Schrick Solid Lifter Conversion Kit (convert Hydraulic Lifters To Sol...

T#:359938

Part#: 086311700KT

Ships on Jan 15, 2027

$ 833.52 USD

Add to Wish List

Qty

$ 833.52 USD

Add to Wish List

One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.

Show More Show Less

Schrick Camshaft Set - E36 M3-spec - 252/244 Degree

T#:21521

Part#: TMS21521

Ships on Jan 15, 2027

$ 3,470.66 USD

Add to Wish List

Qty

$ 3,470.66 USD

Add to Wish List

These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

BMW S52/M52 6 Cyl. 256-Degree - Exhaust Camshaft

T#:637317

Part#: 0261A1561-02

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M52 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 256 Duration Exhaust @ 1mm - 227 Exhaust Peak Timing - Cam Lobe Lift Exhaust - Valve Lift w/o Valve Clearance Exhaust - Valve Clearance Exhaust -

Show More Show Less

Schrick Camshaft Set (256/264) - E36 M3, MZ3, M52 inc 2.8 1995-99 ...

T#:3859

Part#: TMS3859

Ships on Dec 18, 2026

$ 2,799.99 USD

Add to Wish List

Qty

$ 2,799.99 USD

Add to Wish List

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick - S52/M52 Intake Camshaft (264-Degree/11.2mm Lift) - E36, E39...

T#:300487

Part#: 261.E1.641-V2C

Ships on Dec 18, 2026

$ 1,398.99 USD

Add to Wish List

Qty

$ 1,398.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 264 Duration Intake @ 1mm - 227 Intake Peak Timing - Cam Lobe Lift Intake - Valve Lift w/o Valve Clearance Intake - Valve Clearance Intake -

Show More Show Less

BMW S50/S52 6 Cyl. 284-Degree - Intake Camshaft

T#:589750

Part#: 0284E1840-0V2

Special Order: No Guaranteed ETA

$ 1,596.99 USD

Add to Wish List

Qty

$ 1,596.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 129 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0, 25

Show More Show Less

HARD Motorsport BMW Oil Cooler Fitting Adapter Plate - E36 E46 E82 E9...

For vehicles with a Euro oil filter housing and Euro oil cooler

T#:593621

Part#: OILADPTR

Special Order: No Guaranteed ETA

$ 62.00 USD

Add to Wish List

Qty

$ 62.00 USD

Add to Wish List

The HARD Motorsport Oil Cooler Fitting Adaptor Plate allows you to upgrade your oil cooler lines to a flexible braided hose that can be routed in any direction, giving the ability to upgrade or relocate your oil cooler. This kit replaces the oil cooler hard lines with two -10 AN fittings, mounting bracket, O-rings, and adaptor bracket, which is CNC machined stainless steel.

Show More Show Less

Main Stud Kit - M50/M52/S50/S52

T#:26171653

Part#: ARP-MSK-M50

Back Ordered

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW 11111735525 for the M50/M52/S50/S52 engines that were used in a variety of BMW models. One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best. Installation Instructions: To ensure accurate torque readings and proper thread engagement, thoroughly clean all threads in the engine block. If necessary, use an ARP chaser to chase the threads. Before installing any hardware, carefully inspect and clean it for defects, shipping damage, and proper fit, length, and dimension. Gently screw the main studs into the engine block by hand until they are snug. Install the main caps, checking for any binding or misalignment. Apply ARP Ultra-torque fastener assembly lubricant to the threads of the studs, nuts, and washers. Install the washers and nuts onto the studs and tighten them by hand. It is highly recommended to use the ARP Ultra-torque fastener assembly lubricant provided with the kit, as it provides consistent clamping force and reduces friction on the studs. Do not use motor oil or other low-quality lubricants. PRELOAD (TORQUE) RECOMMENDATIONS 7. Following the manufacturer-recommended torque sequence tighten the nuts in steps 1-3 Step 1: Tighten to 20 ft-lbs. Step 2: Tighten to 40 ft-lbs. Step 3: Tighten to 60 ft-lbs. With the included ARP Ultra-Torque fastener assembly lubricant

