Requires shorter flywheel bolts - 8x (P# 11227805885) - T#12322

Lightweight flywheels have proven themselves to be a worthwhile performance enhancement. But with the quicker throttle response and horsepower improvement comes one serious drawback: flywheel chatter. Without the dual-mass flywheel's rubber isolators, a lightweight aluminum flywheel has more rattle than stock. ECS has designed this flywheel using chrom-moly steel and it weighs almost ten pounds less than the stock DMF but not as extreme as full aluminum flywheels. The steel helps dampen vibration and noise so you get near-factory refinement and most of the benefits of a lightweight flywheel: quicker throttle response, better reliability, and more power to the wheels. This flywheel requires the E34 M5 sprung hub clutch kit.

Modern flywheels are built with additional components that are designed to dampen and minimize vibrations from the engine and transmission. Weight has increased and reliability has decreased. With additional weight more energy is required for it to move. A lightweight flywheel does away with the dual mass design and its additional mass so more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance. And with a single-mass flywheel the unreliable DMF design is eliminated.

Stock flywheel weight - 25.0lbs
ECS flywheel weight = 16.55lbs

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed)

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (we make 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

This kit is for purchase only. It's perfect for shops or racecars where changing wheels or brakes is common. We also have kits that are available for rent.

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

Upgrade Your BMW Shifter with the BMW Teflon Shifter Bushing Kit

• Enhanced shifting precision for a smoother driving experience
• Durable Teflon construction for long-lasting performance
• Reduces play and slop in the shifter mechanism
• Easy installation with included hardware and instructions

Enhance the performance of your BMW's shifter with the BMW Teflon Shifter Bushing Kit. This kit is designed to provide enhanced shifting precision, resulting in a smoother and more responsive driving experience. Crafted from durable Teflon material, these bushings offer long-lasting performance and reliability. By reducing play and slop in the shifter mechanism, this kit ensures precise gear changes every time you shift. Installation is quick and easy with the included hardware and detailed instructions, allowing you to enjoy the benefits of improved shifter performance in no time.

Enhance your BMW's wheel changing process with a stud conversion kit, facilitating faster and more convenient wheel swaps. This kit includes 20 Conical Seat Lug Nuts and 20 78mm Wheel Studs, offering a permanent wheel-hanging solution that saves time and hassle. By screwing in the provided studs, you'll be ready to go without complexities.

Product Benefits:

• Permanent wheel-hanging solution
• Saves time and hassle during wheel changes
• Versatile use with spacers of up to 30mm
• Facilitates easier wheel installation
• Reduces wear on wheel hubs

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.

Looking to eliminate your dual-mass flywheel? Overwhelmed with all the options, but hearing complaints about so many of them with rattling or chatter from them? Problem solved. Introducing the all-new Lightweight Performance Flywheel from ECS Tuning. Engineered in-house with the enthusiast daily driver in mind, this is the perfect option for those wanting a lightweight flywheel without the annoying chatter heard from so many other options on the market. Designed to accommodate all conditions: from Sunday drives through the country, to the abuse of the track. No matter your driving style or ability, this is the flywheel and clutch kit for you.

Key Features:

Eliminates factory dual-mass flywheel for:
Crisper shifts
Improved throttle response
Improved acceleration (We measured a .4s decrease in 0-60 times on an otherwise-stock E36 328i!)
Lower replacement cost
Hardened 4140 Chromoly Steel for excellent engagement feel and wear resistance; zinc plated for corrosion resistance
Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel
Sprung-hub clutch disc to eliminate chatter at idle and reduce driveline shock loading
Weighs in at just 16.5lbs!
SFI tested and certified to ensure safe operation under all conditions
Includes ECS performance flywheel, clutch kit with throwout bearing, pilot bearing and all flywheel and pressure plate hardware
Why is SFI testing and certification important?

The SFI Foundation, Inc. (SFI) is a non-profit organization established to issue and administer standards for the quality assurance of specialty performance and racing equipment. SFI certification indicates a flywheel has been certified using industry-standard SFI Spec 1.1 standards by an independent testing body to ensure quality of both design and materials for flywheels utilized in competitive motorsports.

Having successfully passed SFI certification, this flywheel has an individual SFI serial number found in a laser etching, and on an affixed sticker. This certification means the ECS-engineered flywheel is safe and reliable during the rigors of competitive racing; it's also safe and reliable for years and years of street use.

Wheel Stud Conversion Kit - Full Set: Upgrade Your BMW's Wheels

• Allows for easier wheel installation and removal
• Provides a more secure wheel mounting solution
• Eliminates the risk of stripped lug nuts
• Enhances the appearance of your BMW's wheels

Upgrade your BMW's wheels with the Wheel Stud Conversion Kit - Full Set. This kit includes everything you need to convert your lug bolts to wheel studs, allowing for easier wheel installation and removal. Additionally, it provides a more secure wheel mounting solution, reducing the risk of stripped lug nuts. With this conversion kit, you can also enhance the appearance of your BMW's wheels for a more aggressive and sporty look.

Enhance your BMW's wheel change process with a stud conversion kit. This comprehensive kit includes Conical Seat Lug Nuts (20) and 56mm Wheel Studs (20), providing a permanent solution for faster and easier wheel changes. By installing the supplied studs, you'll have permanent wheel hangers, reducing installation time and hassle significantly.

• Offers permanent wheel hangers for quicker and simpler wheel changes
• Allows accommodation of various spacer widths in one application
• Simplifies wheel installation by using wheel studs as hangers
• Reduces wear on wheel hubs, ensuring less premature wear
• Facilitates quick and easy tire changes due to the retained wheel studs

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 10mm.

Changing the appearance of your BMW has never been easier thanks to ECS Tuning. This M3 replica bumper kit will do up your front bumper to give it a more aggressive appearance. Unlike the other replica bumpers, these are made to fit your car perfectly and will for years.

This kit includes the front bumper cover, mesh grille, smooth trim, and front lip. Each M3 replica part is of high quality and produced for longevity and durability.

Upgrade your BMW's wheel system effortlessly with this stud conversion kit, comprising Conical Seat Lug Nuts (20) and 70mm Wheel Studs (20). This conversion provides a permanent solution for wheel changes, saving you valuable time and minimizing hassle. With the simple screw-in installation of the supplied studs, you'll experience enhanced efficiency.

• Permanent wheel hangers for quicker wheel changes
• Time-saving and hassle-free solution
• Facilitates easier wheel installation and removal
• Minimizes wear on wheel hubs
• Quick and easy tire changes
• Supports spacers up to 20mm

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm.

Turner Motorsport Replacement Air Filter Element

Discover superior airflow and filtration efficiency with the Replacement Air Filter Element from Turner Motorsport. Engineered for use in various Turner Motorsport Luft-Technik or Kohlefaser Luft-Technik intake systems, this custom-spec'd air filter delivers optimal performance.

Benefits:

• High-flow design for optimal airflow
• Reusable cotton gauze construction
• Precision engineering and testing by Turner Motorsport
• FARO laser scanning, SolidWorks 3D CAD modeling, and in-house 3D printing for quality assurance
• In-house Superflow SF-750 Flowbench tested for 475 CFM at 10" H20
• Dimensions: Flange ID - 3.125", Flange Height - 1.50", Base OD - 5.0", Filter Height - 7.0", Top OD - 4.5"

Upgrade your air filtration system with the Turner Motorsport Replacement Air Filter Element, meticulously designed for performance and longevity.

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the OVAL shifter carrier bushings (some BMW models have round bushings).

This item fits the following BMWs:
1992-1998 E36 BMW 328i 328is 328ic M3
1999-2002 E46 BMW 328i 328ci 330i 330ci
2001-2006 E46 BMW M3
1997-2003 E39 BMW 540i M5
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
1999-2003 E52 BMW Z8

Urethane mounts keep the differential from twisting under load. As torque is put through the driveline it causes anything to twist and move. The differential is mounted to the subframe and the twisting and deflection can be transferred to the rest of the chassis. With a stiffer mount the differential will not deflect as much. This improves seat-of-the-pants feeling to the driver, giving more feedback for smoother power delivery. In theory, there's also more torque being sent to the drive wheels since it's not being used up shifting the diff weight around.

These are tough 88A durometer urethane bushings with a anodized almunum center sleeve, engineered by ECS. This is a set of E36 diff bushings - 1 for the front and 2 for the rear cover. New high-grade hardware is included (the front bolt has a tendency to snap from all that torque twisting!).

Upgrade Your BMW's Wheel System with a Stud Conversion Kit

Upgrade your BMW's wheel system with a stud conversion kit, designed to facilitate quicker and easier wheel changes. This kit comprises Conical Seat Lug Nuts (10) and 70mm Wheel Studs (10), ensuring hassle-free and time-saving wheel swaps. Simply install the provided studs, granting permanent wheel hangers for effortless wheel mounting.

Key Benefits:

• Permanent wheel hangers for simplified and quicker wheel changes
• Enhanced confidence in wheel-to-hub contact, ideal for racing purposes
• Accommodates various spacer widths, eliminating the need for custom lengths
• Facilitates easier wheel installation, using studs as wheel hangers while nuts secure the wheel
• Reduces wear on wheel hubs, enhancing longevity
• Streamlines tire changes with studs remaining in the hub for swift removal/installation

Upgrade your BMW's wheel setup effortlessly and ensure quicker wheel changes with a stud conversion kit, offering improved wheel-to-hub contact, ease of installation, and reduced wear on wheel hubs.

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Upgrade your vehicle's lighting with Ziza Platinum White 9006 bulbs, replacing stock bulbs with a clean white light for enhanced visibility. As a leading manufacturer and distributor of performance automotive lighting products, Ziza brings innovation to LED bulbs, HID bulbs, clear lens side markers, smoked lens side markers, and more. Take your automotive lighting to the next level with Ziza's high-quality products.

This non-DOT approved product is for Off-road/Track use only. Not approved for legal street use

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M