BMW Engine Parts for BMW A90 MKV Supra B58 3.0L

Turner High-Performance Ignition Service Kit - Gen 1 B58 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:18269289

Part#: 12138643360B58KT

In Stock

Sale - Save 20% $ 452.99

This product was last offered at the strikethrough price on
06-14-2026

$ 362.69 USD

Add to Wish List

Qty

Sale - Save 20%

$ 452.99

This product was last offered at the strikethrough price on
06-14-2026

$ 362.69 USD

Add to Wish List

High-performance ignition kit for your Gen 1 B58 featuring spark plugs, Turner high-performance ignition coils, and dielectric grease to make sure you have no issues at your next maintenance interval! Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark). Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that gives your engine the performance and aesthetic you're looking for. All Turner Ignition coils are backed by a confidence-inspiring 2-year warranty. Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy. Features and Benefits: Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils Ignition coils backed by a 2-year warranty

Show More Show Less

VTT Gen-1 PCV CAP - B58

2X Entries Into Our F80 M3 Sweepstakes

T#:4813265

Part#: VTT-B58-PCV-CAP

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 1-2 days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

2X Entries Into Our F80 M3 Sweepstakes

T#:49822557

Part#: VTTBS58BLOCK

Ships in 7 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

ECS Tuning Billet Aluminum Oil Filter Housing Cap - B58 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:392750

Part#: 017306ECS01

In Stock

Sale - Save 15% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 130.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 130.04 USD

Add to Wish List

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

Here is a link to the original Genuine BMW oil filter cap if you are looking for that instead.

Show More Show Less

VTT F Series B58 Engine Catch Can - W/ -6 Drain Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:18236100

Part#: VTTB58CATCH1

Ships in 10 Business Days

$ 377.99 USD

Add to Wish List

Qty

$ 377.99 USD

Add to Wish List

VTT is proud to present our F Series B58 engine catch can setup. This kit includes our renowned modular catch can, a precision CNC-machined 6061 aluminum bracket, VTT CNC banjo fittings, robust 5-ply silicone hoses, and push-lock fittings. Installation is simple and takes approximately 30 minutes to 2 hours, depending on your experience, requiring the replacement of just one factory hose with the provided VTT hoses. The result is a clean, OEM-quality fit and finish. What distinguishes our kit from others is the use of high-quality AN fittings and VTT’s custom banjo adapters, delivering unmatched durability and performance.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Blue Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641130

Part#: OILCAPBLUE1

In Stock

$ 59.99

This product was last offered at the strikethrough price on
10-04-2026

$ 53.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 59.99

This product was last offered at the strikethrough price on
10-04-2026

$ 53.99 USD

Limited Qty Sale

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

VTT B58 GC Turbocharger Upgrade W/ 4" Connector And Install Kit - 2 P...

2X Entries Into Our F80 M3 Sweepstakes

T#:8773229

Part#: VTTB58GC2PORT

Ships in 10 Business Days

$ 2,094.99 USD

Add to Wish List

Qty

$ 2,094.99 USD

Add to Wish List

VTT N54, N55, N20, B58 Billet Motor Mount Inserts

2X Entries Into Our F80 M3 Sweepstakes

T#:597676

Part#: VTT-INSERT-1

Ships in 1 Business Day

$ 178.99

This product was last offered at the strikethrough price on
09-17-2026

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
09-17-2026

$ 166.99 USD

Limited Qty Sale

Add to Wish List

Instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.

Show More Show Less

Vargas Ignition Coil Kit (Red) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309604

Part#: VTT-COIL-B58-RED

Ships in 5 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Red Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641120

Part#: OILCAPRED1

In Stock

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

THINKDIAG (include 1 Free Software)

T#:2302718

Part#: 301180767

Ships in 1 Business Day

$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

OEM Accessory Belt Service Kit - B46/48 B58

10X Entries Into Our F80 M3 Sweepstakes

T#:587399

Part#: 112886137071ABKT

In Stock

Sale - Save 19% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.77 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

Show More Show Less

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Oct 27, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Universal ThinkCheck M70

T#:4347115

Part#: 303020049

In Stock

$ 264.99

This product was last offered at the strikethrough price on
08-24-2026

$ 221.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 264.99

This product was last offered at the strikethrough price on
08-24-2026

$ 221.99 USD

Limited Qty Sale

Add to Wish List

Universal ThinkCheck M70

The Universal ThinkCheck M70 offers comprehensive diagnostic capabilities for a wide range of vehicle systems, including ECM, TCM, ABS, SRS, BCM, IC, and AC. Featuring a 10-mode function, this advanced tool provides real-time diagnostics and supports quick software updates through WiFi connectivity. Ideal for vehicles from 1996 and newer, it comes with a 5-inch touch screen and offers numerous features to streamline vehicle maintenance and diagnostics.

Benefits:

Comprehensive Diagnostic Functions: Covers ECM, TCM, ABS, SRS, BCM, IC, and AC with 10-mode functionality.
WiFi Connectivity: Enables one-click software updates and automatic vehicle health diagnostic reports.
Versatile Compatibility: Supports vehicles from 1996 and newer with 16-pin OBD II protocol.
Enhanced Data Management: Offers DTC lookup, real-time PCM data stream reading, and data record and playback.
User-Friendly Interface: Features a 5-inch LCD touch screen and a fast 7.0 Android system for efficient operation.
Long-Lasting Battery: Equipped with a 6100mAh battery for extended use.
Lifetime Free Service: Includes 5 resets and free updates for ongoing maintenance.

Show More Show Less

Vargas Ignition Coil Kit (Black) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309601

Part#: VTT-COIL-B58-BLK

In Stock

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Vargas Ignition Coil Kit (Blue) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309599

Part#: VTT-COIL-B58-BLU

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT B58TU GC-MID Turbocharger Upgrade - 6-Port Manifold B58 3.0L Engi...

2X Entries Into Our F80 M3 Sweepstakes

T#:25971905

Part#: B58TUGCMID6P

Ships in 10 Business Days

$ 2,404.99 USD

Add to Wish List

Qty

$ 2,404.99 USD

Add to Wish List

Upgrade your BMW B58 engine with the VTT GC-MID Stock-650WHP (TU ONLY) turbocharger for unparalleled performance gains. VTT's turbocharger offers easy installation, eliminating core charges and long lead times associated with traditional upgrades. With enhanced design elements and OE-quality castings, this turbocharger supports over 600WHP while maintaining factory spool and connections.

All-new castings with factory restrictions removed
Full 3' turbocharger inlet size with included silicone inlet elbow
9-blade turbine and compressor wheels for increased flow and spool
Direct connection to all factory lines
Redesigned internal components for improved performance
No core charges and no long lead times
Full 12-month unlimited mileage warranty

Show More Show Less

VTT BMW G Series Billet Oil Cap - Black Anodized

2X Entries Into Our F80 M3 Sweepstakes

T#:641127

Part#: OILCAPBLK1

Ships in 10 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

VTT GC Turbocharger Upgrade - B58TU 2-Port (A90 MK5 Supra)

2X Entries Into Our F80 M3 Sweepstakes

T#:25507162

Part#: B58TU2GC

Ships in 10 Business Days

$ 1,858.99 USD

Add to Wish List

Qty

$ 1,858.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” turbocharger upgrade. We start by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC's are a drop in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side, and bearing housing only Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9-blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next-day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow As with any turbocharger upgrade it should be coupled with complimenting upgrades such as fuel system upgrades, intake, downpipe, intercooler, tune, etc. While you will see gains going from stock turbo to a GC/GC+ with no other changes, to realize the full potential of the upgrade other parts/tune must be added. The GC, GC-MID, and GC+ Come with a silicone intake tube, that will fit the stock airbox, and SOME intakes with no mods. It does not fit all, such as Injen, etc. If this is the case, you can either modify something work, or you can add the VTT MAF housing, and filter which will work with the GC inlet hose. Please be aware. This system removes the PTC heater, and it WILL register a shadow code in the DME. In our testing, this did NOT throw a check engine light. The code is only there if your scan the car. If you wish to remove the code it must be coded out.

Show More Show Less

2X Entries Into Our F80 M3 Sweepstakes

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

2X Entries Into Our F80 M3 Sweepstakes

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

Vargas Billet Motor Mount Inserts - Toyota A90/91 Supra

2X Entries Into Our F80 M3 Sweepstakes

T#:51778147

Part#: VTT-SUPRA-INSERT

Ships in 10 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

The Vargas Billet Motor Mount Inserts are the definitive answer to the A9X platform's lack of high-quality engine mounting options.

2X Entries Into Our F80 M3 Sweepstakes

T#:51848499

Part#: VTT-B58-BVC-GOLD

Ships in 10 Business Days

$ 1,879.99 USD

Add to Wish List

Qty

$ 1,879.99 USD

Add to Wish List

The VTT B58 Gen 1 Billet CNC Valve Cover in Gold is the ultimate functional upgrade for the BMW B58 engine.

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

2X Entries Into Our F80 M3 Sweepstakes

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

Vargas Billet Oil Drain Adapter - -10AN Male - BMW B58

2X Entries Into Our F80 M3 Sweepstakes

T#:52094563

Part#: VTT-FAB-040-AN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W - BMW...

2X Entries Into Our F80 M3 Sweepstakes

T#:52129729

Part#: VTT56BSENSKIT64

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.

VTT Valve Cover Gasket - BMW B58 TU

For vehicles with VTT Valve Cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52129727

Part#: VTTVCGASKB58TU

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT Gasket for the B58 TU Billet Valve Cover is an essential component designed for enthusiasts running the Vargas Billet Aluminum Valve Cover.

Vargas One Way Crankcase Breather - Toyota A90/91 Supra

2X Entries Into Our F80 M3 Sweepstakes

T#:51778145

Part#: VTT-SUPRA-BREATH

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

The VTT Billet One-Way Crankcase Breather provides a secondary vent for your A90/A91 Supra, tackling the limitations of the factory PCV system.

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672717

Part#: VTT-MAP-HARNESS

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Vargas Coolant Level Extension Harness - BMW B48/B58/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51813310

Part#: VTT-FAB-HC

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Engine Catch Can Kit - Toyota A90/91 Supra

2X Entries Into Our F80 M3 Sweepstakes

T#:51778125

Part#: VTT-SUPRA-CC-1

Ships in 10 Business Days

$ 369.99 USD

Add to Wish List

Qty

$ 369.99 USD

Add to Wish List

The VTT A90/91 Supra Engine Catch Can is an essential upgrade for any B58 owner looking to safeguard their engine’s longevity and performance.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW A90 MKV Supra B58 3.0L

Sub-Categories

Universal ThinkCheck M70

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results