Turner Motorsport for BMW Z3 (1996-2002)

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

The TMS E36/Z3 6cyl Intake Tube Plug is intended to be used in a variety of applications ranging from ASC delete, deleting the idle control valve in a car with a aftermarket engine management system, re-routing the PCV hose to a catch can, aftermarket supercharged engines, or simply plugging one of the hose provisions in the E36 6cyl intake tubes. It also works great as a coolant hose plug. The diameter of the tip is 20mm (just over 3/4"). A low profile Oetker compression clamp is included. The plug can be drilled and tapped for a small air temp/water temp sensor, pre throttle body vacuum/boost/MAP sensor barb, or water alcohol/nitrous/methanol injector or barb. Works with M50, M50TU S52, M52, S52 throttle boots and may work in other applications with a 20mm hose.

Installation Instructions / More Details

This intake tube plug can be used in a variety of ways on these BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1999-1999 E36 328is, 328ic
1995-1999 E36 M3 coupe, sedan & convertible
1997-1999 Z3 2.8 liter
1992-1995 M50 engine (2.5 liter)
1996-1999 M52 engine (2.8 liter)
1995-1995 S50 engine (3.0 liter / US engine)
1996-1999 S52 engine (3.2 liter / US engine)

Unlock the full potential of your S54’s valvetrain with our High Performance Cam Followers/Rocker Arms, built for precision, durability, and reliability in high-revving performance engines.

Crafted from forged chromoly steel and finished with a diamond-like carbon coating, these cam followers are engineered to deliver exceptional strength, reduced friction, and outstanding wear resistance, ideal for demanding street or track use. Each unit is precision-ground for consistent clearances and smooth, stable valvetrain motion at all RPMs. Despite heavy-duty construction, our design retains the same weight as the factory rocker arm, preserving OE valvetrain geometry and balance while offering superior longevity and performance.

Rocker arms wear in conjunction with the camshafts, meaning the two must be replaced simultaneously. Aftermarket and performance camshaft options (Schrick, CAT-Cams, etc.) are typically ground from softer blanks and, as a result, cannot be used with factory rocker arms. We tested our performance cam followers with aftermarket camshafts to validate compatibility, ensuring smooth, reliable, and safe operation under demanding conditions.

Features:

Forged chromoly construction for maximum strength and durability Diamond-like carbon-coated surface reduces friction, extends service life, and permits compatibility with aftermarket and performance camshaft options Precision-ground tolerances ensure consistent and quiet operation OEM weight match maintains valvetrain balance and reliability Superior wear resistance for performance and endurance applications NOTE: Rocker arms are wear items and must be replaced alongside a new set of camshafts, regardless of profile or manufacturer. Installing a new set of rocker arms onto a used set of camshafts is NOT recommended.

Kit Contents:

24 DLC-Coated Rocker Arms (required to complete both camshafts) Schwaben Magnetic Valve Shim Tool Wiseco 8.9mm Valve Adjustment Shim Set Schwaben Feeler Gauge Set Product Development: Our Turner Performance Rocker Arms are the result of advanced engineering, testing, and quality assurance by Turner’s Research & Development team. Every stage of development employs FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping for precise fitment and design validation. Performance and durability are proven through Mustang AWD 500 SE dyno testing and Superflow SF-750 Flowbench analysis, ensuring each component meets Turner’s uncompromising standards for performance and quality.

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

For many E30, E36, E28, and Z3 owners, the factory antenna is often a source of frustration. Many have stopped functioning entirely after forty years post-production. What's more, if your antenna is stuck at full height, it can ruin the clean lines of your vehicle’s rear end. The typical solution is a cheap grommet from the hardware store, which can lead to water/debris intrusion and more headaches down the road. Over the years, we've noticed the increase in demand for this modification, in addition to the issues associated with other, less optimized antenna delete pieces. Hours of research and development have culminated in a perfect-fit antenna delete plug—tailored specifically for your vintage BMW!

Our high-quality solution is engineered for durability, providing a sleek and watertight finish that restores the aesthetic of your car’s rear end while eliminating the need for an obsolete and likely disfunctional factory antenna.

Key Features:

Eliminates Factory Antenna: Solves issues associated with malfunctioning or broken antennas. Watertight Seal: This prevents water and debris from seeping into the trunk area, protecting against rust and corrosion. Enhanced Appearance: Streamlines the look of your BMW’s rear end for a more refined finish. Simple Installation: Installs in seconds without any tools required. Robust Construction: Made from quality low-density polyethylene for long-lasting durability. Precision Engineering:

The Turner Motorsport Antenna Delete was designed and rigorously tested by our in-house team of engineers in Wadsworth, Ohio. Utilizing state-of-the-art technology such as FARO laser scanning for precise reverse engineering, SolidWorks 3D CAD modeling, and extensive product testing, this delete solution offers exact fitment and top-tier quality you can trust.

• 55MM, 75MM, 90MM LENGTHS
• Black phosphorous corrosion resistant coating
• "OEM" appearance
• Full-length threads for more nut engagement in tight spaces
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.