BMW Suspension Parts for BMW 5 Series E39 (1996-2003)

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 8k Front & 6k Rear Spring Rate
• S-Barrel front & Linear rear springs
• Valved specifically to spring style and rate
• Camber Plate Front Mounts
• Aluminum and Rubber Rear Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 8k Front & 8k Rear Spring Rate
• S-Barrel front & Linear rear springs
• Valved specifically to spring style and rate
• Camber Plate Front Mounts
• Aluminum and Rubber Rear Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E39 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Made of hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

Fits the following vehicle:
1997-2003 E39 BMW 525i 528i 530i 540i M5

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides. The Dinan strut tower brace is a very high quality aluminum brace with precision machined ends that match the contours of the strut tower. Other braces simply sit on top which reduces their effectiveness. This is definitely one of the stronger strut brace designs on the market. The center bar is polished aluminum with carbon fiber inlays - an unmistakable sign of precise engineering when you open the hood.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This part is worth 2 points towards your Dinan badge.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/4" (6mm)
  
• R: -1/4" (6mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
1999-2003 E39 BMW M5

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 

• Big handling improvements
• Reasonable ride quality
• Re-buildable for custom vehicle setups
• Best KONl shock for all lowering springs
• Lifetime Warranty​

Activate your Koni Rebate!

This item fits the following BMWs:
1997-2003 E39 540i M5 (not for cars with self-leveling or EDC suspension)

Improve your BMW's handling with these performance springs designed to reduce body roll and enhance overall control. The increased spring rates not only tighten up handling but also provide a slight lowering for a lower center of gravity without sacrificing street usability. Experience reduced dive under braking, improved grip, and controlled acceleration. These springs are shot-peened for stress relief and preset to prevent spring sag. Plus, they contribute 2 points toward your Dinan badge, showcasing their quality and performance.

• Performance springs for BMW
• Reduced body roll for improved handling
• Slight lowering for a lower center of gravity
• Reduced dive under braking
• Improved grip and acceleration control
• Shot-peened for stress relief
• Preset to prevent spring sag
• Contributes 2 points toward Dinan badge

KONI's entry level performance STR.T (pronounced Street) shocks and struts bring improved handling and KONl quality to the budget minded driving enthusiast. Whether to simply refresh and upgrade a stock vehicle or to match with street performance lowering springs and other modifications, KONl STR.T provides performance at a value price point. 
 

• Entry level performance shock absorber
• Compliments lower springs
• Perfect for OE replacement or vehicle improvement
• Non-adjustable
• Lifetime Warranty

Activate your Koni Rebate!

This kit fits the following BMWs:
E39 540i (not for cars with self-leveling or EDC suspension)

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

• Front - 1.3-1.5"
• Rear - 1"

These Koni shocks and struts have been specially built to match the spring rate and lowering for Dinan Performance springs. They are similar to a standard Koni Sport Yellow shocks but the valving and length has been adjusted to go with the Dinan springs. These are a two-way adjustable shock, allowing you to pick an optimum setting for the driving you're doing.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

This item fits the following BMWs:
1999-2003 E39 BMW M5

Koni suspension has taken their long running FSD (Frequency Selective Dampening) Technology and improved upon it to create their new Special Active suspension package. Improving handling while also improving the comfort of your BMW's ride, Special Active shocks and struts prove they are a top contender in the replacement suspension market.

Koni's Special Active dampers adapt to the continuous imperfect road conditions in order to provide you with a more responsive and smoother ride. Thanks to multiple generations of suspension expertise, these shocks and struts rival expensive ride control systems of newer vehicles but at a cost that is significantly lower and a capability to be retrofitted into existing vehicles.

Designed by Koni for the vehicle's original stock ride height, these are not intended to be used with lowering springs and will perform best when paired with stock springs.

Koni Special Active Features:

• KONI’s latest generation of Frequency Selective Damping Technology
•  Improves safety and road holding
•  Technology proven on over 1.5 million factory equipped vehicles
•  Secure and stable feeling for spirited driving
•  Unrivaled aftermarket solution can be fitted to most new and older cars
•  Driving refinement for cars, trucks, SUVs, etc.
•  Technology that rivals expensive Original Equipment electronic systems
•  Performance for driver and comfort for passengers in one

Activate your Koni Rebate!

Fits the following BMWs:
03/97-2003 E39 BMW Touring models