Packaged by Turner for BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:348543
Part#: TMS11810DK
Back Ordered
$ 1,515.99

This product was last offered at the strikethrough price on
04-17-2026

Starting at $ 1,070.99 USD
Free Shipping
Starting at $ 1,070.99 USD
Free Shipping

This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance. 

We sell the basic strut and shock mount package, which includes:

  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets

In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included. 

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty! 

This item fits the following BMWs:
1995 E36 BMW M3

Show More Show Less
ClutchMasters Complete Clutch Kit W/ Aluminum Flywheel - FX350 Stage ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41931256
Part#: FW-140-AL-350TKT
In Stock
$ 1,276.99 USD
$ 1,276.99 USD
For BMW owners seeking a clutch that can handle serious power without sacrificing driveability, the ClutchMasters FX350 Stage 3+ with Aluminum Flywheel delivers a perfect balance of performance, reliability, and control.
Show More Show Less
ClutchMasters Complete Clutch Kit W/ Aluminum Flywheel - FX100 Stage ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41897512
Part#: FW-140-AL-100TKT
In Stock
$ 1,127.99 USD
$ 1,127.99 USD
For BMW drivers looking to retain factory-like driving dynamics while enjoying upgraded clutch durability and responsiveness, the ClutchMasters FX100 Stage 1 w/ Aluminum Flywheel – from Turner Motorsport is the smart, balanced choice.
Show More Show Less

ClutchMasters Complete Clutch Kit W/ Aluminum Flywheel - FX300 Stage ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41931254
Part#: FW-140-AL-300TKT
Ships in 7 Business Days
$ 1,336.99 USD
$ 1,336.99 USD
For BMW drivers who demand more from every gear change, this clutch and flywheel kit is the proven upgrade that delivers power, precision, and reliability in one comprehensive package.

ClutchMasters FX400 Stage 4 Complete 6 Puck Clutch Kit W/ Aluminum Fl...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41931260
Part#: FW140AL4006TKT
Ships in 3 Business Days
$ 1,276.99 USD
$ 1,276.99 USD
For serious drivers looking to upgrade their BMW’s clutch system for extreme power and precision, the ClutchMasters FX400 Stage 4 with Aluminum Flywheel delivers uncompromising performance, reliability, and control with the ability to handle up to a 170% increase in power!
Show More Show Less
ClutchMasters Complete Clutch Kit W/ Aluminum Flywheel - FX200 Stage ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41897517
Part#: FW-140-AL-200TKT
Ships in 7 Business Days
$ 1,336.99 USD
$ 1,336.99 USD
The smart choice for BMW enthusiasts looking to step up clutch performance for the street or occasional track use, with confidence in every shift.

Packaged by Turner - Corporate Logo
T#:21703006
Part#: T31122228461NCKT
In Stock
Sale - Save 7% $ 516.99

This product was last offered at the strikethrough price on
03-02-2026

$ 480.90 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 516.99

This product was last offered at the strikethrough price on
03-02-2026

$ 480.90 USD
Free Shipping on orders $49 and up
ClutchMasters Complete 8 Puck Clutch Kit W/ Aluminum Flywheel -FX400 ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41931258
Part#: FW-140-AL-400TKT
Ships in 3 Business Days
$ 1,276.99 USD
$ 1,276.99 USD
The ClutchMasters FX400 Stage 4 with Aluminum Flywheel is the ultimate solution for BMW enthusiasts pushing the envelope of performance and reliability on and off the track. Rated for 170% power increase over stock!
Show More Show Less

ClutchMasters Complete Clutch Kit W/ Aluminum Flywheel - FX250 Stage ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Packaged by Turner - Corporate Logo
T#:41931253
Part#: FW-140-AL-250TKT
Ships in 7 Business Days
$ 1,226.99 USD
$ 1,226.99 USD
Whether you're upgrading a street-tuned E46, an F-series M car, or a track-prepped BMW project, the ClutchMasters FX250 Stage 2+ with Aluminum Flywheel offers the ideal balance of drivability and performance to meet your demands.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:338683
Part#: TMS14283
Ships on Sep 10, 2026
$ 98.99

This product was last offered at the strikethrough price on
08-13-2026

Starting at $ 94.83 USD
Free Shipping
Starting at $ 94.83 USD
Free Shipping
Don't up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your E36 318i will ensure you get many more miles from your treasured BMW.

This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • install or clean magnetic drain plug
  • replace drain bolt crush washer
  • reset oil service/maintenance light
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire, including pressure, and tire-changing tools
  • inspect belts for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • lubricate throttle linkage
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
30,000 Mile Major Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line MTL or Motul 75W80
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
60,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line MTL or Motul 75W80
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • inspect main accessory pulleys for cracks
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement

You may also want to pick up these other helpful items:
  • replace your drain plug with a magnetic one
  • Bentley Service Manual
  • Peake Fault Code Scanner and Service Light Reset Tool
    This package fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic with manual transmission


    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:56616386
    Part#: E36OILCLRKT
    Ships on Sep 9, 2026
    New Item
    $ 1,149.99 USD
    $ 1,149.99 USD
    We’ve curated the ultimate complete retrofit kit that adapts the legendary Euro S50 oil filter housing to your US spec M50, M52, S50, or S52 engine. Featuring an upgraded CSF Euro Spec all-aluminum oil cooler, custom mounting brackets, and all necessary OEM seals, lines, and conversion hardware
    Show More Show Less
    6-Piston Front Big Brake Kit (325X25)
    Requires the use of 17" or larger wheels
    Packaged by Turner - Corporate Logo
    T#:5416777
    Part#: 341136462ATMSKT
    In Stock
    $ 2,759.99 USD
    $ 2,759.99 USD
    Give your BMW incredible stopping power with less brake fade - featuring 2-piece rotors. Big Brake Kit includes: 6-piston calipers from the E82, E88 and the E9X BMW Performance big brake kit, with original equipment pads 325x25 2-piece rotors Caliper brackets Exact Fit braided stainless reinforced brake lines All necessary hardware, including pad sensor, caliper and carrier bolts, and rotor screws. One liter Pentosin Super DOT4 Brake Fluid Brake bias will not be dramatically affected. For track applications, a more aggressive rear pad is recommended. Most 17” wheels will clear these calipers. The four (4) longer bolts pictured will come attached to the OEM caliper carrier. This carrier must be removed and replaced with the bigger caliper carrier.
    Show More Show Less


    Complete Rear Upper Shock Mounting Kit
    Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your da
    Packaged by Turner - Corporate Logo
    T#:15677562
    Part#: 07119905374-KT
    In Stock at Vendor
    Sale - Save 17% $ 115.30

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 95.97 USD
    Free Shipping on orders $49 and up
    Sale - Save 17%
    $ 115.30

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 95.97 USD
    Free Shipping on orders $49 and up
    Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty ECS rear shock mount reinforcement plates Locking nuts
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:556712
    Part#: E36M44TISKT2
    Ships on Sep 15, 2026
    Sale - Save 4% $ 684.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 659.54 USD
    Free Shipping
    Sale - Save 4%
    $ 684.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 659.54 USD
    Free Shipping

    Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

    To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

    See kit contents below for a complete list of included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:41695007
    Part#: INT-0008.1TKT
    Ships on Sep 21, 2026
    $ 1,779.99 USD
    Free Shipping on orders $49 and up
    Give your E36 a sleek, modern upgrade inspired by Porsche—now with a wireless module included!

    Packaged by Turner - Corporate Logo
    T#:24145971
    Part#: X52CYLHDRPKT
    Ships on Feb 15, 2027
    Sale - Save 3% $ 3,910.92

    This product was last offered at the strikethrough price on
    04-06-2026

    $ 3,807.77 USD
    Sale - Save 3%
    $ 3,910.92

    This product was last offered at the strikethrough price on
    04-06-2026

    $ 3,807.77 USD
    Introducing the Complete Cylinder Head Ultimate Replacement Kit for BMW E36, E34, E39, Z3 with M52, S50, and S52 engines - your ultimate solution for efficient and cost-effective engine maintenance. This comprehensive kit is designed to maximize the performance, durability, and longevity of your BMW, ensuring it operates at peak efficiency for years to come. Optimal Engine Performance: Our Complete Cylinder Head Basic Replacement Kit is engineered to enhance your BMW's engine performance. By replacing the cylinder head, you can restore lost power and torque, resulting in improved acceleration and overall driving experience. Improved Fuel Efficiency: Upgrading your BMW with our kit not only boosts power but also enhances fuel efficiency. This means you'll save money on fuel costs while reducing your carbon footprint. Enhanced Durability: The components included in this kit are crafted from high-quality materials, ensuring long-lasting durability. This translates to fewer repairs and less downtime for your vehicle. Cost Savings: Investing in this comprehensive kit is more cost effective than purchasing individual components. It contains everything you need for a cylinder head replacement, eliminating the hassle of sourcing parts separately. OEM-Quality Parts: We prioritize quality and reliability, which is why our kit features OEM-equivalent or superior components. Rest assured that you're getting the best value for your money. Fits Multiple BMW Models: This kit is compatible with various BMW models, including E36, E34, E39, and Z3, with M52, S50, and S52 engines. This versatility ensures that a wide range of BMW enthusiasts can benefit from it. Extended Engine Lifespan: By replacing the cylinder head with our kit, you can significantly extend the lifespan of your BMW engine, leading to more trouble-free miles on the road. Satisfaction Guaranteed: Some kit components are covered by our Lifetime Replacement Program. We stand behind the quality of our Complete Cylinder Head Basic Replacement Kit. Your satisfaction is our priority, and we offer a satisfaction guarantee to provide peace of mind to our valued customers. Kit includes: 1 - BMW Coolant / Anitfreeze 7 - BMW TwinPower Turbo 5W-30 Engine Oil - 1 Liter 1 - Cylinder Head Bolt Kit 1 - Cylinder Head Installation Kit 14 - Cylinder Head Washer - Cylinder Head Bolts 1 - Engine Oil Drain Plug 28 - Exhaust Manifold Nuts 1 - Liquid Assembly Lube - 12 oz 1 - M52 / S52 Cylinder Head - Complete 1 - Turner Motorsport Sticker 1 - Oil Filter Kit 6 - Bremi Ignition Coils 6 - Camshaft Position Sensor 6 - Bosch Spark Plugs
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:55317695
    Part#: VDOHUKT2
    Ships on Sep 21, 2026
    New Item
    $ 220.99

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 197.99 USD
    Free Shipping on orders $49 and up
    $ 197.99 USD
    Free Shipping on orders $49 and up
    If you’re looking to bring modern tech into your cockpit without ruining that classic, factory-correct BMW aesthetic, the VDO Continental Bluetooth Head Unit Upgrade Kit is exactly what you need.
    Packaged by Turner - Corporate Logo
    T#:21407083
    Part#: ALZ-18X859WTM
    Ships on Sep 25, 2026
    Sale - Save 17% $ 1,695.99

    This product was last offered at the strikethrough price on
    03-01-2026

    Starting at $ 1,401.00 USD
    Sale - Save 17%
    $ 1,695.99

    This product was last offered at the strikethrough price on
    03-01-2026

    Starting at $ 1,401.00 USD
    Turner Motorsport has taken the hard out of picking the correct fitment for wheels, tires, and valve stems for your E34, E36, E46, E53, E8X, E9X, F0X, F1X, F3X, and F3X. Easily pick from the style you like, and the tires you prefer, and don't forget about the valve stems! There has never been an easier way to get the wheels and tires you need by using our Packaged By Turner options!
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554551
    Part#: 11510393338KT8
    Ships on Oct 29, 2026
    $ 706.99

    This product was last offered at the strikethrough price on
    08-13-2026

    $ 669.99 USD
    $ 669.99 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E36 318i/is/ic with the M44 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

     

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554549
    Part#: 11510393338KT7
    Ships on Oct 29, 2026
    $ 745.99

    This product was last offered at the strikethrough price on
    08-13-2026

    $ 708.99 USD
    Free Shipping
    $ 708.99 USD
    Free Shipping

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E36 318i/is/ic with the M42 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

     

     

