BMW Tools & Specialty Equipment for BMW E12 530i M30 3.0L

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 in
• Wide and robust frame made of high-strength steel
• Fitted with quick-lift pedal for easy reach of lifting point
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation

Specifications:

• Capacity:  2900 lb 
• Min. height:  3.15 in 
• Max. height:  28.94 in 
• Frame length:  37.01 in 
• Handle length:  37.40 in 
• Frame height:  6.30 in 
• Width:  18.90 in 
• Weight:  86 lb

46 PIECE SET:

This 1/4" set contains all the most popular tools needed to get the job done on your European car repair.

Kit Contains:

-13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 

-1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).

-2PC- 1/4" DR.50 & 100MM EXTENSIONS 

-1PC- 1/4" DR.150MM FLEXIBLE EXTENSION

-1PC- 1/4" DR.UNIVERSAL JOINT

-1PC- 1/4" DR.SLIDING T-BAR

-1PC- 1/4" DR.6" SPINNER HANDLE

-1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER

-4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM

-6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM

-3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM

-3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3

-3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3

-6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

TRIM/MOLDING SET:

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage.

Made of impact resistant plastic that will not mar surfaces as metal screwdrivers and pry bars will. Slim design for delicate work in tight areas.

Kit includes:

• Wide edge remover

• Narrow edge remover

• Pull-type remover

• Handle remover

• Upholstery clip remover

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Male & female quick-connect fittings conveniently connect the leader hoses to the long hoses, making it easy to assemble and disassemble QuickJack after the simple one-time setup.

Each flush-face, zero-leak fitting is designed to prevent hydraulic oil or ATF from leaking, ensuring your frames function properly at all times.

Male fitting does NOT attach to QuickJack power unit.

Compatible with all SLX and TL models.

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 inches
• Wide and robust frame made of high-strength steel
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation
• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

• Capacity:  4400 lbs
• Min. height:  3.15 inches
• Max. height:  19.49 inches
• Frame length:  25.98 inches 
• Handle length:  37.40 inches
• Frame height:  6.30 inches 
• Width:  16.14 inches
• Weight:  68 lbs

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 6.5" long x 1.5" tall x 4" wide

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

TORX SCREWDRIVER SET:

Handy Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners. Large grips add comfort and leverage. Handle through-holes make them easy to hang from pegboard hooks.

Entire kit packaged in a convenient molded case.

Sizes include: T10, T15, T20, T25, T27, and T30.

STANDARD SCREWDRIVER SET:

Elevate your craftsmanship with the Schwaben 6 Piece Screwdriver Set!

Crafted with precision and durability in mind, these professional-grade screwdrivers stand the test of time, ensuring reliable performance for countless projects.  Constructed from robust nickel chrome moly, these screwdrivers are built to endure rigorous use, making them reliable companions for various tasks. That's why it's backed by our LIFETIME REPLACEMENT program - because we want this set to stick with you as long as you need it to!

Features:

• Color-Coded Brilliance: Effortlessly switch between flat head and Philips heads, thanks to the intuitive color-coded design. Enhance efficiency and eliminate guesswork.
• Comfortable Control: Experience fatigue-free operation with the ergonomic handles, offering both comfort and precision for intricate tasks.
• Organized Housing: Housed in a molded tray, these commonly used screwdriver sizes are easily portable and organized, reducing the hassle of rummaging through toolboxes.
• Essential Sizes: Curated for versatility, the set includes sizes catering to delicate tasks and robust projects, covering all your needs.

Includes:

• 5.5x100mm flat head screwdriver

• 6.5x150mm flat head screwdriver

• 8x175mm flat head screwdriver

• #1x75mm Phillips screwdriver

• #2x100mm Phillips screwdriver

• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set comprises two dozen 3/8-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 63mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 63mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 8 mm - deep and standard socket
• 9 mm - deep and standard socket
• 10 mm - deep and standard socket
• 11 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT on all items in this kit!

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

• Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
• Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
• Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
• Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
• Large Base: Equipped with a 7-inch diameter base for enhanced stability.
• Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

• Specially formulated urethane rubber for durability
• Deep bilateral slots accommodate virtually all pinch weld frames
• Versatile positioning: lengthwise or crosswise
• Water, chemical resistant, and 100% weatherproof
• Single-piece construction ensures a superior hold
• Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide