Packaged by Turner for BMW 5 Series E39 (1996-2003)

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes Redline D4 ATF, the transmission filter, gasket and bolts.

Kit Includes:

• Automatic transmission filter with associated hardware
• Oil pan gasket
• Drain plug with sealing washer
• Fill plug with sealing washer
• 6 quarts Redline D4 automatic transmission fluid

Fits the following BMWs:
E31 BMW 840Ci (up to 09/1996), 850Ci
E32 BMW 740i/iL
E34 BMW 540i
E39 BMW 540i (up to 01/1997)
E38 BMW 740i/iL (up to 01/1997), 750iL

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

Fits the following BMW's

E39 540i 

The S62 engine has a known history of rod bearing failure. If your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing, a failure that has the potential to trash your crankshaft.

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!

Kit Includes:

Turner Motorsport "Race Series" WPC-Treated Rod Bearing Shells (16) Genuine BMW Connecting Rod Bolts (16) OEM Hengst Oil Filter Kit Castrol Edge Euro Car Engine Oil (10w-60) - 7 Quarts Turner Oil Change Decal Elring Oil Pan Gasket Permatex Ultra Slick Engine Assembly Lube (4 oz.)

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
1996-2003 E39 BMW M5

Experience peace of mind with Achilles Motorsports' upgraded oil pump shaft kit, designed specifically to address the well-known harmonics-related issues plaguing the M54 engine. Say goodbye to worries about oil pump shaft failures causing sudden oil pressure drops.

Achilles Motorsports goes above and beyond, crafting their oil pump shafts from the toughest materials and subjecting them to rigorous heat treatment processes for maximum strength. The core of this kit features a hardened Chromoly shaft, precision centerless ground to ensure absolute accuracy. What sets this kit apart is its exclusive square key lock system, preventing gear slippage and reinforcing the gear mounting area for added durability.

No more concerns about the oil pump nut coming loose—Achilles Motorsports has replaced it with an extended-length bolt, EDM drilled for safety wire, ensuring a secure fit in all conditions. Avoid costly engine repairs due to oil pump failures by taking proactive measures with this comprehensive upgrade kit.

This kit, curated by the team at Turner Motorsport, includes everything you need for a complete upgrade:

Achilles Motorsports Upgraded Oil Pump Shaft Liqui Moly Molygen 5w-40 Oil (6 liters) Hengst Oil Filter Oil Drain Plug and Reminder Sticker Elring Oil Pan Gasket IWIS Oil Pump Chain Upgrade your M52TU/M54 engine and shield it from potential catastrophic failure with this meticulously crafted upgrade kit from ECS Tuning.

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Mahle-Behr thermostat with gasket
• Thermostat mounting hardware
• 1 liter of coolant

Applications:
1999-2003 E39 528i, 525i, 530i sedan, touring wagon (M52TU engine, M54 engine)
1999-2005 E46 323, 328, 325, 330 sedan, coupe, cabrio, touring wagon (M52TU engine, M54 engine)
2004-2005 E60 525i, 530i sedan, touring wagon (M54 engine)
2001-2006 E53 X5 3.0 (M54 engine)
2004-2006 E83 X3 2.5i X3 3.0i (M54 engine)
1999-2002 Z3 2.3. Z3 2.5i, 2.8 Z3 3.0i (M54 engine)
2003-2005 Z4 2.5i, Z4 3.0 (M54 engine)

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

If you're the proud owner of an M5X-equipped vintage BMW, chances are you're passionate about enhancing your vehicle's performance and longevity. One crucial upgrade that can significantly improve your driving experience is Turner Motorsport's WPC Rod Bearing Replacement Kit, designed for enhanced durability and wear protection. Prevent costly mechanical failures and increase engine life with our WPC-Treated Performance Rod Bearing Service Kit!

Enhanced Durability: The WPC Performance Rod Bearing Replacement Kit is designed with superior materials and manufacturing processes. WPC treatment reinforces the surface of the bearings, making them highly resistant to wear.. This durability ensures your engine will stand the test of time, even under strenuous driving conditions. Improved Performance: By reducing friction and wear, WPC-treated rod bearings allow for smoother and more efficient engine operation. This translates into increased power and responsiveness, providing you with a more exhilarating driving experience. Whether you're tearing up the track or enjoying a spirited weekend drive, you'll notice a difference in your vehicle's performance. Preventative Maintenance: Proactively replacing your rod bearings and bolts with the WPC Performance Kit can prevent potential engine failures. As engines age and accumulate miles, wear and tear become inevitable. These components help you address this issue head-on, preventing costly engine damage and repairs down the road. Long-Term Cost Savings: While the initial investment in a WPC Performance Rod Bearing Replacement Kit may seem substantial, it's a small price to pay for the long-term benefits. Preventing engine failure and costly repairs can save you thousands of dollars over the life of your vehicle, not to mention the peace of mind that comes with knowing your BMW is built for reliability. Included in the kit:

12 - Turner Motorsport WPC-Treated "Race Series" Rod Bearing Shells 1 - Oil Pan Gasket 1 - Oil Filter Kit 1 - Oil Drain Plug 12 - Genuine BMW Connecting Rod Bolts BMW TwinPower Turbo LL-01 5W-30 Engine Oil - 7 liters 1 - Assembly Lube - 4 oz