    Show More Show Less

    Accessory Belt Service Kit - E36 Z3 M44 1.9L
    For Vehicles Equipped with a 70A Alternator
    Packaged by Turner - Corporate Logo
    T#:30430711
    Part#: 11281437369KT2
    Ships on Oct 29, 2026
    Sale - Save 5% $ 171.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 163.15 USD
    Free Shipping on orders $49 and up
    Sale - Save 5%
    $ 171.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 163.15 USD
    Free Shipping on orders $49 and up

    Don't let an accessory belt failure leave you stranded! Over time, the tensioner and belt wear out, risking your alternator's ability to charge and your vehicle's overall reliability. Turner Motorsport has assembled a comprehensive belt drive service kit to keep everything in check and ensure smooth operation.

    Key Benefits:

    Complete Service Kit: Includes all necessary components to maintain your belt drive system. Enhanced Reliability: Prevents unexpected belt failures and keeps your vehicle running smoothly. Optimized Performance: Ensures your alternator and A/C system function efficiently. Kit Contents:

    Accessory Belt Belt Tensioner Assembly A/C Belt Maintain your BMW's performance and reliability with the Turner Motorsport drive belt service kit!

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:56254753
    Part#: B8800120KT2
    Ships on Oct 19, 2026
    New Item
    $ 177.99 USD
    Free Shipping on orders $49 and up
    Combining a heavy duty hub adapter with dedicated slide hammer and impact force screw attachments, this kit is built for serious mechanics and track day drivers who need unyielding strength to get the job done right the first time.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:582930
    Part#: T31126758513KT
    Ships on Nov 18, 2026
    Sale - Save 14% $ 908.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 784.55 USD
    Sale - Save 14%
    $ 908.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 784.55 USD

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 3 kit replaces:

    Control Arms
    Outer Tie Rods
    Sway Bar End Links
    Strut Tower Reinforcement Plate
    Strut Mount & Gasket

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:45039730
    Part#: 32411141953-KT
    Ships on Feb 15, 2027
    Sale - Save 3% $ 365.99

    This product was last offered at the strikethrough price on
    06-22-2026

    $ 353.94 USD
    Free Shipping on orders $49 and up
    Sale - Save 3%
    $ 365.99

    This product was last offered at the strikethrough price on
    06-22-2026

    $ 353.94 USD
    Free Shipping on orders $49 and up
    Packaged by Turner - Corporate Logo
    T#:15777298
    Part#: 311267585130-KT
    Ships on Dec 16, 2026
    Sale - Save 1% $ 365.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 362.75 USD
    Free Shipping on orders $49 and up
    Sale - Save 1%
    $ 365.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 362.75 USD
    Free Shipping on orders $49 and up
    Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 includes: Front control arms with ball joints Turner Motorsport Polyurethane Control arm bushings with brackets - Upgraded performance, No more wrestling to install! All necessary hardware
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:56291051
    Part#: 11522243303KT2
    Ships on Dec 16, 2026
    New Item
    $ 132.12 USD
    Free Shipping on orders $49 and up
    This Euro Fan & Clutch Package combines the proven Vaico 11 blade European Fan Blade with a robust URO Viscous Fan Clutch and mounting hardware to keep coolant temperatures under control when under heavy load.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:24577348
    Part#: E36S50FRSRKT
    Ships on Feb 15, 2027
    $ 3,154.99

    This product was last offered at the strikethrough price on
    03-02-2026

    $ 2,671.99 USD
    $ 2,671.99 USD
    This kit includes all of the necessary high-quality aftermarket parts to completely rebuild your front and rear suspension in one comprehensive package! Level 3 includes: 2 front control arms 2 control arm bushings 4 sway bar end links 2 tie rod assemblies 2 strut mounts 2 strut mount gaskets 2 strut mount reinforcement plates 2 Heavy Duty ECS rear shock mount reinforcement plates 2 rear upper control arm bushings 2 camber arm bushings 4 rear upper and lower trailing arm ball joint upgrade 1 differential bushing 4 rear subframe bushings 2 trailing arm bushings 2 rear shock mount gaskets 2 upgraded rear shock mounts from the E46 M3 4 ECS RTAB limiters Adding strut reinforcement plates will help prevent the deformation of the strut tower and possible cracking. Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:340160
    Part#: E36EURO-ST1
    Ships on Feb 15, 2027
    $ 781.99

    This product was last offered at the strikethrough price on
    03-04-2026

    Starting at $ 644.62 USD
    Free Shipping on orders $49 and up
    Starting at $ 644.62 USD
    Free Shipping on orders $49 and up
    E36 M3 OBD-I Stage 1 Performance Package
    Peak Power Gain: +32hp / +23ft-lbs
    Rev limit: 7000
    Octane: 91 or higher

    A fantastic upgrade package for the 1995 3.0-liter E36 M3! This special package combines some of our most popular upgrades for a lot of horsepower and less money!!! It�s a great bolt-on first step for big power gains without having to go into the engine for cams or head work.

    We use the aFe 'Euro' Intake Kit, Bosch Euro HFM, and a special Conforti-TMS Performance Chip. This package retains the 3.0�s stock 17lb injectors (green top). The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. The aFe Intake uses an oiled cloth air filter for maximum air flow and excellent filtration.

    With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5� Euro HFM and Euro Intake, the M3�s engine can breathe a lot better. This kit works on all M3s with the US S50 3.0-liter engine. It will also work on the S52 3.2 if OBD-1 17lb injectors are used.Our TMS Performance Chips were also developed by Jim Conforti and tuned specifically for the Euro HFM and aFe Intake. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

    Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

    We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

    Clickhere for feedback on this package.

    1995 M3 Stage 1 Engine Upgrade Kit includes:
    aFe 'Euro' Cold Air Intake
    Euro 3.5" Bosch HFM / Mass Air Sensor
    TMS Performance Chip (we need your car's production date, choose from below)


    This kit is based on the 1995 M3's 17lb fuel injectors. If you have upgraded to 21.5lb injectors or are running a S52 3.2, see the Stage 1.5 Kit below. The 17lb injectors are barely adequate with the variable quality of fuel in the USA. Larger injectors are recommended to ensure enough high-quality octane to prevent knocking/detonation.

    Applications:
    1994-1995 E36 M3 3.0 liter

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:554688
    Part#: EFANCON2KT
    In Stock
    $ 342.99

    This product was last offered at the strikethrough price on
    04-21-2026

    $ 312.99 USD
    Free Shipping
    $ 312.99 USD
    Free Shipping

    Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

    Included in this kit:

    • 80 degree Celsius thermostat
    • 1 liter of Genuine BMW coolant
    • Water Wetter coolant additive
    • Low-temperature coolant temperature sensor/switch
    • 16 inch Electric fan 
    • Electric fan mounting kit
    • Fan controller kit with probe sensor 
    • Fan delete nut

    Fits the following BMWs:
    1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583095
    Part#: T33329061945KT6
    Back Ordered
    Sale - Save 10% $ 223.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 201.28 USD
    Free Shipping
    Sale - Save 10%
    $ 223.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 201.28 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Subframe Bushings
    Shock Mounts & Reinforcement Plates
    Diff Bushings
    Trailing Arm Bushings
    Sway Bar End Links
    Self Locking Collar Nut

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:583044
    Part#: T33329061945KT1
    Back Ordered
    Sale - Save 20% $ 145.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 117.18 USD
    Free Shipping
    Sale - Save 20%
    $ 145.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 117.18 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Shock Mounts & Gaskets
    Reinforcement Plates
    Trailing Arm Bushings
    Hardware

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:340163
    Part#: E36ICMOUNTKIT
    Back Ordered
    Sale - Save 3% $ 357.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 348.31 USD
    Free Shipping
    Sale - Save 3%
    $ 357.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 348.31 USD
    Free Shipping
    The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates , front strut tower paper gaskets, two  rear shock tower reinforcement plates , ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.

    You can choose from the HD OEM Rear Mounts , the " Repair Shop" Lifetime Warranty Mounts , or the High Performance Aluminum & Rubber Mounts . Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.

    When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strutinstall.

    Choose your product options below.


