Packaged by Turner for BMW 5 Series E39 (1996-2003)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Valve Cover Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744072
Part#: 111214373950-KT
In Stock
Sale - Save 20% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD
Free Shipping on orders $49 and up
Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the cover and the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.
Show More Show Less
Wheel Stud Conversion Kit - Full Set - 70mm
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56507797
Part#: 001467ECSB2KT2
In Stock
New Item
$ 247.34 USD
Free Shipping on orders $49 and up
This M12x1.5 stud conversion kit streamlines your wheel swaps, giving you a permanent guide rail every time you mount a wheel. At 70mm in length, these hardened studs provide sufficient thread engagement for track ready setups with or without wheel spacers. Included in the kit is a full set of Mishimoto high-strength 7075-T6 forged aluminum locking lug nuts.
Show More Show Less
JB Racing Lightweight Aluminum Flywheel & Clutch Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677572
Part#: 21217528209-KT
In Stock
$ 1,386.99

This product was last offered at the strikethrough price on
06-04-2026

$ 1,307.99 USD
Free Shipping on orders $49 and up
$ 1,307.99 USD
Free Shipping on orders $49 and up
A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response. This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come.
Show More Show Less

Timing Chain Kit
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with production date from 09/1998
Packaged by Turner - Corporate Logo
T#:15644284
Part#: 07119963355-KT
In Stock
Sale - Save 12% $ 1,058.87

This product was last offered at the strikethrough price on
05-03-2026

$ 934.44 USD
Sale - Save 12%
$ 1,058.87

This product was last offered at the strikethrough price on
05-03-2026

$ 934.44 USD
Timing chain guides are a weak spot in the otherwise bulletproof M62. Common symptoms of worn guides can include excessive vibration or “slap” from the timing chain, and abrasive plastic particles in the oil. Symptoms typically begin to surface between 80,000 and 100,000 miles. If left untouched, worn guides let the timing chain jump out of time, leaving you with a potentially damaged head and larger repair costs. Our chain kit has been assembled for your peace of mind using quality OE parts. From new timing chain guides to a replacement oil pan drain plug, this kit has you covered to assure that all the needed parts are on hand and ready to install. Kit includes: All required Gaskets and seals Camshaft timing chain tensioners with retaining clips Timing chain tensioner for crankshaft-to-camshaft, with sealing washer Timing chain guide rails Water pump hose o-rings Fan shroud rivets Oil separator valve Timing chain – Crankshaft-to-camshafts without master link Cylinder head timing chains 2 Gallons BMW coolant Replacement oil filter with associated o-ring. 8 quarts BMW High Performance 5w30 synthetic oil with ECS magnetic drain plug Crankshaft bolt Valve cover bolt seals Dipstick o-ring
Show More Show Less

High Performance Metal Water Pump & Pulley Kit - M54
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:55749612
Part#: 888010330KT3
In Stock
New Item
$ 299.99 USD
Free Shipping on orders $49 and up
Wheel Stud Conversion Kit - Full Set
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56327204
Part#: 001467ECSBLKT2
In Stock
New Item
$ 193.99 USD
Free Shipping on orders $49 and up
Converting your BMW’s hub assembly to a dedicated wheel stud system makes wheel changes faster, safer, and far less frustrating. This kit pairs a complete set of 56mm hardened wheel studs with striking Blue Mishimoto Aluminum Locking Lug Nuts
Show More Show Less

Performance Ignition Service Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744024
Part#: 12131703228-KT
In Stock
Sale - Save 20% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 257.94 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 257.94 USD
Free Shipping on orders $49 and up
This BMW Ignition coil features core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your BMW engine, but you'll definitely feel the difference. They'll also improve your fuel economy.
Show More Show Less
Valley Pan Service Kit - Level 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777315
Part#: 11141742042-KT
Ships on Oct 7, 2026
$ 464.99

This product was last offered at the strikethrough price on
04-06-2026

$ 456.99 USD
Free Shipping on orders $49 and up
$ 456.99 USD
Free Shipping on orders $49 and up
Valley pan gaskets are a common failure on the M62 motors, Symptoms can include a smell of coolant regularly or a mysterious loss of coolant with no identifiable leaks. This kit contains the basics need to be replaced when doing a valley pan gasket. The included Geba water pump has a metal impeller to replace the failure prone plastic OEM impeller. It is always a good idea to replace the accessory belts when ever they need to be removed to ensure proper tension and belt integrity. Kit includes Valley pan with rubber gasket: updated valley pan alleviates the core of the issue - the design! Valley pan securing hardware Valley pan heat shield Water pipe o-rings Water cross over gaskets Throttle body gasket Geba water pump with gasket Intake gaskets Accessory belt A/C belt
Show More Show Less

Packaged by Turner - Corporate Logo
T#:56471646
Part#: 61131392246KT2
In Stock
New Item
$ 28.75 USD
Free Shipping on orders $49 and up
This targeted harness repair kit allows you to rebuild the ABS sensor interface using genuine BMW terminal hardware. Designed to cure intermittent fault codes, wheel speed signal dropouts, and limp mode triggers
Show More Show Less

Air Adjustment Unit/DISA Valve Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710824
Part#: 11617544805-KT
In Stock
Sale - Save 25% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.87 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.87 USD
Free Shipping on orders $49 and up
A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware
Show More Show Less
Packaged by Turner - Corporate Logo
T#:55317707
Part#: IRPUSSKT2
In Stock
New Item
$ 528.99 USD
Free Shipping on orders $49 and up
Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.
Lemforder Front Curved Control Arm - Left And Right
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56110328
Part#: 31121092609/1KT2
In Stock
New Item
$ 367.99 USD
Free Shipping on orders $49 and up
This replacement kit includes both left and right front curved control arms manufactured by Lemförder, the exact supplier BMW uses on the assembly line.


Packaged by Turner - Corporate Logo
T#:56507816
Part#: 83292158848KT6
In Stock
New Item
$ 21.93 USD
Free Shipping on orders $49 and up
This kit packs one quart of high shear Liqui Moly Race Tech GT1 10w-60 alongside a Genuine BMW Trunk Storage Bag. Whether you're topping off between track sessions or keeping a spare quart handy in your daily driver, this kit secures your oil right where you need it
Show More Show Less
E39 528i 99-00 Build Your Own Maintenance Service Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338721
Part#: TMS14314
In Stock
Starting at $ 124.98 USD
Free Shipping
Starting at $ 124.98 USD
Free Shipping
Don't up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your E39 528i will ensure you get many more miles from your prized BMW.

This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • install or clean magnetic drain plug
  • replace drain bolt crush washer
  • reset oil service/maintenance light
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • MAF/airflow sensor cleaning
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire, including pressure, and tire-changing tools
  • inspect belts for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • lubricate throttle linkage
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
30,000 Mile Major Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
60,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance light
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter replacement
  • engine and A/C serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • inspect main accessory pulleys for cracks
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement

You may also want to pick up these other helpful items:
  • replace your drain plug with a magnetic one
  • Bentley Service Manual
  • Peake Fault Code Scanner and Service Light Reset Tool
    This package fits the following BMWs:
    1999-2000 E39 BMW 528i with manual transmission


    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    DRY Level 3 Timing Chain Kit (no fluids) - M62TU
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:53149921
    Part#: 11311435026NFKT
    In Stock
    New Item
    Sale - Save 4% $ 1,070.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,031.59 USD
    Free Shipping on orders $49 and up
    Sale - Save 4%
    $ 1,070.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,031.59 USD
    Free Shipping on orders $49 and up

    Dinan/Bilstein Sport Cup Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56291014
    Part#: E39M5-DINBILKT2
    Ships in 7 Business Days
    New Item
    $ 1,277.95 USD
    $ 1,277.95 USD
    While Dinan opts for custom valved Konis in their S1 package, some prefer pairing Dinan’s lowering springs with Bilstein B8 Performance Plus dampers. You get superior gas pressure handling, monolithic Bilstein build quality, and incredible street compliance all while saving over $800 compared to the full Koni equipped Dinan kit.
    Show More Show Less

