their Front Bump Steer Adjustable Tie Rod Ends, the culmination of extensive development and rigorous testing. These cutting-edge components have undergone a meticulous journey, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with these high-performance tie rod ends. Key Advantages: User-Friendly Length Adjustability: Enthusiasts can easily fine-tune the tie rod end's length to achieve optimal corner weights without sway bar preload, ensuring even suspension heights. Enhanced Strength and Rigidity: Verkline's design guarantees increased strength and rigidity, resulting in improved handling performance. Replaceable High-Quality Uniballs: In case of ball joint wear, there's no need to replace the entire tie rod end. Verkline utilizes easily obtainable, high-quality uniballs for convenience. Noteworthy Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Links: The tie rod ends arrive pre-assembled, simplifying the installation process. Robust Full-Length Pins: Precision-machined from high-strength steel, these pins ensure durability and reliability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, these turnbuckles offer superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coil-Over Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front tie rod ends Two pairs of CNC machined Cr-Mo upright pins Thin locking nuts High-quality motorsport spherical bearings Set of pin spacers for bump steer adjustment Printed installation instructions Automotive enthusiasts can now experience the precision and performance of Verkline's Front Bump Steer Adjustable Tie Rod Ends, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. These components are designed to be compatible with OEM sway bars and coil-over setups, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Front Caster Adjustable Control Arms - Toyota Supra A90 / A91 ...

T#:22525953

Part#: WAS-410

Ships on Aug 6, 2026

$ 1,199.00 USD

Add to Wish List

Qty

$ 1,199.00 USD

Add to Wish List

Verkline is pleased to present the Front Adjustable Caster Arm, a product that has undergone extensive development and rigorous testing. This cutting-edge component is the result of a comprehensive process, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with this high-performance caster arm. Key Benefits: Effortless Caster Adjustability: Enthusiasts can easily fine-tune their caster settings using a turnbuckle jackscrew, allowing for precise alignment customization. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, delivering improved handling performance. Consistent Geometry: With no rubber components to flex, this caster arm maintains unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings for convenience. Efficient Weight Design: Despite offering additional functionality, this caster arm maintains a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings: These bearings provide increased articulation capability, ensuring reliability. Wishbone Protection: Designed to prevent extensive side-swinging, reducing the risk of collisions with the knuckle or steering rod. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (caster arms) Two pairs of CNC billet 6082 aluminum arm mounts Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts Four high-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Caster Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Rear Adjustable Toe Links With Lockout Kit - G20 / G29 / A90 / A91 ...

T#:22492998

Part#: WAS-424

Ships in 3 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Verkline proudly offers a top-notch solution for BMW G20, G29, and Supra A90/A91 enthusiasts – our high-performance rear spring wishbone bushings. These precision-engineered components have undergone meticulous development, including 3D laser scanning, CAD design, FEA testing, and demanding road trials, ensuring uncompromising quality. With this kit, you can effortlessly upgrade the second bearing (number 13 on the picture) from rubber to uniball, perfectly complementing the factory uniball (mount number 18 on the picture). Enjoy a wide array of benefits, including: Augmented strength and rigidity for unmatched handling performance Maintain precise geometry during alignments by eliminating rubber deformation Key Features: A user-friendly bolt-in kit, requiring no vehicle modifications Pre-assembled inserts for a hassle-free installation Includes a specialized tool for easy insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with top-quality motorsport spherical bearings A comprehensive kit with all necessary components for straightforward mounting Compatible with OEM wishbone and upright components What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for upright and arm assembly A tool for easy insert replacement Printed installation instructions Fits these BMW models: BMW G20 BMW G29 Toyota Supra A90 / A91

Show More Show Less

Front Lower Adjustable Control Arms - Toyota Supra A90 / A91 ...

T#:22525955

Part#: WAS-411

In Stock

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

Verkline proudly presents their Front Adjustable Camber Arm, a product that has undergone a thorough development and testing program. These state-of-the-art components have followed a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with this high-performance camber arm. Key Advantages: Effortless Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings using a turnbuckle jackscrew, enabling precise alignment adjustments. Roll Center Adjustability: These camber arms offer roll center adjustability with spacers, providing greater control over the vehicle's handling dynamics. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these camber arms maintain unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings and Uniballs: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings and uniballs for convenience. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Robust, Adjustable Xenon Sensor Mounting: Designed for versatility and durability, offering compatibility with xenon sensors. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle, Subframe, and Xenon Sensor Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (camber arms) Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts High-quality motorsport spherical bearings and uniballs Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Set of pin spacers for roll center adjustment Adjustable xenon sensor mounting Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Camber Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. To optimize roll center, it's recommended to add spacers on the front toe link, which can be achieved using Verkline's bump steer adjustable tie rod ends. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Rear Adjustable Traction Links - G20 / G29 / A90 / A91

T#:22525949

Part#: WAS-421

Back Ordered

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Following an extensive development and testing process, Verkline is pleased to offer their rear adjustable toe links to all automotive enthusiasts. The brand's unwavering commitment to quality and performance is evident in every aspect of these meticulously engineered components. Key Benefits: User-Friendly Toe Adjustability: Enthusiasts can effortlessly achieve precise toe settings, ensuring optimal alignment for enhanced handling. Lockout Plates: Included to prevent wishbone movement on the subframe, preserving desired alignment settings. Enhanced Strength and Rigidity: Verkline's design provides a significant boost in strength and rigidity, resulting in improved handling performance. Consistent Geometry: Verkline guarantees that alignment settings remain unaffected during adjustments, eliminating the effects of rubber-induced deviations. Outstanding Features: Bolt-In Kit: No modifications are required, simplifying the installation process for users' convenience. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, saving both time and effort. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure both durability and lightweight performance. Premium Motorsport Uniballs: Verkline's components feature reliable and high-performance articulation. Uniball Rubber Boots: These boots offer protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Verkline includes all the necessary components for installation, streamlining the setup process. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. What's Included: Two pairs of T45 lightweight steel arms (four arms in total) Two pairs of clevises (four clevises in total) Thin locking nuts High-quality motorsport uniballs Lightweight aluminum spacer sleeves for easy arm assembly in the rear subframe Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can experience the precision and performance of Verkline's Rear Adjustable Toe Links, allowing them to elevate their vehicle's handling and alignment for a smoother and more controlled driving experience. Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91

Show More Show Less

Front Sway Bar End Links - Toyota Supra A90 / A91

T#:22525958

Part#: WAS-413

Back Ordered

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Verkline is delighted to introduce their Front Sway Bar End Links, a product that has undergone a meticulous development process, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. This journey of innovation has led to the creation of high-performance sway bar end links, now available for automotive enthusiasts. Key Advantages: User-Friendly Length Adjustability: These end links offer effortless length adjustment, allowing users to achieve ideal corner weights without sway bar preload and ensuring consistent suspension heights. Enhanced Strength and Rigidity: Verkline's design prioritizes increased strength and rigidity, resulting in improved handling performance and better control. Replaceable High-Quality Uniballs: In the event of ball joint wear, these end links are designed to allow the replacement of easily accessible, high-quality uniballs, eliminating the need to change the entire component. Noteworthy Features: Bolt-In Kit: The installation process is straightforward and requires no modifications, ensuring a hassle-free setup. Pre-Assembled Links: The end links are conveniently pre-assembled, simplifying the installation procedure. Robust Pins: Precision-machined from high-strength steel, the pins ensure durability and longevity. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, the turnbuckles offer excellent strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, guaranteeing reliable and high-performance articulation. Uniball Rubber Boots: Designed to protect against dust and water, these rubber boots extend the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coilover Compatibility: The design seamlessly integrates with existing setups, including OEM sway bars and coilovers. Included Components: Two pairs of CNC billet 6082 aluminum front sway bar links turnbuckles Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions With Verkline's Front Sway Bar End Links, automotive enthusiasts can now experience enhanced precision and performance, allowing them to improve their vehicle's handling and suspension for a more controlled and responsive driving experience. These components are thoughtfully designed to seamlessly integrate with OEM sway bars and coilovers, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Show More Show Less

Genuine BMW Rear Axle Hex Bolt With Washer 33176760343

T#:13461

Part#: 33176760343

In Stock

5% off MSRP $ 8.75

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8.27 USD

Add to Wish List

Qty

5% off MSRP

$ 8.75

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8.27 USD

Add to Wish List

Genuine BMW Hex Bolt With Washer - M12X100-10.9
This item fits the following BMW Chassis:
E60 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E46,E63,E65,E82,E85 Z4,E86 Z4,E90,E92,E93,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW Rear Axle Self-locking Collar Nut 33326760668

T#:13492

Part#: 33326760668

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

GENUINE BMW SELF-LOCKING COLLAR NUT:339500

Genuine BMW Control Arm Hex Screw With Collar - 33326762875

T#:60317

Part#: 33326762875

In Stock

8% off MSRP $ 10.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.40 USD

Add to Wish List

Qty

8% off MSRP

$ 10.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.40 USD

Add to Wish List

Genuine BMW Control Arm Hex Screw With Collar - M14X1,5X82-10.9 This item fits the following BMW Chassis: E82,E90,E92,E93,F22,F30,F31,F32,F33,F34,F36,I12 i8

Collar Nut | Self-Locking

T#:26938507

Part#: 07119905374

In Stock

Sale - Save 41% $ 2.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1.75 USD

Add to Wish List

Qty

Sale - Save 41%

$ 2.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1.75 USD

Add to Wish List

Collar Nut | Self-Locking is a vital component used in various suspension locations on BMW and MINI vehicles. This 8mm hex nut provides reliable performance and secure fastening for suspension systems.

Self-Locking Feature: Ensures that the nut remains securely fastened under vibration and stress.
Durable Construction: Designed to withstand the demands of automotive suspension systems.
Versatile Use: Suitable for various locations in the suspension system of BMW and MINI vehicles.
Precision Fit: 8mm hex size for accurate and easy installation.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Powerflex Silicone Grease

T#:362715

Part#: PCG1

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.

Show More Show Less

Genuine BMW Hex Bolt With Washer 33306760652

T#:12732

Part#: 33306760652

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

GENUINE BMW HEX BOLT WITH WASHER FOR FRONT CONTROL ARM BUSHING BRACKET AND OTHER APPLICATIONS

Genuine BMW Hex Bolt With Washer - 31306869931

T#:213628

Part#: 31306869931

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Genuine BMW Hex Bolt With Washer M8X30-10.9
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36,

Genuine BMW Self-locking Collar Nut - 31316769731

T#:179830

Part#: 31316769731

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Genuine BMW SELF-LOCKING COLLAR NUT

Rear Lightweight Tubular Subframe

T#:22525970

Part#: WAS-401

Ships on Aug 6, 2026

$ 3,069.00 USD

Add to Wish List

Qty

$ 3,069.00 USD

Add to Wish List

Following extensive development and testing, Verkline is thrilled to introduce this cutting-edge rear subframe to the global automotive community. Crafted with precision and performance in mind, this subframe is the result of a comprehensive process that includes 3D laser scanning, CAD development, Finite Element Analysis (FEA) testing, and rigorous road trials. Key Benefits: Significant Weight Reduction: This lightweight subframe is 6.5 kg lighter than the OEM rear subframe, resulting in a remarkable 33% reduction in weight on the rear axle, delivering enhanced vehicle performance. Optimized Rear Final Drive Position: The rear final drive has been strategically repositioned 10 mm upward to alleviate stress on the C.V. joints. This adjustment safeguards against premature joint wear, especially when lowering the vehicle. Robust Mounting: The subframe has eliminated rubber mounts in favor of a single, bolted mounting position. This design choice prevents rear subframe shifts during high-load situations. Bump Steer Adjustment: The subframe is equipped with additional bump steer adjustment capabilities, enabling users to fine-tune the bump steer by adjusting the rear toe link pickup point up and down. Polyurethane Mounts: Factory rubber mounts have been replaced with race car-grade black polyurethane mounts, substantially reducing movement during torque transfer and improving drivetrain performance. Key Features: Ample Underbody Access: The subframe provides more space for underbody access, facilitating easier maintenance and upgrades. Enhanced Chassis Rigidity: Constructed with a tubular frame design using T45 tubing and S355 metal sheets, this subframe bolsters chassis rigidity for superior handling. OEM Compatibility: Verkline has retained the OEM mounting points for wishbones, sway bars, brake lines, exhaust systems, and headlight range sensors, ensuring a seamless plug-and-play installation. Quality Assurance: Designed, fabricated, validated, and tested in Poland, each piece undergoes rigorous inspection by trained staff. Weldings are rigorously checked for cracks, and the entire product is meticulously examined before shipping. Aesthetically Pleasing: In addition to exceptional performance, the subframe boasts a visually appealing design that complements the vehicle's overall aesthetics. Included Components: Pre-assembled rear subframe powder coated in black (other color options available for an additional cost). Set of steel lockout wishbone positioning shims (24 pcs.) for precise Toe Link positioning and bump steer adjustment. Bolt and nut kit for easy installation of Toe Links (Zinc plated, grade 10.9). Set of steel lockout wishbone positioning shims (8 pcs.) for precise Camber wishbones positioning. Race polyurethane mounts for the rear differential. Mounting bolt for the exhaust system (Zinc plated, grade 10.9). Comprehensive printed installation instructions for a trouble-free setup. Elevate your vehicle's performance with Verkline's New Lightweight Tubular Adjustable Rear Subframe, which offers substantial weight reduction, improved handling, and enhanced rigidity. This innovative subframe ensures a precise, responsive, and high-performance driving experience. OEM Replacements for: – 33316794865 – 33316795830 – 51206WAA04 – 51206WAA05 Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29 Key Benefits: Significant Weight Reduction: This lightweight subframe is 6.5 kg lighter than the OEM rear subframe, resulting in a remarkable 33% reduction in weight on the rear axle, delivering enhanced vehicle performance. Optimized Rear Final Drive Position: The rear final drive has been strategically repositioned 10 mm upward to alleviate stress on the C.V. joints. This adjustment safeguards against premature joint wear, especially when lowering the vehicle. Robust Mounting: The subframe has eliminated rubber mounts in favor of a single, bolted mounting position. This design choice prevents rear subframe shifts during high-load situations. Bump Steer Adjustment: The subframe is equipped with additional bump steer adjustment capabilities, enabling users to fine-tune the bump steer by adjusting the rear toe link pickup point up and down. Polyurethane Mounts: Factory rubber mounts have been replaced with race car-grade black polyurethane mounts, substantially reducing movement during torque transfer and improving drivetrain performance. Key Features: Ample Underbody Access: The subframe provides more space for underbody access, facilitating easier maintenance and upgrades. Enhanced Chassis Rigidity: Constructed with a tubular frame design using T45 tubing and S355 metal sheets, this subframe bolsters chassis rigidity for superior handling. OEM Compatibility: Verkline has retained the OEM mounting points for wishbones, sway bars, brake lines, exhaust systems, and headlight range sensors, ensuring a seamless plug-and-play installation. Quality Assurance: Designed, fabricated, validated, and tested in Poland, each piece undergoes rigorous inspection by trained staff. Weldings are rigorously checked for cracks, and the entire product is meticulously examined before shipping. Aesthetically Pleasing: In addition to exceptional performance, the subframe boasts a visually appealing design that complements the vehicle's overall aesthetics. Included Components: Pre-assembled rear subframe powder coated in black (other color options available for an additional cost). Set of steel lockout wishbone positioning shims (24 pcs.) for precise Toe Link positioning and bump steer adjustment. Bolt and nut kit for easy installation of Toe Links (Zinc plated, grade 10.9). Set of steel lockout wishbone positioning shims (8 pcs.) for precise Camber wishbones positioning. Race polyurethane mounts for the rear differential. Mounting bolt for the exhaust system (Zinc plated, grade 10.9). Comprehensive printed installation instructions for a trouble-free setup. Elevate your vehicle's performance with Verkline's New Lightweight Tubular Adjustable Rear Subframe, which offers substantial weight reduction, improved handling, and enhanced rigidity. This innovative subframe ensures a precise, responsive, and high-performance driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Red Powder Coat Finish - Toy...

T#:4840541

Part#: 450-721003-R

Ships in 4 Business Days

$ 262.00 USD

Add to Wish List

Qty

$ 262.00 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Durable Textured Red Powder Coat Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

Air Lift 3H / 3P Main Harness

T#:26038562

Part#: 26498-006

In Stock at Vendor

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

Elevate your BMW's Air Lift 3H or 3P management system with this standard wiring harness. Specifically designed to power a single compressor, it ensures seamless functionality. For those opting for dual compressors, the Air Lift 3H / 3P Second Compressor Harness is necessary for optimal performance.

Compatible with Air Lift 3H and 3P management systems
Powers a single compressor
Ensures seamless functionality
Necessary for dual compressor setup

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Blue Powder Coat Finish - To...

T#:4840540

Part#: 450-721003-L

Ships in 2 Business Days

$ 262.00 USD

Add to Wish List

Qty

$ 262.00 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Durable Blue Powder Coat Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

Front Radius Arm To Chassis Bushing - Street

T#:22064637

Part#: PFF5-5401

Ships in 2 Business Days

$ 231.99 USD

Add to Wish List

Qty

$ 231.99 USD

Add to Wish List

When it comes to enhancing the performance and ride quality of your BMW G29 Z4 or A90 Supra, aftermarket Front Radius Arm to Chassis Bushings emerge as a pivotal upgrade that you absolutely should not overlook. These high-performance automotive components bring forth a multitude of benefits, enhancing not only your driving experience but also the long-term well-being of your cherished sports car. Improved Handling and Stability: Aftermarket Front Radius Arm to Chassis Bushings are meticulously engineered to minimize suspension deflection and flex. As a result, they significantly enhance handling and stability, ensuring a more confident and controlled driving experience for your BMW G29 Z4 or A90 Supra. Vibration and Noise Reduction: Bid farewell to unwelcome road vibrations and noise. These bushings adeptly absorb shocks and vibrations, guaranteeing a quieter and more comfortable ride, even when traversing uneven terrains. Precision Steering: With the installation of these upgraded bushings, your BMW's steering system gains precision and predictability. This translates into an improved road feel, enabling you to maintain superior control, regardless of the driving conditions. Prolonged Component Lifespan: By mitigating suspension flex, the aftermarket Front Radius Arm to Chassis Bushings function as a protective barrier, shielding critical suspension components from excessive wear and tear. This proactive safeguard extends the overall lifespan of your BMW G29 Z4 or A90 Supra, equating to long-term cost savings. Cost-Effective Performance Enhancement: Opting for these aftermarket Front Radius Arm to Chassis Bushings represents a cost-effective method to optimize your sports car's performance. They provide significant improvements without necessitating a complete suspension overhaul, which proves both economically prudent and efficient. Tailored Compatibility with G29 Z4 and A90 Supra Models: These aftermarket Front Radius Arm to Chassis Bushings are meticulously designed to flawlessly fit your BMW G29 Z4 and A90 Supra, ensuring seamless compatibility and peak performance tailored to your specific vehicle. OE / OEM Cross Reference Numbers: 31106878588 Fits these BMW models: BMW Z Series G29 Z4 (2018+) Toyota A90 Supra (2019+)

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Black Powder Coat Finish - T...

T#:4840539

Part#: 450-721003-B

Ships in 2 Business Days

$ 262.00 USD

Add to Wish List

Qty

$ 262.00 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Durable Wrinkle Black Powder Coat Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

aFe CONTROL Front Suspension Brace Set - Raw Stainless Steel Finish -...

T#:4840538

Part#: 450-721003-A

Ships in 2 Business Days

$ 285.00 USD

Add to Wish List

Qty

$ 285.00 USD

Add to Wish List

Stiffen up your chassis and give your engine bay a unique look with aFe's Control fabricated Strut Braces (also known as Strut Tower Brace or STB). Made with 14-gauge steel, the I-beam design is meticulously TIG welded to form a lightweight, strong brace that will increase front-end rigidity, thus improving turn-in response. aFe Control Suspension products are engineered and manufactured in their Corona, California manufacturing facility. Features: Laser Cut, 14-Gauge 304 Stainless Steel TIG Welded I-Beam Design Grade 5 Burnt Blue Titanium Mounting Bolts Fits All Supra Models Direct-Fit Installation Requires No Modifications Proudly Made in the USA

Show More Show Less

Bilstein EVO SE Suspension Kit - BMW G29 Z4 (19-24), Toyota A90 GR Su...

For vehicles with Electronic/Adaptive Suspension

T#:43311036

Part#: 49-304619

Ships in 2 Business Days

$ 3,670.99

This product was last offered at the strikethrough price on
06-05-2026

$ 3,399.00 USD

Add to Wish List

Qty

$ 3,399.00 USD

Add to Wish List

The BILSTEIN EVO SE street performance suspension is the perfect upgrade for your OE standard electronic suspension. Plug-and-play and fun.

A90 Supra Experience Package

Call In Or Chat For Best Price!

T#:30197980

Part#: A90-SUPRA-E-B

Ships on Aug 7, 2026

$ 2,467.99 USD

Add to Wish List

Qty

$ 2,467.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

Bilstein B6 Performance Front Suspension Strut Set - Z4 2021-2019, GR...

T#:4455985

Part#: 22-304452KT

Ships on Dec 1, 2026

$ 514.00

This product was last offered at the strikethrough price on
04-30-2026

$ 498.00 USD

Add to Wish List

Qty

$ 498.00 USD

Add to Wish List

Position: Front Set Setting: Performance, for stock suspensions Bilstein B6 Performance shocks front set (left and right). Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Bilstein shocks are designed to be able to pair with the OE factory spring.

Show More Show Less

3S Air Management System With P3 Controller

T#:22591957

Part#: 27718

Back Ordered

$ 1,045.00 USD

Add to Wish List

Qty

$ 1,045.00 USD

Add to Wish List

Introducing the Air Lift Performance 3S Air Management Kit

The Air Lift Performance 3S is a groundbreaking air management kit that takes performance to the next level. This kit includes a manifold and a basic wiring harness, providing the flexibility to be installed in conjunction with separately purchased components. It is compatible with both 1/4” and 3/8” air lines, offering various kit versions to cater to different displays and switch boxes or exclusive use with the ALP3 app. Whichever version you choose, seamless integration with the ALP3 app is guaranteed.

Components to be purchased separately include:

Air springs
Water trap
Controllers (e.g., AVS switchbox)
Fittings/air lines
Compressor
Insulated copper wires in 10-, 12-, 18-, and 20-gauge
Tank wire, connectors, terminals, butt splices
Pressure switch fuse/holders
Relay
Schrader valve and blow-off valve

Additionally, there are versions of the 3S kit available with the Air Lift Performance V2 or ALP3 controller or just the smartphone app for added convenience.

Show More Show Less

AST Lowering Springs - Toyota MkV A90 Supra

T#:48091374

Part#: ASTLS-22-236

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY.

Strut Spring Compressor

T#:363968

Part#: 013892SCH01A

In Stock

Sale - Save 25% $ 60.99

This product was last offered at the strikethrough price on
05-02-2026

$ 45.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 60.99

This product was last offered at the strikethrough price on
05-02-2026

$ 45.74 USD

Add to Wish List

This spring compressor is built with ease of use and safety in mind.

MacPherson Strut Coil Spring Compressor Set

T#:383404

Part#: 013845SCH01A

Ships on Aug 24, 2026

Sale - Save 20% $ 211.99

This product was last offered at the strikethrough price on
05-02-2026

$ 169.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 211.99

This product was last offered at the strikethrough price on
05-02-2026

$ 169.59 USD

Add to Wish List

Professional Spring Compressor Kit will compress most styles of strut springs. This is a safe and efficient way to compress strut springs. This set is supplied with everything you need to get the job done like a pro. Each jaw has safety lips to eliminate slip and is designed to fit the pitch of the spring to ensure maximum surface contact between the jaws and the spring, thus eliminating the risk of the compressor slipping around the spring. The spindle is driven by a 21mm hex nut and is not designed to be used with a impact gun. Hand turn the nut with a wrench or hand ratchet.

Show More Show Less

Schwaben Strut Nut Socket - 22mm

T#:362742

Part#: 003046SCH01A-04

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Schwaben Strut Nut Socket - 21mm

T#:362741

Part#: 003046SCH01A-03

In Stock

Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 33.99

This product was last offered at the strikethrough price on
05-02-2026

$ 25.49 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Show More Show Less

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

T#:580366

Part#: B8800042

In Stock

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Schwaben Inner Tie Rod Removal/Installer Tool

T#:378871

Part#: 001293SCH01A

In Stock

Sale - Save 25% $ 61.99

This product was last offered at the strikethrough price on
05-02-2026

$ 46.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 61.99

This product was last offered at the strikethrough price on
05-02-2026

$ 46.49 USD

Add to Wish List

This special tool for inner tie rods allows removing inner tie rod without disassembling the rack and pinion.

Schwaben 21mm and 22mm Double Sided Strut Wrench

T#:396481

Part#: 017822SCH01A

In Stock

Sale - Save 25% $ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.99 USD

Add to Wish List

Both of the most popular strut nut sizes on one wrench make this wrench perfect for suspension work. Also, thanks to its stepped design, it can easily get in to tight spots. Each end has a closed design measuring at 21mm or 22mm.

Show More Show Less