BMW Engine Parts for BMW E36 (1992-1998) M3

Victor Reinz Rear Crankshaft Seal - E30, E32, E34, E36, E39, E46, E53...

T#:372457

Part#: 11142249533

Ships on Oct 29, 2026

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Replace when doing a clutch job.

VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52

For use only with OBD1 engine management systems. Will not work with S50B30 & S50B32 Eu...

T#:639877

Part#: VAC-HPCD-M50-TR

Ships on Oct 29, 2026

$ 1,139.99 USD

Add to Wish List

Qty

$ 1,139.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3 as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Kit includes: Damper Lightweight VAC Billet Crankshaft Pulley Mounting and Installation Hardware Trigger Ring for OBD1 systems Note: Will NOT work with S50B30 & S50B32 Euro Engines, For Street/Track cars with Air Conditioning, the Additional A/C Pulley Option is REQUIRED as the OE A/C pulley is not compatible. The additional mounting and installation hardware is also included. Made in the USA

Show More Show Less

4 Pc. Spark Plug Socket Set-Euro

T#:1241318

Part#: CTA2030

Ships on Oct 29, 2026

$ 81.95 USD

Add to Wish List

Qty

$ 81.95 USD

Add to Wish List

Get the complete set and be ready.

Rein Exhaust Valve - E34, E36, E39, E46, Z3

2X Entries Into Our F80 M3 Sweepstakes

T#:379738

Part#: 11341739823

Ships on Oct 29, 2026

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Replacement exhaust valve

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Oct 29, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Rally Road M50 Oil Cooler Cap Adapter Kit

T#:401511

Part#: RROCCK

Ships on Oct 29, 2026

Starting at $ 243.99 USD

Add to Wish List

Starting at $ 243.99 USD

Add to Wish List

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

This oil cooler system is race tested and proven to outflow the euro M3 oil filter housing. Additionally, this particular system uses a sealing mechanism to direct the oil flow through the cooler lines and then through the oil filter. Other cooler caps do not provide this seal and therefore the external oil coolers and lines act as a "balloon". The lines and cooler are pressurized, but oil does not flow through them. Flowing oil means it is being cooled and not just acting as an external reservoir.

Flow testing reveals that the oil cooler cap will outflow the Euro M3 Oil Filter Housing by more than 80% at the same, pressure, RPM, and oil temperature. In the upper RPM range, there is nearly a 100% improvement in flow from the RallyRoad oil cooler cap when compared to the Euro M3 oil filter housing. This is a massive improvement over OE and is a worthwhile upgrade, especially in engines that see severe duty.

Features:

-8AN o-ring ports to provide a leak free fitting without the use of Teflon tape or sealant used by other oil cooler caps.
Viton o-rings are used throughout to maintain function and sealing in a high-temperature oil environment.
Use of the stock filter cap bolt to reduce cost and simplify installation.
An internal sealing mechanism to direct oil flow through the oil cooler and through the filter.
1/8" NPT side port for external oil pressure gauge.

Kit Includes:

Oil filter cap with fittings
Oil filter sealing ring
BMW MANN Oil Filter and gasket

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less

Supertech BMW M50/M52/S50/S52 Dual Valve Spring Kit

T#:9126166

Part#: PRK-H1000D-BM

Ships on Oct 29, 2026

$ 763.99 USD

Add to Wish List

Qty

$ 763.99 USD

Add to Wish List

Fuel Pump Installation Sleeve

T#:401525

Part#: RRE36FPS

Ships on Oct 29, 2026

Starting at $ 46.99 USD

Add to Wish List

Starting at $ 46.99 USD

Add to Wish List

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

Anyone that has approached the subject of substituting a higher volume fuel pump knows that fitting said pump into a stock housing can be a hassle. What's more is that certain methods can lead to less than safe or reliable results. Enter the Rally Road fuel pump adapter sleeve. This simple adapter makes the installation of a Walbro or Aeromotive fuel pump into the factory sending unit safe, secure and completely functional. The pump rests on a ledge at the bottom of the sleeve and is held tightly in the bracket by a mil-spec stainless steel clamp. A well thought, quality built solution to a common retrofit problem.

Fits Walbro 450lph high volume fuel pumps.

This kit includes:

Anodized fuel pump sleeve
Stainless steel mil-spec hose clamp

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less

Genuine BMW Tension strap - right

T#:43960

Part#: 16111180458

Special Order: No Guaranteed ETA

3% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.99 USD

Add to Wish List

Qty

3% off MSRP

$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.99 USD

Add to Wish List

Genuine BMW Tension Strap Outer Right
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,M52,S50,S52

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161737

Part#: 201-0406

Ships on Nov 5, 2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Genuine BMW Flywheel Locking Tool

T#:11460

Part#: 83300490822

Ships in 6 Business Days

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

GENUINE BMW BRACKET 83300490822

Gates Cooling System Water Valve - E36, Z3

T#:592637

Part#: 64118375443

Ships on Nov 2, 2026

$ 257.99 USD

Add to Wish List

Qty

$ 257.99 USD

Add to Wish List

Signs of no heat or the heat won't shut off

Fuel Line - E36

T#:45418

Part#: 16141183148

Special Order: No Guaranteed ETA

2% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Qty

2% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Genuine BMW Pressure Hose Assy - Obd-2
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44,M52,S52

Activated Carbon Container Pipe - E36

Akf/Run.Loss

T#:45112

Part#: 16131183351

Special Order: No Guaranteed ETA

3% off MSRP $ 32.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Qty

3% off MSRP

$ 32.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD

Add to Wish List

Genuine BMW Activated Carbon Container Pipe - Akf/Run.Loss
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44,M50,M52,S52

Show More Show Less

AMC Cylinder Head - Bare - E34, E36, E39, Z3

T#:383388

Part#: 11121703637

Special Order: No Guaranteed ETA

$ 1,631.99 USD

Add to Wish List

Qty

$ 1,631.99 USD

Add to Wish List

Bare head with guides and seats only

Genuine BMW Positive Battery Terminal Cover - E36, E32, E31

T#:141329

Part#: 61211386645

Special Order: No Guaranteed ETA

4% off MSRP $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD

Add to Wish List

Qty

4% off MSRP

$ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD

Add to Wish List

Genuine BMW Cover Positive Battery Terminal
This item fits the following BMW Chassis:
E36 M3,E36

Rally Road Walbro 485 Lph Fuel Pump With E36 Install Kit - E36 ...

T#:1196153

Part#: B046-KIT

Ships on Nov 3, 2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

This single pump is one of the highest flowing around

Bosch Starter Motor for E36 E46 Z3 6 Cylinder (SR0448X)

T#:338004

Part#: 12411712937

Ships on Nov 6, 2026

Starting at $ 284.00 USD

Add to Wish List

Starting at $ 284.00 USD

Add to Wish List

E36/E46/M50/M52/M54 STARTER - THIS ONE IS THE "LATER" STYLE THAT DOES NOT REQUIRE NUTS. A refundable core charge will be added to your sale, refunded to you when we get your old starter back. Replaces Bosch part number SR0445X.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Hydraulic Alternator Belt Tensioner Assembly

10X Entries Into Our F80 M3 Sweepstakes

T#:55030822

Part#: 11287838797

Ships on Nov 10, 2026

Sale - Save 10% $ 59.99

This product was last offered at the strikethrough price on
10-08-2026

$ 53.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 59.99

This product was last offered at the strikethrough price on
10-08-2026

$ 53.99 USD

Add to Wish List

E36 / E34 / E39 / Z3 - Complete Cylinder Head Basic Replacement Kit ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15744068

Part#: 114278337690-KT

Ships on Nov 10, 2026

$ 2,868.52 USD

Add to Wish List

Qty

$ 2,868.52 USD

Add to Wish List

Introducing the Complete Cylinder Head Basic Replacement Kit for BMW E36, E34, E39, Z3 with M52, S50, and S52 engines - your ultimate solution for efficient and cost-effective engine maintenance. This comprehensive kit is designed to maximize the performance, durability, and longevity of your BMW, ensuring it operates at peak efficiency for years to come. Optimal Engine Performance: Our Complete Cylinder Head Basic Replacement Kit is engineered to enhance your BMW's engine performance. By replacing the cylinder head, you can restore lost power and torque, resulting in improved acceleration and overall driving experience. Improved Fuel Efficiency: Upgrading your BMW with our kit not only boosts power but also enhances fuel efficiency. This means you'll save money on fuel costs while reducing your carbon footprint. Enhanced Durability: The components included in this kit are crafted from high-quality materials, ensuring long-lasting durability. This translates to fewer repairs and less downtime for your vehicle. Cost Savings: Investing in this comprehensive kit is more cost effective than purchasing individual components. It contains everything you need for a cylinder head replacement, eliminating the hassle of sourcing parts separately. OEM-Quality Parts: We prioritize quality and reliability, which is why our kit features OEM-equivalent or superior components. Rest assured that you're getting the best value for your money. Fits Multiple BMW Models: This kit is compatible with various BMW models, including E36, E34, E39, and Z3, with M52, S50, and S52 engines. This versatility ensures that a wide range of BMW enthusiasts can benefit from it. Extended Engine Lifespan: By replacing the cylinder head with our kit, you can significantly extend the lifespan of your BMW engine, leading to more trouble-free miles on the road. Satisfaction Guaranteed: Some kit components are covered by our Lifetime Replacement Program. We stand behind the quality of our Complete Cylinder Head Basic Replacement Kit. Your satisfaction is our priority, and we offer a satisfaction guarantee to provide peace of mind to our valued customers. Kit includes: 1 - BMW Coolant / Anitfreeze 7 - BMW TwinPower Turbo 5W-30 Engine Oil - 1 Liter 1 - Cylinder Head Bolt Kit 1 - Cylinder Head Installation Kit 14 - Cylinder Head Washer - Cylinder Head Bolts 1 - Engine Oil Drain Plug 28 - Exhaust Manifold Nuts 1 - Liquid Assembly Lube - 12 oz 1 - M52 / S52 Cylinder Head - Complete 1 - Turner Motorsport Oil Change Sticker 1 - Oil Filter Kit

Show More Show Less

86.60mm x 31mm CH, 89.6mm stroke,135mm rod,22mm pin,-25.0cc,304g,9.0C...

T#:2929013

Part#: 930024709T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

MAHLE PowerPak Piston Kit 86.60mm with Thermal Barrier Coating (TBC) ...

T#:2929010

Part#: 930024409T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S52 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Genuine BMW Plastic Filler Pipe OBDII - 16111183107 - E36

T#:44011

Part#: 16111183107

Special Order: No Guaranteed ETA

2% off MSRP $ 404.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 394.99 USD

Add to Wish List

Qty

2% off MSRP

$ 404.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 394.99 USD

Add to Wish List

Genuine BMW Plastic Filler Pipe - Obd Ii
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44,M52,S52

Crankshaft Position Sensor

T#:553500

Part#: 12141726065

Special Order: No Guaranteed ETA

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

The crankshaft sensor in your BMW does many important things. It relays to the engine computer the speed of the crank which is important for spark and fuel control. If your BMW cranks but won't start, there is a strong chance this sensor is your problem.

Show More Show Less

IRP Performance Solid Engine and Transmission Mounts - E30 E36 E46 ...

T#:401414

Part#: IRPEGS-1

Special Order: No Guaranteed ETA

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

The middle ground is Polyurethane. Polyurethane is much stiffer than rubber, but these still let a large amount of movement in comparison to solid mounts. These are great for sporty, aggressive street driving, but for the track are not ideal.

For the track, solid mounts are great. Solid mounts give you an immediate transfer of power, at the cost of increase NVH. This is great for the track where comfort is the least of your worries and power is all that is important.

Features:

Aluminum and Polyurethane Construction
80A Durometer Rating
New Hardware

Show More Show Less

Febi Crankshaft Seal - Front - E30, E31, E32, E34, E36, E38, E39, E52...

We Price Match - Give Us A Call or Chat!

T#:382324

Part#: 11141275466

Ships on Jan 12, 2027

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Should be replaced each time the crank pulley is removed

Febi Cylinder Head Bolt Kit - E36, E39, E46, Z3

We Price Match - Give Us A Call or Chat!

T#:363745

Part#: 11121721938

Ships on Jan 12, 2027

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Set of 14 stretch bolts for installing cylinder head

Febi Timing Chain - Lower - E34, E36, E39, E46, E53, E60, E83, Z3, Z4...

We Price Match - Give Us A Call or Chat!

T#:381716

Part#: 11311432176

Ships on Jan 12, 2027

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Keep your engine running properly

Febi oil pan gasket - E34, E36, E39, E46, E53, E60, E61, Z3

We Price Match - Give Us A Call or Chat!

T#:363747

Part#: 11131437237

Ships on Jan 12, 2027

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Metal / Rubber gasket

Febi valve cover gasket set - E36, E39, Z3

We Price Match - Give Us A Call or Chat!

T#:381662

Part#: 11120034108

Ships on Jan 12, 2027

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Complete valve cover gasket set to address valve cover oil leaks

Febi Hydraulic Alternator Belt Tensioner Roller - E36, E39, E46 ...

We Price Match - Give Us A Call or Chat!

T#:382335

Part#: 11281748131

Ships on Jan 12, 2027

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Replacement is recommend with every belt service

BMW S52/M52 6 Cyl. 256-Degree - Exhaust Camshaft

T#:637317

Part#: 0261A1561-02

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M52 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 256 Duration Exhaust @ 1mm - 227 Exhaust Peak Timing - Cam Lobe Lift Exhaust - Valve Lift w/o Valve Clearance Exhaust - Valve Clearance Exhaust -

Show More Show Less

Schrick Camshaft Set (256/264) - E36 M3, MZ3, M52 inc 2.8 1995-99 ...

T#:3859

Part#: TMS3859

Ships on Dec 18, 2026

$ 2,799.99 USD

Add to Wish List

Qty

$ 2,799.99 USD

Add to Wish List

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set - E36 M3-spec - 252/244 Degree

T#:21521

Part#: TMS21521

Ships on Feb 2, 2027

$ 3,470.66 USD

Add to Wish List

Qty

$ 3,470.66 USD

Add to Wish List

These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick Solid Lifter Conversion Kit (convert Hydraulic Lifters To Sol...

T#:359938

Part#: 086311700KT

Ships on Feb 2, 2027

$ 833.52 USD

Add to Wish List

Qty

$ 833.52 USD

Add to Wish List

One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.

Show More Show Less

Schrick - S52/M52 Intake Camshaft (264-Degree/11.2mm Lift) - E36, E39...

T#:300487

Part#: 261.E1.641-V2C

Ships on Dec 18, 2026

$ 1,398.99 USD

Add to Wish List

Qty

$ 1,398.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 264 Duration Intake @ 1mm - 227 Intake Peak Timing - Cam Lobe Lift Intake - Valve Lift w/o Valve Clearance Intake - Valve Clearance Intake -

Show More Show Less

BMW S50/S52 6 Cyl. 284-Degree - Intake Camshaft

T#:589750

Part#: 0284E1840-0V2

Special Order: No Guaranteed ETA

$ 1,596.99 USD

Add to Wish List

Qty

$ 1,596.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 129 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0, 25

Show More Show Less

Meyle Fuel Pump Delivery Unit

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:5973268

Part#: 16146758736

Ships on Dec 10, 2026

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. The fuel pump in your vehicle is essential for delivering the proper amount of fuel at the correct pressure. Usually, they fail unexpectedly and at the worst possible time. This fuel pump installs easily in the place of your broken or worn pump. All wiring connections are the same to make this an easy plug and play installation.

Show More Show Less

Hydraulic Alternator Belt Tensioner Roller

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:594521

Part#: 11281748131

Ships on Nov 4, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Replacement is recommend with every belt service

Genuine BMW Ignition Coil

T#:361295

Part#: 12137599219

Special Order: No Guaranteed ETA

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Flasher/Hazard Light Relay

T#:31125654

Part#: 61361388533

Special Order: No Guaranteed ETA

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Timing Chain Sprocket

10X Entries Into Our F80 M3 Sweepstakes

T#:26305091

Part#: 11311722841

Special Order: No Guaranteed ETA

Sale - Save 20% $ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 33.45 USD

Add to Wish List

Qty

Sale - Save 20%

$ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 33.45 USD

Add to Wish List

Cylinder Head Bolt Socket

T#:383796

Part#: OTC5940

Back Ordered

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

Used on the M42, M44, M50/M52, & S50/S52 for removal of the cylinder head bolts

Continental Knock Sensor - E36, E39

We Price Match - Give Us A Call or Chat!

T#:581320

Part#: S103541001Z

Back Ordered

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

also known as "Ping Sensor"

Bosch Alternator - 80amp - E36, E36 M3, E34 (M50)

T#:360361

Part#: AL0749X-COREKT

Back Ordered

$ 435.99

This product was last offered at the strikethrough price on
05-07-2026

$ 348.99 USD

Add to Wish List

Qty

$ 348.99 USD

Add to Wish List

Replacement 80 amp Bosch alternator for the M50, M52, S50 and S52 engine, found in many BMW's between 1992 1999. Bosch is an original equipment supplier to BMW, and is the finest and most recognized German brand of alternator available. Buy only the best alternator for your BMW -- buy a Bosch alternator. Price includes $50 core charge

Show More Show Less

HARD Motorsport BMW Oil Cooler Fitting Adapter Plate - E36 E46 E82 E9...

For vehicles with a Euro oil filter housing and Euro oil cooler

T#:593621

Part#: OILADPTR

Special Order: No Guaranteed ETA

$ 62.00 USD

Add to Wish List

Qty

$ 62.00 USD

Add to Wish List

The HARD Motorsport Oil Cooler Fitting Adaptor Plate allows you to upgrade your oil cooler lines to a flexible braided hose that can be routed in any direction, giving the ability to upgrade or relocate your oil cooler. This kit replaces the oil cooler hard lines with two -10 AN fittings, mounting bracket, O-rings, and adaptor bracket, which is CNC machined stainless steel.

Show More Show Less

Genuine BMW Jet Pump - E36

For vehicles with a production date from 02/1995

T#:7386

Part#: 16141183541

Back Ordered

6% off MSRP $ 410.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

6% off MSRP

$ 410.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Genuine BMW Left Sucking Jet Pump With Disconn.Part - Ilue
This item fits the following BMW Chassis:
E36 M3,E36

Fits BMW Engines including:
M42,M44,M50,M52,S50,S52

Show More Show Less

Genuine BMW Accessory Belt Kit - E36 323/328/M3, Z3 2.3/2.8/M Coupe/R...

T#:374430

Part#: 11281437929KT2

Back Ordered

$ 763.99 USD

Add to Wish List

Qty

$ 763.99 USD

Add to Wish List

Service your drive belt system to prevent getting stuck on the side of the road. The tensioners, pulleys, and belt are all subject to failure over years of operation and excessive wear. This kit includes all of the replacements for common problem-parts to restore your belt system.

Kit includes:

2 Genuine BMW belts
Genuine BMW hydraulic tensioner assembly
2 Genuine BMW pulleys (one idler, one for tensioner assembly)
Genuine BMW A/C belt tensioner
Idler pulley bolt

Show More Show Less

Main Stud Kit - M50/M52/S50/S52

T#:26171653

Part#: ARP-MSK-M50

Back Ordered

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW 11111735525 for the M50/M52/S50/S52 engines that were used in a variety of BMW models. One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best. Installation Instructions: To ensure accurate torque readings and proper thread engagement, thoroughly clean all threads in the engine block. If necessary, use an ARP chaser to chase the threads. Before installing any hardware, carefully inspect and clean it for defects, shipping damage, and proper fit, length, and dimension. Gently screw the main studs into the engine block by hand until they are snug. Install the main caps, checking for any binding or misalignment. Apply ARP Ultra-torque fastener assembly lubricant to the threads of the studs, nuts, and washers. Install the washers and nuts onto the studs and tighten them by hand. It is highly recommended to use the ARP Ultra-torque fastener assembly lubricant provided with the kit, as it provides consistent clamping force and reduces friction on the studs. Do not use motor oil or other low-quality lubricants. PRELOAD (TORQUE) RECOMMENDATIONS 7. Following the manufacturer-recommended torque sequence tighten the nuts in steps 1-3 Step 1: Tighten to 20 ft-lbs. Step 2: Tighten to 40 ft-lbs. Step 3: Tighten to 60 ft-lbs. With the included ARP Ultra-Torque fastener assembly lubricant

Show More Show Less

Oil Pump Upgrade Kit - M50/M52/S50/S52

T#:26204983

Part#: 5150-OPUK-M50

Back Ordered

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

The M50/M52/S50/S52 engines are notorious for their well-documented problems stemming from harmonics. The vibration leads to the oil pump shaft becoming weak, causing it to either break or the oil pump nut to loosen and fall off, resulting in an immediate loss of oil pressure. Worry no more! 5150 has the solution! At the core of this kit is a hardened Chromoly shaft, meticulously centerless ground to guarantee absolute precision. This shaft is designed with an exclusive square key lock system, which not only prevents the gear from ever rotating on the shaft but also reinforces the mounting area, adding additional strength. Furthermore, we replaced the problematic oil pump nut with an extended-length bolt, which is EDM drilled to accommodate safety wire for a secure fit in all conditions. Don't wait until your oil pump fails, leaving you facing expensive engine repairs! Key Features: Centerless ground shaft made from hardened Chromoly. Bolt with EDM drilling, including safety wire. Grade 8 extended-length hardware for secure gear attachment. Left-hand threaded to prevent unexpected loosening. Double-D keyed shaft and drive gear. Fully serviceable and rebuildable without the need for grinding.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW E36 (1992-1998) M3

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results