Show More Show Less

Oil Pump Upgrade Kit - M50/M52/S50/S52

T#:26204983

Part#: 5150-OPUK-M50

Back Ordered

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

The M50/M52/S50/S52 engines are notorious for their well-documented problems stemming from harmonics. The vibration leads to the oil pump shaft becoming weak, causing it to either break or the oil pump nut to loosen and fall off, resulting in an immediate loss of oil pressure. Worry no more! 5150 has the solution! At the core of this kit is a hardened Chromoly shaft, meticulously centerless ground to guarantee absolute precision. This shaft is designed with an exclusive square key lock system, which not only prevents the gear from ever rotating on the shaft but also reinforces the mounting area, adding additional strength. Furthermore, we replaced the problematic oil pump nut with an extended-length bolt, which is EDM drilled to accommodate safety wire for a secure fit in all conditions. Don't wait until your oil pump fails, leaving you facing expensive engine repairs! Key Features: Centerless ground shaft made from hardened Chromoly. Bolt with EDM drilling, including safety wire. Grade 8 extended-length hardware for secure gear attachment. Left-hand threaded to prevent unexpected loosening. Double-D keyed shaft and drive gear. Fully serviceable and rebuildable without the need for grinding.

Show More Show Less

E36 325, 328 M3 Ferrea Titanium Retainer Set

T#:31

Part#: E11025-24

Back Ordered

$ 7,199.76 USD

Add to Wish List

Qty

$ 7,199.76 USD

Add to Wish List

E36 325, 328 M3 Ferrea Titanium Retainer Set - set of 24. Recommended to be used with the Ferrea Competition Plus Big Valves. MUST be used with the Ferrea high-performance valve spring and seat kit. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel, Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

E36 325, 328 M3 Ferrea Spring Seat Set

T#:163

Part#: SL1021-24

Back Ordered

$ 118.80 USD

Add to Wish List

Qty

$ 118.80 USD

Add to Wish List

E36 325, 328 M3 Ferrea Spring Seat Set includes 24 seats. MUST be uses with the Ferrea valve springs. Recommended to be used with the Ferrea Competition Plus Big Valves and Ferrea Titanium Retainers. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

E36 325, 328 & M3 Ferrea High Performance Valve Spring Set

T#:439

Part#: S10049-24

Back Ordered

$ 817.20 USD

Add to Wish List

Qty

$ 817.20 USD

Add to Wish List

Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Ferrea springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve springs provide the stability needed for high lift, high rpm racing and street car engines. Kit includes a set of 24 springs. MUST be used with the Ferrea Spring Seat and Titanium Retainers. See links below.

https://www.turnermotorsport.com/e/p-163-e36-325-328-m3-ferrea-spring-seat-set/

https://www.turnermotorsport.com/e/p-31-e36-325-328-m3-ferrea-titanium-retainer-set/

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i

Show More Show Less

MAHLE PowerPak Piston Kit - 86.60mm Bore - 12.5 CR - S52 - 3.2L ...

T#:2929011

Part#: 930024609

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S52 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 86.60mm - S52 - 3.2L

T#:2929009

Part#: 930024409

In Stock at Vendor

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S52 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

BMW M50 M52 S50 S52 Cut Ring Head Gasket

T#:45176130

Part#: ATH-CR330014

Back Ordered

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

BMW S50/S52 6 Cyl. 284-Degree - Exhaust Camshaft

T#:589751

Part#: 0284A1840-0V2

Special Order: No Guaranteed ETA

$ 1,596.99 USD

Add to Wish List

Qty

$ 1,596.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 284 Duration Exhaust @ 1mm - 253 Exhaust Peak Timing - 114-76 Cam Lobe Lift Exhaust - 11, 9 Valve Lift w/o Valve Clearance Exhaust - 11, 9 Valve Clearance Exhaust - 0, 25

Show More Show Less

MAHLE PowerPak Piston Kit 86.60mm - S52 - 3.2L

T#:2929014

Part#: 930024709

Back Ordered

$ 1,085.99 USD

Add to Wish List

Qty

$ 1,085.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S52 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

1/2"/12mm Band Hose Clamp - 20-32mm

10X Entries Into Our F80 M3 Sweepstakes

T#:363015

Part#: 003402ECS05A-05

In Stock

Sale - Save 25% $ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

ECS 1/2"/12mm Band Hose Clamp - 20-32mm

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

Premium 304 stainless steel construction for durability
German-style T-bolt design for easy size adjustment
Versatile band widths cater to different hose sizes
Eliminates the need for expensive dealership purchases
Ensures secure and reliable hose connections

Show More Show Less

Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm) - Priced Eac...

10X Entries Into Our F80 M3 Sweepstakes

T#:637408

Part#: 028092ECS11AKT

Ships on Nov 3, 2026

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

Made from high-quality stainless steel for durability and corrosion resistance
M18x1.5mm threads ensure compatibility with most oxygen sensors
Ideal for custom exhaust setups or replacing damaged bungs
Essential for automotive enthusiasts looking to upgrade their exhaust system

Show More Show Less

3 Pin Connector

10X Entries Into Our F80 M3 Sweepstakes

T#:33412918

Part#: 12521732596

In Stock

Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the camshaft position sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521732596 - Commonly used for the camshaft position sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

Single Groove Valve Keeper 6mm - Priced Each

T#:3268708

Part#: KPR-6S-7

In Stock

$ 3.99

This product was last offered at the strikethrough price on
04-13-2026

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Two required per valve, for use with certain supertech valves 6.0mm single groove

LK-2M 2 Pin Connector Package

10X Entries Into Our F80 M3 Sweepstakes

T#:40072446

Part#: LK2M

In Stock

Sale - Save 29% $ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD

Add to Wish List

Qty

Sale - Save 29%

$ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

3 Pin Connector

10X Entries Into Our F80 M3 Sweepstakes

T#:33412925

Part#: 12521433915

In Stock

Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the engine oil level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521433915 - Commonly used for the engine oil level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

1/2"/12mm Band Hose Clamp - 25-40mm

10X Entries Into Our F80 M3 Sweepstakes

T#:340681

Part#: 003402ECS06A-09

In Stock

Sale - Save 25% $ 2.99

This product was last offered at the strikethrough price on
06-13-2026

$ 2.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 2.99

This product was last offered at the strikethrough price on
06-13-2026

$ 2.24 USD

Add to Wish List

Ensure secure hose connections with the 1/2"/12mm Band Hose Clamp. This versatile clamp provides a tight and reliable seal for various hose sizes, making it ideal for automotive, plumbing, and industrial applications. With its durable construction and easy installation, the 1/2"/12mm Band Hose Clamp is a practical solution for preventing leaks and maintaining efficiency.

Provides a tight and reliable seal
Versatile clamp for various hose sizes
Suitable for automotive, plumbing, and industrial applications
Durable construction ensures long-lasting use

Show More Show Less

77-85mm - 3/4" Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:377877

Part#: 003402ECS07A-05

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD

Add to Wish List

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

Made of durable 304 stainless steel for long-lasting performance
German-style T-bolt design for easy size adjustment
Convenient band widths for versatile applications
Quality alternative to dealership pricing

Show More Show Less

TCEuro Front Crankshaft Seal Installation Tool

T#:7084860

Part#: TOL-0002.1

Ships on Nov 9, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

TCEuropean was founded in 2021 by two University of Michigan Mechanical Engineers passionate about BMW and the community of BMW owners. Currently specializing on the E30 and E36 chassis, they soon realized that their dream was to upgrade, restore, and leave their mark on these iconic automobiles. TCEuro has designed this tool to replace the BMW seal installation tool (83300490965). This tool is intended to be used for the front crank seal behind the main bolt. The tool will allow you to install seals to the correct depth easily without damaging the metal surrounding the seal, or the seal itself. It is designed to be used with a rubber mallet. The rubber mallet is better at distributing the load on the tool to make sure the seal is installed evenly. Using a non-rubber hammer can break the tool.

Show More Show Less

Adjustable Hose Clamp - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:378496

Part#: 5574K12

In Stock

Sale - Save 3% $ 3.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.87 USD

Add to Wish List

Qty

Sale - Save 3%

$ 3.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.87 USD

Add to Wish List

Upgrade your hose fittings with the Adjustable Hose Clamp. Designed for versatility and reliability, this clamp provides a secure and adjustable solution for various hose sizes. With its durable construction and easy-to-use design, it ensures leak-free connections in automotive, plumbing, and industrial applications. Say goodbye to loose hoses and enjoy peace of mind with this essential hose clamp.

Provides secure and adjustable solution
Durable construction for reliability
Easy-to-use design for convenience
Suitable for automotive, plumbing, and industrial applications

Show More Show Less

Crankshaft Seal - Front

10X Entries Into Our F80 M3 Sweepstakes

T#:17871152

Part#: 11141275466

In Stock

Sale - Save 15% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.64 USD

Add to Wish List

3/8"/9mm Band Hose Clamp - 20-32mm

10X Entries Into Our F80 M3 Sweepstakes

T#:341297

Part#: 003402ECS06A-05

In Stock

Sale - Save 25% $ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 4.99

This product was last offered at the strikethrough price on
06-13-2026

$ 3.74 USD

Add to Wish List

Upgrade your Mini Cooper's hose clamping mechanism with the 3/8" (9mm) Band Hose Clamp from ECS. Designed for precision and durability, this clamp ensures a secure fit for hoses, preventing leaks and ensuring optimal performance. Crafted to meet high-quality standards, it provides reliable sealing and resilience against varying temperatures and pressures. Easy to install and engineered for long-term use, this hose clamp is an essential addition to maintain your Mini Cooper's functionality.

Precision-engineered for Mini Cooper hoses
Ensures a secure and leak-free fit
Resilient against temperature and pressure variations
Easy to install and durable for long-term use

Show More Show Less

Hose Clamp - 32mm-50mm

10X Entries Into Our F80 M3 Sweepstakes

T#:5228

Part#: 032-50T

In Stock

Sale - Save 40% $ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.39 USD

Add to Wish List

Qty

Sale - Save 40%

$ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.39 USD

Add to Wish List

Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Features:

9mm band width

6mm hex & slotted head

Smooth inside of band = optimal hose protection

OEM

430 Stainless steel band and housing with zinc plated steel screw

Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening

Screw support = ease of assembly due to the safe guidance of the emerging band

Short housing saddle = even contact pressure = improved efficiency

Show More Show Less

1.5mm X 51mm Metric Buna-N 70 O-ring

10X Entries Into Our F80 M3 Sweepstakes

T#:388889

Part#: N1.50X051

In Stock

Sale - Save 25% $ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

1.5mm X 51mm Metric Buna-N 70 O-ring is the perfect sealing solution for various industrial applications. Made from high-quality Buna-N material, this O-ring provides reliable sealing performance, ensuring leak-free connections. With its metric sizing and 70 durometer hardness, it offers versatility and durability for a wide range of uses.

High-quality Buna-N material
Reliable sealing performance
Metric sizing for versatility
70 durometer hardness for durability

Show More Show Less

60-80mm 1/2"/12mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:377836

Part#: 003402ECS05A-10

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

ECS Tuning Stainless Steel Hose Clamps for BMW

Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.

Benefits:

Convenient replacement for worn-out hose clamps
Made of durable stainless steel for long-lasting performance
Available in various band widths for versatile use
Affordable alternative to dealership pricing

Show More Show Less

Allen Head Bolt - priced each

10X Entries Into Our F80 M3 Sweepstakes

T#:372427

Part#: 91290A231

In Stock

Sale - Save 80% $ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD

Add to Wish List

Qty

Sale - Save 80%

$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD

Add to Wish List

Allen Head Bolt

Upgrade your fastening needs with the Allen Head Bolt, a versatile and reliable solution for various applications. Crafted from high-quality materials, these bolts offer exceptional strength and durability. Their allen head design ensures secure tightening and easy access, making them ideal for automotive, construction, and DIY projects. Elevate your projects with the precision and reliability of Allen Head Bolts.

High-quality materials for exceptional strength
Secure tightening with allen head design
Versatile usage for automotive, construction, and DIY projects
Reliable and durable solution for various applications

Show More Show Less

70-90mm 1/2"/12mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:341279

Part#: 003402ECS05A-11

In Stock

Sale - Save 25% $ 8.99

This product was last offered at the strikethrough price on
06-13-2026

$ 6.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 8.99

This product was last offered at the strikethrough price on
06-13-2026

$ 6.74 USD

Add to Wish List

1/2"/12mm Band Hose Clamp

For reliable hose fastening, opt for the top-tier 1/2"/12mm Band Hose Clamp. Engineered for durability and versatility, this hose clamp ensures secure connections in various applications. Invest in quality and maintain optimal functionality with this essential accessory.

Versatile clamp suitable for various hose sizes
Durable construction ensures long-lasting performance
Provides a secure seal for optimal functionality
Easy to install and adjust for convenience

Show More Show Less

3 Pin Connector

10X Entries Into Our F80 M3 Sweepstakes

T#:33412930

Part#: 12521706096

In Stock

Sale - Save 11% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 9.78 USD

Add to Wish List

Qty

Sale - Save 11%

$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 9.78 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the idle air control valve (IACV).

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521706096 - Commonly used for the idle air control valve (IACV).

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

12 Pc Metric Combination Wrench Set with 9 Piece Scraper, Hook, And P...

T#:26505018

Part#: 005989SCH01A03KT

In Stock

Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD

Add to Wish List

Qty

Sale - Save 15%

$ 95.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.47 USD

Add to Wish List

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

A complete set from 8 to 19 mm
Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

3" Blade MINI Awl, 90°, Hook, and Curve
6" Blade Awl, 90°, Hook, and Curve
6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

3 Pin Connector

10X Entries Into Our F80 M3 Sweepstakes

T#:33412924

Part#: 12521433917

In Stock

Sale - Save 18% $ 10.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.99 USD

Add to Wish List

Qty

Sale - Save 18%

$ 10.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.99 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the camshaft position sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521433917 - Commonly used for the camshaft position sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

Supertech 6mm Exhaust Valve Stem Seal - Viton - BMW S54 S52 S50 M54 M...

T#:641010

Part#: VS-VBM6E

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

90-110mm 3/8"/9mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:341281

Part#: 003402ECS06A-13

In Stock

Sale - Save 40% $ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.19 USD

Add to Wish List

Qty

Sale - Save 40%

$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.19 USD

Add to Wish List

ECS Tuning 304 Stainless Steel Hose Clamps

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

Made from high-quality 304 stainless steel for durability
German-style design with T-bolts allows for easy size adjustment
Various band widths for versatile use
Avoid dealership pricing without compromising on quality
Perfect for BMW enthusiasts seeking affordable yet reliable hose clamps

Show More Show Less

3 Pin Connector

10X Entries Into Our F80 M3 Sweepstakes

T#:33412947

Part#: 12521433916

In Stock

Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD

Add to Wish List

Includes connector housing with terminals and seals. Commonly used for the crankshaft position sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521433916 - Commonly used for the crankshaft position sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

70-90mm 3/8"/9mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:363017

Part#: 003402ECS06A-11

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

Full stainless steel construction
Various band widths available
German-style T-bolts for easy adjustment
Convenient solution for hose clamp replacement

Show More Show Less

60-80mm 3/8"/9mm Band Hose Clamp

10X Entries Into Our F80 M3 Sweepstakes

T#:341277

Part#: 003402ECS06A-10

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD

Add to Wish List

Discover ECS Tuning's stainless steel hose clamps, designed to simplify your Mini's maintenance tasks. No more waiting for dealership orders or overpaying!

These clamps offer versatility with various band widths and German-style T-bolts for size adjustment, ensuring they meet your required diameter. Say goodbye to dealer pricing while securing top-notch quality synonymous with ECS Tuning.

Stainless steel construction for durability
Versatile band widths for various applications
German-style T-bolts for size adjustment
High-quality alternative to dealership hose clamps

Show More Show Less

Precision Raceworks 6ft 3mm Vacuum Line

T#:38195399

Part#: 501-0051

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Precision Raceworks 6 feet of length and 3mm inner diameter

Supertech 6mm Intake Valve Stem Seal - Polyacrylic - BMW S54 S52 S50 ...

T#:641011

Part#: VS-VBM6I

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

ARP Ultra-Torque Fastener Assembly Lubricant (Select Your Size) ...

T#:338571

Part#: TMS1733

In Stock

Starting at $ 1.99 USD

Add to Wish List

Starting at $ 1.99 USD

Add to Wish List

If you are using a premium fastener, such as the ARP brand rod bolts, head bolts, or main bolts, then you will want this assembly lube. Made to be used to precisely duplicate all ARP fastener preload specifications.

Show More Show Less

CP-Carrillo Connecting Rod Set M5X Pro-Xtreme

T#:26204921

Part#: CAR-CRS-S52-XT

Ships in 3 Business Days

$ 2,099.99 USD

Add to Wish List

Qty

$ 2,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Xtreme Connecting Rods, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW M50 Non-VANOS, M52, S50, S52, and M54 engines with 135 mm Rods. Constructed from high-strength, aircraft-grade steel, these connecting rods are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these rods suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Please note that these 135 mm connecting rods are designed to fit M50 Non-VANOS, M52, M52TUB28, S50 U.S, S52 U.S, and M54B30 135mm Rod engines. They will NOT fit M50-VANOS engines, as they require 140 mm Rods.

Show More Show Less

Active Autowerke Rotrex Traction Fluid - 1 Liter

T#:57616348

Part#: RTF-1L

Ships in 3 Business Days

7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Qty

7% off MSRP

$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...

T#:577943

Part#: E36HS

Ships in 6 Business Days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.

Show More Show Less

Universal Vortex Breather Catch Can

2X Entries Into Our F80 M3 Sweepstakes

T#:587831

Part#: 034-101-4000

Back Ordered

$ 153.00 USD

Add to Wish List

Qty

$ 153.00 USD

Add to Wish List

BMW S50B30 JE Piston EURO FSR KIT

T#:33646289

Part#: 345626

In Stock at Vendor

$ 1,349.99 USD

Add to Wish List

Qty

$ 1,349.99 USD

Add to Wish List

JE Pistons BMW S50B30 Euro Piston 86.00mm Bore 1.245in. CH -4.30 CC - Single Piston JE Pistons for the BMW S50 engine are high-performance, forged pistons designed for durability and optimized performance in racing and high-output applications. The BMW S50 engine, found in models like the E36 M3, benefits from JE Pistons' lightweight, robust design, allowing for improved power output and engine reliability under extreme conditions.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW E36 (1992-1998) M3

Sub-Categories

ECS 1/2"/12mm Band Hose Clamp - 20-32mm

ECS Tuning Stainless Steel Hose Clamps for BMW

Benefits:

Allen Head Bolt

1/2"/12mm Band Hose Clamp

ECS Tuning 304 Stainless Steel Hose Clamps

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results