BMW Brakes & Brake Parts for BMW 5 Series E39 (1996-2003)

Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:348112

Part#: 34211161806KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

Turner Motorsport Brake Bleeder Bottle with Check Valve - Most BMWs ...

10X Entries Into Our F80 M3 Sweepstakes

T#:176959

Part#: BBMCV

In Stock

Sale - Save 10% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD

Add to Wish List

The Turner Motorsport Brake Bleeder Bottle with Check Valve is a crucial tool in maintaining your brake system's efficiency. This bottle revolutionizes brake fluid replacement through its dependable characteristics. A necessity for all automotive enthusiasts, this bottle has been engineered to optimize brake bleeding procedures. Its standout attribute is the one-way check valve. With each downward push of the pedal, the valve opens, directing used fluid into the reservoir. As the pedal rebounds, the valve securely shuts, preventing the ingress of air. This facilitates the intake of fresh fluid from the master cylinder. This bottle effortlessly facilitates the recommended bleeding sequence, simplifying the task. Its precision lies in its ability to accurately collect expelled brake fluid, thus facilitating easy monitoring. Moreover, by keeping the master cylinder reservoir consistently filled, you can conveniently replenish fluid levels as necessary. Beyond functionality, this bleeder bottle boasts a design that significantly reduces the likelihood of messy drips and spills. After bleeding each caliper, you can detach the tube from the bleed screw and conveniently 'park' it on the vent/drain port located on the cap. This thoughtful feature maintains the cleanliness of your workspace. The Turner Motorsport Brake Bleeder Bottle with Check Valve stands as an indispensable companion for brake system maintenance. Through its incorporation of the one-way check valve and its purpose-driven design, it streamlines brake fluid upkeep, guaranteeing both the safety and performance of your vehicle. Features: One-way check valve guarantees fluid evacuation with precision while preventing air intake. Effective fluid collection and real-time monitoring throughout the process. 'Park' design for the tube minimizes instances of spills and drips, preserving the tidiness of your workspace.

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E39 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583482

Part#: 022751TMS09

In Stock

Sale - Save 10% $ 291.99

This product was last offered at the strikethrough price on
06-14-2026

$ 262.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 291.99

This product was last offered at the strikethrough price on
06-14-2026

$ 262.79 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Performance Brake Fluid Flush Kit - Level 3

10X Entries Into Our F80 M3 Sweepstakes

T#:15677547

Part#: 007237SCH01A-KT

Ships on Sep 30, 2026

Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Qty

Sale - Save 9%

$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.

Show More Show Less

Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:387871

Part#: 001359ECS01AX4KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

BMW E38 E39 Stainless Steel Brake Lines - Mid - Turner Motorsport ...

10X Entries Into Our F80 M3 Sweepstakes

T#:593618

Part#: 022751TMS05KT

In Stock

Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
06-14-2026

$ 81.59 USD

Add to Wish List

Qty

Sale - Save 15%

$ 95.99

This product was last offered at the strikethrough price on
06-14-2026

$ 81.59 USD

Add to Wish List

BMW E38 E39 Stainless Steel Brake Lines - Mid are designed to provide superior performance and durability for your braking system. Unlike factory brake lines that can expand under pressure, leading to increased pedal travel and diminished braking performance, these stainless steel lines offer exceptional resistance to expansion. Engineered and assembled with braided stainless steel mesh, they ensure a firmer pedal and more responsive braking.

Enhanced Performance: Stainless steel construction resists expansion under pressure, delivering a firmer pedal feel and improved braking performance.
Durable Design: Features a proprietary zinc-nickel coating that provides exceptional resistance to corrosion and abrasion.
Improved Aesthetics: Equipped with low-profile connectors for a clean, recessed appearance.
DOT Compliant: Fully compliant with DOT FMVSS 106 standards and burst-tested to 3000 psi for reliability.

Upgrade your BMW’s braking system with Turner Motorsport's stainless steel brake lines for a reliable and responsive driving experience.

Show More Show Less

Turner Front Stainless Steel Brake Lines - E39

10X Entries Into Our F80 M3 Sweepstakes

T#:582951

Part#: 022751TMS03

In Stock

Sale - Save 15% $ 103.99

This product was last offered at the strikethrough price on
06-14-2026

$ 88.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 103.99

This product was last offered at the strikethrough price on
06-14-2026

$ 88.39 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Rear Stainless Steel Brake Lines - E39

10X Entries Into Our F80 M3 Sweepstakes

T#:582961

Part#: 022751TMS01

In Stock

Sale - Save 5% $ 95.99

This product was last offered at the strikethrough price on
06-14-2026

$ 91.19 USD

Add to Wish List

Qty

Sale - Save 5%

$ 95.99

This product was last offered at the strikethrough price on
06-14-2026

$ 91.19 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Brake Bleeder Bottle with Magnet

10X Entries Into Our F80 M3 Sweepstakes

T#:302462

Part#: BBM

In Stock

Sale - Save 5% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

The Brake Bleeder Bottle with Magnet is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a magnet that is attached to the bottle. The magnet allows the bottle to easily attach to the car, nearby toolbox, or other metal services so you don't have to worry about the bottle while you bleed your brakes! This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Magnet is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Brake Bleeder Bottle with Lanyard

10X Entries Into Our F80 M3 Sweepstakes

T#:302461

Part#: BBL

Ships on Sep 28, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

The Brake Bleeder Bottle with Lanyard is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a metal lanyard that comes with the bottle. This metal lanyard serves as an additional means of keeping the bottle stable and in one place. You can attach the lanyard to a fixed point in your workspace, such as a vehicle frame or a nearby hook, and then secure the bottle to it. This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Lanyard is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Turner Motorsport Brake Bleeder Bottle

10X Entries Into Our F80 M3 Sweepstakes

T#:338572

Part#: TMS1196

Ships on Sep 28, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD

Add to Wish List

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD

Add to Wish List

The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder

Show More Show Less

Brake Fluid Flush Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15710809

Part#: 007091ECS02-KT

Ships on Sep 30, 2026

Sale - Save 17% $ 162.31

This product was last offered at the strikethrough price on
05-03-2026

$ 135.16 USD

Add to Wish List

Qty

Sale - Save 17%

$ 162.31

This product was last offered at the strikethrough price on
05-03-2026

$ 135.16 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first. A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush on your vehicle. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Pentosin Super DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench

Show More Show Less

Front Brake Rotors - E39 530i, E39 540i 4/2000-2003 (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:338121

Part#: 34116767059

Ships in 1 Business Day

$ 292.00

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 251.98 USD

Add to Wish List

Starting at $ 251.98 USD

Add to Wish List

This is a pair of replacement brake rotors/discs for the E39 530i and 540i (4/2000 and later production date). These are priced by the pair (one left front and one right front).

We offer a choice of brands to satisfy our customer's stringent quality standards -
Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes. Original BMW - the factory BMW rotors that you would buy at any BMW dealer but we offer them at a discounted price. These rotors also have anti-corrosion coating but are not as extensively coated as the Zimmermann. If you want a rotor that is guaranteed to perform like the original equipment what better brand is there?

These front brake discs / rotors are guaranteed to fit:
2000-2000 E39 540i sedan & touring wagon **04/2000 production and newer**
2001-2003 E39 540i sedan & touring wagon (ALL)
2001-2003 E39 530i sedan (ALL)

Show More Show Less

Rear Brake Rotors - E39 528i/525i/530i/540i (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:338135

Part#: 34211164840

Ships in 1 Business Day

$ 125.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 107.98 USD

Add to Wish List

Starting at $ 107.98 USD

Add to Wish List

These are a pair of replacement REAR rotors for all E39 models except M5. It fits the E39 525i, 528i, 530i, and 540i. A pair includes one left rotor and one right rotor.

These are direct replacement rotors from some of the best names in the business and at substantial savings from buying direct from the BMW dealer.

We offer a choice of brands to satisfy our customer's stringent quality standards -
Pagid Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors have a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is dip coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes, while the Zimmerman are only spray coated.
Balo - an original supplier to BMW but not sold through the regular BMW dealer network. We buy these from the OEM distributor to bypass the dealer for a hefty discount. These are made to the same specifications and product quality as if it had a BMW logo. The biggest difference is these will not have a corrosion-inhibiting coating so rust will form on the hub and inside the cooling vanes.
We offer a choice of brands to satisfy our customer's stringent quality standards -
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors also have a high carbon content. These are high quality and spray coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.

These rear brake discs / rotors are guaranteed to fit:
1997-2003 E39 BMW 525i 528i 530i 540i

Show More Show Less

M Performance Brembo Caliper Upgrade For E39 (not M5)

10X Entries Into Our F80 M3 Sweepstakes

T#:388184

Part#: E39135BRAKE

Ships in 3 Business Days

Starting at $ 2,218.37 USD

Add to Wish List

Starting at $ 2,218.37 USD

Add to Wish List

135/BMW Performance brakes for your E39 525i/528i/530i/540i! This kit uses the factory BMW Performance Brembo 6-piston calipers (same as 135i) with 135-sized rotors (338x26mm / 13.3") for a bolt-on braking upgrade. Everything comes complete - 6-piston calipers, rotors, custom caliper brackets, brake lines, and a pad sensor. Choose your preferred brake fluid and brake pads below (or call us for a recommendation). Brake rotor options - Zimmermann Coated - blank rotors with anti-corrosion coating Turner/Centric slotted Turner/Cetnric cross-drilled & slotted BMW Peformance floating and cross-drilled ECS 2-piece floating with cross-drilled and slotted Brake pad options - OEM Textar (same as stock 135i) Centric Posi-Quiet - nearly dust-free (Turner preferred!) Hawk Ceramic nearly dust-free Hawk HPS performance StopTech performance This is a direct fit for all non-M E39 models and comes with a lot more braking power than standard. Consequently, there will be more front brake bias - the front brakes have more bite than before. During normal street driving, all you will notice is that the brakes feel stronger. For track driving, we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit). Requires 17" wheels and wheel spacers may be required depending on wheel spoke design. Most, but not all 17” wheels will clear these calipers. To verify fitment, please see the attached template.

Show More Show Less

Front Brake Rotors - E39 525i/528i (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:338112

Part#: 34111164839

Ships in 1 day

Starting at $ 139.98 USD

Add to Wish List

Starting at $ 139.98 USD

Add to Wish List

This is a pair of FRONT brake rotors/discs for the 1997-2000 E39 528i and 2001-2003 E39 525i (including sedan and touring wagon). This is for a pair of brake rotors - one left front and one right front.

We offer a choice of brands to satisfy our customer's stringent quality standards -
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors are manufactured in Europe with a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.
Original BMW - the factory BMW rotors that you would buy at any BMW dealer but we offer them at a discounted price. These rotors also have anti-corrosion coating but are not as extensively coated as the Zimmermann. If you want a rotor that is guaranteed to perform like the original equipment what better brand is there?

These front brake discs / rotors are guaranteed to fit:
1997-2000 E39 528i sedan & 528i touring wagon
2001-2003 E39 525i sedan & 525i touring wagon

Show More Show Less

Genuine BMW ABS Sensor Socket Replacement kit - priced per side ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56471646

Part#: 61131392246KT2

Ships in 3 Business Days

$ 28.75 USD

Add to Wish List

Qty

$ 28.75 USD

Add to Wish List

This targeted harness repair kit allows you to rebuild the ABS sensor interface using genuine BMW terminal hardware. Designed to cure intermittent fault codes, wheel speed signal dropouts, and limp mode triggers

Show More Show Less

Front Brake Rotors - E39 540i -3/00, E38 740i/iL -12/00, E31 850i -8/...

10X Entries Into Our F80 M3 Sweepstakes

T#:338108

Part#: 34111159895

Ships in 1 Business Day

Starting at $ 195.98 USD

Add to Wish List

Starting at $ 195.98 USD

Add to Wish List

These are a pair of replacement FRONT rotors for E39 540i, E38 740i/iL, E31 850i, and E31 850CSi (see detailed fitment notes below). These are direct replacement rotors from some of the best names in the business and at substantial savings from buying direct from the BMW dealer.

We offer a choice of brands to satisfy our customer's stringent quality standards -
Balo - an original supplier to BMW but not sold through the regular BMW dealer network. We buy these from the OEM distributor to bypass the dealer for a hefty discount. These are made to the same specifications and product quality as if it had a BMW logo. The biggest difference is these will not have a corrosion-inhibiting coating so rust will form on the hub and inside the cooling vanes.
Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors are manufactured in Europe with a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.
Original BMW - the factory BMW rotors that you would buy at any BMW dealer but we offer them at a discounted price. These rotors also have anti-corrosion coating but are not as extensively coated as the Zimmermann. If you want a rotor that is guaranteed to perform like the original equipment what better brand is there?

These front brake discs / rotors are guaranteed to fit:
1997-2000 E39 5 Series 540i sedan & touring **up to 3/00 prod date
1995-2000 E38 7 Series 740i / 740iL **up to 2/00 prod date
1991-1993 E31 8 Series 850i (**up to 8/93 prod date)
1994-1995 E31 8 Series 850CSi

Show More Show Less

Front & Rear Brake Service Kit - E39 M5

10X Entries Into Our F80 M3 Sweepstakes

T#:29898495

Part#: 34112229527KT4

Ships in 5 Business Days

Sale - Save 18% $ 803.99

This product was last offered at the strikethrough price on
05-03-2026

$ 656.82 USD

Add to Wish List

Qty

Sale - Save 18%

$ 803.99

This product was last offered at the strikethrough price on
05-03-2026

$ 656.82 USD

Add to Wish List

Restore your BMW's braking system to its original performance with this Packaged by Turner OE Front & Rear Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete front brake overhaul, ensuring maximum braking efficiency and safety. Top Features: Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough front and rear brake service. OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance. High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality. Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control. User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process. Advantages: Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency. Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications. Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system. Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine. For a detailed list of included components, please refer to the "Kit Contents" tab.

Show More Show Less

Complete Front & Rear Brake Package - E39 530i

10X Entries Into Our F80 M3 Sweepstakes

T#:350947

Part#: TMS123

Ships in 5 Business Days

$ 574.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 542.82 USD

Add to Wish List

Starting at $ 542.82 USD

Add to Wish List

This brake package for the late-production E39 530i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - OEM, cross-drilled, slotted, or drilled+slotted
Front and rear brake pads - Axxis/PBR Metal Master, Axxis/PBR Ultimate, StopTech High Performance
Front and rear pad wear sensors
Brake fluid Ate Type 200 (OEM supplier).

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

530i Brake Package fits the following BMWs:
2001-2003 E39 BMW 530i

Show More Show Less

Complete Front & Rear Brake Package - E39 540i 1997-03/2000

10X Entries Into Our F80 M3 Sweepstakes

T#:350946

Part#: TMS4728

Ships in 5 Business Days

$ 499.99

This product was last offered at the strikethrough price on
06-09-2026

Starting at $ 488.50 USD

Add to Wish List

Starting at $ 488.50 USD

Add to Wish List

This brake package for the early-production E39 540i comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - OEM, cross-drilled, slotted, or drilled+slotted
Front and rear brake pads - Axxis/PBR Metal Master, Axxis/PBR Ultimate, StopTech High Performance
Front and rear pad wear sensors
Brake fluid Ate Type 200 (OEM supplier).

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

540i Brake Package fits the following BMWs:
1997-2/00 E39 BMW 540i

Show More Show Less

Complete Front & Rear Brake Package - E39 540i 3/2000-2003

10X Entries Into Our F80 M3 Sweepstakes

T#:340174

Part#: TMS418

Ships in 5 Business Days

$ 583.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 551.62 USD

Add to Wish List

Starting at $ 551.62 USD

Add to Wish List

This brake package for the late-production E39 540i (3/00 and later production) comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - OEM, cross-drilled, slotted, drilled+slotted
Front and rear brake pads - Axxis/PBR Metal Master, Hawk HPS, Axxis/PBR Ultimate, StopTech Street Performance
Front and rear pad wear sensors
Brake fluid Ate Type 200 (OEM supplier).

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

540 Brake Package Applications:
3/00-03 E39 540i sedan, 540i touring

Show More Show Less

Front Brake Service Kit - BMW E39 M5

10X Entries Into Our F80 M3 Sweepstakes

T#:49092429

Part#: E39M5RBSKT

Back Ordered

Sale - Save 5% $ 554.99

This product was last offered at the strikethrough price on
05-03-2026

$ 529.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 554.99

This product was last offered at the strikethrough price on
05-03-2026

$ 529.49 USD

Add to Wish List

Get everything you need for your next front brake service with the click of a button. This kit is put together by the experts at Turner, making sure you don't miss a thing.

IRP Universal Hydraulic Handbrake Fly-Off #4 - Silver

T#:401440

Part#: IRPHB-4S

In Stock

$ 254.99 USD

Add to Wish List

Qty

$ 254.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

Textar Rear Brake Pad Set - E39

T#:584295

Part#: 34216761281

In Stock

Sale - Save 42% $ 99.51

This product was last offered at the strikethrough price on
05-03-2026

$ 58.20 USD

Add to Wish List

Qty

Sale - Save 42%

$ 99.51

This product was last offered at the strikethrough price on
05-03-2026

$ 58.20 USD

Add to Wish List

Original supplier of brake pads to BMW

IRP Universal Hydraulic Handbrake Fly-Off #2 - Black

T#:401443

Part#: IRPHB-2B

In Stock

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #1 - Black

T#:401444

Part#: IRPHB-1B

Special Order: No Guaranteed ETA

$ 246.99 USD

Add to Wish List

Qty

$ 246.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake

T#:584206

Part#: IRPHBK1

Ships on Nov 4, 2026

Starting at $ 246.99 USD

Add to Wish List

Starting at $ 246.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

Rear Brake Pad Set

T#:348962

Part#: 34216761248

Ships in 1 Business Day

$ 104.55 USD

Add to Wish List

Qty

$ 104.55 USD

Add to Wish List

Textar Front Brake Pad Set - E38, E39, E53

T#:394542

Part#: 34116761252

Ships in 1-2 days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

OEM Textar brake pads surpass the quality and safety standards of the European ECE-R90 directive. Their semi-metallic friction material helps to provide maximum braking performance right from the start in every driving situation. They also feature anti-noise shims for low braking noise in accordance with O.E. standards. If it's time to replace your pads, then you should also replace your rotors to get maximum braking performance. With a new pad and rotor set on your vehicle, stopping will be completely restored. Enjoy the stopping you liked when you first obtained your vehicle. With new pads and rotors, you need to make sure they are bedded and mated with each other. To be sure they are, follow the brake pad bedding procedure on ECS Tuning's site.

Show More Show Less

Textar Rear Brake Pad Set - E36, E39

T#:583037

Part#: 34211162536

Ships in 1-2 days

$ 68.26 USD

Add to Wish List

Qty

$ 68.26 USD

Add to Wish List

If it's time to replace your pads, then you should also replace your rotors to get maximum braking performance. With a new pad and rotor set on your vehicle, stopping will be completely restored. Enjoy the stopping you liked when you first obtained your vehicle. With new pads and rotors, you need to make sure they are bedded and mated with each other. To be sure they are, follow the brake pad bedding procedure on ECS Tuning's site.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #3 - Black

T#:401442

Part#: IRPHB-3B

Special Order: No Guaranteed ETA

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

Textar Q+ Brake Pad Set - Rear

T#:5175737

Part#: 2148703

Ships in 1 Business Day

$ 90.72 USD

Add to Wish List

Qty

$ 90.72 USD

Add to Wish List

Brake pads are a common wear item, and regardless of driving habits, will have to be replaced eventually. When your pads wear down, or even become noisy, replace them to keep your vehicle's stopping ability at full potential, to ensure safe driving.

Show More Show Less

Turbo Lubricant Anti-Seize - 8oz w/ Brush

T#:215381

Part#: 80-150A

Ships in 7 Business Days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Turbo Anti-Seize may be used on all bolts, studs, valve shafts, transmission shafts, valve assemblies, and other types of assembly work where protection against seizing, galling or corrosion is desired. It is also slow drying, stays flexible, and withstands pressure to 5000 psi. Operates well in temperatures excess of 2000 degrees Fahrenheit.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black

T#:401445

Part#: IRPHB-5B

Special Order: No Guaranteed ETA

$ 730.99 USD

Add to Wish List

Qty

$ 730.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #4 - Black

T#:401441

Part#: IRPHB-4B

Special Order: No Guaranteed ETA

$ 275.99 USD

Add to Wish List

Qty

$ 275.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black and Gold ...

T#:401447

Part#: IRPHB-5BG

Special Order: No Guaranteed ETA

$ 695.99 USD

Add to Wish List

Qty

$ 695.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #4 - Gold

T#:401446

Part#: IRPHB-4G

Special Order: No Guaranteed ETA

$ 254.99 USD

Add to Wish List

Qty

$ 254.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

IRP Universal Hydraulic Handbrake Fly-Off #5 - Black and Silver ...

T#:401448

Part#: IRPHB-5BS

Special Order: No Guaranteed ETA

$ 695.99 USD

Add to Wish List

Qty

$ 695.99 USD

Add to Wish List

Hydraulic handbrakes are a necessity for any track car that will be drifted or will need the rear brakes isolated for any reason. The stock hand brakes aren't nearly powerful enough to apply the force needed for ample stopping power due to their drum brake design, the brake cable tends to stretch and snap over time, and if the button accidentally catches, the hand brake may lock of the wheels longer than desired.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Brakes & Brake Parts for BMW 5 Series E39 (1996-2003)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results