    Wheel Stud Conversion Kit - Full Set
    10X Entries Into Our F80 M3 Sweepstakes
    Ideal for vehicles with up to 10mm wheel spacers or those without spacers
    Packaged by Turner - Corporate Logo
    T#:56833323
    Part#: 001467ECSNCKT2
    In Stock at Vendor
    New Item
    $ 193.99 USD
    $ 193.99 USD
    Streamline wheel changes and elevate your vehicle stance with this complete wheel stud conversion kit. Designed to replace factory lug bolts, the heavy duty ECS Tuning hardened steel studs remain threaded directly into the hub for effortless wheel alignment and faster swaps. The kit includes forged Mishimoto lug nuts with a striking Neo Chrome finish and a standard sixty degree conical seat, delivering track ready durability alongside a premium show car aesthetic for all four wheels.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557230
    Part#: E39540BCKT
    Ships in 2 Business Days
    Sale - Save 11% $ 449.99

    This product was last offered at the strikethrough price on
    04-21-2026

    $ 398.70 USD
    Free Shipping
    Sale - Save 11%
    $ 449.99

    This product was last offered at the strikethrough price on
    04-21-2026

    $ 398.70 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less

    Front Suspension Refresh Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710798
    Part#: 32211091723-KT
    Back Ordered
    Sale - Save 7% $ 642.99

    This product was last offered at the strikethrough price on
    03-09-2026

    $ 599.40 USD
    Free Shipping on orders $49 and up
    Sale - Save 7%
    $ 642.99

    This product was last offered at the strikethrough price on
    03-09-2026

    $ 599.40 USD
    Free Shipping on orders $49 and up
    Symptoms include a loose and imprecise feel to the steering, as well as excessive shaking and vibration through the steering that increases with speed and braking. Individuals may also experience squeaking, whining or grinding from the front when turning at slow speeds. Other symptoms include a knocking or "clunking" in the front over rough road related to the sway bar bushings and upper strut mounts. With the proper tools, replacement of these components will take approximately 1 day.
    Show More Show Less
    Wheel Stud Conversion Kit - Full Set
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56833332
    Part#: 001467ECSS2KT2
    Ships in 3 Business Days
    New Item
    $ 193.99 USD
    Free Shipping on orders $49 and up
    Change out your wheels faster and easier with a stud conversion

    Cooling System overhaul Kit - E39 528i From 09/1998
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:554546
    Part#: 11517527910KT17
    Ships in 1 Business Day
    Sale - Save 5% $ 1,016.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 969.76 USD
    Sale - Save 5%
    $ 1,016.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 969.76 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E39 528i with the M52 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

     

    This kit fits the following BMWs:

    09/1998 - 2000 E39 528i

    Show More Show Less

    Wheel Stud Conversion Kit - Full Set
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56833311
    Part#: 001467ECSSVKT2
    Ships in 3 Business Days
    New Item
    $ 173.99 USD
    Free Shipping on orders $49 and up
    ECS wheel studs with silver Mishimoto Aluminum lug nuts!
    Packaged by Turner - Corporate Logo
    T#:338108
    Part#: 34111159895
    Ships in 1 Business Day
    Starting at $ 195.98 USD
    Starting at $ 195.98 USD
    These are a pair of replacement FRONT rotors for E39 540i, E38 740i/iL, E31 850i, and E31 850CSi (see detailed fitment notes below). These are direct replacement rotors from some of the best names in the business and at substantial savings from buying direct from the BMW dealer.

    We offer a choice of brands to satisfy our customer's stringent quality standards -
    Balo - an original supplier to BMW but not sold through the regular BMW dealer network. We buy these from the OEM distributor to bypass the dealer for a hefty discount. These are made to the same specifications and product quality as if it had a BMW logo. The biggest difference is these will not have a corrosion-inhibiting coating so rust will form on the hub and inside the cooling vanes.
    Zimmermann Coated - an OEM type rotor made to the same dimensions and specs as the original design. These rotors are manufactured in Europe with a high carbon content for excellent wear and thermal resistance. We like these rotors a lot because the quality is very high and the entire rotor is coated with anti-corrosion layer to prevent rust on the hub and in the cooling vanes.
    Original BMW - the factory BMW rotors that you would buy at any BMW dealer but we offer them at a discounted price. These rotors also have anti-corrosion coating but are not as extensively coated as the Zimmermann. If you want a rotor that is guaranteed to perform like the original equipment what better brand is there?

    These front brake discs / rotors are guaranteed to fit:
    1997-2000 E39 5 Series 540i sedan & touring **up to 3/00 prod date
    1995-2000 E38 7 Series 740i / 740iL **up to 2/00 prod date
    1991-1993 E31 8 Series 850i (**up to 8/93 prod date)
    1994-1995 E31 8 Series 850CSi
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338700
    Part#: TMS14414
    Ships in 1 Business Day
    $ 597.99

    This product was last offered at the strikethrough price on
    06-15-2026

    Starting at $ 587.60 USD
    Free Shipping
    Starting at $ 587.60 USD
    Free Shipping
    This is a compete cooling system overhaul kit, which includes all the common M52 cooling system failure parts bundled into a complete package. This cooling system package is for the 1997-1998 528i with the M52 engine with either the manual or automatic transmission.

    Much of the E39 cooling system is shared with the 3-series cars of the same era. Which means the potential for serious cooling system and engine-related failures. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Our kit includes one OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat, radiator cap, and new radiator hoses.

    Basic Kit Contents:
    17111702969, radiator (OEM Behr)
    11517527799, water pump (OE BMW)
    11537511580, 88�C thermostat (OEM Behr/Hella)
    11531740832, upper radiator hose (OEM Rein/CRP)
    11531740481, lower radiator hose (OEM Rein/CRP)
    17111427156, expansion tank hose (OEM Rein/CRP)
    17111742231, expansion tank cap (OEM Behr/Hella)

    Cooling Kit Options:
    E39 Water Pump Options
    (click to expand)
    OE BMW with composite impeller. The original BMW water pumps had plastic impellers which degraded and failed. The latest design uses composites that are much better and will not corrode. Compared to a metal impeller, the composite is lighter so it's more efficient and it will not wear out the bearings. We don't even offer the metal impeller pumps with this kit because the BMW composite one is so much better.
    Stewart high performance. The ultimate in M50 water pumps! It features a stainless steel impeller, heavy-duty bearings, a better o-ring seal, and flows 20% more than the stock pump. If indestructible is what you're looking for, this is the pump to go with. It also comes with a lifetime warranty for piece of mind.
    E39 Expansion Tank
    (click to expand)
    The original expansion tank is prone to cracks and leakage. Again - it's made from a weak plastic. The material has improved over the years but the only option remains an OEM plastic tank. It's a good idea to replace it if you're doing a whole overhaul. Don't re-use the original tank if you're going to the trouble of replacing everything else!
    E39 Thermostat Housing
    (click to expand)
    The original BMW plastic thermostat housing is brittle and does not seal well. We only sell it under protest. Instead we've been selling this aluminum housing for the last 20+ years. The aluminum does not have the same shortcomings as the plastic one. We made this item an option in case you already have the aluminum housing.

    Use the options below to build your cooling package.

    This cooling system overhaul kit fits the following BMWs:
    1997-1998 E39 BMW 528i
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:2888
    Part#: TMS2888
    Ships in 3 Business Days
    Sale - Save 3% $ 736.00

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 713.92 USD
    Sale - Save 3%
    $ 736.00

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 713.92 USD
    1999-2000 E39 528i Stage 1 Performance Package
    Peak Power Gain: +14hp / +11ft-lbs
    Rev limit: 7000
    Octane: 91 or higher

    Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

    The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

    Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

    Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

    1999-2000 E39 528i Stage 1 Engine Upgrade includes:
    aFe Cold Air Intake (filter, heat shield, intake tube)
    Shark Injector performance software

    Applications:
    1999-2000 E39 528i sedan (M52tu engine)
    Show More Show Less
    Front & Rear Brake Service Kit - E39 M5
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:29898495
    Part#: 34112229527KT4
    Ships in 5 Business Days
    Sale - Save 18% $ 803.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 656.82 USD
    Sale - Save 18%
    $ 803.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 656.82 USD
    Restore your BMW's braking system to its original performance with this Packaged by Turner OE Front & Rear Brake Service Kit. Expertly crafted for precise fitment and dependable performance, this kit contains everything needed for a complete front brake overhaul, ensuring maximum braking efficiency and safety. Top Features: Comprehensive Package: Includes premium brake pads, rotors, and all required hardware for a thorough front and rear brake service. OE Specification: Built to original equipment standards for perfect compatibility and exceptional performance. High-Quality Materials: Made from robust materials designed to endure high temperatures and reduce wear, guaranteeing long-lasting brake functionality. Improved Safety: Engineered to deliver consistent and powerful stopping power, enhancing overall vehicle safety and control. User-Friendly Installation: Comes with all necessary components for a smooth and easy installation process. Advantages: Revitalizes Braking Performance: Upgrading worn-out parts with OE-standard components ensures your braking system operates at peak efficiency. Dependable Operation: Each part is precisely manufactured to meet or surpass original equipment specifications. Economical Maintenance: This all-inclusive kit provides a cost-effective solution for maintaining your vehicle’s brake system. Gain assurance with unmatched stopping power and reliability. Essential for preserving your vehicle's safety and performance, this kit is a must-have for any BMW owner's maintenance routine. For a detailed list of included components, please refer to the "Kit Contents" tab.
    Show More Show Less
    Driveshaft Overhaul Kit - With Giubo and CSB - E34, E36, E39, F54, F6...
    For vehicles with manual transmission and production date from 09/1996
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41458827
    Part#: 26111227869TKT
    Ships in 3 Business Days
    Sale - Save 26% $ 242.99

    This product was last offered at the strikethrough price on
    04-20-2026

    $ 180.37 USD
    Free Shipping on orders $49 and up
    Sale - Save 26%
    $ 242.99

    This product was last offered at the strikethrough price on
    04-20-2026

    $ 180.37 USD
    Free Shipping on orders $49 and up
    This Driveshaft Flex Disc and Center Support Bearing Kit includes a high-quality giubo, durable center support bearing (CSB), and all essential installation hardware. Designed for precise fitment, this kit restores drivetrain stability, reduces vibration, and ensures reliable performance in BMW driveline repairs.
    Show More Show Less

    Cup Kit/Coilover Installation Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:638359
    Part#: 31311139453KT3
    In Stock
    Sale - Save 8% $ 426.99

    This product was last offered at the strikethrough price on
    04-30-2026

    $ 392.86 USD
    Free Shipping
    Sale - Save 8%
    $ 426.99

    This product was last offered at the strikethrough price on
    04-30-2026

    $ 392.86 USD
    Free Shipping
    This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

    BMW Jack Pad With ECS Adapter Kit - E38, E39, E53
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56616322
    Part#: ECS10721KT
    Ships in 1 day
    New Item
    Sale - Save 6% $ 101.99

    This product was last offered at the strikethrough price on
    08-27-2026

    $ 95.96 USD
    Free Shipping on orders $49 and up
    Sale - Save 6%
    $ 101.99

    This product was last offered at the strikethrough price on
    08-27-2026

    $ 95.96 USD
    Free Shipping on orders $49 and up
    This kit solves the problem for good. By pairing a full set of replacement chassis jack pads with an ECS billet jack pad adapter, you convert those delicate factory square sockets into a solid, standard round surface that works with virtually any floor jack in your garage. No more crushed plastic
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:556187
    Part#: E39I6DMKT
    Ships in 3 Business Days
    Sale - Save 2% $ 212.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 209.36 USD
    Free Shipping
    Sale - Save 2%
    $ 212.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 209.36 USD
    Free Shipping

    Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder mounts are perfect to eliminate these problems and provide long lasting reliability.

    Included in this kit:

    • OEM Lemforder Engine Mount (x2)
    • OEM Lemforder Automatic Transmission Mount (x2)
    • New Installation Hardware
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:23416509
    Part#: 11287833264TKT
    Ships in 2 Business Days
    $ 665.99 USD
    Free Shipping on orders $49 and up
    Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and the hardware required to install the new tensioner. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
    Show More Show Less
    Thermostat Housing with Gasket - E39 528i
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:3915
    Part#: 11531740478K
    In Stock
    $ 22.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 13.99 USD
    Free Shipping on orders $49 and up
    $ 13.99 USD
    Free Shipping on orders $49 and up
    Don't take chances! Proper maintenance is required to keep your BMW performing at peak levels. The thermostat basically controls when your car will overheat. Includes gasket part number 11531740437. This fits the 1997 through 9/98 E39 528i only.

    This thermostat housing fits the following BMWs:
    1997-1998 E39 BMW 528i
    Show More Show Less

    Driveshaft Overhaul Kit - With Giubo and CSB - E39 540i
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41255916
    Part#: 26111229065TKT
    In Stock
    $ 418.99

    This product was last offered at the strikethrough price on
    08-25-2026

    $ 417.99 USD
    Free Shipping on orders $49 and up
    $ 417.99 USD
    Free Shipping on orders $49 and up
    Comes with a flex disc (giubo), a precision-engineered center support bearing (CSB), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

    Packaged by Turner - Corporate Logo
    T#:556186
    Part#: E39I6DMKT2
    Ships in 3 Business Days
    Sale - Save 2% $ 182.99

    This product was last offered at the strikethrough price on
    08-19-2026

    $ 179.55 USD
    Free Shipping
    Sale - Save 2%
    $ 182.99

    This product was last offered at the strikethrough price on
    08-19-2026

    $ 179.55 USD
    Free Shipping

    Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder mounts are perfect to eliminate these problems and provide long lasting reliability.

    Included in this kit:

    • OEM Lemforder Engine Mount (x2)
    • OEM Lemforder Manual Transmission Mount (x2)
    • New Installation Hardware
    Show More Show Less
    BMW Jack Pad Set with Jack Adapter - E53, E38, E39
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56544001
    Part#: 51717001650KT
    Ships in 1 day
    New Item
    Sale - Save 6% $ 101.99

    This product was last offered at the strikethrough price on
    08-27-2026

    $ 95.96 USD
    Free Shipping on orders $49 and up
    Sale - Save 6%
    $ 101.99

    This product was last offered at the strikethrough price on
    08-27-2026

    $ 95.96 USD
    Free Shipping on orders $49 and up
    Avoid damaging your factory lifting points with this Jack Pad set. Standard floor jacks crush plastic factory jack pads. Broken pads lead to unstable lifting points and rocker panel damage.
    Thermostat Replacement Kit - E39 540i 1999-2003
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:554085
    Part#: 11531436386KT3
    In Stock
    Sale - Save 24% $ 119.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 91.11 USD
    Free Shipping
    Sale - Save 24%
    $ 119.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 91.11 USD
    Free Shipping

    When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

    Kit includes:

    • Rein thermostat
    • Thermostat mounting hardware
    • 1 liter of coolant

     

    This item fits the following BMWs: 
    1999-2003  E39 BMW  540i 
     

    Show More Show Less


    Automatic Transmission Service Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710776
    Part#: 8352230504-KT
    Ships in 3 Business Days
    Sale - Save 2% $ 229.99

    This product was last offered at the strikethrough price on
    07-28-2026

    $ 225.03 USD
    Free Shipping on orders $49 and up
    Sale - Save 2%
    $ 229.99

    This product was last offered at the strikethrough price on
    07-28-2026

    $ 225.03 USD
    Free Shipping on orders $49 and up
    Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Automatic transmission Level II kit contains what you need to do an automatic transmission fluid and filter service. For limited time includes a FREE bottle of Redline WaterWetter®! WaterWetter® is a unique wetting agent that reduces coolant temperatures by as much as 30°F. Pour it into your cooling system to provide rust and corrosion protection in plain water for racing engines, and to improve coolant heat transfer properties. Add it to new or used antifreeze to improve the heat transfer of both ethylene and propylene glycol antifreeze/coolants. Compatible with aluminum, cast iron, copper, brass and bronze components. Kit Includes: Automatic transmission filter with hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 8 quarts Redline D4 automatic transmission fluid FREE bottle of Redline WaterWetter®
    Show More Show Less
    Thermostat Replacement Kit - E39 540i 1996-1998
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:554083
    Part#: 11531437526KT2
    Ships in 2 Business Days
    Sale - Save 2% $ 189.99

    This product was last offered at the strikethrough price on
    05-29-2026

    $ 186.20 USD
    Free Shipping
    Sale - Save 2%
    $ 189.99

    This product was last offered at the strikethrough price on
    05-29-2026

    $ 186.20 USD
    Free Shipping

    When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

    Kit includes:

    • Behr thermostat with O-ring
    • Thermostat mounting hardware
    • 1 Gallon BMW coolant

     

    This item fits the following BMWs: 

    1997-1998  E39 BMW  540i

     

     

    When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

    Kit includes:

    • Behr thermostat with O-ring
    • Thermostat mounting hardware
    • 1 Gallon BMW coolant
    Show More Show Less
    Turner OEM Clutch Installation Kit - E39 M5
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:554598
    Part#: E39M5CIKT
    Ships in 6 Business Days
    $ 954.99

    This product was last offered at the strikethrough price on
    04-06-2026

    $ 824.99 USD
    Free Shipping
    $ 824.99 USD
    Free Shipping

    When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

    Included in this kit:

    • All needed hardware
    • Transmission mounts
    • Clutch fork pivot pin
    • Universal flex disc (AKA Guibo) with hardware
    • Driveshaft center carrier
    • Pilot bearing
    • Exhaust Pipe Gaskets

    Fits the following BMWs:
    E39 BMW
     M5 S62

    Show More Show Less

    Idle Control Valve Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15744026
    Part#: 11611437453-KT
    In Stock
    $ 173.13 USD
    Free Shipping on orders $49 and up
    Located in the intake system, this part is a common source of idle issues. This kit includes a new mount and idle control valve grommet

    VANOS Solenoid Gasket Kit - E39 - S62
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56507836
    Part#: 11367830828KT3
    Ships in 3 Business Days
    New Item
    $ 201.99 USD
    Free Shipping on orders $49 and up
    We’ve bundled the exact high temp o-rings and Victor Reinz gaskets required to reseal your S62 VANOS solenoids and main unit.
    Turner Comprehensive Power Steering Service Kit - E39 525/528/530 M52...
    For vehicles with production date from 09/1998
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:568968
    Part#: E396CYLPSSKT
    Ships in 3 Business Days
    $ 551.99

    This product was last offered at the strikethrough price on
    08-12-2026

    $ 544.99 USD
    Free Shipping
    $ 544.99 USD
    Free Shipping
    BMW power steering systems can be a pain when it comes to leaks, especially as the car ages. The hoses break down and the power steering filter in the reservoir becomes contaminated. To restore leak free, smooth operation of your power steering, we offer these Turner Motorsport Comprehensive Power Steering Service Kits. These kits contain all of the items you will need to replace old components with new OEM quality hoses, seals, and a new reservoir as well as the recommended power steering fluid for your BMW! This kit is great for routine maintenance or for when replacing your power steering pump or steering rack!
    Show More Show Less

    Value Heater Control Valve kit - E39
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56507842
    Part#: 64128374995KT2
    Ships in 4 Business Days
    New Item
    $ 104.06 USD
    Free Shipping on orders $49 and up
    Engineered for the enthusiast who demands total reliability and value, this kit combines proven components to completely revitalize your HVAC cooling circuit. We spec this package with dual Elaplast hoses and a Bremman heater control valve to ensure a value yet rock solid option for temperature regulation
    Show More Show Less
    Heater Control Valve kit - E39
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:56507852
    Part#: 64128374995KT3
    Ships in 4 Business Days
    New Item
    $ 179.08 USD
    $ 179.08 USD
    This overhaul kit replaces aging, soft failure prone factory plumbing with fresh Elaplast hoses, a high durability Febi heater control valve, and ECS stainless band clamps. Built to maintain proper cooling system pressure
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583046
    Part#: T33326768791KT
    Ships in 8 Business Days
    $ 724.99

    This product was last offered at the strikethrough price on
    07-08-2026

    $ 699.99 USD
    Free Shipping
    $ 699.99 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Control Arms
    Ball Joints
    Rear Shock Mounts
    Hardware

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583047
    Part#: T33326768791KT1
    Ships in 8 Business Days
    $ 885.99

    This product was last offered at the strikethrough price on
    08-11-2026

    $ 843.99 USD
    Free Shipping
    $ 843.99 USD
    Free Shipping

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 1 kit replaces:

    Rear Upper Control Arms
    Ball Joints
    Shock Mounts
    Hardware

    Show More Show Less
    Complete Front & Rear Brake Package - E39 530i
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:350947
    Part#: TMS123
    Ships in 5 Business Days
    $ 574.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 542.82 USD
    Free Shipping
    Starting at $ 542.82 USD
    Free Shipping

    This brake package for the late-production E39 530i comes with everything you need to perform a major brake overhaul -

    Front and rear rotors with hardware - OEM, cross-drilled, slotted, or drilled+slotted
    Front and rear brake pads - Axxis/PBR Metal Master, Axxis/PBR Ultimate, StopTech High Performance
    Front and rear pad wear sensors
    Brake fluid Ate Type 200 (OEM supplier).

    Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

    In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.
     

    Brake Package FAQ

    Brake Pad Buying Guide

    Brake Rotor Buying Guide

     


    530i Brake Package fits the following BMWs:
    2001-2003 E39 BMW 530i

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:350946
    Part#: TMS4728
    Ships in 5 Business Days
    $ 499.99

    This product was last offered at the strikethrough price on
    06-09-2026

    Starting at $ 488.50 USD
    Starting at $ 488.50 USD

    This brake package for the early-production E39 540i comes with everything you need to perform a major brake overhaul -

    Front and rear rotors with hardware - OEM, cross-drilled, slotted, or drilled+slotted
    Front and rear brake pads - Axxis/PBR Metal Master, Axxis/PBR Ultimate, StopTech High Performance
    Front and rear pad wear sensors
    Brake fluid Ate Type 200 (OEM supplier).

    Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

    In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.
     

    Brake Package FAQ

    Brake Pad Buying Guide

    Brake Rotor Buying Guide

     


    540i Brake Package fits the following BMWs:
    1997-2/00 E39 BMW 540i

    Show More Show Less


    Complete Front & Rear Brake Package - E39 540i 3/2000-2003
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340174
    Part#: TMS418
    Ships in 5 Business Days
    $ 583.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 551.62 USD
    Free Shipping
    Starting at $ 551.62 USD
    Free Shipping
    This brake package for the late-production E39 540i (3/00 and later production) comes with everything you need to perform a major brake overhaul -

    Front and rear rotors with hardware - OEM, cross-drilled, slotted, drilled+slotted
    Front and rear brake pads - Axxis/PBR Metal Master, Hawk HPS, Axxis/PBR Ultimate, StopTech Street Performance
    Front and rear pad wear sensors
    Brake fluid Ate Type 200 (OEM supplier).

    Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

    In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

    Brake Package FAQ
    Brake Pad Buying Guide
    Brake Rotor Buying Guide


    540 Brake Package Applications:
    3/00-03 E39 540i sedan, 540i touring
    Show More Show Less
    O2 Sensor Bung and Plug
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:339000
    Part#: TEN9949O2S
    Ships in 6 Business Days
    Starting at $ 12.95 USD
    Free Shipping on orders $49 and up
    Starting at $ 12.95 USD
    Free Shipping on orders $49 and up
    This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing.