BMW Drivetrain Parts for BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Powerflex - Corporate Logo
T#:378980
Part#: PFR5-326X2
Ships in 1 Business Day
Sale - Save 15% $ 139.99

This product was last offered at the strikethrough price on
11-15-2026

$ 118.99 USD
Free Shipping
Sale - Save 15%
$ 139.99

This product was last offered at the strikethrough price on
11-15-2026

$ 118.99 USD
Free Shipping

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
Revshift - Corporate Logo
T#:1105938
Part#: STM-BT
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Solid bolt through 70D polyurethane trans mounts. Recommended for race use only. These trans mounts fit almost all BMW cars excluding the E30 M3 and a few older models. They commonly fit the E30, E36, E46, E9x, E8x, E21, E34, E39. Common BMW part numbers that these trans mounts replace are: 22316799331 23711175939 23711175424 23701141614 Revshift polyurethane transmission mounts are made in the U.S.A. from high-grade polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to its original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
XClutch - Corporate Logo
T#:24776628
Part#: XKBM24508-1A
Ships in 2 Business Days
$ 1,440.99 USD
Free Shipping
$ 1,440.99 USD
Free Shipping

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit from Turner Motorsport offers a high-performance solution with a lightweight design for improved throttle response and exceptional torque capacity. Ideal for high-performance racing applications, this kit provides the ultimate balance between drivability and power.

  • Lightweight Design: Enhances throttle response and overall driving dynamics.
  • High Torque Capacity: Supports up to 340 ft/lbs of torque, making it suitable for performance-driven applications.
  • Precision Engineering: Features the latest pressure plate design and friction material for optimal balance between drivability and performance.
  • Enhanced Pedal Feel: Carefully analyzed pivot point and diaphragm design ensure positive pedal feel and increased clamping force.

Specifications:

  • Clutch Disc Diameter: 9.448"
  • Clutch Disc Spline: 10
  • Disc Material: Organic
  • Disc Type: Sprung Solid
  • Input Shaft Diameter: 1.140625"
  • Flywheel Step: -3.8mm
  • Maximum Torque Capacity: 340 ft/lbs
  • Recommended Use: Street Use

Includes:

  • Single Mass Flywheel
  • 1 Sprung Organic Clutch Disc
  • Pressure Plate
  • Flywheel Bolts
  • Pressure Plate Bolts
  • Release Bearing
  • Alignment Tool
  • Clutch Spline Grease

XClutch performance upgrades are developed with over 30 years of experience and advanced testing facilities, offering top-notch engineering for both street and race applications.

Show More Show Less

Sachs - Corporate Logo
T#:367403
Part#: 21212226958
Ships in 1 Business Day
$ 264.30

This product was last offered at the strikethrough price on
08-26-2026

$ 225.87 USD
Free Shipping
$ 225.87 USD
Free Shipping
Keep your M3 on the road with a new clutch disc

ACT Heavy Duty Rigid 6-Pad Racing Clutch Kit With XACT Streetlite Fly...
ACT recommends upgrading to the E36 M3 slave cylinder for best clutch operation and ped...
ACT - Corporate Logo
T#:5608785
Part#: BM12-HDR6
Ships in 6 Business Days
$ 1,514.00 USD
$ 1,514.00 USD

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features a Heavy Duty pressure plate, a Performance Street sprung clutch disc, and an XACT Streetlite Flywheel.

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the R6 racing clutch disc. This disc is an unsprung, rigid disc with 6 pads that is best suited for drag and road racing and handles heat better thanks to its increased surface contact area versus the 4 pad version of this disc, the R4. The R6 pads are composed of ceramic friction materials and the disc has a chome-moly hub that is heat treated for additional strength under high load engagements. Over stock, this disc is much better for faster shifting and significantly higher torque loads. Unlike the stock disc, this racing disk has a slightly shortened life span due to its rigid design and pad composition. This in turn is offset thanks to its fast, aggressive engagement for track use.

The final main component is the XACT Streetlite Flywheel. This option is the most popular thanks to it versatility for street driving and drag/track style racing, its lighter weight for increased throttle response, and its single mass design.

Clutch Kit Specs:

  • Torque Rating: 505 ft/lbs
  • 83% torque capacity increase over stock!
  • Type of Disc: Racing
  • 10-count spline
  • Spline Size: 1-1/8" inch
  • Disc Weight: 2.4 lbs
  • Pressure Plate Weight: 11.2 lbs
  • Flywheel Weight: 15.9 lbs
  • 1 year Warranty from retail purchase date!

Fitment in following BMWs:
E36 BMW - Non-M submodels, ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.
E46 BMW - Non-M submodels, For vehicles with 5 speed transmissions only. Fits 325i/Ci models with a production date up to 03/2003.
Z3 BMW - Non-M submodels,  ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.

Show More Show Less
Wavetrac - Corporate Logo
T#:383303
Part#: 30309150WKWVT
Ships in 2 Business Days
$ 1,245.99 USD
Free Shipping
$ 1,245.99 USD
Free Shipping
Wavetrac® Torque Biasing Differential - Innovative: Patented Wavetrac® design automatically improves grip in low traction conditions. This feature is truly innovative and unlike and other torque biasing differential design. - Superior Materials: High strength 9310 steel gears are used in case-hardened billet or forged steel bodies. ARP® fasteners are used throughout the differential. - Maintenance Free: As supplied new, the Wavetrac® differential will perform a lifetime of service without maintenance or rebuilds. - Limited LIFETME Warranty: All Wavetrac® differntials include a transferable, limited lifetime warranty. *Additional technical information on the Wavetrac® Differential can be found at the following link: http://www.wavetrac.net/technical.htm
Show More Show Less

Valeo Single Mass Flywheel Conversion Kit - E36, E39, Z3
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377152
Part#: 52401210
Ships in 1 Business Day
$ 969.21 USD
Free Shipping
$ 969.21 USD
Free Shipping
Upgrade from your failure prone dual mass flywheel with this kit. Includes single mass flywheel, clutch kit and hardware.
Clutch Masters - Corporate Logo
T#:567090
Part#: 03CM1-HD00-AK
Ships in 2 Business Days
$ 1,044.99 USD
Free Shipping
$ 1,044.99 USD
Free Shipping

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version. 

  • FX100 (Stage I)

  • High performance street system

  • Holding capacity 70% over stock

  • Heavy-Duty reinforced pressure plate

  • Hi-Leverage™ pressure ring design

  • Sprung hub/cushioned disc

  • Steel-backed organic friction material

Fitment in following BMWs:
E46 BMW - Non-M submodels, For vehicles with 5 speed transmissions only. Fits 325i/Ci models with a production date up to 03/2003.
Z3 BMW - Non-M submodels,  ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.

Show More Show Less

Rear Differential Bushing - Priced Each
2X Entries Into Our F80 M3 Sweepstakes 2X Entries For Our Spin To Win Sweepstakes!
URO - Corporate Logo
T#:385088
Part#: 33171090950
Ships in 1 Business Day
$ 50.99 USD
Free Shipping on orders $49 and up

Rennline ExactShift Billet Short Shifter - Silver Anodized - BMW E30/...
For vehicles with a Manual Tranmssion Only. Will not work with Auto or DCT transmissions.
Rennline - Corporate Logo
T#:10681679
Part#: TR05-SILVER
Ships in 6 Business Days
Sale - Save 36% $ 950.00

This product was last offered at the strikethrough price on
11-10-2026

$ 605.63 USD
Free Shipping on orders $49 and up
Sale - Save 36%
$ 950.00

This product was last offered at the strikethrough price on
11-10-2026

$ 605.63 USD
Free Shipping on orders $49 and up
**Slight modifications to transmission tunnel may be required to fit E9X 3-series vehicles** Rennline's new ExactShift chassis mounted short shifter for the E30, E36, & E46 3-series BMW ushers in a whole new level of performance for your 5 or 6 speed transmission. The TR05 delivers a crisp, direct, and tight shift throw that compliments any driving style, both on and/or off the track. All of this wrapped up in an eye-catching and aesthetically pleasing design with the level of quality, engineering, and manufacturing you have come to expect from Rennline. Constructed from CNC machined aircraft grade billet aluminum Extended shift lever positioning shift knob closer to steering wheel for ultimate control Return-to-center shift lever action Included rubber bellows to seal shifter opening and lever for an OEM+ look Mounts directly to transmission tunnel using supplied hardware Compatible with OEM center consoles and shift boots Support plate provides rigid mounting of shifter to transmission tunnel Uses factory shift selector rod
Show More Show Less
Valeo - Corporate Logo
T#:377153
Part#: 52281208
Ships in 1 Business Day
$ 807.22 USD
Free Shipping
$ 807.22 USD
Free Shipping
Upgrade from your failure prone dual mass flywheel with this kit. Includes single mass flywheel, clutch kit and hardware.
Spec Clutches - Corporate Logo
T#:22591970
Part#: SB113
Ships in 3 Business Days
$ 539.00 USD
Free Shipping on orders $49 and up

The Spec Stage 3 clutch kit stands out with its carbon semi-metallic 6-puck sprung hub disc, celebrated for exceptional drivability, extended longevity, and remarkable torque capacity. This kit is tailor-made for street and race cars that demand a forceful yet street-friendly engagement and substantial torque capability. For those acquainted with "puck" style pressure plates, the Spec kit aims to deliver racing-style performance while ensuring a smoother street experience.

The double-sprung hub with spring cover reliefs enhances flexibility, reducing harsh shifts. Additionally, all kit components undergo heat treatment for heightened durability, ensuring optimal performance even in high-pressure, high-temperature scenarios.

Key Features:

  • High clamp pressure plate
  • Carbon-Graphite friction material
  • High-torque sprung hub and disc assembly
  • Includes bearing and tool kit
Show More Show Less


E36 M3 Clutch & Flywheel Upgrade Package for E36 323/325/328 ...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:3794
Part#: FLYE36M50UPGRADE
Ships in 9 Business Days
$ 1,133.99

This product was last offered at the strikethrough price on
11-13-2026

$ 1,132.99 USD
Free Shipping
$ 1,132.99 USD
Free Shipping
This kit uses the stock E36 M3 clutch with a JB Racing aluminum flywheel and M3 clutch slave cylinder for an outstanding improvement in the non-M E36. The stock M3 clutch is larger than the E36 325 disc and was used in the 321hp Euro M3 � way more clutch than you need on a 2.5 or 2.8-liter M50 and M52 (even supercharged cars). But because it�s a factory clutch the feel, durability, engagement, fitment, etc are OE spec!

  • OEM replacement clutch parts
  • lightweight aluminum flywheel for faster acceleration and quicker revs (15lbs less than stock)
  • comparable cost to OEM replacement parts
  • direct fit with no installation issues
    If you own an E36 but have never done a clutch job, you�re in for an unpleasant surprise! The stock flywheels don�t usually last much longer than 100,000 miles. It's not just the friction surface that wears but the internal dual-mass damping parts fail over time too. Now is the time to replace a faulty dual mass flywheel before it completely fails and you have to do a clutch job all over again. The best plan is to have a new flywheel on hand when installing the clutch. You can use a new OEM M3 flywheel but we've had such great success with the aluminum flywheels that we think it's a superior product. This package is actually about the same price as buying a new OEM clutch and new OEM flywheel! And there�s a big performance boost!
      Included with this Clutch / Flywheel package:
    • E36 M3 3.2 Sachs OEM clutch kit - clutch disc, pressure plate, throw-out bearing
    • E36 M3 JB Racing aluminum flywheel
    • new pilot bearing
    • E36 M3 clutch slave cylinder
    • UUC Clutch Stop
    • clutch alignment tool

    This complete kit makes a great overhaul for E36 M3 too!

    What about noise? A single-mass aluminum flywheel is not going to dampen as well as the dual-mass or steel flywheels. But we used this setup for over 100,000 miles on a daily driver/track car and there was never any serious complaints. It was hardly an issue unless the car was sitting at a drive-thru, on a hot day, with the A/C on. And then the noise was a slight rattle and nothing major. We haven't received a single complaint from customers either.

    This item fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
  • Show More Show Less
    Revshift - Corporate Logo
    T#:2119652
    Part#: PMM-R3680A
    Ships in 7 Business Days
    $ 149.99 USD
    Free Shipping
    $ 149.99 USD
    Free Shipping
    OEM LuK Twin Mass Flywheel -- E36 E34 E39 - M50 M52
    We Price Match - Give Us A Call or Chat!
    LUK - Corporate Logo
    T#:360442
    Part#: 21211223593
    In Stock
    $ 485.99

    This product was last offered at the strikethrough price on
    10-29-2026

    $ 481.99 USD
    Free Shipping
    $ 481.99 USD
    Free Shipping

    This is an OEM LuK stock twin mass flywheel. When your clutch starts to experience engagement chatter because of hot spots and wear, replacing it with this OEM dual mass flywheel will restore your vehicles driveability and have you clutch shifting smoothly again. OEM replacement for BMW part # 21211223593, 21211223542, and 21201223418.

    OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less

    Clutch Masters Stage 4 Clutch Kit - FX400
    For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
    For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)
    Clutch Masters - Corporate Logo
    T#:567255
    Part#: 03005-HDCL-D
    Ships in 3 Business Days
    $ 671.99 USD
    Free Shipping
    $ 671.99 USD
    Free Shipping

    Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

    • FX400 (Stage 4)

    • High performance street system

    • Holding capacity 70% over stock

    • Heavy-Duty reinforced pressure plate

    • Hi-Leverage™ pressure ring design

    • Sprung hub/cushioned disc

    • Steel-backed Ceramic Lined Sprung Disc friction material

    *This clutch kit does not include a flywheel. Requires use of single mass flywheel 

    Show More Show Less

    Lisle - Corporate Logo
    T#:5512204
    Part#: LIS30600
    Ships in 1 Business Day
    $ 47.99 USD
    Free Shipping on orders $49 and up
    Crimps Ear-Type Clamps in Hard-to-Reach Areas.
    Sachs - Corporate Logo
    T#:4185
    Part#: 21211223602
    Ships in 1 Business Day
    $ 339.99 USD
    Free Shipping
    $ 339.99 USD
    Free Shipping
    This OEM Sachs clutch kit includes the clutch disc, pressure plate and throw out bearing.

    This item fits the following BMWs:
    1992-1998 E36 BMW 328i 328is 328ic
    1997 E39 BMW 528i
    1997-1998 Z3 BMW Z3 2.8
    Show More Show Less

    JB Racing Lightweight Aluminum Flywheel & Clutch Kit
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    Packaged by Turner - Corporate Logo
    T#:15777312
    Part#: 520-040-215-KT
    Ships on Dec 4, 2026
    $ 994.99 USD
    Free Shipping on orders $49 and up
    A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response. This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come. Stock Flywheel Weight: 27 lbs. JB Racing Lightweight Aluminum Flywheel: 9 lbs.
    Show More Show Less
    JB Racing - Corporate Logo
    T#:340509
    Part#: WCCLUTCH
    Ships in 5 Business Days
    Starting at $ 1,999.00 USD
    Free Shipping
    Starting at $ 1,999.00 USD
    Free Shipping
    The ultimate in a racing flywheel and clutch! This was developed for use in our E36 and E46 World Challenge Touring Cars. The combined weight of the clutch and flywheel is only 11lbs!!!

    This multi-disc (2 or 3 disc setups) offer a minimal flywheel mass (enough to include a factory ring gear for the starter) and a small 5.5" clutch assembly rated to 500hp. By saving as much weight as possible less energy is used in simply spinning the flywheel/clutch assembly and that means a lot more power and torque is available at the drive wheels. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines and this is among the most advanced and lightest racing clutch kits available for your BMW race car.

    The JB Ultra-Light Performance racing clutch is available in 2-disc or 3-disc setups. We used the 5.5"/140mm size in our Touring Cars but larger sizes are available too. This is a turn-key racing clutch and flywheel kit that you don't have to engineer or spec yourself. This is the same clutch setup we used when winning the 2003 and 2004 Touring Car Championships - the quality and performance is unquestionable. That series also employed standing starts at each race and this clutch setup performed flawlessly with nearly a full season of racing on them before needing a change.

    JB Ultra-Light flywheels include:
  • precision CNC machined aluminum flywheel
  • zero-balanced up to 10,000 RPM
  • replaceable hardened steel clutch friction surface
  • Helicoil threaded inserts
  • high-strength grade 10.9 hardware
  • multi-disc racing clutch with Performance racing pressure plate
  • JB Racing throw-out bearing with custom bobbin
    This is a true racing clutch and will not function as a street-able clutch at all. It behaves as an on/off switch with no slippage allowed. Extreme care must be used when driving on to trailers and around the paddock. But when driven correctly the life span of this clutch is amazing - we could get a full season of racing a 300hp M54 from this clutch setup including standing starts at every race! Replacement clutch components and flywheel rebuilding are available.

    A properly adjusted clutch stop is required for use with this clutch kit.

    Stock Flywheel + Clutch Weight = 45+lbs
    JB Ultra-Light Flywheel & Clutch Weight = 11lbs

    This item fits the following BMWs:
    1992-1999 E36 BMW 325i 325is 328i 328is M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2005 E85 BMW Z4 2.5i (5-speed)
  • Show More Show Less

    ACT - Corporate Logo
    T#:14221793
    Part#: BM17-HDR6
    Ships in 6 Business Days
    $ 820.00 USD
    Free Shipping on orders $49 and up
    BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
    Show More Show Less

    Valeo Clutch Kit - E28, E30, E34, E36
    For vehicles with production date from 05/1986
    We Price Match - Give Us A Call or Chat!
    Valeo - Corporate Logo
    T#:379443
    Part#: 21211223546
    Ships in 5 Business Days
    $ 362.99 USD
    Free Shipping
    $ 362.99 USD
    Free Shipping
    Replace your worn or slipping clutch to restore drivability. Comprehensive kit includes pressure plate, clutch disc, throw out bearing, pilot bearing, and clutch alignment tool.
    Spec Clutches - Corporate Logo
    T#:583816
    Part#: SB801KT
    Ships in 3 Business Days
    $ 1,268.00 USD
    Free Shipping
    $ 1,268.00 USD
    Free Shipping
    GKN Drivetech - Corporate Logo
    T#:579260
    Part#: 300506
    Ships in 1 Business Day
    $ 37.41

    This product was last offered at the strikethrough price on
    10-27-2026

    $ 31.95 USD
    Free Shipping on orders $49 and up
    $ 31.95 USD
    Free Shipping on orders $49 and up
    Replace your ripped axle boot before your CV fails.


    FAG Rear Wheel Bearing Kit - E36, E46
    For vehicles with a production date up to 09/1999
    FAG - Corporate Logo
    T#:593517
    Part#: 7136492700
    Back Ordered
    $ 44.99 USD
    Free Shipping on orders $49 and up
    $ 44.99 USD
    Free Shipping on orders $49 and up
    Includes one bearing, axle nut, and circlip for a proper service.
    Driveshaft Shop - Corporate Logo
    T#:402367
    Part#: BMWSH1-CV
    In Stock at Vendor
    $ 1,115.99 USD
    $ 1,115.99 USD

    This is a 1-piece conversion for the BMW E36 platform. The shaft measures 2.75" x .170" tube with a 108mm CV to mount to the differential, which will eliminate any possible pinion angle issues. This shaft weighs 20lbs and since the center bearing is no longer used, it will make the car seem more athletic and give it a smoother power transfer. This shaft is now balanced on a 9500RPM balancer to ensure a perfectly balanced shaft. Comes complete with adapter plates to mount up to the transmission and differential flanges and all necessary hardware for installation.

    Please Note: The E36 M3 uses either a 4-bolt or 6-bolt rear differential flange. This driveshaft is for the 4-bolt rear differential ONLY. If your vehicle has a 6-bolt rear flange, please see part# BMWSH2-CV-C. Please verify which differential flange your vehicle has before ordering necessary hardware for installation.  Custom built to order.  Build time is 6-8 weeks.

    The Driveshaft Shop has been manufacturing heavy duty replacement driveshafts for street and track vehicles around the world for the last thirty years. Every single shaft is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. With materials such as Carbon Fiber, Aluminum, and Chromoly The Driveshaft Shop has a solution for you no matter what the application.

    This part fits the following BMWs:
    1995 - 1998 E36 M3

    Show More Show Less
    Valeo Single Mass Flywheel Conversion Kit - E36, Z3
    We Price Match - Give Us A Call or Chat!
    Valeo - Corporate Logo
    T#:377151
    Part#: 52161203
    Back Ordered
    $ 1,038.99 USD
    $ 1,038.99 USD
    Upgrade from your failure prone dual mass flywheel with this kit. Includes single mass flywheel, clutch kit and hardware.

    ZF - Corporate Logo
    T#:592115
    Part#: 24311422671
    Ships in 2 Business Days
    $ 33.80

    This product was last offered at the strikethrough price on
    10-27-2026

    $ 28.44 USD
    Free Shipping on orders $49 and up
    $ 28.44 USD
    Free Shipping on orders $49 and up
    Addresses input shaft leaks

    Performance Tool - Corporate Logo
    T#:5122269
    Part#: W83011
    Ships in 1 Business Day
    $ 23.31 USD
    Free Shipping on orders $49 and up
    Helpful tool for proper axle boot installations.

    South Bend Clutch - Corporate Logo
    T#:377762
    Part#: K70010HDO
    Ships in 1 Business Day
    $ 455.99 USD
    Free Shipping
    $ 455.99 USD
    Free Shipping
    Clutch Slave Cylinder
    For vehicles with production date up to 10/1994
    FTE - Corporate Logo
    T#:594644
    Part#: 21526758830
    In Stock at Vendor
    $ 127.08

    This product was last offered at the strikethrough price on
    10-27-2026

    $ 112.13 USD
    Free Shipping
    $ 112.13 USD
    Free Shipping

    ACT - Corporate Logo
    T#:31390578
    Part#: 601011
    Ships in 6 Business Days
    $ 694.00 USD
    Free Shipping on orders $49 and up

    BMW E36 M3 Z3 XACT Flywheel Streetlite is a high-performance upgrade designed to enhance engine response and acceleration. This Streetlite flywheel is significantly lighter than the stock flywheel, offering superior durability and strength. Crafted from Chromoly Steel, it provides excellent heat tolerance and rigidity, making it ideal for both street and drag racing applications.

    • Improved Performance: Noticeably enhances engine response and acceleration with minimal gear rattle.
    • Durability: Heat-treated forging ensures strength and toughness, while induction-hardened ring gears extend lifespan.
    • Quality Construction: One-piece design prevents failure, ensuring uniform heat transfer and preventing issues like warped inserts or loose ring gears.
    • Recommended Use: Suitable for both street and race applications.
    • ACT Advantage: Forged, CNC machined, and dynamically balanced for reliable high RPM performance.

    Specifications:

    • Product Weight: 15.2 lbs
    • Material: Chromoly Steel
    • Friction Surface Diameter: 9.4 inches (240 mm)
    • Flywheel Type: Streetlite
    • Tooth Quantity: 113
    • Warranty: 12 Months
    • SFI Rating: 1.1
    Show More Show Less

    AGA Tools - Corporate Logo
    T#:5175654
    Part#: AGA-SS-8-14-K
    Ships in 7 Business Days
    $ 169.00 USD
    Free Shipping
    $ 169.00 USD
    Free Shipping
    Due to minimal clearance, it’s difficult to get a hex socket in the gaps to remove plugs on rear differentials, transfer case and other engine drain/fill plugs.
    GSP North America - Corporate Logo
    T#:389704
    Part#: NCV27995
    Ships in 2 Business Days
    $ 125.99 USD
    Free Shipping
    $ 125.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E36 BMW 318is 

     

    Show More Show Less
    Rennline ExactShift Billet Short Shifter - Black Anodized - BMW E30/E...
    For vehicles with a Manual Tranmssion Only. Will not work with Auto or DCT transmissions.
    Rennline - Corporate Logo
    T#:10681677
    Part#: TR05-BLACK
    Ships in 6 Business Days
    Sale - Save 15% $ 950.00

    This product was last offered at the strikethrough price on
    11-12-2026

    $ 807.50 USD
    Free Shipping on orders $49 and up
    Sale - Save 15%
    $ 950.00

    This product was last offered at the strikethrough price on
    11-12-2026

    $ 807.50 USD
    Free Shipping on orders $49 and up
    **Slight modifications to transmission tunnel may be required to fit E9X 3-series vehicles** Rennline's new ExactShift chassis mounted short shifter for the E30, E36, & E46 3-series BMW ushers in a whole new level of performance for your 5 or 6 speed transmission. The TR05 delivers a crisp, direct, and tight shift throw that compliments any driving style, both on and/or off the track. All of this wrapped up in an eye-catching and aesthetically pleasing design with the level of quality, engineering, and manufacturing you have come to expect from Rennline. Constructed from CNC machined aircraft grade billet aluminum Extended shift lever positioning shift knob closer to steering wheel for ultimate control Return-to-center shift lever action Included rubber bellows to seal shifter opening and lever for an OEM+ look Mounts directly to transmission tunnel using supplied hardware Compatible with OEM center consoles and shift boots Support plate provides rigid mounting of shifter to transmission tunnel Uses factory shift selector rod
    Show More Show Less


    BMW E36 M3 Evo - Race Differential Front Mount Bushing - Black Series...
    2X Entries For Our Spin To Win Sweepstakes!
    For European E36 M3 ONLY
    Powerflex Black Series - Corporate Logo
    T#:379934
    Part#: PFR5-324B
    Ships in 1 Business Day
    Sale - Save 15% $ 56.99

    This product was last offered at the strikethrough price on
    11-15-2026

    $ 48.44 USD
    Free Shipping on orders $49 and up
    Sale - Save 15%
    $ 56.99

    This product was last offered at the strikethrough price on
    11-15-2026

    $ 48.44 USD
    Free Shipping on orders $49 and up
    Differentials serve the key purpose of transmitting power from the driveshaft to the axles. Factory rubber bushings absorb some of this power to allow for cushy, comfortable acceleration, at the expense of performance. Many OEM differential bushings are fast-wearing and failure-prone, resulting in driveline slop and thunks when shifting or going over bumps. Your E36 Evo M3 will improve in: Improved Handling and Stability - Upgrading to an aftermarket rear differential front mount bushing can do wonders for your car's handling and stability. These bushings are designed with performance in mind, reducing unwanted movement of the differential. Reduced Wheel Hop - Wheel hop can be a drag, both figuratively and literally. An upgraded front mount bushing helps minimize wheel hop, especially during hard acceleration or aggressive driving. Say goodbye to that unsettling bounce and hello to smoother power delivery. Powerflex polyurethane differential bushings are firmer than OEM rubber bushings, eliminating associated driveline slop and allowing for the crisp application of power to the ground, resulting in better throttle response and control. Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the-art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings while improving performance and allowing for a more engaging driving experience. The use of Powerflex Copper Grease PCG1 is recommended for ease of installation. Periodic reapplication is recommended to extend the squeak-free service life of bushings. Powerflex Black Series bushings are the ultimate in track and race bushings. Need bushings for a car that's street-driven? Powerflex street bushings are an ideal alternative for street-driven vehicles and those that see occasional autocross or track time. Fits these BMW models: E36 Evo M3
    Show More Show Less
    DKM - Corporate Logo
    T#:639553
    Part#: MS-006-005
    Special Order: No Guaranteed ETA
    $ 1,299.99 USD
    Free Shipping on orders $49 and up

    Turner Motorsport presents the MS Twin Disc Clutch Kit (MS-006-005) by DKM®, an exceptional clutch solution designed for BMW applications. Engineered to handle 100 to 200% more torque capacity, this twin disc kit features sprung organic discs, providing increased contact surface for higher torque capacity and an extended lifecycle. The kit includes a pressure plate, organic discs, steel flywheel, pilot bearing/bushing, throw-out bearing, and alignment tool for a comprehensive clutch upgrade.

    • High Torque Capacity: Holds 100 to 200% more torque to the wheels.
    • Durable Construction: Sprung organic discs for longevity and increased contact surface.
    • Complete Kit: Includes pressure plate, discs, steel flywheel, pilot bearing/bushing, throw-out bearing, and alignment tool.
    • CNC Machined Components: Ensures precision and reliability.
    • Powerful Performance: Rated for upwards of 650 ft/lbs of torque.
    • Billet Steel Flywheels: Enhances strength and durability.
    • Practicable Pedal Feel: Offers sport-inspired performance without sacrificing pedal feel.
    • Factory-Like Engagement: Maintains a close-to-factory engagement.
    • Street Capable: Ideal for high horsepower street applications.

    Upgrade your BMW's clutch performance with the MS Twin Disc Clutch Kit from Turner Motorsport.

    Show More Show Less
    Meistersatz - Corporate Logo
    T#:374014
    Part#: 24341422513
    Ships in 3 Business Days
    $ 46.54

    This product was last offered at the strikethrough price on
    08-13-2026

    $ 41.99 USD
    Free Shipping on orders $49 and up
    $ 41.99 USD
    Free Shipping on orders $49 and up

    Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes the transmission filter and gasket.

    This item fits the following BMWs:
    1995-1999 E36 BMW M3 S50 S52

    Show More Show Less

    South Bend Clutch - Corporate Logo
    T#:28138088
    Part#: K70238HDOFESMFKT
    Ships in 1 Business Day
    $ 644.99 USD
    Free Shipping on orders $49 and up
    $ 644.99 USD
    Free Shipping on orders $49 and up

    Performance Tool - Corporate Logo
    T#:1809145
    Part#: W80510
    Ships in 1 Business Day
    $ 34.69 USD
    Free Shipping on orders $49 and up
    For turning and holding flexplates and flywheels.
    AGA Tools - Corporate Logo
    T#:5189117
    Part#: AGA-STA
    Ships in 7 Business Days
    $ 199.99 USD
    Free Shipping
    $ 199.99 USD
    Free Shipping
    Easily torque your driveshaft to specifications.

    14mm Front Differential Bushing Upgrade
    You will need to drill the diff casing & tap to M14x1.5
    Condor Speed Shop - Corporate Logo
    T#:597385
    Part#: 14MME36DIFFBU
    Ships in 2 Business Days
    $ 130.00 USD
    Free Shipping
    $ 130.00 USD
    Free Shipping
    These E36 & E36 M3 Differential Bushings from Condor Speed Shop are designed for the street and the track. You won't have to worry about any more rubbery flex in your diff mounts during hard acceleration. They use UHMW in all their suspension bushings because they are stiff, and have almost zero deflection while also absorbing vibration. It will outlast other types of rubber and polyurethane bushings.
    Show More Show Less
    Speed Sensor
    For vehicles with an automatic transmission
    ZF - Corporate Logo
    T#:591309
    Part#: 24341219316
    Ships in 1 Business Day
    $ 90.99 USD
    Free Shipping
    $ 90.99 USD
    Free Shipping

    Hazet - Corporate Logo
    T#:640838
    Part#: 1976
    Ships in 1 Business Day
    $ 99.99 USD
    Free Shipping on orders $49 and up

    Turner Motorsport Shifter Rebuild Kit - E36 M42/44, M50/2 2.5L ...
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    Packaged by Turner - Corporate Logo
    T#:555756
    Part#: PBTSRKT45
    Ships in 1-2 days
    $ 306.99

    This product was last offered at the strikethrough price on
    11-11-2026

    $ 304.37 USD
    Free Shipping
    $ 304.37 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

    This kit is perfect to restore your driving pleasure!

    See the included components under Kit Contents below.

    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:214508
    Part#: 33131204568
    Ships in 4 Business Days
    3% off MSRP $ 108.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 105.99 USD
    Free Shipping
    3% off MSRP
    $ 108.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 105.99 USD
    Free Shipping


    Genuine BMW Tapered Roller Bearing -

    This item fits the following BMW Chassis:
    E36

    >
    Genuine BMW Universal Flex Disc
    For vehicles with automatic transmissions only
    Genuine BMW - Corporate Logo
    T#:368030
    Part#: 26111225624
    Ships in 1-2 days
    6% off MSRP $ 213.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 200.99 USD
    Free Shipping
    6% off MSRP
    $ 213.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 200.99 USD
    Free Shipping


    Sachs - Corporate Logo
    T#:19602
    Part#: 21212228065
    Ships in 5 Business Days
    $ 234.99 USD
    Free Shipping
    $ 234.99 USD
    Free Shipping


    RMFD PRESSURE PLATE FOR TWIN 21212228065 Manufactured by Sachs

    Genuine BMW - Corporate Logo
    T#:572359
    Part#: 23128742716
    Ships in 1-2 days
    2% off MSRP $ 54.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 53.99 USD
    Free Shipping on orders $49 and up
    2% off MSRP
    $ 54.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 53.99 USD
    Free Shipping on orders $49 and up