BMW 8 Series E31 (1991-1997)

APEX M12x1.5mm BMW 5 Lug Stud Kit - Hex head Black Finish - 75mm Leng...

2X Entries For Our G87 M2 Sweepstakes!

T#:637384

Part#: APEXM12STDKIT5HX

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

RennStand 3 Ton Jack Stand

T#:6811813

Part#: 18MRS3

In Stock

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

RennStand is the first and only vehicle safety stand with usable height adjustment that allows you to put your jack and safety stand at the same point under your vehicle

Universal Pinch Weld Jack Pad

T#:6811812

Part#: 18MP04

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Used with RennStand Jack stand to safely support vehicle's.

RennStand Puck Style Jack Pad

T#:48367004

Part#: RST-PAD-HPUCK-V1

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Designed specifically to work with the RennStand Jack Stand (18M-RS3), RennStand's new Puck Pad (Patent Pending) will hold a standard NHL hockey puck (not included) and is for those DIYers who prefer to place a hockey puck on their jack saddles to prevent damage to their jacking points. Now your RennStand gives you the same benefit while you lift and support your vehicle at the factory-designated jacking point.

Show More Show Less

Active Autowerke Rotrex Traction Fluid - One Liter

T#:397307

Part#: 12-032

Ships in 1 Business Day

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

RennStand Castle Style Jack Pad

T#:48367006

Part#: 18MP05

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Designed specifically to work with the RennStand Jack Stand (18M-RS3), RennStand's Castle Pad is a miniature version of a low profile jack saddle, meant to allow the RennStand's crossbar to essentially be an extenion of your jack, so if you typically lift your vehicle using your jack without any specific pad on its saddle, then this is the pad for you.

Show More Show Less

The RennStand Jack Stand - With Audi Jack Pad Adaptor

T#:6811809

Part#: 18M-RS3KT2

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

APEX ARC-8 19x9.5" ET22 Silver Wheel 20.95lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201387

Part#: ARC81995ET22HS

Ships in 5 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Silver 19x9.5" ET22 APEX ARC-8 Wheel.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	20.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit many BMW models and may fit others when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x9.5" ET22 Satin Black Wheel 20.95lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201386

Part#: ARC81995ET22SMBK

Ships on Oct 22, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

19x9.5" ET22 APEX ARC-8 Wheel 20.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	20.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10" ET25 Silver Wheel 21.95lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201396

Part#: ARC81910ET25HS

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX ARC-8 Wheel 21.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	21.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 19x10" ET25 Satin Black Wheel 21.95lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201395

Part#: ARC81910ET25SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX ARC-8 Wheel 21.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	21.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships in 2 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

REPAIR KIT GUIDE BUSH

T#:522333

Part#: 34216869617

Ships in 1-2 days

8% off MSRP $ 52.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Qty

8% off MSRP

$ 52.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Black Forest Industries Billet Heavy Weight Shift Knob - Alcantara Or...

T#:391722

Part#: GS2B

In Stock

Starting at $ 184.99 USD

Add to Wish List

Starting at $ 184.99 USD

Add to Wish List

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less

The RennStand Jack Stand - With Universal Pinch Weld Jack Pad ...

T#:6811806

Part#: 18M-RS3KT

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

RennStand is the first and only vehicle safety stand with usable height adjustment that allows you to put your jack and safety stand at the same point under your vehicle

Esoteric Interior Detailer - 32oz

T#:41998797

Part#: ESO.INT.32

Ships in 1 day

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Revitalize your car's interior with the ESOTERIC Interior Detailer. This high-quality car interior cleaner is made to make cleaning easy. It also keeps a smooth and natural finish.

APEX ARC-8 19x9.5" ET22 Anthracite Wheel 20.95lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201388

Part#: ARC81995ET22AN

Ships in 5 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

19x9.5" ET22 APEX ARC-8 Wheel 20.95lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	20.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201362

Part#: EC71995ET22SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Esoteric Iron Remover - 32oz

T#:41998800

Part#: ESO.IRON.32

Ships in 1 day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

A new formulation of the iron remover chemical allows the solution to dwell on your car's paintwork and break down embedded iron particles. Esoteric Iron Remover is a paint decontamination product that will allow you to remove embedded fallout without having the need to physically mar the paintwork with a clay bar.

Show More Show Less

ESOTERIC Glass Coating

T#:49822534

Part#: ESOWINDOWCOAT50

Ships in 1-2 days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

ESOTERIC Glass Coating delivers long-lasting clarity and hydrophobic performance for your vehicle’s windshield, windows, and mirrors. It repels rain, reduces glare, and helps keep glass cleaner for longer. Esoteric designed this coating to provide reliable visibility enhancement in all weather conditions. ESOTERIC Glass Coating improves water repellency, boosts nighttime clarity, and reduces the need for frequent cleaning.

Show More Show Less

Snap-in Receptacle Connector 2.5 With Cable - 1.0-2.5 mm�

T#:31655856

Part#: 61132466429

In Stock

Sale - Save 24% $ 5.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.58 USD

Add to Wish List

Qty

Sale - Save 24%

$ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.58 USD

Add to Wish List

FUSE

T#:573341

Part#: 61131372527

In Stock

Sale - Save 24% $ 1.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.52 USD

Add to Wish List

Qty

Sale - Save 24%

$ 1.99

This product was last offered at the strikethrough price on
06-25-2026

$ 1.52 USD

Add to Wish List

Drain Plug Sealing Washer

T#:517811

Part#: 07119963151

In Stock

Sale - Save 7% $ 1.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.85 USD

Add to Wish List

Qty

Sale - Save 7%

$ 1.99

This product was last offered at the strikethrough price on
06-25-2026

$ 1.85 USD

Add to Wish List

FUSE

T#:573652

Part#: 61131372528

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

IMIB NEXT 2023

T#:39396812

Part#: 81315A94559

Ships in 4 Business Days

$ 8,619.99 USD

Add to Wish List

Qty

$ 8,619.99 USD

Add to Wish List

Dealer Level system diagnostics, Shared Genuine MINI/BMW part

ESOTERIC Elite Ceramic Coating

T#:49822532

Part#: ESO.ELITECOAT.50

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

ESOTERIC Elite Ceramic Coating is the result of years of real-world testing on high-value cars in Esoteric's studio. Designed for enthusiasts who demand professional paint protection and long-term gloss, this coating delivers deep gloss, outstanding hydrophobic behavior, and durable protection when applied as directed.

Show More Show Less

Esoteric Maintenance Detail Spray - 16oz

T#:41998809

Part#: ESO.MAINT.16

In Stock

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Esoteric Maintenance Spray is an auto detailing spray that is used after washing your car to preserve the ceramic coating on the car, or to add a layer of sealant protection. A simple wipe-on, wipe-off product that adds slickness and water beading.

Show More Show Less

Esoteric Iron Remover - 16oz

T#:41998799

Part#: ESO.IRON.16

In Stock

$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 14.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 14.99 USD

Limited Qty Sale

Add to Wish List

A new formulation of the iron remover chemical allows the solution to dwell on your car's paintwork and break down embedded iron particles. Esoteric Iron Remover is a paint decontamination product that will allow you to remove embedded fallout without having the need to physically mar the paintwork with a clay bar.

Show More Show Less

ICE SCRAPER, SMALL

T#:50824620

Part#: 83192329713

In Stock

Sale - Save 17% $ 5.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.95 USD

Add to Wish List

Qty

Sale - Save 17%

$ 5.99

This product was last offered at the strikethrough price on
06-25-2026

$ 4.95 USD

Add to Wish List

Esoteric Tire Dressing - 16oz

T#:41998820

Part#: ESO.TIRE.16

In Stock

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.99 USD

Limited Qty Sale

Add to Wish List

A tire dressing that meshes a satin sheen, easy application, a dry finish that won't sling, and a long lasting appearance. Esoteric Tire Dressing uses a unique chemical makeup that applies thinly with a foam applicator, dries by the time you're done applying to all of the tires, and leaves a sheen that will through rain and inclement weather.

Show More Show Less

Esoteric APC & Tire Cleaner - 16oz

T#:41998784

Part#: ESO.APC.16

In Stock

$ 12.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 12.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.99 USD

Limited Qty Sale

Add to Wish List

APC car cleaner for your engine bay, tires, all weather floor mats, wheel well liners, and door jambs. Esoteric APC & Tire Cleaner has been formulated to safely clean multiple areas of your car so that you don't have to buy multiple products to get the job done.

Show More Show Less

ESOTERIC Leather Coating

T#:49822535

Part#: ESOLEATHERCOAT50

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

ESOTERIC Leather Coating is built to protect modern automotive leather from dye transfer, spills, and daily wear while keeping the factory look and feel. It adds a durable hydrophobic layer that resists staining and makes cleaning faster and easier. It leaves a natural, OEM-style matte finish with no greasy or slippery feel. Esoteric wanted a coating that would preserve the look of high-end interiors without making the leather shiny, plastic, or slippery. Many leather products darken the surface or leave a greasy film. ESOTERIC Leather Coating was developed in their studio to give serious enthusiasts a predictable, professional level of protection with a natural, OEM-style finish.

Show More Show Less

Esoteric Panel Prep Wipe - 16oz

T#:41998810

Part#: ESO.PANEL.16

In Stock

$ 14.99

This product was last offered at the strikethrough price on
05-03-2026

$ 13.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 14.99

This product was last offered at the strikethrough price on
05-03-2026

$ 13.99 USD

Limited Qty Sale

Add to Wish List

New solvent chemistry breaks down oils and residues to leave a prepped surface that is then ready for a ceramic coating, polymer sealant, or traditional carnauba wax. Esoteric Panel Wipe combines several types of mild solvents to allow you to remove compounding or polishing residues, old layers of last step products/spray waxes, or coating maintenance sacrificial layers. Esoteric Panel Wipe does the best job that we've seen in removing oils while also leaving a clean surface that is ready for a new protection layer.

Show More Show Less

Esoteric Wheel Cleaner - 1 Gallon

T#:41998824

Part#: ESO.WHEEL.128

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

A wheel cleaner with better ability to remove iron particles from your brake pads and rotors that also cleans dirt and debris from the road. Esoteric Wheel Cleaner has a more active chemical than traditional iron wheel cleaners for better ability to clean wheels with caked on brake dust.

Show More Show Less

ESOTERIC Leather Cleaner - 16oz

T#:49822538

Part#: ESO.LEATHER.16

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

ESOTERIC Leather Cleaner is a residue-free, water-based formula designed specifically for today’s automotive leather surfaces. It lifts dirt, oils, and light contamination without adding gloss, protection, or slip, making it the ideal first step before applying a dedicated leather conditioner or leather coating. Many interior cleaners are too aggressive for leather and can leave behind shine, streaks, or a tacky feel. ESOTERIC Leather Cleaner was built to deliver predictable cleaning power with controlled behavior, so you can clean leather safely and consistently without changing its look or feel. This product does not provide protection, conditioning, or long-term durability on its own

Show More Show Less

APEX Solid Gloss Black BMW Center Caps - Priced Each

2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Esoteric Wheel Cleaner - 16oz

T#:41998821

Part#: ESO.WHEEL.16

Ships in 1 Business Day

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

A wheel cleaner with better ability to remove iron particles from your brake pads and rotors that also cleans dirt and debris from the road. Esoteric Wheel Cleaner has a more active chemical than traditional iron wheel cleaners for better ability to clean wheels with caked on brake dust.

Show More Show Less

Suvneer Wheel Hanger - M12 X 1.25 - Red

Specifically for vehicles using M12 x 1.25 wheel bolts

T#:51356108

Part#: WHLHGR-12125-RD

Ships in 5 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

Take the heavy lifting out of your next wheel rotation with the Suvneer Motorsports™ Wheel Hanger in Red.

Esoteric Tar Remover - 16oz

T#:41998817

Part#: ESO.TAR.16

Ships in 1 day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Easily & effectively remove tar, adhesive and other residue from your cars exterior surfaces. Can also be used to remove road-grime buildup, salt and de-icer residue, helping to decontaminate your painted surfaces, restoring ceramic coating performance.

Show More Show Less

APEX ARC-8 19x9.5" ET33 Satin Black Wheel 20.5lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201383

Part#: ARC81995ET33SMBK

Ships in 5 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

19x9.5" ET33 APEX ARC-8 Wheel 20.5lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x9.5"
Offset (mm):	33
Weight (lbs):	20.5
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Esoteric Iron Remover - 1 Gallon

T#:41998801

Part#: ESO.IRON.128

Ships in 1 Business Day

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

A new formulation of the iron remover chemical allows the solution to dwell on your car's paintwork and break down embedded iron particles. Esoteric Iron Remover is a paint decontamination product that will allow you to remove embedded fallout without having the need to physically mar the paintwork with a clay bar.

Show More Show Less

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

2X Entries For Our G87 M2 Sweepstakes!

T#:201374

Part#: EC719105ET22SMBK

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Esoteric PH Neutral Car Wash Shampoo - 32oz

T#:41998815

Part#: ESO.PHWASH.32

Ships in 1 day

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

We took a LONG time developing our car shampoo because it is the detailing product that we use most when cleaning our cars. We wanted something that offered great foaming suds in a bucket or with a foam cannon, had great lubrication to prevent scratching while washing, and smelled amazing while using it. Safe for all waxes, sealants & ceramic coatings, our ESOTERIC pH Neutral Car Shampoo is designed to provide the cleaning power and surface lubrication necessary to give your finish the ultimate in effective care. Appropriate for use in a foam cannon or a bucket, the pleasant scent and plentiful suds will please even the most discriminating users.

Show More Show Less

Esoteric Interior Detailer - 16oz

T#:41998796

Part#: ESO.INT.16

Ships in 1 day

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Revitalize your car's interior with the ESOTERIC Interior Detailer. This high-quality car interior cleaner is made to make cleaning easy. It also keeps a smooth and natural finish.

Esoteric PH Neutral Car Wash Shampoo - 16oz

T#:41998814

Part#: ESO.PHWASH.16

Ships in 1 day

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

We took a LONG time developing our car shampoo because it is the detailing product that we use most when cleaning our cars. We wanted something that offered great foaming suds in a bucket or with a foam cannon, had great lubrication to prevent scratching while washing, and smelled amazing while using it. Safe for all waxes, sealants & ceramic coatings, our ESOTERIC pH Neutral Car Shampoo is designed to provide the cleaning power and surface lubrication necessary to give your finish the ultimate in effective care. Appropriate for use in a foam cannon or a bucket, the pleasant scent and plentiful suds will please even the most discriminating users.

Show More Show Less

Esoteric Isopropyl Alcohol 99% - 32oz

T#:41998803

Part#: ESO.IPA.32

Ships in 1 Business Day

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Ever wanted isopropyl alcohol, but the bottle and sprayer sucked? We were tired of the crappy bottles and sprayers that came with IPA when you bought them from a big box store, so we decided to offer them in our product line. We use Esoteric Isopropyl Alcohol in our paint protection film installation process, so it's a no-brainer to offer it to our customers.

Show More Show Less

Esoteric Insect Remover - 32oz

T#:41998794

Part#: ESO.BUG.32

Ships in 1 day

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Safely remove insects and other accumulated grime from a variety of surfaces. A light application will soften and break up the accumulation of proteins & residues from insects, allowing for easy rinsing away with no lasting effects.

Show More Show Less

Suvneer Motorsports Wheel Hanger - M12x1.5mm - Anodized Clear ...

T#:26005164

Part#: WHLHGR-1215-CL

Ships in 5 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results