    This item fits the following BMWs:
    1994-1998 E36 BMW 318ic 323ic 325ic 328ic M3 Convertible
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:55965851
    Part#: E36M3SACHSSETKT3
    Back Ordered
    New Item
    $ 873.99 USD
    Free Shipping on orders $49 and up
    Restore your E36 M3’s chassis dynamics to factory specification with this premium Sachs damper overhaul kit.
    Packaged by Turner - Corporate Logo
    T#:55965852
    Part#: E36M3SACHSSETKT4
    Back Ordered
    New Item
    $ 643.99 USD
    Free Shipping on orders $49 and up
    Over time, factory dampening degradation compromises overall cornering precision. This kit pairs the left and right Sachs front strut assemblies to fully restore your E36 M3’s original handling dynamics and ride compliance.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:30430686
    Part#: 11281703943KT3
    Ships on Nov 12, 2026
    Sale - Save 8% $ 267.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 246.54 USD
    Free Shipping on orders $49 and up
    Sale - Save 8%
    $ 267.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 246.54 USD
    Free Shipping on orders $49 and up

    Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.

    To solve this issue, the enthusiasts at Turner Motorsport assembled this kit with high-quality components. Furthermore, an ECS Tuning High-Performance Kevlar-reinforced accessory belt is included for boosting both engine bay aesthetics and reliability.

    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:338686
    Part#: E36EURO-ST1.5
    Back Ordered
    Sale - Save 20% $ 1,476.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 1,181.59 USD
    Free Shipping
    Sale - Save 20%
    $ 1,476.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 1,181.59 USD
    Free Shipping
    E36 M3 OBD-I Stage 1.5 Performance Package
    Peak Power Gain: +32hp / +23ft-lbs
    Rev limit: 7000
    Octane: 91 or higher

    This Stage 1.5 Package adds the option of larger 21.5lb fuel injectors to the Stage 1 Euro HFM kit. The 21.5lb injectors (23lb at BMW's 3.5 bar) were standard on the S52 3.2-liter engines. Because that engine has found its way into many other E36s, we put this kit together to use the Euro HFM, intake, and the stock 3.2 injectors. Also, it's been necessary for some people to add more fuel to account for cleaner-burning gasoline used in the US. With the lower grade fuel, pinging, knocking, or lean conditions may be experienced with the stock 3.0 injectors. The issues people are having seem to be geography-related (California, the Northeast, etc.) but many people feel safer having a fuel 'safety net' and this Package meets their goals. We also offer a Stage 2 Package with 24lb injectors if these are still not flowing enough fuel. There is no performance gain with only adding the 21.5lb injectors.

    We use the aFe 'Euro' Intake Kit, Bosch Euro HFM, Bosch 21.5lb injectors, and a special TMS Stage 1.5 Performance Chip. The aFe intake is made with heat-blocking materials, reducing underhood emperatures and not contributing to heat soak of the air filter. The aFE intake uses an oiled cotton air filter for maximum air flow and excellent filtration.

    With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5� Euro HFM and Euro Intake, the M3�s engine can breathe a lot better. This kit works on all 1995-1999 M3s with the US S50 3.0-liter or S52 3.2-liter engine (and using OBD-I engine computer).Our TMS Performance Chip is tuned specifically for the Euro HFM, aFe Intake, and 21.5lb injectors. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management.

    Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

    We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

    Clickhere for feedback on this package.

    E36 M3 Stage 1.5 Engine Upgrade Kit includes:
    aFe 'Euro' Cold Air Intake (filter, heat shield, intake tube)
    Bosch Euro M3 HFM
    HFM adapter
    TMS Performance Chip (we need your car's production date, choose from below)

    21.5lb Fuel Injectors
    This kit is sold without the fuel injectors but we can sell you a new set. Select the option below if you would like new Bosch injectors sent with your order. Otherwise, all M52 2.8 and S52 3.2 liter engines came with them so there are lots of used injectors available from eBay, forums, Craigslist, etc.

    Applications:
    1995 E36 M3 3.0 (21.5lb injectors required) (manual transmission only)
    1996-99 E36 M3 3.2 (manual transmission only) only for cars with OBD1 conversion
    any S50 or S52 with OBD-1 in an E36 (330i, 332i, 332ti, etc)
    Show More Show Less