Showing 10159 results for ""

Is your BMW experiencing performance issues or poor gas mileage? The air flow sensor plays a crucial role in regulating fuel mixture. If it's faulty, your vehicle might be adding too much or too little fuel, leading to subpar performance. Revitalize your car's mileage and power by replacing the air flow sensor. It's a simple DIY task with basic hand tools, and the benefits are immediate.

• Common solution for BMW engine running issues.
• Even without air mass sensor codes, a new air mass sensor on OBD2 BMWs can significantly enhance engine smoothness.
• Optimizes fuel economy for a more efficient driving experience.

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1998 - 2004 E39 Touring 525i 528i 540i
1996 - 2004 E39 Sedan 525i 528i 530i 540i 
2000 - 2004 E52 Z8 Roadster

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Shock Mounts
Ball Joints
Hardware

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes Redline D4 ATF, the transmission filter, gasket and bolts. This filter fits A4S 270R/310R automatic transmissions on BMW E36 318i 318is 318ic 318it 323is 323ic 325i 325is 325ic 328i 328is 328ic. E34 525i M50. E39 528i Z3 2.3 2.8. 

Kit Includes:

• Automatic transmission filter with associated hardware
• Oil pan gaskets with hardware
• Fill plug with sealing washer
• 7 quarts Redline D4 automatic transmission fluid

This item fits the following BMWs: 
1992-1999  E36 BMW  318i 318is 318ic 318ti 323is 323ic 325i 325is 325ic 328i 328is 328ic 
1991-1995  E34 BMW  525i 
1997-09/1999  E39 BMW  528i 
1997-2000  Z3 BMW  Z3 2.3 Z3 2.8

Adjustable Rebound Damping

This system intended for the experienced E39 M5 driver who wants to determine the individual lowering of his vehicle, and also wants to make setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll of the car and therefore the driving pleasure can be adapted to your requirements.

• Individually adjustable rebound
• Stainless steel technology "inox-line"
• Individually height-adjustable - Front = 35-65mm lowering; Rear = 20-50mm lowering,
• TUV approved lowering range
• High-quality component parts for long durability

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2000-2003 E39 BMW M5

These Koni shocks and struts have been specially built to match the spring rate and lowering for Dinan Performance springs. They are similar to a standard Koni Sport Yellow shocks but the valving and length has been adjusted to go with the Dinan springs. These are a two-way adjustable shock, allowing you to pick an optimum setting for the driving you're doing.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

This item fits the following BMWs:
1999-2003 E39 BMW M5

The mass air flow sensor measures the amount of air flow to tell the computer how much fuel to add to the mixture. If the MAF sensor malfunctions, there could be too much or too little fuel added to the mixture. Restore performance and fuel mileage with a high quality Bosch ( #0 280 217 800) replacement. OEM replacement for BMW part # 13621702078 and 13621468625. For vehicles with a production date up to 09/1998. This sensor is also known as the "540 HFM" that is used in a variety of OBD-1 E36 M3 upgrades.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Replacement mass air sensor for the M60/M62 engine. The M60 engines have a notorious fault for hesitation and sluggish response. If this is your situation the MAF should be on your list to check. The HFM is easy to replace and could cure a variety of problems.

This replacement HFM fits the following BMWs:
1993-1995 E34 BMW 540i
1997-1998 E39 BMW 540i
1988-1994 E32 BMW 740i 740il
1995-1998 E38 BMW 740i 740il
1990-1999 E31 BMW 840i 840ci