BMW Engine Parts for BMW E36 (1992-1998) M3

Race German Single Vanos Rebuild - Seal Kit

T#:6843922

Part#: RGSVNSSK

Ships in 1 Business Day

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Fuel Injector Clinic 1000cc Fuel Injector - Set of 6

T#:6924326

Part#: IS802-1000H

Ships in 1 Business Day

$ 683.00 USD

Add to Wish List

Qty

$ 683.00 USD

Add to Wish List

High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.

Show More Show Less

Active Autowerke - S5X Supercharger Kit (Level 3)- E36 M3

T#:28504210

Part#: 12-005

Ships in 3 Business Days

5% off MSRP $ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD

Add to Wish List

Qty

5% off MSRP

$ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD

Add to Wish List

Active Autowerke, established in 1981, has become a highly regarded name in the BMW community, known for their top-notch power solutions for various BMW models. This supercharger kit they offer packs a punch, capable of generating over 400 horsepower for your BMW while ensuring the vehicle's structural integrity and suitability for daily driving. What sets this kit apart is the Rotrex supercharger's design, featuring a traction drive system that eliminates the lag commonly associated with other centrifugal superchargers. This results in a smooth and reliable power delivery experience.

Key components of the kit include the Rotrex C38-92 trim supercharger, an Active Autowerke front-mount air-to-air intercooler, a high-flow fuel pump, supercharger brackets, pulleys, and belts, six high-flow fuel injectors, an Active Autowerke air filter, dyno-tuned software, and all necessary mounting hardware, plumbing, hoses, and clamps. Additionally, the kit comes with an illustrated instruction manual and installation guide, ensuring a straightforward installation process. Active Autowerke also offers a 2-year warranty along with free technical support for added peace of mind.

Show More Show Less

Race German Single Vanos Rebuild - Seal And Rattle Kit

T#:6843924

Part#: RGSVNSSRK

Ships in 4 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Race German Single Vanos Rebuild - Seal Kit W/Modified Socket ...

T#:6843923

Part#: RGSVNSSK-MS

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit includes the modified sockets.

Show More Show Less

Race German Inline Fuel Pressure Adapter (1/8npt)

T#:7703242

Part#: RGIFPA

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.

Show More Show Less

Performance Rod Bearing Set - M5X

T#:26171648

Part#: 5150-HPRBS-M50

Ships in 3 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

5150 High-Performance Coated Rod Bearing Sets are made for the demands of high-performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market. Tech Notes: As with all bearings, please check your tolerances and size before installation. Due to the specialized tools needed, professional install recommended.

Show More Show Less

Performance M5X Main Bearing Set

T#:26171649

Part#: 5150-HPMBS-M50

Ships in 3 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market. Tech Notes: As with all bearings, please check your tolerances and size before installation. Due to the specialized tools needed, professional install recommended.

Show More Show Less

Performance Cylinder Head Gasket - S50 S52 Engines

T#:373874

Part#: C4329-140

In Stock at Vendor

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

Upgrade your BMW's engine with the Turner Motorsport Cometic MLS Head Gasket , one of the top multi-layer-steel gaskets available. Designed for durability, it's ideal for both high-performance applications and stock replacement, ensuring a long-lasting seal. With a thickness of .140" and an 87mm cylinder bore, this gasket provides excellent performance and reliability. Its multi-layer steel construction reduces bore distortion and can withstand extreme cylinder pressures. Plus, the Cometic MLS gasket is coated with a sealant that bonds to dry surfaces, simplifying installation.

Show More Show Less

M20/M50/M52/M54 - 1919CC 80.0mm Bore 66.0mm

T#:23218018

Part#: 7M1532H-.25

In Stock at Vendor

$ 376.99 USD

Add to Wish List

Qty

$ 376.99 USD

Add to Wish List

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

S52 Supercharger Kit - Level 1 (OBD2) - Rotrex C38 - E36 M3 ...

For OBD2 vehicles w/ Manual Transmission Only

T#:397239

Part#: 12-003

Ships in 10 Business Days

5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD

Add to Wish List

Qty

5% off MSRP

$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD

Add to Wish List

360HP/300TQ - a complete power solution for your M3!

BMW Rod Bolt Stretch Gauge with Billet Body & Thumb Hold

T#:4309

Part#: 100-9942

In Stock at Vendor

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.

VF Engineering Supercharger Kit - 350hp & 295 Ft-Lbs Torque - E36 M3 ...

T#:371024

Part#: VFK28-01

Ships on Oct 13, 2026

$ 4,995.00 USD

Add to Wish List

Qty

$ 4,995.00 USD

Add to Wish List

BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.

This 6.0 psi VF Engineering supercharger system is designed for simple bolt-on installation, remains fully OBD2 compliant, and can be installed in a single day, ready to run in approximately 8 hours. This kit is also non-intrusive and is fully reversible.

The 6.0 psi manifold at peak boost was tested to be the optimal induction charge limit without aftercooling and offers max tourqe gains!

Upon ordering, you will be required to send your VIN number, ECU, and transmission type (auto or manual) to VF Engineering within 1 year of purchase for your software flash of the ECU.

This product is supported by a 1 year unlimited mileage warranty on the product only.

Show More Show Less

Race German Fuse Replacement Kit

T#:2602226

Part#: E36FUSEKIT

Ships in 1 Business Day

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Complete set of fuses from OE BMW supplier for direct replacement of blown or mismatched fuses. Kit includes A complete set of new OEM fuses Extra fuses Fuse puller

BMW S52B32US 9:1 JE Piston KIT

T#:33713123

Part#: 297170

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons Forged Piston Set – BMW S52B32US – 9:1 Compression Ratio Elevate your BMW S52B32US engine with this JE Pistons forged piston kit, designed for durability and performance. 9:1 Compression Ratio: Optimized for turbocharged or supercharged applications, allowing for higher boost without compromising reliability. Forged Aluminum: Lightweight and strong, engineered to withstand high pressures and temperatures. Precision Fit: Tailored for seamless installation in the S52B32US engine. Ideal for enthusiasts looking to boost horsepower and performance, this piston kit ensures exceptional durability and reliability.

Show More Show Less

Active Autowerke Supercharger Kit - (Rotrex) - E36 M3

For vehicles with a Manual Transmission only

T#:340092

Part#: AARSC-E36M3

Ships in 10 Business Days

Starting at $ 8,074.00 USD

Add to Wish List

Starting at $ 8,074.00 USD

Add to Wish List

No one buys an M3 because they like limits. This carefully engineered kit matches the Rotrex C38 supercharger with the perfect hardware, software and tuning to take the factory 240 HP straight up to 360 HP (with the potential for even more power with additional upgrades). Best of all, if your craving for more power is still insatiable, there is a higher upgrade Level 2 featuring more boost and a front mounted air to air intercooler. The Active Autowerke supercharger systrem is truly modular and fully upgradeable. Running on 91-93 octane pump fuel with full emissions system intact, this system has stood the test of real world conditions and delivers thrill-worthy performance on demand while still retaining that BMW feel for a comfortable daily commute.

Show More Show Less

MTX-D: Ethanol Content % And Fuel Temperature Gauge

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

Fuel Injector Clinic 650cc Fuel Injector - Set of 6

T#:6924313

Part#: IS802-0650H

Ships in 1 Business Day

$ 557.00 USD

Add to Wish List

Qty

$ 557.00 USD

Add to Wish List

High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.

Show More Show Less

BMW M50 M52 S50 S52 Shrick Camshaft Set 276 intake / 270 exhaust ...

T#:4731086

Part#: SCH-CSS-S52-276/

Ships in 2 Business Days

$ 2,640.99

This product was last offered at the strikethrough price on
09-10-2026

$ 1,779.99 USD

Add to Wish List

Qty

$ 1,779.99 USD

Add to Wish List

Elevate your BMW's engine performance with Schrick's premium camshafts, crafted with over 40 years of dedication to excellence. Catering to both street and track enthusiasts, Schrick ensures top-quality materials for strength and accuracy. This renowned brand has formed a lasting bond with BMW enthusiasts, providing advanced camshaft options that have stood the test of time.

