Packaged by Turner for BMW 5 Series E39 (1996-2003)

Don't up with the maintenance on your car is the smart thing to do. For one thing, it prevents costly repairs in the future. For another, your car performs better, making aftermarket upgrades more worthwhile. And a well-maintained car with complete service records can add substantially to a car's resale value. Our service packages for your M5 will ensure you get many more miles from your BMW muscle car.

The M5 is a special car in BMW's line-up and it takes special attention to maintain its lofty output. Looking after the M5's various needs and problem areas will reward you with a better M ownership experience and make your car stand out from less cared-for cars if/when it's time to sell. In addition to the normal maintenance items listed below, you may also want to check or replace the following:
+ fuel pump (especially if the car is hard to start or stumbles in the RPM range)
+ front (pre-cat) oxygen sensors
+ check valve cover gaskets, intake plenum seals, vacuum lines, and hoses for leaks
+ service or replace crankcase vent valve/oil separator system
+ VAN0S solenoid rebuild or replacement
+ have an engine oil analysis done annually. This will make it easier to spot internal engine wear, including rod bearing wear, as well as head gasket failure and coolant loss.
+ replace camshaft position sensors
+ secondary air pump system test or service
If you haven't read about the M5's carbon build-up issue, visit our write-up by clicking here.

This package can be configured any number of ways to ensure you get what you need for a full Inspection I, Inspection II, or any other major preventative maintenance service. Our parts are OE, OEM, or performance alternatives that we have been using since 1993 so you get top quality parts, first-rate service, and unbeatable expertise.
 

5,000 Mile Oil Service

(click to expand)

• engine oil change with filter, using OE BMW 5W30, BMW-Castrol 10W60, or Motul
• install or clean magnetic drain plug
• replace drain bolt crush washer
• reset oil service/maintenance light
• inspect and top off any other fluids

Annual Service

(click to expand)

• air filter cleaning or replacement
• airflow sensor/MAF cleaning
• engine oil analysis (to check for internal engine wear)
• A/C microfilter/cabin filter replacement
• brake fluid flush/bleeding
• top off power steering fluid
• wiper blade replacement
• lubricate door hinges and treat rubber door seals
• inspect M Mobility System and emergency tools
• inspect belts for cracking or stretching
• inspect intake boots and vacuum lines for cracks
• inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
• inspect bushings and ball joints for excess play/movement, especially the front thrust arm bushings and rear sway bar mounts
• ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

30,000 Mile Major Service

(click to expand)

• engine oil change with filter, using OE BMW 5W30, BMW-Castrol 10W60, or Motul
• reset oil service/maintenance light
• air filter replacement or cleaning for aFe/K&N type
• fill and bleed cooling system
• transmission fluid change, using Red Line ATFD4 or Motul ATF
• differential fluid change, using Red Line 75/140 or Motul GearComp 75/140, or OEM oils
• brake fluid flush/bleeding
• fuel filter replacement
• engine and A/C serpentine belt replacement
• inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
• complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
• complete brake system test and inspection
• engine and transmission leak detection and diagnosis
• shifter linkage, driveshaft guibo, u-joint, CV joint, and center support bearing inspection
• exhast system inspection, including hanger replacement

60,000 Mile Major Service

(click to expand)

• spark plug replacement
• ignition coil and coil boot inspection and replacement
• engine oil change with filter, using OE BMW 5W30, BMW-Castrol 10W60, or Motul
• reset oil service/maintenance light
• air filter replacement or cleaning for aFe/K&N type
• fill and bleed cooling system
• transmission fluid change, using Red Line ATFD4 or Motul ATF
• differential fluid change, using Red Line 75/140 or Motul GearComp 75/140, or OEM oils
• brake fluid flush/bleeding
• fuel filter replacement
• engine and A/C serpentine belt replacement
• replace belt roller pulleys and belt tensioners
• inspect main accessory pulleys for cracks
• complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear arm bushings, rear shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
• complete brake system test and inspection
• engine and transmission leak detection and diagnosis
• shifter linkage, driveshaft guibo, CV, and center support bearing inspection
• exhast system inspection, including hanger replacement

You may also want to pick up these other helpful items:

• replace your drain plug with a magnetic one
• Bentley Service Manual
• Peake Fault Code Scanner and Service Light Reset Tool
  
• This package fits the following BMWs:
  1998-2003 E39 BMW M5
  
  
  Put a check in the boxes next to the items you wish to order.

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

• Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
• Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
• Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
• Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

• Turner Motorsport Magnetic Fender Cover
• Schwaben 6.5L Fluid Extractor
• Schwaben 14mm/17mm Service Wrench
• Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

1989-1995 BMW E34 530i 540i  
1996-2004 BMW E39 535i 
1986-1994 BMW E32 730i 740i 
1995-2001 BMW E38 730i 735i 740i 750i/750iL/L7 
1990-1999 BMW E31 840i 850Ci
2000-2006 BMW E53 X5 ​

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

8 Liters of Liqui-Moly Longtime High Tech 5w-30 Engine Oil
Hengst Oil Filter
Febi Oil Drain Plug & Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

• Smooth engine running characteristics
• Long engine service life due to exceptional protection against wear
• Rapid oil delivery at low temperatures
• Optimum oil pressure at all engine speeds
• Premium lubrication reliability at high and low temperatures
• High shear and ageing stability
• Reduces fuel consumption and pollutant emissions
• Outstanding engine cleanliness
• Tested with catalytic converters and performance proven with turbochargers
• Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

• ACEA C3
• API SN / CF
• BMW Longlife-04
• MB-Approval 229.51
• VAG 502.00 / 505.00

Recommended for the following specifications:

• ACEA A3 / B4
• MB 229.31
• VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.