Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Revitalize your classic E30 with improved throttle response, optimized airflow, and a clean, performance-oriented engine bay.
Designed specifically for BMW E30 models equipped with the M20 6-cylinder engine, this Turner Motorsport Intake System is a comprehensive upgrade that blends performance gains with OEM-style fitment and high-quality materials.
Passionately engineered to support increased engine efficiency across the RPM range, this intake system improves throttle response and ensures reliable airflow while maintaining full compatibility with factory components, including the stock AFM elbow.
Constructed with a durable stainless steel AFM bracket, 5052 powder-coated aluminum heatshield, and a heat-resistant silicone intake hose, this kit is built to last. It also includes a coolant overflow pass-through to support late-model E30 cooling systems, making it fully compatible with both early and late 6-cylinder models.
Installation is straightforward with no permanent modifications required, and detailed instructions are included.
Product Features:
Designed for all BMW E30 6-cylinder models with M20 engines
Retains the use of the factory AFM elbow
Durable stainless steel AFM mounting bracket
5052 powder-coated aluminum heatshield
High-quality silicone intake hose
Coolant overflow line pass-through for late-model cooling systems
Direct bolt-on installation – no permanent modifications required
Installation instructions included
Kit Contents:
Stainless Steel AFM Bracket
AFM Inlet Adapter & Gasket
Silicone Intake Elbow
Filter Adapter
Turner Blue Performance Cone Filter
5052 Aluminum Powder-Coated Heatshield
Stainless Steel Mounting Hardware
Give your E30 the performance and clean aesthetic it deserves. Engineered by enthusiasts, for enthusiasts.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Complete your 24V swap with an intake designed specifically for the job. The Turner 24V Swap Heat-Shield Intake is engineered for E30 engine conversions, delivering cold, dense airflow in tight engine bays while retaining use of the factory air duct.
Most swaps leave you with two less-than-ideal choices: bolt a filter directly to the MAF and suck in hot under-hood air, or cobble together a universal intake that still lacks proper heat shielding. Our swap intake eliminates those compromises.
Our low-profile, heat-shielded design isolates the filter from radiant engine heat, works seamlessly with the stock 3.0" MAF, and supports factory CCV/ICV routing. The result is OEM-like fitment with modern airflow efficiency, no wiring hacks, no vacuum headaches, just a clean, reliable intake solution built for your swap.
Key features:
Heat shield designed to fit M20 and M5X swapped cars — mounts to the frame rail and ties into the ABS mount for rock-solid positioning. Creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains stock 3.0" MAF, no adapters needed to run the factory OBD1/OBD2 MAF in a factory-like location.
Designed to preserve stock CCV and ICV hoses for M50/M52 setups, this keeps the typical manifold and crank-vents intact, thereby avoiding vacuum and idle headaches common in swaps.
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:
Specifically engineered to work with common 24V conversions where space is tight and retaining OEM-style plumbing is desired. Mounts to factory frame rail/ABS brackets, minimal modification required.
M50/M52 engines are among the most popular 24V choices thanks to robust iron blocks, widespread availability, and strong aftermarket support, making them an excellent pairing for turbo or naturally aspirated builds. Keeping the stock MAF and CCV/ICV routing reduces the troubleshooting surface during install and helps complete your swap faster.
Kit Contents:
Heat Shield
Hi-flow Turner Air Filter
Silicone Throttle Body Boot with plug
Maf Coupler
Inlet/Air Filter Adapter
Inlet Tube Bracket
Hardware for installation
Product Development:
Our Turner 24v Intake System was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in-ground dyno and in-house Superflow SF-750 Flowbench.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
No more slow starts! Does your car feel old? Age may not be the issue at all, your throttle cable bushings are mostly likely worn out and your car has lost its pep!
Your throttle cable is the main connection you have from the gas pedal to the throttle body. Do you have hesitation or delayed pedal response? Think of when you are sitting at a stop light or making a turn into a flow of traffic, you may not realize it but if you haven't replaced your throttle cable and bushings this will require you to apply pressure to the gas pedal before getting feedback which can cause slow starts at stop lights and put you in danger when merging in traffic. These are not issues with old cars, they are issues related to your throttle response!
Symptoms to look for: lackluster/sloppy throttle actuation, deformed throttle cable appearance, and bushing condition. Your throttle cable bushings can be soft, cracked or even disintegrated by now.
Upgrade from failed rubber to new billet aluminum bushings for quick gas pedal response and a better engagement with your car.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.
Used for Pro 5 R filters
This product was last offered at the strikethrough price on
03-17-2026
This product was last offered at the strikethrough price on
06-09-2026
This version uses aFe's highest flowing filter media, which uses a lightly oiled gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:
E30 3 series: 318i, 318is 318i Convertible 1990-1991
E30 3 series: 325e, 325es 1986-1988
E30 3 series: 325i, 325is 325ic, 325ix 1987-1991
E28 5 Series: 528e 1986-1988
E34 5 Series: 525i 1989-1990
E32 7 Series: 750il 1988-1994 (requires 2 of these filters).
This product was last offered at the strikethrough price on
01-28-2026
Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:
E30 M3 (1988-1991)
E30 318i (1984-1985)
E28 528e (1984-1985) and 535i/535is (1985-1988)
E12 5 series, All (1975-1981) - including 528i, 530i, 533i
E23 7 series, All except 745i (1977-1987) - including 730i, 733i, 735i, L7
E24 6 series, All except M6 (1976-1989) - incl. 630CS, 633Csi, 635CSi
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.
Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.
Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Line Systems) is designed to relocate your standard 3QT Snow Performance Water-Methanol Tank or any custom tank to the trunk of your vehicle. This upgrade includes everything necessary to safely move and secure your water-methanol system.