Premium Schrick camshafts for BMW
Over 40 years of dedicated engine performance expertise
Ideal for both street and track applications
Top-quality materials for strength and accuracy
Trusted by BMW enthusiasts worldwide
Advanced engine testing and manufacturing technology

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

DeatschWerks DW400 In-Tank Fuel Pump W/ Universal Set Up Kit ...

T#:5389791

Part#: 9-401-1001

In Stock at Vendor

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Show More Show Less

IP High Performance Ignition Coil Set - M52/M54/S52

T#:1637695

Part#: IP-A122602

Ships in 5 Business Days

$ 895.00 USD

Add to Wish List

Qty

$ 895.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

IP High Performance Ignition Coil Set - M50/S50/S38

T#:1637694

Part#: IP-A122601

Ships in 5 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Supertech BMW M50/M52/S50/S52 Inconel Exhaust Valve - Set Of 12 ...

T#:9126167

Part#: BMEVI-1030S-12

In Stock at Vendor

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

The exhaust valves in your vehicle allow the exhaust port to be sealed during the combustion process, so that the engine can run at top efficiency. If the timing belt or lifter breaks, this can cause the piston to come in contact with the valve and bend or break it, causing an improper seal. This will cause a rough idle, misfires, and a check engine light condition. Be sure to replace your bent or broken valve today and keep your engine running strong.

Show More Show Less

282/274 - 244/236 - 11.50mm/11.00mm - 3.20mm/2.65mm

T#:27338713

Part#: 1304259

Ships in 3 Business Days

$ 1,279.00 USD

Add to Wish List

Qty

$ 1,279.00 USD

Add to Wish List

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Supertech BMW M50/M52/S50/S52 Black Nitrided Intake Valve - Set Of 12...

T#:9126168

Part#: BMIVN-1030S-12

In Stock at Vendor

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Generally, an intake valve is the name for a valve that allows air or fluid to pass through it, typically during the intake phase of an engine's operation. In your car, the intake valves allow an air and fuel mixture into the engine's cylinders where it can then be compressed. The valves shut during the compression phase and the spark plug ignites the air and fuel mixture, creating a force that propels the car forward. If these valves aren’t working properly, the engine will create less power and it can damage the engine over time.

Show More Show Less

Achilles Motorsports Single VANOS Elimination Kit - BMW M50TU M52 S50...

T#:1150770

Part#: 11-AM-VEK-S52

Ships in 3 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Achilles Motorsports' Vanos Elimination kit includes the parts necessary to lock or eliminate your Single Vanos system and give the engine builder the ability to take full advantage of the fine-tuning/degreeing associated with race specification camshafts. This helps ensure you get the maximum power, reliability, and horsepower from your engine. This kit is for Single Vanos M50TU, M52, S50 & S52 Engines

Show More Show Less

VAC Harmonic SuperDamper By ATI - BMW S50B32 EURO

T#:7355606

Part#: HPCDK-S50B32-S

Ships in 3 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

Bass Tone Sports Horn Kit 400Hz + 500Hz, 115Db

T#:31589317

Part#: 85110

In Stock

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

King Performance BMW S54 Main Bearings - .25 Oversize

T#:25706120

Part#: MB7039AM0.25

Ships in 6 Business Days

13% off MSRP $ 207.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.99 USD

Add to Wish List

Qty

13% off MSRP

$ 207.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 179.99 USD

Add to Wish List

Replace your worn out OE main bearings with King's .25 Oversize Performance S54 Main Bearing Set!

DeatschWerks Performance Fuel Injector Set - 90lb/hr(1000cc) ...

For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!

T#:6151338

Part#: 16U-00-0090-6

In Stock

$ 524.99

This product was last offered at the strikethrough price on
09-15-2026

$ 519.00 USD

Add to Wish List

Qty

$ 519.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 90lb/hr 1000cc injectors. All relevant tuning data available on DeatschWerks website.

Show More Show Less

Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Race...

T#:38161705

Part#: 101-0258

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is designed for high-performance fuel systems, providing efficient filtration to protect vital components in your BMW. With a 6-micron filtration capability, this element ensures that harmful debris and contaminants are removed, safeguarding fuel pumps, injectors, and other critical parts from damage. Whether you're racing or daily driving, this filter helps maintain optimal fuel flow, ensuring consistent engine performance under all conditions.

This dual open design fits seamlessly into Precision Raceworks inline fuel filters, offering reliable and efficient performance for both street and track applications. Easy to replace and designed for maximum protection, this filter element helps keep your fuel system in top condition, ensuring long-lasting performance and reliability.

6-micron filtration – Effectively removes harmful contaminants, improving fuel system longevity
Dual open design – Provides balanced flow and efficient filtration for superior fuel system protection
Precision-engineered – Custom fit for Precision Raceworks inline fuel filters, ensuring easy installation
Durable construction – Built with high-quality materials to withstand demanding driving conditions
Protects critical components – Safeguards fuel pumps, injectors, and more from debris and impurities
Simple maintenance – Quick and easy to replace, ensuring your system performs at its best
Versatile usage – Suitable for both high-performance racing and daily driving

Fuel Filter Replacement Guidelines:

Racing applications: Inspect twice per season and replace as needed to maintain peak performance
Daily driving: Inspect at least once per year or every 6,000 miles for preventative maintenance

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is an essential upgrade to keep your BMW’s fuel system running smoothly and protected from contaminants.

Show More Show Less

SuperTech Black Nitrided Exhaust Valve - +1mm Oversize - Set Of 12 -...

T#:11857222

Part#: BMEVN-1031S-12

Ships in 8 Business Days

$ 322.99 USD

Add to Wish List

Qty

$ 322.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Head Diam: 31.50mm Material: Black Nitride Groove Type: Single Groove Length: 105.65mm Stem Diam: 5.95mm Size: 1mm+

Show More Show Less

7.89mm(5/16") Male - 7.89mm(5/16") Female - Fuel Line Fitting AN6 PTF...

T#:38094344

Part#: 201-0177

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds

E36 Fuel Pump Installation Sleeve

T#:13694125

Part#: BMWE36FPIS

Ships on Oct 15, 2026

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

This adapter sleeve and clamp from Rally Road simplify the installation of an Aeromotive or Walbro fuel pump into the factory fuel pump housing and carrier.

VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52

For use only with OBD1 engine management systems. Will not work with S50B30 & S50B32 Eu...

T#:639877

Part#: VAC-HPCD-M50-TR

Ships on Oct 13, 2026

$ 1,139.99 USD

Add to Wish List

Qty

$ 1,139.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3 as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Kit includes: Damper Lightweight VAC Billet Crankshaft Pulley Mounting and Installation Hardware Trigger Ring for OBD1 systems Note: Will NOT work with S50B30 & S50B32 Euro Engines, For Street/Track cars with Air Conditioning, the Additional A/C Pulley Option is REQUIRED as the OE A/C pulley is not compatible. The additional mounting and installation hardware is also included. Made in the USA

Show More Show Less

VAC Motorsports Oil Pump Shaft Upgrade Kit - E36 M3 Euro S50B30 ...

For European market cars equipped with the S50B30 only.

T#:24179136

Part#: VAC-OPUK-S50B30

Ships on Oct 13, 2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Bulletproof your Euro S50 with this fail-proof oil pump shaft upgrade from VAC Motorsports.

M50 Oil Cooler Cap

T#:401463

Part#: B015-8BL

Ships on Oct 13, 2026

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

VAC Motorsports Oil Pump Shaft Upgrade Kit - E36 M3 Euro S50B32 ...

For European market cars equipped with the S50B32 only.

T#:24179135

Part#: VAC-OPUK-S50B32

Ships on Oct 13, 2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Bulletproof your Euro S50 with this fail-proof oil pump shaft upgrade from VAC Motorsports.

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Oct 13, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Supertech BMW M50/M52/S50/S52 Dual Valve Spring Kit

T#:9126166

Part#: PRK-H1000D-BM

Ships on Oct 13, 2026

$ 763.99 USD

Add to Wish List

Qty

$ 763.99 USD

Add to Wish List

Rally Road M50 Oil Cooler Cap Adapter Kit

T#:401511

Part#: RROCCK

Ships on Oct 13, 2026

Starting at $ 243.99 USD

Add to Wish List

Starting at $ 243.99 USD

Add to Wish List

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

This oil cooler system is race tested and proven to outflow the euro M3 oil filter housing. Additionally, this particular system uses a sealing mechanism to direct the oil flow through the cooler lines and then through the oil filter. Other cooler caps do not provide this seal and therefore the external oil coolers and lines act as a "balloon". The lines and cooler are pressurized, but oil does not flow through them. Flowing oil means it is being cooled and not just acting as an external reservoir.

Flow testing reveals that the oil cooler cap will outflow the Euro M3 Oil Filter Housing by more than 80% at the same, pressure, RPM, and oil temperature. In the upper RPM range, there is nearly a 100% improvement in flow from the RallyRoad oil cooler cap when compared to the Euro M3 oil filter housing. This is a massive improvement over OE and is a worthwhile upgrade, especially in engines that see severe duty.

Features:

-8AN o-ring ports to provide a leak free fitting without the use of Teflon tape or sealant used by other oil cooler caps.
Viton o-rings are used throughout to maintain function and sealing in a high-temperature oil environment.
Use of the stock filter cap bolt to reduce cost and simplify installation.
An internal sealing mechanism to direct oil flow through the oil cooler and through the filter.
1/8" NPT side port for external oil pressure gauge.

Kit Includes:

Oil filter cap with fittings
Oil filter sealing ring
BMW MANN Oil Filter and gasket

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less

Fuel Pump Installation Sleeve

T#:401525

Part#: RRE36FPS

Ships on Oct 13, 2026

Starting at $ 46.99 USD

Add to Wish List

Starting at $ 46.99 USD

Add to Wish List

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

Anyone that has approached the subject of substituting a higher volume fuel pump knows that fitting said pump into a stock housing can be a hassle. What's more is that certain methods can lead to less than safe or reliable results. Enter the Rally Road fuel pump adapter sleeve. This simple adapter makes the installation of a Walbro or Aeromotive fuel pump into the factory sending unit safe, secure and completely functional. The pump rests on a ledge at the bottom of the sleeve and is held tightly in the bracket by a mil-spec stainless steel clamp. A well thought, quality built solution to a common retrofit problem.

Fits Walbro 450lph high volume fuel pumps.

This kit includes:

Anodized fuel pump sleeve
Stainless steel mil-spec hose clamp

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161737

Part#: 201-0406

Ships on Oct 20, 2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Rally Road Walbro 485 Lph Fuel Pump With E36 Install Kit - E36 ...

T#:1196153

Part#: B046-KIT

Ships on Oct 16, 2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

This single pump is one of the highest flowing around

86.60mm x 31mm CH, 89.6mm stroke,135mm rod,22mm pin,-25.0cc,304g,9.0C...

T#:2929013

Part#: 930024709T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

MAHLE PowerPak Piston Kit 86.60mm with Thermal Barrier Coating (TBC) ...

T#:2929010

Part#: 930024409T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S52 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

IRP Performance Solid Engine and Transmission Mounts - E30 E36 E46 ...

T#:401414

Part#: IRPEGS-1

Special Order: No Guaranteed ETA

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

The middle ground is Polyurethane. Polyurethane is much stiffer than rubber, but these still let a large amount of movement in comparison to solid mounts. These are great for sporty, aggressive street driving, but for the track are not ideal.

For the track, solid mounts are great. Solid mounts give you an immediate transfer of power, at the cost of increase NVH. This is great for the track where comfort is the least of your worries and power is all that is important.

Features:

Aluminum and Polyurethane Construction
80A Durometer Rating
New Hardware

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW E36 (1992-1998) M3

Sub-Categories

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results