Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

Coil Over Spring Hardware

Coil Over Spring Hardware Coil over suspensions consist of a spring mounted on the strut or shock body. The springs sit or are located by seats on the bottom and hats on the top. This is a similar arrangement as a stock strut but coil overs use a smaller diameter spring and the strut body is usually threaded for height adjustment. The top of a strut can also vary by manufacturer with the uppermost shock stem being manufactured in different ways that require special hardware. Our selection of spring seats, lock rings, and top hats has all been designed for use on various BMW coil over suspensions. Here you can find replacement parts for existing coil over kits and other spring hardware to complete your setup.
For accurate results, specify your model below.
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmtapered

Turner Motorsport
Part #: TSU9980559
Price: $35.00 (USD) 
$59.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 14mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm14mmsquare

Turner Motorsport
Part #: TSU9980007
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.25"16mmtapered

Turner Motorsport
Part #: TSU9980548
Price: $79.95 (USD) 
Ships on Aug 23, 2018
Free Shipping Free Shipping
on orders $99 and up
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmtapered

Turner Motorsport
Part #: TSU9980550
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
H&R Rear Ride Height Adjuster/Spring Perch (for 60mm I.D. springs) - E46 3 Series 1999-2005 H&R makes it easy to adjust the rear ride height on cars with 60mm ID springs (road racing springs, H&R coil over springs -- not stock springs or any sport spring). These lower spring perches fit below the spring on the rear control arm. Adjustment is made by unbolting the shock to all the spring to move freely, then turning the spring perch to raise or lower the ride height.

Sold Individually.

For more information on H&R height adjusters and coil overs, click here .

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
H&R
Part #: HR92-K-X-011A01
Price: $79.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E30, E36 60mm Upper Rear Spring Locators (pair) Upper spring mount for 60mm I.D. road racing springs. These "hats"fit on top of the 60mm spring and help to keep the springs from falling out whenthe suspension droops. Normally used with  H&R's rear spring adjusters . Also eliminates the rear upper spring pad. Spun from aluminum and a perfect fit to your E30 3-series or E36 3-series racecar. Pair = 1 for each side of vehicle.
Turner Motorsport
Part #: tsu9980004KT
Price: $79.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Lower Lock Ring (M52x1.5 Thread) This is the lock ring that snugs up against the lower spring perch and prevent the perch from moving down (affecting the ride height). It's made from light weight aluminum and with a sprocket-type adjustment collar. This is a genuine Bilstein spring perch but should also work on H&R, Moton, MCS, and other coil over bodies with M52x1.5 thread size. These are sold per ring so order one per strut/shock.
Bilstein
Part #: 411695
Price: $13.25 (USD) 
Ships on Jun 6, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.25"16mmsquare

Turner Motorsport
Part #: TSU998062A
Price: $79.95 (USD) 
Ships on Aug 23, 2018
Free Shipping Free Shipping
on orders $99 and up
Genuine BMW Eccentric Bolt M12X1,5X98 - 33321095102 - E39

Genuine BMW Eccentric Bolt - M12X1,5X98
This item fits the following BMW Chassis:
E39

Genuine BMW
Part #: 33321095102
Price: $17.19 (USD) 
$19.80 (13% off MSRP)
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Perch Adapters (Pair) - For Stock E46 M3 Springs with Turner Race Camber Plates These are upper spring plate adapters that we make for one purpose: fitting a stock-style E46 M3 spring with our Race Camber Plates. Normally we use our Street Camber Plates in that application. But we have sold a lot of camber plates over the years and someone inevitably ends up with a Race Camber Plate for their stock/H&R/Eibach springs. Our Race Camber Plates were originally designed for a smaller racing coil over spring (60mm, 2.25", 2.5") so a larger stock spring will not work. We engineered this adapter to fit inside the stock E46 M3 upper spring plate. The stock upper spring plate is actually a nice design and it has a built-in radial bearing to allow the spring to rotate around the strut. This also allows you more options when buying a camber plate - you won't have to buy new camber plates if you remove your coil overs and put the stock suspension back on.

These spring plate adapters are sold as a pair. The factory M3 upper spring plate is not included (sold separately). Add one to your order from the 'Additional Items' menu below.

These are made for a 16mm strut pin shaft and either a tapered or square strut pin base. Choose your setup in the options below.

This item fits the following BMWs:
2001-2006 E46 BMW M3
Turner Motorsport
Part #: TSU4680SPx
Price: $79.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Spring Joiners / Spring Locating Rings (Pair) This aluminum spring seat fits between upper and lower 60mm springs to "join" them together. Typically you would have a main spring on top and a tender or helper spring on the bottom (or vice-versa). The spring joiner, or locator ring, fits between the springs with a retaining lip on the inside. We like this design better than an outside spring joiner because it's lighter and there's no material sitting on the outside where a tire might come in contact with it. These are priced per pair.
H&R
Part #: ZT-I-X002A01
Price: $49.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Lower 60mm Spring Seat (M52x1.5 Thread) This is the lower spring seat for a coil over strut body and a 60mm I.D. spring. It's made from light weight aluminum and with a sprocket-type adjustment collar. This is a genuine Bilstein spring perch but should also work on H&R, Moton, MCS, and other coil over bodies with M52x1.5 thread size. These are sold per perch so order one per strut/shock.
Bilstein
Part #: 411694
Price: $19.95 (USD) 
Ships on Jun 6, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Plastic Spring Isolator This plastic ring fits between the spring and spring seat and acts as a buffer, reducing noise, vibration, and wear on the spring seat. These are designed to take abuse as the spring moves on the seat and should be considered a consumable. These are plastic and isolate the spring from hitting the aluminum seat and making noise. This will also reduce wear on the spring seat. These are sized for the 60mm spring seat found on Bilstein, H&R, Moton, MCS, and other coil over kits. Priced per ring and such a simple but effective part you should never be without!
Bilstein
Part #: 407544
Price: $1.19 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
H&R Coil Over Spanner Wrench Set H&R spanner wrenches for H&R coil over kits. This set consists of both a small wrench for the lock ring (68-75mm OD) and a large wrench for the actual perch (80-90mm OD).
H&R
Part #: TMS16514
Price: $59.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.25 Inch / 14mm Pin / Square Seat
Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.25"14mmsquare

Turner Motorsport
Part #: TSU9980225
Price: $79.95 (USD) 
Ships on Aug 23, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmsquare

Turner Motorsport
Part #: TSU998064C
Price: $35.01 (USD) 
$59.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmsquare

Turner Motorsport
Part #: TSU998063B
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Bilstein Coil Over Wrench - Pin Style - Small Bilstein Coil Over wrench for some PSS, PSS9 and PSS10 kits. Small wrench for adjusting the spring perch and lock ring on coil overs that require the M-F round pin style of adjuster (not rectangular inter-locking adjuster). May also be used with other coil over kits (H&R, Moton, JRZ, etc) that use a similar adjuster.
Bilstein
Part #: E4-XS1-Z001A00
Price: $16.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 14mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"14mmsquare

Turner Motorsport
Part #: TSU9980250
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Bilstein Coil Over Spanner Wrench Set (Notch Style) Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Bilstein
Part #: 19101x
Price: $19.90 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook